diff options
Diffstat (limited to 'meta-rcar-gen3/docs')
34 files changed, 8208 insertions, 0 deletions
diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..1f76008 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local-wayland.conf @@ -0,0 +1,271 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf new file mode 100644 index 0000000..e5e2026 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/bsp/local.conf @@ -0,0 +1,262 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf new file mode 100644 index 0000000..aa63d8e --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/gfx-only/local-wayland.conf @@ -0,0 +1,283 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Fix the Warning of gstreamer plugins +RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf new file mode 100644 index 0000000..d5db020 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/linaro-gcc/mmp/local-wayland.conf @@ -0,0 +1,372 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" + +# Enable Multimedia features +MACHINE_FEATURES_append = " multimedia" + +# for gstreamer omx plugins +LICENSE_FLAGS_WHITELIST = "commercial" +# for mmp test program +DISTRO_FEATURES_append = " mm-test" + +# for weston v4l2 renderer +#DISTRO_FEATURES_append = " v4l2-renderer" + +# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C) +#DISTRO_FEATURES_append = " h263dec_lib" + +# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C) +DISTRO_FEATURES_append = " h264dec_lib" + +# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C) +#DISTRO_FEATURES_append = " h264enc_lib" + +# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C) +#DISTRO_FEATURES_append = " h265dec_lib" + +# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C) +#DISTRO_FEATURES_append = " mpeg2dec_lib" + +# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C) +#DISTRO_FEATURES_append = " mpeg4dec_lib" + +# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C) +#DISTRO_FEATURES_append = " vc1dec_lib" + +# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C) +#DISTRO_FEATURES_append = " divxdec_lib" + +# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C) +#DISTRO_FEATURES_append = " rvdec_lib" + +# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C) +#DISTRO_FEATURES_append = " alacdec_lib" + +# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C) +#DISTRO_FEATURES_append = " flacdec_lib" + +# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C), +# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C) +DISTRO_FEATURES_append = " aaclcdec_lib" +DISTRO_FEATURES_append = " aaclcdec_mdw" + +# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C), +# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C) +#DISTRO_FEATURES_append = " aacpv2dec_lib" +#DISTRO_FEATURES_append = " aacpv2dec_mdw" + +# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C), +# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C) +#DISTRO_FEATURES_append = " mp3dec_lib" +#DISTRO_FEATURES_append = " mp3dec_mdw" + +# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C), +# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C) +#DISTRO_FEATURES_append = " wmadec_lib" +#DISTRO_FEATURES_append = " wmadec_mdw" + +# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C) +# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C) +#DISTRO_FEATURES_append = " aaclcenc_lib" +#DISTRO_FEATURES_append = " aaclcenc_mdw" + +# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C), +# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C) +#DISTRO_FEATURES_append = " dddec_lib" +#DISTRO_FEATURES_append = " dddec_mdw" + +# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C) +#DISTRO_FEATURES_append = " cmsbcm" + +# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C) +#DISTRO_FEATURES_append = " cmsblc" + +# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C) +#DISTRO_FEATURES_append = " cmsdgc" + +# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C) +#DISTRO_FEATURES_append = " dtv" + +# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C) +#DISTRO_FEATURES_append = " dvd" + +# ADSP Driver for Linux (RCG3AHPDL4001ZDO) +# ADSP Interface for Linux (RCG3AHIFL4001ZDP) +# ADSP Framework (RCG3AHFWN0101ZDP) +#DISTRO_FEATURES_append = " adsp" + +# AVB Software Package for Linux +#DISTRO_FEATURES_append = " avb" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" + +# Evaluation packages +#DISTRO_FEATURES_append = " use_eva_pkg" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..3b2c068 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/bblayers.conf @@ -0,0 +1,15 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + ${TOPDIR}/../meta-linaro/meta-optee \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..b01fb82 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf @@ -0,0 +1,264 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf new file mode 100644 index 0000000..c7128c4 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf @@ -0,0 +1,255 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "h3ulcb" + +SOC_FAMILY = "r8a7795" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..054c44b --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local-wayland.conf @@ -0,0 +1,271 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf new file mode 100644 index 0000000..9583dd6 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/bsp/local.conf @@ -0,0 +1,262 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf new file mode 100644 index 0000000..fdf452c --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/gfx-only/local-wayland.conf @@ -0,0 +1,283 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Fix the Warning of gstreamer plugins +RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf new file mode 100644 index 0000000..205c6df --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/linaro-gcc/mmp/local-wayland.conf @@ -0,0 +1,372 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" + +# Enable Multimedia features +MACHINE_FEATURES_append = " multimedia" + +# for gstreamer omx plugins +LICENSE_FLAGS_WHITELIST = "commercial" +# for mmp test program +DISTRO_FEATURES_append = " mm-test" + +# for weston v4l2 renderer +#DISTRO_FEATURES_append = " v4l2-renderer" + +# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C) +#DISTRO_FEATURES_append = " h263dec_lib" + +# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C) +DISTRO_FEATURES_append = " h264dec_lib" + +# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C) +#DISTRO_FEATURES_append = " h264enc_lib" + +# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C) +#DISTRO_FEATURES_append = " h265dec_lib" + +# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C) +#DISTRO_FEATURES_append = " mpeg2dec_lib" + +# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C) +#DISTRO_FEATURES_append = " mpeg4dec_lib" + +# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C) +#DISTRO_FEATURES_append = " vc1dec_lib" + +# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C) +#DISTRO_FEATURES_append = " divxdec_lib" + +# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C) +#DISTRO_FEATURES_append = " rvdec_lib" + +# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C) +#DISTRO_FEATURES_append = " alacdec_lib" + +# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C) +#DISTRO_FEATURES_append = " flacdec_lib" + +# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C), +# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C) +DISTRO_FEATURES_append = " aaclcdec_lib" +DISTRO_FEATURES_append = " aaclcdec_mdw" + +# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C), +# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C) +#DISTRO_FEATURES_append = " aacpv2dec_lib" +#DISTRO_FEATURES_append = " aacpv2dec_mdw" + +# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C), +# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C) +#DISTRO_FEATURES_append = " mp3dec_lib" +#DISTRO_FEATURES_append = " mp3dec_mdw" + +# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C), +# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C) +#DISTRO_FEATURES_append = " wmadec_lib" +#DISTRO_FEATURES_append = " wmadec_mdw" + +# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C) +# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C) +#DISTRO_FEATURES_append = " aaclcenc_lib" +#DISTRO_FEATURES_append = " aaclcenc_mdw" + +# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C), +# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C) +#DISTRO_FEATURES_append = " dddec_lib" +#DISTRO_FEATURES_append = " dddec_mdw" + +# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C) +#DISTRO_FEATURES_append = " cmsbcm" + +# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C) +#DISTRO_FEATURES_append = " cmsblc" + +# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C) +#DISTRO_FEATURES_append = " cmsdgc" + +# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C) +#DISTRO_FEATURES_append = " dtv" + +# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C) +#DISTRO_FEATURES_append = " dvd" + +# ADSP Driver for Linux (RCG3AHPDL4001ZDO) +# ADSP Interface for Linux (RCG3AHIFL4001ZDP) +# ADSP Framework (RCG3AHFWN0101ZDP) +#DISTRO_FEATURES_append = " adsp" + +# AVB Software Package for Linux +#DISTRO_FEATURES_append = " avb" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" + +# Evaluation packages +#DISTRO_FEATURES_append = " use_eva_pkg" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..3b2c068 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/bblayers.conf @@ -0,0 +1,15 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + ${TOPDIR}/../meta-linaro/meta-optee \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..2bd2154 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf @@ -0,0 +1,264 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf new file mode 100644 index 0000000..f682e03 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf @@ -0,0 +1,255 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "m3ulcb" + +SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..1458e29 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local-wayland.conf @@ -0,0 +1,274 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf new file mode 100644 index 0000000..bab7f0c --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/bsp/local.conf @@ -0,0 +1,265 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf new file mode 100644 index 0000000..9a80463 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/gfx-only/local-wayland.conf @@ -0,0 +1,286 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" + +# Fix the Warning of gstreamer plugins +RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf new file mode 100644 index 0000000..96ff8ad --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/bblayers.conf @@ -0,0 +1,16 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-linaro/meta-linaro-toolchain \ + ${TOPDIR}/../meta-linaro/meta-optee \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf new file mode 100644 index 0000000..89b3671 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/linaro-gcc/mmp/local-wayland.conf @@ -0,0 +1,375 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# Linaro GCC +GCCVERSION = "linaro-5.2" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " gsx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston +DISTRO_FEATURES_append = " pam" +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "gles-user-module" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" +BBMASK .= "|mesa-gl" + +# Enable Multimedia features +MACHINE_FEATURES_append = " multimedia" + +# for gstreamer omx plugins +LICENSE_FLAGS_WHITELIST = "commercial" +# for mmp test program +DISTRO_FEATURES_append = " mm-test" + +# for weston v4l2 renderer +#DISTRO_FEATURES_append = " v4l2-renderer" + +# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL40C) +#DISTRO_FEATURES_append = " h263dec_lib" + +# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL40C) +DISTRO_FEATURES_append = " h264dec_lib" + +# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL40C) +#DISTRO_FEATURES_append = " h264enc_lib" + +# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL40C) +#DISTRO_FEATURES_append = " h265dec_lib" + +# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL40C) +#DISTRO_FEATURES_append = " mpeg2dec_lib" + +# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL40C) +#DISTRO_FEATURES_append = " mpeg4dec_lib" + +# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL40C) +#DISTRO_FEATURES_append = " vc1dec_lib" + +# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL40C) +#DISTRO_FEATURES_append = " divxdec_lib" + +# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL40C) +#DISTRO_FEATURES_append = " rvdec_lib" + +# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL40C) +#DISTRO_FEATURES_append = " alacdec_lib" + +# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL40C) +#DISTRO_FEATURES_append = " flacdec_lib" + +# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL40C), +# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL40C) +DISTRO_FEATURES_append = " aaclcdec_lib" +DISTRO_FEATURES_append = " aaclcdec_mdw" + +# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL40C), +# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL40C) +#DISTRO_FEATURES_append = " aacpv2dec_lib" +#DISTRO_FEATURES_append = " aacpv2dec_mdw" + +# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL40C), +# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL40C) +#DISTRO_FEATURES_append = " mp3dec_lib" +#DISTRO_FEATURES_append = " mp3dec_mdw" + +# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL40C), +# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL40C) +#DISTRO_FEATURES_append = " wmadec_lib" +#DISTRO_FEATURES_append = " wmadec_mdw" + +# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL40C) +# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL40C) +#DISTRO_FEATURES_append = " aaclcenc_lib" +#DISTRO_FEATURES_append = " aaclcenc_mdw" + +# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL40C), +# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL40C) +#DISTRO_FEATURES_append = " dddec_lib" +#DISTRO_FEATURES_append = " dddec_mdw" + +# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL40C) +#DISTRO_FEATURES_append = " cmsbcm" + +# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL40C) +#DISTRO_FEATURES_append = " cmsblc" + +# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL40C) +#DISTRO_FEATURES_append = " cmsdgc" + +# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL40C) +#DISTRO_FEATURES_append = " dtv" + +# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL40C) +#DISTRO_FEATURES_append = " dvd" + +# ADSP Driver for Linux (RCG3AHPDL4001ZDO) +# ADSP Interface for Linux (RCG3AHIFL4001ZDP) +# ADSP Framework (RCG3AHFWN0101ZDP) +#DISTRO_FEATURES_append = " adsp" + +# AVB Software Package for Linux +#DISTRO_FEATURES_append = " avb" + +# Linux ICCOM driver (RCG3ZLIDL4001ZNO) +# Linux ICCOM library (RCG3ZLILL4001ZNO) +#DISTRO_FEATURES_append = " iccom" + +# Evaluation packages +#DISTRO_FEATURES_append = " use_eva_pkg" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf new file mode 100644 index 0000000..3b2c068 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/bblayers.conf @@ -0,0 +1,15 @@ +# POKY_BBLAYERS_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +POKY_BBLAYERS_CONF_VERSION = "2" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ${TOPDIR}/../poky/meta \ + ${TOPDIR}/../poky/meta-poky \ + ${TOPDIR}/../poky/meta-yocto-bsp \ + ${TOPDIR}/../meta-renesas/meta-rcar-gen3 \ + ${TOPDIR}/../meta-openembedded/meta-oe \ + ${TOPDIR}/../meta-linaro/meta-optee \ + " diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf new file mode 100644 index 0000000..1520bdb --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf @@ -0,0 +1,267 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# for Wayland/Weston weston-laucher +DISTRO_FEATURES_append = " pam" + +# Mask the wayland related to GFX +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" + +# Mask the gstreamer recipe for MMP +BBMASK .= "|meta-renesas/meta-rcar-gen3/recipes-multimedia/gstreamer" + +# Add for gstreamer plugins ugly +LICENSE_FLAGS_WHITELIST = "commercial" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf new file mode 100644 index 0000000..61f5096 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf @@ -0,0 +1,258 @@ +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemuarm64" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemumips64" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "salvator-x" + +# This sets the SoC +# H3: r8a7795, M3: r8a7796 +SOC_FAMILY = "r8a7795" +#SOC_FAMILY = "r8a7796" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_ipk" + +# +# SDK target architecture +# +# This variable specifies the architecture to build SDK items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +# image-prelink disabled for now due to issues with IFUNC symbol relocation +USER_CLASSES ?= "buildstats image-mklibs" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +# It's necesary to monitor /tmp, if there is no space left the build will fail +# with very exotic errors. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + STOPTASKS,/tmp,100M,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K \ + ABORT,/tmp,10M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# be built, if you want to use your host's libSDL instead of the minimal libsdl built +# by libsdl-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +#ASSUME_PROVIDED += "libsdl-native" + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" + +# Add systemd configuration +DISTRO_FEATURES_append = " systemd" +VIRTUAL-RUNTIME_init_manager = "systemd" + +# add the static lib to SDK toolchain +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Disable optee in meta-linaro layer +BBMASK = "meta-linaro/meta-optee/recipes-security/optee" + +# Mask graphic Pkgs +BBMASK .= "|gles-user-module|kernel-module-gles|wayland-kms|libgbm" +# Mask MMP recipes +BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh new file mode 100755 index 0000000..73b63c6 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh @@ -0,0 +1,1345 @@ +#!/bin/sh + +# Copyright (C) Renesas Electronics Corporation 2016 All rights reserved. + +usage() +{ +cat << EOF + usage: `basename $0` [-f] [-d] source-directory + -f: fource copy. ignore md5check + -d: debug mode + + Ex) + `basename $0` -f my_package_dir +EOF +} + +##### MD5 list ##### +. `dirname $0`/md5list.txt + +##### Library List ##### +# Audio Library +# Please add omx audio library to "_audio_list" +# Don't use space in xxx_name. +# audio_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_audio_list="AAC-LC_decoder_lib,EVARTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \ + aacPlusV2_decoder_lib,EVARTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \ + MP3_decoder_lib,EVARTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \ + WMA_decoder_lib,EVARTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \ + AAC-LC_encoder_lib,EVARTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \ + ALAC_decoder_lib,EVARTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \ + FLAC_decoder_lib,EVARTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \ + Dolby_decoder_lib,EVARTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz" + +# Audio M/W Library +# Please add omx audio library to "_audio_mw_list" +# Don't use space in xxx_name. +# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_audio_mw_list="AAC-LC_decoder_M/W,EVARTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \ + aacPlusV2_decoder_M/W,EVARTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \ + MP3_decoder_M/W,EVARTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \ + WMA_decoder_M/W,EVARTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \ + AAC-LC_encoder_M/W,EVARTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \ + DDD_decoder_M/W,EVARTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz" + +# Video Decoder Library +# Please add omx video decoder library to "_video_dec_list" +# Don't use space in xxx_name. +# video_dec_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_video_dec_list="H263_decoder,EVARTM0AC0000XV263D30SL40C,EVARTM0AC0000XV263D30SL40C.tar.bz2 \ + H264_decoder,EVARTM0AC0000XV264D30SL40C,EVARTM0AC0000XV264D30SL40C.tar.bz2 \ + H265_decoder,EVARTM0AC0000XV265D30SL40C,EVARTM0AC0000XV265D30SL40C.tar.bz2 \ + MPEG2_decoder,EVARTM0AC0000XVM2VD30SL40C,EVARTM0AC0000XVM2VD30SL40C.tar.bz2 \ + MPEG4_decoder,EVARTM0AC0000XVM4VD30SL40C,EVARTM0AC0000XVM4VD30SL40C.tar.bz2 \ + VC1_decoder,EVARTM0AC0000XVVC1D30SL40C,EVARTM0AC0000XVVC1D30SL40C.tar.bz2 \ + DivX_decoder,EVARTM0AC0000XVDVXD30SL40C,EVARTM0AC0000XVDVXD30SL40C.tar.bz2 \ + RealVideo_decoder,EVARTM0AC0000XVRLVD30SL40C,EVARTM0AC0000XVRLVD30SL40C.tar.bz2" + +# Video Encoder Library +# Please add omx video encoder library to "_video_enc_list" +# Don't use space in xxx_name. +# video_enc_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_video_enc_list="H264_encoder,EVARTM0AC0000XV264E30SL40C,EVARTM0AC0000XV264E30SL40C.tar.bz2" + +# Common library packages +# Don't use space in xxx_name. +# XXX_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_omx_common_list="omx_common_lib,EVARTM0AC0000XCMCTL30SL40C,EVARTM0AC0000XCMCTL30SL40C.tar.bz2" +_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2" +_video_enc_common_list="video_enc_common,EVARTM0AC0000XVCMNE30SL40C,EVARTM0AC0000XVCMNE30SL40C.tar.bz2" +_video_dec_common_list="video_dec_common,EVARTM0AC0000XVCMND30SL40C,EVARTM0AC0000XVCMND30SL40C.tar.bz2" +_audio_common_list="audio_common,EVARTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz" + + +# DTV Library +# Please add DTV library to "_dtv_list" +# Don't use space in xxx_name. +# dtv_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz" +_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \ + dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2" + +# DVD Library +# Please add DVD library to "_dvd_list" +# Don't use space in xxx_name. +# dvd_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz" + +# CMS Library +# Please add CMS library to "_cms_list" +# Don't use space in xxx_name. +# cms_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \ + blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \ + dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz" + +# ADSP +# Please add ADSP to "_adsp_list" +# Don't use space in xxx_name. +# adsp_xx_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \ + adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz" +_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz" + +# GFX +# Please add GFX to "_gfx_list" +# Don't use space in xxx_name. +# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \ +# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \ +# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>" +_gfx_list="EVARTM0RC7795GLTG0001SL40C,EVA_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + EVARTM0RC7796GLTG0001SL40C,EVA_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \ + INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2" + +# ICCOM +# Please add ICCOM to "_iccom_list" +# Don't use space in xxx_name. +# iccom_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \ + iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2" +_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO" + +# Crypto Packgae list +# Please add crypto (zip) package name to "_crypto_pkg_list" +# Don't use space in xxx_name. +# crypto_pkg_list="<packgae name> <packgae name> <packgae name>" +_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C" + +##### static value +_MODE_ZIP=1 +_MODE_TAR=2 +_MODE_CRYPTO_ZIP=3 +_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles" +_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module" +_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv" +_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module" +_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files" +_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module" +_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module" +_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module" +_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi" +_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files" +_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files" +_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files" + +##### common function + +# $1: search file name +# $2: search directory +# return global variable +# _find_filename: find filename +# _extract_mode: _MODE_ZIP or _MODE_TAR +func_cmn_find_file() +{ +# echo "$1" +# echo "$2" + if [ -z "$1" ]; then + func_error "ERROR: func_cmn_find_file: empty filename" + fi + + if [ -z "$2" ]; then + _search_dir=${_src_full} + else + _search_dir=$2 + fi + + # search zip file +# zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l` + zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l` + + # search tar file +# tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l` + tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l` + + # duplicate file check + if [ 1 -lt `expr $zip_count + $tar_count` ]; then + echo "file1_zip = $zip_count" + echo "file1_tar = $tar_count" + func_error "ERROR: $1: too many files" + fi + + crypto_zip_count=0 + for i in ${_crypto_pkg_list} + do + if [ $1 = $i ]; then + crypto_zip_count=$zip_count + zip_count=0 + fi + done + + # set result + if [ 1 = $zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_ZIP} + elif [ 1 = $tar_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.tar.*) + _extract_mode=${_MODE_TAR} + elif [ 1 = $crypto_zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_CRYPTO_ZIP} + else + _find_filename="" + fi +} + +# $1: Mode +# $2: archive file name +func_cmn_extract_archive() +{ + case $1 in + $_MODE_ZIP) +# echo "Zip mode" + unzip -oq $2 + ;; + $_MODE_TAR) +# echo "Tar mode" + tar xf $2 + ;; + $_MODE_CRYPTO_ZIP) +# echo "Crypto Zip mode" + unzip -oq $2 + top_dir=$(basename $2) + top_dir=${top_dir%.*} + cd ${top_dir} + unzip -oq *.zip + if [ $? -gt 0 ]; then + func_error "ERROR: FAILED ZIP PASSWORD" + fi + cd ${TMPWORK} + ;; + *) + func_error "ERROR: func_cmn_extract_archive: mode error." + exit 1 + ;; + esac +} + +# $1: set target filename. +# $2: set MD5 expectation value. +func_cmn_md5_check() +{ + _md5_func_param_filename=$1 + _md5_func_param_expectation=$2 + if [ ! -e ${_md5_func_param_filename} ]; then + func_error "func_cmn_md5_check : ERROR ${_md5_func_param_filename} not found." + fi + + _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1) + + if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then + echo "Skip MD5 : `basename ${_md5_func_param_filename}`" + return + fi + + if [ -n "${_debug}" ]; then + echo "MD5 target file = ${_md5_func_param_filename}" + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + fi + + if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then + echo "MD5 OK : `basename ${_md5_func_param_filename}`" + else + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + func_error "MD5 ERROR : ${_md5_func_param_filename}" + fi +} + +##### Error function +# $1: error message +func_error() +{ + echo "$1" + # cleanup temp directory. + func_clean_tempdir + exit 1 +} + +##### cleanup temp directory +func_clean_tempdir() +{ + echo "cleanup temp directory" + rm -rf ${TMPWORK} +} + +##### Template function for Single package + +# $1: package name +# $2: search target filename +# $3: search directory (full path) +# return +# _find_filename : the found file (full path) +# _extract_top_dir_name +func_search_file_in_package() +{ + # search package file + func_cmn_find_file $1 $3 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # search file + num=`find ${top_dir} -name $2 | wc -l` + if [ ${num} -eq 1 ]; then + _find_filename=`find ${top_dir} -name $2` + else + # same filename exists. + _find_filename=`find ${top_dir} -name $2 | grep Software` + fi + + # set mode + if [ `echo ${_find_filename} | grep '\.'zip` ]; then + _extract_mode=${_MODE_ZIP} + else + _extract_mode=${_MODE_TAR} + fi + + # set return value + _extract_top_dir_name=${top_dir} +} + +# $1: package name +# $2: copy filename (md5 target) +# $3: expect MD5 value +# $4: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +func_search_and_md5check() +{ + # search package file + func_cmn_find_file $1 $4 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # MD5 + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # call func_cmn_md5_check +# func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3" + + # set return value + _extract_top_dir_name=${top_dir} +} + +##### Template function for Group package +# $1: group package name +# $2: single package name +# $3: copy filename (md5 target) +# $4: expect MD5 value +# $5: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +# +# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support. +func_search_and_md5check_grp() +{ + # search group package @SRCDIR + func_cmn_find_file $1 $5 + if [ -n "${_debug}" ]; then + echo "search group package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract group package @TMPWORK + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + cd ${_find_filename} + # check group pachage structure + # <Package name>_<version>/Package_Info.txt + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + if [ ! -e ${top_dir}/Package_Info.txt ]; then + echo "grp package = $1" + echo "single package = $2" + func_error "ERROR: Package_Info.txt not found in Group package." + fi + + # search single package @TMPWORK/TOPDIR/<Group Package name>/ + func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1" + if [ -n "${_debug}" ]; then + echo "search single package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # mv <single package> TMPWORK/. + mv ${_find_filename} ${TMPWORK}/. + + # delete group package + rm -rf ${TMPWORK}/${top_dir} + + # call search and md5check @TMPWORK + func_search_and_md5check $2 $3 $4 ${TMPWORK} +} + +##### File search and MD5check for Package list +# $1: package list +# $2: rigid flag (1: true, other: false) +# +# return +# 1: [Success] One or more files were found. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_md5check () +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'${pkg_name}` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + # rigid flag = TRUE. Not found = ERROR + if [ "X$2" = "X1" ]; then + return 0 + fi + else + find_flag=1 + fi + done + + return ${find_flag} +} + +##### File search and install (without MD5check) for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_install_wo_md5check() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + copyfile_name=$(basename ${copyfile_name}) + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # file search + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # install + install -d $2 + install -m 0644 ${_find_filename} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### File search and install for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_install() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # seach & MD5 check + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # Get directory name + # _find_filename = pkg file (full path). It is not copyfile. + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # install + install -d $2 + install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### Package function + +# For 3D graphics packages +func_gfx() +{ + echo "" + echo "Copying for Graphic Packages" + + copy_flag=0 + + for i in ${_gfx_list} + do + user_pkg_name=`echo $i | cut -d "," -f 1` + user_copyfile_name=`echo $i | cut -d "," -f 2` + user_md5_val=`eval echo '$_MD5_'${user_pkg_name}` + kern_pkg_name=`echo $i | cut -d "," -f 3` + kern_copyfile_name=`echo $i | cut -d "," -f 4` + kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}` + + if [ -n "${_debug}" ]; then + echo "" + echo "user_pkg_name = ${user_pkg_name}" + echo "user_copyfile_name= ${user_copyfile_name}" + echo "user_md5_val = ${user_md5_val}" + echo "kern_pkg_name = ${kern_pkg_name}" + echo "kern_copyfile_name= ${kern_copyfile_name}" + echo "kern_md5_val = ${kern_md5_val}" + fi + + # user module (file1) + func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}" + + if [ -z "${_find_filename}" ]; then + echo "${user_pkg_name} not found!" + continue + fi + + file1_top_dir=${_extract_top_dir_name} + echo "file1 top : ${file1_top_dir}" + + # kernel module (file2) + func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}" + + # file1 exist, but file2 not exist + if [ -z "${_find_filename}" ]; then + func_error "ERROR: func_gfx: package file for Graphic is incomplete." + fi + + file2_top_dir=${_extract_top_dir_name} + echo "file2 top : ${file2_top_dir}" + + # Finally copy is performed + copy_flag=1 + install -d ${_GFX_UM_INST_DIR} + install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/`echo ${user_copyfile_name} | cut -b 5-200` + install -d ${_GFX_KM_INST_DIR} + install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR} + echo "Installed GFX package" + echo " : ${user_pkg_name}" + echo " : ${kern_pkg_name}" + echo "" + done + + if [ ${copy_flag} -eq 0 ]; then + return + fi + + echo "" + echo "Packages for GFX module were found and copied." + echo /=======================================================/ +} + +##### For Multi Media + +# For Audio library copy +# +# Global +# _audio_list: audio library list +# Return +# 0: Not found +# 1: Success +func_audio_lib() +{ + # MD5 check: OMX Media Component Audio Common Library for Linux + func_list_search_and_md5check "${_audio_common_list}" "1" + if [ $? -eq 0 ]; then + echo "Audio Common Library not found!" + echo "" + return 0 + fi + + # MD5 check: audio library. + func_list_search_and_md5check "${_audio_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Audio library not found." + return 0 + fi + + # Add audio common library to list + _audio_list="${_audio_common_list} ${_audio_list}" + + # Install omx common lib (if not installed) + func_install_omx_common + + # Install Audio library packages + func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}" + _audio_common_install=1 + + return 1 +} + +# For Audio library +func_audio() +{ + echo "" + echo "Copying for Audio Common Packages" + + _audio_common_install=0 + + # Audio requires OMX common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # Audio Library + func_audio_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Audio Packages" + echo "" + return + fi + + echo "" + echo "Packages for Audio module were found and copied." + echo /=======================================================/ +} + +# For Audio M/W +# Global +# _audio_mw_list: audio M/W library list +# Return +# 0: Not found +# 1: Success +func_audio_mw() +{ + echo "" + echo "Copying for Audio M/W Packages" + + # MD5 check + func_list_search_and_md5check "${_audio_mw_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Packages for Audio M/W module were not found." + return 0 + fi + + # Install Audio M/W library packages + func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}" + + echo "" + echo "Packages for Audio M/W module were found and copied." + echo /=======================================================/ + + return 1 +} + +# install OMX common library +func_install_omx_common() +{ + if [ ${_omx_common_install} -eq 0 ]; then + echo "" + echo "Install for OMX Common Packages" + func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}" + _omx_common_install=1 + fi +} + +# install uvcs driver +func_install_uvcs() +{ + if [ ${_uvcs_install} -eq 0 ]; then + echo "" + echo "Installed UVCS driver" + func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}" + _uvcs_install=1 + fi +} + +# search & MD5 check for OMX Video Decoder library +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder_lib() +{ + echo "" + echo "Copying for Video Decoder Library Packages" + + # MD5 check: Decoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_dec_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Decoder Common Library not found!" + return 0 + fi + + # MD5 check: Video Decoder Library + func_list_search_and_md5check "${_video_dec_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install OMX common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add video decoder common lib to list + _video_dec_list="${_video_dec_common_list} ${_video_dec_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}" + _video_decoder_common_install=1 + + return 1 +} + +# search & MD5 check for OMX Video Encoder library +# Global +# _video_enc_list: video encoder list +# Return +# 0: Not found +# 1: Success +func_video_encoder_lib() +{ + echo "" + echo "Copying for Video Encoder Library Packages" + + + # MD5 check Encoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_enc_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Encoder Common Library not found!" + return 0 + fi + _video_encoder_common_install=0 + + # Video Encoder Library + # MD5 check + func_list_search_and_md5check "${_video_enc_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add Video encoder common library to list + _video_enc_list="${_video_enc_common_list} ${_video_enc_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}" + _video_encoder_common_install=1 + + return 1 +} + +# For Video decoder +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder() +{ + echo "" + echo "Copying for Video Decoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Decoder + # Decoder common Lib + func_video_decoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Decoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video decoder module were found and copied." + echo /=======================================================/ +} + +# For Video encoder +func_video_encoder() +{ + echo "" + echo "Copying for Video Encoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Encoder + # Encoder common Lib + func_video_encoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Encoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video encoder module were found and copied." + echo /=======================================================/ +} + +# For DTV kernel module +func_dtv_kern() +{ + echo "" + echo "Copying for DTV kernel module" + + _dtv_kern_install=0 + + func_list_search_and_md5check "${_dtv_km_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV kernel library not found!" + return + fi + + pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2` + copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3` + + # extract --> archive --> copied + echo "Installed DTV kernel modules" + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + func_cmn_extract_archive "${_extract_mode}" "${_find_filename}" + + dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv" + for i in ${dtv_driver_list} + do + tar cfz $i.tar.gz $i + install -d ${_DTV_KM_INST_DIR} + install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR} + echo " : $i.tar.gz" + done + + _dtv_kern_install=1 + + echo "" + echo "DTV kernel module were found and copied." + echo /=======================================================/ +} + +# For DTV lib +func_dtv_lib() +{ + echo "" + echo "Copying for DTV Library Packages" + + # DTV kernel modules + if [ ${_dtv_kern_install} -eq 0 ]; then + echo "DTV kernel module not found!" + echo "Skip DTV Package" + echo "" + return + fi + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dtv_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV library not found" + return + fi + + # install + func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}" + + echo "" + echo "DTV Package were found and copied." + echo /=======================================================/ +} + +# For DVD lib +func_dvd_lib() +{ + echo "" + echo "Copying for DVD Library Packages" + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dvd_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DVD library not found" + return + fi + + # install searched library + func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}" + + echo "" + echo "DVD Package were found and copied." + echo /=======================================================/ +} + +# For DTV/DVD main routine +func_dtv_dvd() +{ + echo "" + echo "Copying for DTV/DVD Packages" + + # DTV/DVD requires OMX Video Decoder + if [ ${_video_decoder_common_install} -eq 0 ]; then + echo "Video Decoder Library not found!" + echo "Skip DTV/DVD Package" + echo "" + return + fi + + # DTV requires Audio Decoder + if [ ${_audio_common_install} -eq 0 ]; then + echo "Audio Common Library not found!" + echo "Skip DTV Package" + echo "" + else + # DTV package + func_dtv_kern + func_dtv_lib + fi + + # DVD package + func_dvd_lib +} + +# For CMS main routine +func_cms() +{ + echo "" + echo "Copying for CMS Packages" + + copy_flag=0 + + # MD5 check + func_list_search_and_md5check "${_cms_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip CMS package" + echo "" + return + fi + + # Install library + func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}" + + echo "" + echo "Packages for CMS were found and copied." + echo /=======================================================/ +} + +# For ADSP main routine +func_adsp() +{ + echo "" + echo "Copying for ADSP Packages" + + # MD5 check (rigid flag = TRUE) + # In ADSP, all files are necesarry + func_list_search_and_md5check "${_adsp_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + func_list_search_and_md5check "${_adsp_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}" + + echo "" + echo "Packages for ADSP were found and copied." + echo /=======================================================/ +} + +# For ICCOM main routine +func_iccom() +{ + echo "" + echo "Copying for ICCOM Packages" + + # MD5 check (rigid flag = TRUE) + # In ICCOM, all files are necesarry + func_list_search_and_md5check "${_iccom_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + func_list_search_and_md5check "${_iccom_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}" + + echo "" + echo "Packages for ICCOM were found and copied." + echo /=======================================================/ +} + +################################ +# Copy Script Main routine +################################ +echo "Copyscript for R-Car Gen3" +echo +#### 1) Checking current directory +if [ ! -d meta-rcar-gen3 ]; then + echo "ERROR: Please extract meta-renesas and cd to it, before execute $0" + exit 1 +fi + +#### 2) Checking Arguments +if [ "X$1" = "X" ]; then + usage + exit 1 +fi + +while [ $# -gt 0 ] ; do + case "$1" in + -f|--force) + _no_md5check=1 + ;; + -d|--debug) + _debug=1 + ;; + *) + _src_dirname=$(basename $1) + _src_path=$(cd $(dirname $1) && pwd) + _src_full=${_src_path}/${_src_dirname} + ;; + esac + shift +done + +#### 3) Checking ClickThrough present +if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz ]; then + echo "R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz not found!" + usage + exit 1 +fi +if [ ! -f ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz ]; then + echo "R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz not found!" + usage + exit 1 +fi + +tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.tar.gz --strip-components 2 +tar -C ${_src_full} -zxf ${_src_full}/R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.tar.gz --strip-components 2 + +# source directory check +if [ ! -d ${_src_path}/${_src_dirname} ]; then + echo "${_src_path}/${_src_dirname} not found." + usage + exit 1 +fi + +if [ -n "${_debug}" ]; then + echo "src = ${_src_dirname}" + echo "src_path = ${_src_path}" + echo "src_full = ${_src_full}" + echo "no_md5check = ${_no_md5check}" + echo "" +fi + +##### 3) create temp directory +TMPWORK=${PWD}/CP_SCRIPT_TEMP +if [ -d ${TMPWORK} ]; then + echo "ERROR: Work directory already exist." + exit 1 +fi +install -d -m 700 ${TMPWORK} +cd ${TMPWORK} + +##### 4) copy +# initialize flag +_omx_common_install=0 +_uvcs_install=0 +_audio_common_install=0 +_video_decoder_common_install=0 +_video_encoder_common_install=0 +_dtv_kern_install=0 + +func_gfx +func_audio +func_audio_mw +func_video_decoder +func_video_encoder +func_dtv_dvd +func_cms +func_adsp +func_iccom + +##### 5) cleanup temp directory +func_clean_tempdir + +##### End +echo "Complete copying !" diff --git a/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh new file mode 100755 index 0000000..3a100e1 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/copyscript/copy_proprietary_softwares.sh @@ -0,0 +1,1330 @@ +#!/bin/sh + +# Copyright (C) Renesas Electronics Corporation 2015 All rights reserved. + +usage() +{ +cat << EOF + usage: `basename $0` [-f] [-d] source-directory + -f: fource copy. ignore md5check + -d: debug mode + + Ex) + `basename $0` -f my_package_dir +EOF +} + +##### MD5 list ##### +. `dirname $0`/md5list.txt + +##### Library List ##### +# Audio Library +# Please add omx audio library to "_audio_list" +# Don't use space in xxx_name. +# audio_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_audio_list="AAC-LC_decoder_lib,RTM0AC0000XAAACD30SL40C,RTM0AC0000XAAACD30SL40C.tar.gz \ + aacPlusV2_decoder_lib,RTM0AC0000XAAAPD30SL40C,RTM0AC0000XAAAPD30SL40C.tar.gz \ + MP3_decoder_lib,RTM0AC0000XAMP3D30SL40C,RTM0AC0000XAMP3D30SL40C.tar.gz \ + WMA_decoder_lib,RTM0AC0000XAWMAD30SL40C,RTM0AC0000XAWMAD30SL40C.tar.gz \ + AAC-LC_encoder_lib,RTM0AC0000XAAACE30SL40C,RTM0AC0000XAAACE30SL40C.tar.gz \ + ALAC_decoder_lib,RTM0AC0000XAALAD30SL40C,RTM0AC0000XAALAD30SL40C.tar.gz \ + FLAC_decoder_lib,RTM0AC0000XAFLAD30SL40C,RTM0AC0000XAFLAD30SL40C.tar.gz \ + Dolby_decoder_lib,RTM0AC0000XADD5D30SL40C,RTM0AC0000XADD5D30SL40C.tar.gz" + +# Audio M/W Library +# Please add omx audio library to "_audio_mw_list" +# Don't use space in xxx_name. +# audio_mw_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_audio_mw_list="AAC-LC_decoder_M/W,RTM0AC0000ADAACMZ1SL40C,RTM0AC0000ADAACMZ1SL40C.tar.gz \ + aacPlusV2_decoder_M/W,RTM0AC0000ADAAPMZ1SL40C,RTM0AC0000ADAAPMZ1SL40C.tar.gz \ + MP3_decoder_M/W,RTM0AC0000ADMP3MZ1SL40C,RTM0AC0000ADMP3MZ1SL40C.tar.gz \ + WMA_decoder_M/W,RTM0AC0000ADWMAMZ1SL40C,RTM0AC0000ADWMAMZ1SL40C.tar.gz \ + AAC-LC_encoder_M/W,RTM0AC0000AEAACMZ1SL40C,RTM0AC0000AEAACMZ1SL40C.tar.gz \ + DDD_decoder_M/W,RTM0AC0000ADDD5MZ1SL40C,RTM0AC0000ADDD5MZ1SL40C.tar.gz" + +# Video Decoder Library +# Please add omx video decoder library to "_video_dec_list" +# Don't use space in xxx_name. +# video_dec_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_video_dec_list="H263_decoder,RTM0AC0000XV263D30SL40C,RTM0AC0000XV263D30SL40C.tar.bz2 \ + H264_decoder,RTM0AC0000XV264D30SL40C,RTM0AC0000XV264D30SL40C.tar.bz2 \ + H265_decoder,RTM0AC0000XV265D30SL40C,RTM0AC0000XV265D30SL40C.tar.bz2 \ + MPEG2_decoder,RTM0AC0000XVM2VD30SL40C,RTM0AC0000XVM2VD30SL40C.tar.bz2 \ + MPEG4_decoder,RTM0AC0000XVM4VD30SL40C,RTM0AC0000XVM4VD30SL40C.tar.bz2 \ + VC1_decoder,RTM0AC0000XVVC1D30SL40C,RTM0AC0000XVVC1D30SL40C.tar.bz2 \ + DivX_decoder,RTM0AC0000XVDVXD30SL40C,RTM0AC0000XVDVXD30SL40C.tar.bz2 \ + RealVideo_decoder,RTM0AC0000XVRLVD30SL40C,RTM0AC0000XVRLVD30SL40C.tar.bz2" + +# Video Encoder Library +# Please add omx video encoder library to "_video_enc_list" +# Don't use space in xxx_name. +# video_enc_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_video_enc_list="H264_encoder,RTM0AC0000XV264E30SL40C,RTM0AC0000XV264E30SL40C.tar.bz2" + +# Common library packages +# Don't use space in xxx_name. +# XXX_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_omx_common_list="omx_common_lib,RTM0AC0000XCMCTL30SL40C,RTM0AC0000XCMCTL30SL40C.tar.bz2" +_uvcs_list="uvcs_lib,RCG3VUDRL4001ZDO,RCG3VUDRL4001ZDO.tar.bz2" +_video_enc_common_list="video_enc_common,RTM0AC0000XVCMNE30SL40C,RTM0AC0000XVCMNE30SL40C.tar.bz2" +_video_dec_common_list="video_dec_common,RTM0AC0000XVCMND30SL40C,RTM0AC0000XVCMND30SL40C.tar.bz2" +_audio_common_list="audio_common,RTM0AC0000XACMND30SL40C,RTM0AC0000XACMND30SL40C.tar.gz" + + +# DTV Library +# Please add DTV library to "_dtv_list" +# Don't use space in xxx_name. +# dtv_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_dtv_km_list="dtv_km,RCG3T001L4001ZDO,Software.tar.gz" +_dtv_um_list="dtv_lib,RTM0RC0000TE020000SL40C,Software.tar.gz,RTM0RC0000TE020000SL40C1 \ + dtv_userfunc,RTM0RC0000TE020000SL40C,../Reference/Reference.tar.gz,RTM0RC0000TE020000SL40C2" + +# DVD Library +# Please add DVD library to "_dvd_list" +# Don't use space in xxx_name. +# dvd_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_dvd_list="dvd_lib,RTM0RC0000XDVDC301SL40C,Software.tar.gz" + +# CMS Library +# Please add CMS library to "_cms_list" +# Don't use space in xxx_name. +# cms_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_cms_list="bcm,RTM0AC0000JRCMBCV0SL40C,RTM0AC0000JRCMBCV0SL40C.tar.gz \ + blc,RTM0AC0000JRCMBLC0SL40C,RTM0AC0000JRCMBLC0SL40C.tar.gz \ + dgc,RTM0AC0000JRCMDGV0SL40C,RTM0AC0000JRCMDGV0SL40C.tar.gz" + +# ADSP +# Please add ADSP to "_adsp_list" +# Don't use space in xxx_name. +# adsp_xx_list="<software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name> \ +# <software_name>,<package_name>,<copy_file_name>" +_adsp_um_list="adsp_fw,RCG3AHFWN0101ZDP,RCG3AHFWN0101ZDP.tar.gz \ + adsp_if,RCG3AHIFL4001ZDP,RCG3AHIFL4001ZDP.tar.gz" +_adsp_km_list="adsp_driver,RCG3AHPDL4001ZDO,RCG3AHPDL4001ZDO.tar.gz" + +# GFX +# Please add GFX to "_gfx_list" +# Don't use space in xxx_name. +# gfx_list="<package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \ +# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)> \ +# <package_name(user)>,<copy_file_name(user)>,<package_name(kernel)>,<copy_file_name(kernel)>" +_gfx_list="RTM0RC7795GLTG0001SL40C,r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + RTM0RC7796GLTG0001SL40C,r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2 \ + INFRTM0RC7795GLTG0001SL40C,INF_r8a7795_linux_gsx_binaries_gles3.tar.bz2,RCH3G001L4001ZDO,GSX_KM_H3.tar.bz2 \ + INFRTM0RC7796GLTG0001SL40C,INF_r8a7796_linux_gsx_binaries_gles3.tar.bz2,RCM3G001L4001ZDO,GSX_KM_M3.tar.bz2" + +# ICCOM +# Please add ICCOM to "_iccom_list" +# Don't use space in xxx_name. +# iccom_xx_list="<software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name> \ +# <software_name>,<package_name>,<copy_file_name>,<MD5_name>" +_iccom_km_list="iccom_mfis,RCG3ZLIDL4001ZNO,iccom-mfis.tar.bz2,RCG3ZLIDL4001ZNO1 \ + iccom_sample,RCG3ZLIDL4001ZNO,iccom-hwspinlock-sample.tar.bz2,RCG3ZLIDL4001ZNO2" +_iccom_um_list="iccom_lib,RCG3ZLILL4001ZNO,libiccom.tar.bz2,RCG3ZLILL4001ZNO" + +# Crypto Packgae list +# Please add crypto (zip) package name to "_crypto_pkg_list" +# Don't use space in xxx_name. +# crypto_pkg_list="<packgae name> <packgae name> <packgae name>" +_crypto_pkg_list="RTM0AC0000ADDD5MZ1SL40C" + +##### static value +_MODE_ZIP=1 +_MODE_TAR=2 +_MODE_CRYPTO_ZIP=3 +_GFX_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-gles/kernel-module-gles" +_GFX_UM_INST_DIR="../meta-rcar-gen3/recipes-graphics/gles-module/gles-user-module" +_UVCS_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-uvcs/kernel-module-uvcs-drv" +_OMX_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/omx-module/omx-user-module" +_DTV_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-dtv/files" +_DTV_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dtv-module/dtv-user-module" +_DVD_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/dvd-module/dvd-user-module" +_CMS_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/cms-module/cms-user-module" +_ADSP_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-adsp/xtensa-hifi" +_ADSP_UM_INST_DIR="../meta-rcar-gen3/recipes-multimedia/adsp-module/files" +_ICCOM_KM_INST_DIR="../meta-rcar-gen3/recipes-kernel/kernel-module-iccom/files" +_ICCOM_UM_INST_DIR="../meta-rcar-gen3/recipes-connectivity/iccom-module/files" + +##### common function + +# $1: search file name +# $2: search directory +# return global variable +# _find_filename: find filename +# _extract_mode: _MODE_ZIP or _MODE_TAR +func_cmn_find_file() +{ +# echo "$1" +# echo "$2" + if [ -z "$1" ]; then + func_error "ERROR: func_cmn_find_file: empty filename" + fi + + if [ -z "$2" ]; then + _search_dir=${_src_full} + else + _search_dir=$2 + fi + + # search zip file +# zip_count=`find ${_search_dir} -maxdepth 1 -name "$1*.zip" | wc -l` + zip_count=`ls ${_search_dir}/$1*.zip 2>/dev/null | wc -l` + + # search tar file +# tar_count=`find ${_search_dir} -maxdepth 1 -name "$1*.tar.*" | wc -l` + tar_count=`ls ${_search_dir}/$1*.tar.* 2>/dev/null | wc -l` + + # duplicate file check + if [ 1 -lt `expr $zip_count + $tar_count` ]; then + echo "file1_zip = $zip_count" + echo "file1_tar = $tar_count" + func_error "ERROR: $1: too many files" + fi + + crypto_zip_count=0 + for i in ${_crypto_pkg_list} + do + if [ $1 = $i ]; then + crypto_zip_count=$zip_count + zip_count=0 + fi + done + + # set result + if [ 1 = $zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_ZIP} + elif [ 1 = $tar_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.tar.*) + _extract_mode=${_MODE_TAR} + elif [ 1 = $crypto_zip_count ]; then + _find_filename=$(ls ${_search_dir}/$1*.zip) + _extract_mode=${_MODE_CRYPTO_ZIP} + else + _find_filename="" + fi +} + +# $1: Mode +# $2: archive file name +func_cmn_extract_archive() +{ + case $1 in + $_MODE_ZIP) +# echo "Zip mode" + unzip -oq $2 + ;; + $_MODE_TAR) +# echo "Tar mode" + tar xf $2 + ;; + $_MODE_CRYPTO_ZIP) +# echo "Crypto Zip mode" + unzip -oq $2 + top_dir=$(basename $2) + top_dir=${top_dir%.*} + cd ${top_dir} + unzip -oq *.zip + if [ $? -gt 0 ]; then + func_error "ERROR: FAILED ZIP PASSWORD" + fi + cd ${TMPWORK} + ;; + *) + func_error "ERROR: func_cmn_extract_archive: mode error." + exit 1 + ;; + esac +} + +# $1: set target filename. +# $2: set MD5 expectation value. +func_cmn_md5_check() +{ + _md5_func_param_filename=$1 + _md5_func_param_expectation=$2 + if [ ! -e ${_md5_func_param_filename} ]; then + func_error "func_cmn_md5_check : ERROR ${_md5_func_param_filename} not found." + fi + + _calc_md5=$(md5sum ${_md5_func_param_filename} | cut -d " " -f1) + + if [ -n "${_no_md5check}" ] || [ -z ${_md5_func_param_expectation} ]; then + echo "Skip MD5 : `basename ${_md5_func_param_filename}`" + return + fi + + if [ -n "${_debug}" ]; then + echo "MD5 target file = ${_md5_func_param_filename}" + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + fi + + if [ ${_calc_md5} = ${_md5_func_param_expectation} ]; then + echo "MD5 OK : `basename ${_md5_func_param_filename}`" + else + echo "calc_md5 = ${_calc_md5}" + echo "expect_value = ${_md5_func_param_expectation}" + func_error "MD5 ERROR : ${_md5_func_param_filename}" + fi +} + +##### Error function +# $1: error message +func_error() +{ + echo "$1" + # cleanup temp directory. + func_clean_tempdir + exit 1 +} + +##### cleanup temp directory +func_clean_tempdir() +{ + echo "cleanup temp directory" + rm -rf ${TMPWORK} +} + +##### Template function for Single package + +# $1: package name +# $2: search target filename +# $3: search directory (full path) +# return +# _find_filename : the found file (full path) +# _extract_top_dir_name +func_search_file_in_package() +{ + # search package file + func_cmn_find_file $1 $3 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # search file + num=`find ${top_dir} -name $2 | wc -l` + if [ ${num} -eq 1 ]; then + _find_filename=`find ${top_dir} -name $2` + else + # same filename exists. + _find_filename=`find ${top_dir} -name $2 | grep Software` + fi + + # set mode + if [ `echo ${_find_filename} | grep '\.'zip` ]; then + _extract_mode=${_MODE_ZIP} + else + _extract_mode=${_MODE_TAR} + fi + + # set return value + _extract_top_dir_name=${top_dir} +} + +# $1: package name +# $2: copy filename (md5 target) +# $3: expect MD5 value +# $4: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +func_search_and_md5check() +{ + # search package file + func_cmn_find_file $1 $4 + if [ -n "${_debug}" ]; then + echo "" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + # MD5 + # Get directory name + # {PATH}/Package_Version.tar.gz or XXXX.zip --> Package_Version + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # call func_cmn_md5_check + func_cmn_md5_check "${top_dir}/$1/Software/$2" "$3" + + # set return value + _extract_top_dir_name=${top_dir} +} + +##### Template function for Group package +# $1: group package name +# $2: single package name +# $3: copy filename (md5 target) +# $4: expect MD5 value +# $5: search directory (full path) +# return +# _find_file_name +# _extract_top_dir_name +# +# NOTE) This function support level1 packaging. "grp pkg in grp pkg" dose note support. +func_search_and_md5check_grp() +{ + # search group package @SRCDIR + func_cmn_find_file $1 $5 + if [ -n "${_debug}" ]; then + echo "search group package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # extract group package @TMPWORK + func_cmn_extract_archive ${_extract_mode} "${_find_filename}" + + cd ${_find_filename} + # check group pachage structure + # <Package name>_<version>/Package_Info.txt + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + if [ ! -e ${top_dir}/Package_Info.txt ]; then + echo "grp package = $1" + echo "single package = $2" + func_error "ERROR: Package_Info.txt not found in Group package." + fi + + # search single package @TMPWORK/TOPDIR/<Group Package name>/ + func_cmn_find_file $2 "${TMPWORK}/${top_dir}/$1" + if [ -n "${_debug}" ]; then + echo "search single package" + echo "FileName = ${_find_filename}" + echo "Mode = ${_extract_mode}" + echo "" + fi + + if [ -z "${_find_filename}" ]; then + return + fi + + # mv <single package> TMPWORK/. + mv ${_find_filename} ${TMPWORK}/. + + # delete group package + rm -rf ${TMPWORK}/${top_dir} + + # call search and md5check @TMPWORK + func_search_and_md5check $2 $3 $4 ${TMPWORK} +} + +##### File search and MD5check for Package list +# $1: package list +# $2: rigid flag (1: true, other: false) +# +# return +# 1: [Success] One or more files were found. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_md5check () +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'${pkg_name}` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + # rigid flag = TRUE. Not found = ERROR + if [ "X$2" = "X1" ]; then + return 0 + fi + else + find_flag=1 + fi + done + + return ${find_flag} +} + +##### File search and install (without MD5check) for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_install_wo_md5check() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + copyfile_name=$(basename ${copyfile_name}) + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # file search + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # install + install -d $2 + install -m 0644 ${_find_filename} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### File search and install for Package list +# +# $1: package list +# $2: install directory +# +# return +# 1: [Success] One or more files were installed. +# 0: [Fail] File not found +# +# package list format +# list ="<software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name> \ +# <software_name>,<package_name>,<copy_file_name>,<md5_variable_name>" +# +# Note) Don't use space in xxx_name. +# Note) md5_variable_name is defined in md5list.txt. +# Prefix "_MD5_" is added automaticary. ex) FOO --> _MD5_FOO +# It is omissible. The default is "_MD5_<package_name>". +func_list_search_and_install() +{ + find_flag=0 + + for i in $1 + do + sw_name=`echo $i | cut -d "," -f 1` + pkg_name=`echo $i | cut -d "," -f 2` + copyfile_name=`echo $i | cut -d "," -f 3` + md5_val=`echo $i | cut -d "," -f 4` + + # <MD5_name> is empty. Default MD5 name is "_MD5_<pkg_name>" + if [ -z "${md5_val}" ]; then + md5_val=`eval echo '$_MD5_'$pkg_name` + else + md5_val=`eval echo '$_MD5_'${md5_val}` + fi + + if [ -n "${_debug}" ]; then + echo "" + echo "sw_name = $sw_name" + echo "pkg_name = $pkg_name" + echo "copyfile_name = $copyfile_name" + echo "md5_val = $md5_val" + fi + + # seach & MD5 check + func_search_and_md5check "${pkg_name}" "${copyfile_name}" "${md5_val}" "${_src_full}" + if [ -z "${_find_filename}" ]; then + echo "${sw_name} not found!" + else + find_flag=1 + + # Get directory name + # _find_filename = pkg file (full path). It is not copyfile. + top_dir=$(basename ${_find_filename}) + top_dir=${top_dir%.*} + + # install + install -d $2 + install -m 0644 ${top_dir}/${pkg_name}/Software/${copyfile_name} $2 + echo "Installed $sw_name" + echo " : ${pkg_name}" + fi + done + + return ${find_flag} +} + +##### Package function + +# For 3D graphics packages +func_gfx() +{ + echo "" + echo "Copying for Graphic Packages" + + copy_flag=0 + + for i in ${_gfx_list} + do + user_pkg_name=`echo $i | cut -d "," -f 1` + user_copyfile_name=`echo $i | cut -d "," -f 2` + user_md5_val=`eval echo '$_MD5_'${user_pkg_name}` + kern_pkg_name=`echo $i | cut -d "," -f 3` + kern_copyfile_name=`echo $i | cut -d "," -f 4` + kern_md5_val=`eval echo '$_MD5_'${kern_pkg_name}` + + if [ -n "${_debug}" ]; then + echo "" + echo "user_pkg_name = ${user_pkg_name}" + echo "user_copyfile_name= ${user_copyfile_name}" + echo "user_md5_val = ${user_md5_val}" + echo "kern_pkg_name = ${kern_pkg_name}" + echo "kern_copyfile_name= ${kern_copyfile_name}" + echo "kern_md5_val = ${kern_md5_val}" + fi + + # user module (file1) + func_search_and_md5check "${user_pkg_name}" "${user_copyfile_name}" "${user_md5_val}" "${_src_full}" + + if [ -z "${_find_filename}" ]; then + echo "${user_pkg_name} not found!" + continue + fi + + file1_top_dir=${_extract_top_dir_name} + echo "file1 top : ${file1_top_dir}" + + # kernel module (file2) + func_search_and_md5check "${kern_pkg_name}" "${kern_copyfile_name}" "${kern_md5_val}" "${_src_full}" + + # file1 exist, but file2 not exist + if [ -z "${_find_filename}" ]; then + func_error "ERROR: func_gfx: package file for Graphic is incomplete." + fi + + file2_top_dir=${_extract_top_dir_name} + echo "file2 top : ${file2_top_dir}" + + # Finally copy is performed + copy_flag=1 + install -d ${_GFX_UM_INST_DIR} + install -m 0644 ${file1_top_dir}/${user_pkg_name}/Software/${user_copyfile_name} ${_GFX_UM_INST_DIR}/${user_copyfile_name##INF_} + install -d ${_GFX_KM_INST_DIR} + install -m 0644 ${file2_top_dir}/${kern_pkg_name}/Software/${kern_copyfile_name} ${_GFX_KM_INST_DIR} + echo "Installed GFX package" + echo " : ${user_pkg_name}" + echo " : ${kern_pkg_name}" + echo "" + done + + if [ ${copy_flag} -eq 0 ]; then + return + fi + + echo "" + echo "Packages for GFX module were found and copied." + echo /=======================================================/ +} + +##### For Multi Media + +# For Audio library copy +# +# Global +# _audio_list: audio library list +# Return +# 0: Not found +# 1: Success +func_audio_lib() +{ + # MD5 check: OMX Media Component Audio Common Library for Linux + func_list_search_and_md5check "${_audio_common_list}" "1" + if [ $? -eq 0 ]; then + echo "Audio Common Library not found!" + echo "" + return 0 + fi + + # MD5 check: audio library. + func_list_search_and_md5check "${_audio_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Audio library not found." + return 0 + fi + + # Add audio common library to list + _audio_list="${_audio_common_list} ${_audio_list}" + + # Install omx common lib (if not installed) + func_install_omx_common + + # Install Audio library packages + func_list_search_and_install_wo_md5check "${_audio_list}" "${_OMX_UM_INST_DIR}" + _audio_common_install=1 + + return 1 +} + +# For Audio library +func_audio() +{ + echo "" + echo "Copying for Audio Common Packages" + + _audio_common_install=0 + + # Audio requires OMX common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # Audio Library + func_audio_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Audio Packages" + echo "" + return + fi + + echo "" + echo "Packages for Audio module were found and copied." + echo /=======================================================/ +} + +# For Audio M/W +# Global +# _audio_mw_list: audio M/W library list +# Return +# 0: Not found +# 1: Success +func_audio_mw() +{ + echo "" + echo "Copying for Audio M/W Packages" + + # MD5 check + func_list_search_and_md5check "${_audio_mw_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "Packages for Audio M/W module were not found." + return 0 + fi + + # Install Audio M/W library packages + func_list_search_and_install_wo_md5check "${_audio_mw_list}" "${_OMX_UM_INST_DIR}" + + echo "" + echo "Packages for Audio M/W module were found and copied." + echo /=======================================================/ + + return 1 +} + +# install OMX common library +func_install_omx_common() +{ + if [ ${_omx_common_install} -eq 0 ]; then + echo "" + echo "Install for OMX Common Packages" + func_list_search_and_install_wo_md5check "${_omx_common_list}" "${_OMX_UM_INST_DIR}" + _omx_common_install=1 + fi +} + +# install uvcs driver +func_install_uvcs() +{ + if [ ${_uvcs_install} -eq 0 ]; then + echo "" + echo "Installed UVCS driver" + func_list_search_and_install_wo_md5check "${_uvcs_list}" "${_UVCS_INST_DIR}" + _uvcs_install=1 + fi +} + +# search & MD5 check for OMX Video Decoder library +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder_lib() +{ + echo "" + echo "Copying for Video Decoder Library Packages" + + # MD5 check: Decoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_dec_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Decoder Common Library not found!" + return 0 + fi + + # MD5 check: Video Decoder Library + func_list_search_and_md5check "${_video_dec_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install OMX common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add video decoder common lib to list + _video_dec_list="${_video_dec_common_list} ${_video_dec_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_dec_list}" "${_OMX_UM_INST_DIR}" + _video_decoder_common_install=1 + + return 1 +} + +# search & MD5 check for OMX Video Encoder library +# Global +# _video_enc_list: video encoder list +# Return +# 0: Not found +# 1: Success +func_video_encoder_lib() +{ + echo "" + echo "Copying for Video Encoder Library Packages" + + + # MD5 check Encoder Common Library (rigid flag=TRUE) + func_list_search_and_md5check "${_video_enc_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Video Encoder Common Library not found!" + return 0 + fi + _video_encoder_common_install=0 + + # Video Encoder Library + # MD5 check + func_list_search_and_md5check "${_video_enc_list}" + if [ $? -eq 0 ]; then + # library not found. + return 0 + fi + + # install common lib (if not installed) + func_install_omx_common + + # install UVCS driver (if not installed) + func_install_uvcs + + # Add Video encoder common library to list + _video_enc_list="${_video_enc_common_list} ${_video_enc_list}" + + # install searched library + func_list_search_and_install_wo_md5check "${_video_enc_list}" "${_OMX_UM_INST_DIR}" + _video_encoder_common_install=1 + + return 1 +} + +# For Video decoder +# Global +# _video_dec_list: video decoder list +# Return +# 0: Not found +# 1: Success +func_video_decoder() +{ + echo "" + echo "Copying for Video Decoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Decoder + # Decoder common Lib + func_video_decoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Decoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video decoder module were found and copied." + echo /=======================================================/ +} + +# For Video encoder +func_video_encoder() +{ + echo "" + echo "Copying for Video Encoder Packages" + + # OMX Common library + if [ ${_omx_common_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_omx_common_list}" "1" + if [ $? -eq 0 ]; then + echo "OMX Common Library not found!" + echo "" + return + fi + else + echo "OMX Common Library already installed" + fi + + # UVCS driver + if [ ${_uvcs_install} -eq 0 ]; then + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_uvcs_list}" "1" + if [ $? -eq 0 ]; then + echo "UVCS driver not found!" + echo "" + return + fi + else + echo "UVCS driver already installed" + fi + + # OMX Encoder + # Encoder common Lib + func_video_encoder_lib + if [ $? -eq 0 ]; then + echo "" + echo "Skip Video Encoder Packages" + echo "" + return + fi + + echo "" + echo "Packages for video encoder module were found and copied." + echo /=======================================================/ +} + +# For DTV kernel module +func_dtv_kern() +{ + echo "" + echo "Copying for DTV kernel module" + + _dtv_kern_install=0 + + func_list_search_and_md5check "${_dtv_km_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV kernel library not found!" + return + fi + + pkg_name=`echo ${_dtv_km_list} | cut -d "," -f 2` + copyfile_name=`echo ${_dtv_km_list} | cut -d "," -f 3` + + # extract --> archive --> copied + echo "Installed DTV kernel modules" + func_search_file_in_package "${pkg_name}" "${copyfile_name}" "${_src_full}" + func_cmn_extract_archive "${_extract_mode}" "${_find_filename}" + + dtv_driver_list="ssp_drv scu_src_drv tsif_drv tddmac_drv" + for i in ${dtv_driver_list} + do + tar cfz $i.tar.gz $i + install -d ${_DTV_KM_INST_DIR} + install -m 644 $i.tar.gz ${_DTV_KM_INST_DIR} + echo " : $i.tar.gz" + done + + _dtv_kern_install=1 + + echo "" + echo "DTV kernel module were found and copied." + echo /=======================================================/ +} + +# For DTV lib +func_dtv_lib() +{ + echo "" + echo "Copying for DTV Library Packages" + + # DTV kernel modules + if [ ${_dtv_kern_install} -eq 0 ]; then + echo "DTV kernel module not found!" + echo "Skip DTV Package" + echo "" + return + fi + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dtv_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DTV library not found" + return + fi + + # install + func_list_search_and_install_wo_md5check "${_dtv_um_list}" "${_DTV_UM_INST_DIR}" + + echo "" + echo "DTV Package were found and copied." + echo /=======================================================/ +} + +# For DVD lib +func_dvd_lib() +{ + echo "" + echo "Copying for DVD Library Packages" + + # MD5 check (rigid flag=TRUE) + func_list_search_and_md5check "${_dvd_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "" + echo "DVD library not found" + return + fi + + # install searched library + func_list_search_and_install_wo_md5check "${_dvd_list}" "${_DVD_UM_INST_DIR}" + + echo "" + echo "DVD Package were found and copied." + echo /=======================================================/ +} + +# For DTV/DVD main routine +func_dtv_dvd() +{ + echo "" + echo "Copying for DTV/DVD Packages" + + # DTV/DVD requires OMX Video Decoder + if [ ${_video_decoder_common_install} -eq 0 ]; then + echo "Video Decoder Library not found!" + echo "Skip DTV/DVD Package" + echo "" + return + fi + + # DTV requires Audio Decoder + if [ ${_audio_common_install} -eq 0 ]; then + echo "Audio Common Library not found!" + echo "Skip DTV Package" + echo "" + else + # DTV package + func_dtv_kern + func_dtv_lib + fi + + # DVD package + func_dvd_lib +} + +# For CMS main routine +func_cms() +{ + echo "" + echo "Copying for CMS Packages" + + copy_flag=0 + + # MD5 check + func_list_search_and_md5check "${_cms_list}" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip CMS package" + echo "" + return + fi + + # Install library + func_list_search_and_install_wo_md5check "${_cms_list}" "${_CMS_UM_INST_DIR}" + + echo "" + echo "Packages for CMS were found and copied." + echo /=======================================================/ +} + +# For ADSP main routine +func_adsp() +{ + echo "" + echo "Copying for ADSP Packages" + + # MD5 check (rigid flag = TRUE) + # In ADSP, all files are necesarry + func_list_search_and_md5check "${_adsp_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + func_list_search_and_md5check "${_adsp_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ADSP Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_adsp_km_list}" "${_ADSP_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_adsp_um_list}" "${_ADSP_UM_INST_DIR}" + + echo "" + echo "Packages for ADSP were found and copied." + echo /=======================================================/ +} + +# For ICCOM main routine +func_iccom() +{ + echo "" + echo "Copying for ICCOM Packages" + + # MD5 check (rigid flag = TRUE) + # In ICCOM, all files are necesarry + func_list_search_and_md5check "${_iccom_km_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + func_list_search_and_md5check "${_iccom_um_list}" "1" + if [ $? -eq 0 ]; then + # library not found. + echo "Skip ICCOM Package" + echo "" + return + fi + + # Install kernel module + func_list_search_and_install_wo_md5check "${_iccom_km_list}" "${_ICCOM_KM_INST_DIR}" + + # Install user module + func_list_search_and_install_wo_md5check "${_iccom_um_list}" "${_ICCOM_UM_INST_DIR}" + + echo "" + echo "Packages for ICCOM were found and copied." + echo /=======================================================/ +} + +################################ +# Copy Script Main routine +################################ +echo "Copyscript for R-Car Gen3" +echo +#### 1) Checking current directory +if [ ! -d meta-rcar-gen3 ]; then + echo "ERROR: Please extract meta-renesas and cd to it, before execute $0" + exit 1 +fi + +#### 2) Checking Arguments +if [ "X$1" = "X" ]; then + usage + exit 1 +fi + +while [ $# -gt 0 ] ; do + case "$1" in + -f|--force) + _no_md5check=1 + ;; + -d|--debug) + _debug=1 + ;; + *) + _src_dirname=$(basename $1) + _src_path=$(cd $(dirname $1) && pwd) + _src_full=${_src_path}/${_src_dirname} + ;; + esac + shift +done + +# source directory check +if [ ! -d ${_src_path}/${_src_dirname} ]; then + echo "${_src_path}/${_src_dirname} not found." + usage + exit 1 +fi + +if [ -n "${_debug}" ]; then + echo "src = ${_src_dirname}" + echo "src_path = ${_src_path}" + echo "src_full = ${_src_full}" + echo "no_md5check = ${_no_md5check}" + echo "" +fi + +##### 3) create temp directory +TMPWORK=${PWD}/CP_SCRIPT_TEMP +if [ -d ${TMPWORK} ]; then + echo "ERROR: Work directory already exist." + exit 1 +fi +install -d -m 700 ${TMPWORK} +cd ${TMPWORK} + +##### 4) copy +# initialize flag +_omx_common_install=0 +_uvcs_install=0 +_audio_common_install=0 +_video_decoder_common_install=0 +_video_encoder_common_install=0 +_dtv_kern_install=0 + +func_gfx +func_audio +func_audio_mw +func_video_decoder +func_video_encoder +func_dtv_dvd +func_cms +func_adsp +func_iccom + +##### 5) cleanup temp directory +func_clean_tempdir + +##### End +echo "Complete copying !" diff --git a/meta-rcar-gen3/docs/sample/copyscript/md5list.txt b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt new file mode 100644 index 0000000..09908e4 --- /dev/null +++ b/meta-rcar-gen3/docs/sample/copyscript/md5list.txt @@ -0,0 +1,54 @@ +# GFX +_MD5_RTM0RC7795GLTG0001SL40C="" +_MD5_RCH3G001L4001ZDO="" +_MD5_RTM0RC7796GLTG0001SL40C="" +_MD5_RCM3G001L4001ZDO="" +_MD5_INFRTM0RC7795GLTG0001SL40C="" +_MD5_INFRTM0RC7796GLTG0001SL40C="" +# OMX AUDIO +_MD5_RTM0AC0000ADAACMZ1SL40C="bd667e3092445ea03a1f058d55357161" +_MD5_RTM0AC0000XAAACD30SL40C="0d6e0b1542ac0d410af52ee9b587c4c4" +_MD5_RTM0AC0000XACMND30SL40C="d6e7aa558ec54d14aa240b85fccedb57" +_MD5_RTM0AC0000ADAAPMZ1SL40C="0b9db0589b0af721fa5c7a7056a2d451" +_MD5_RTM0AC0000ADMP3MZ1SL40C="053243f43212e33e36926ffaf2ddc0a4" +_MD5_RTM0AC0000ADWMAMZ1SL40C="8353f20235a6db52f16ba64c18e58d0f" +_MD5_RTM0AC0000XAAAPD30SL40C="21301077ada5092c19e9c946a0266877" +_MD5_RTM0AC0000XAMP3D30SL40C="a1880b189f4d7055a9fed70cdb9f1a5c" +_MD5_RTM0AC0000XAWMAD30SL40C="dff1c890612240b9ed2fcb021a37a6e7" +_MD5_RTM0AC0000AEAACMZ1SL40C="652d8f15c327646f9760de9f9a5f1dc2" +_MD5_RTM0AC0000XAAACE30SL40C="fb5489c649f825caea9ec6cf8edbad57" +_MD5_RTM0AC0000XAALAD30SL40C="30fa3e66807c3f5b7d09a6e5eec60c01" +_MD5_RTM0AC0000XAFLAD30SL40C="161bbf4cd51006fcc184d593ed53047f" +_MD5_RTM0AC0000XADD5D30SL40C="d712ce9d896db9204f62cbd65de5a7ab" +_MD5_RTM0AC0000ADDD5MZ1SL40C="" +# OMX VIDEO +_MD5_RTM0AC0000XV263D30SL40C="a4fbfc8091940004f324261d607b02eb" +_MD5_RTM0AC0000XV264D30SL40C="7b8efc458a432e6154d11835470adf82" +_MD5_RTM0AC0000XCMCTL30SL40C="ef10f4390774101cc42973dd34b10ace" +_MD5_RCG3VUDRL4001ZDO="50b7fa17e27059f93378745e21e8c087" +_MD5_RTM0AC0000XVCMND30SL40C="709f278ae7aeea1a1ce7d4b5d9832b21" +_MD5_RTM0AC0000XV265D30SL40C="145c841dae7a02cd2e4a3a4696c641f1" +_MD5_RTM0AC0000XVM2VD30SL40C="73f45b86a6ead4fe66c2f52494449491" +_MD5_RTM0AC0000XVM4VD30SL40C="0d19e9b474a6e7062663d3d892b87039" +_MD5_RTM0AC0000XVVC1D30SL40C="c37767c5beac63cc1a1607f3506a9520" +_MD5_RTM0AC0000XVCMNE30SL40C="1b6f699c432d10f4eaed56f4666f1f8a" +_MD5_RTM0AC0000XV264E30SL40C="e2e283c378e333bb6d5ad8205f143caf" +_MD5_RTM0AC0000XVDVXD30SL40C="7f459cc9ce9f95413101afbf7bcd80d3" +_MD5_RTM0AC0000XVRLVD30SL40C="db023a5aa5733307516fd13c3b705268" +# DTV/DVD +_MD5_RCG3T001L4001ZDO="" +_MD5_RTM0RC0000TE020000SL40C1="" +_MD5_RTM0RC0000TE020000SL40C2="" +_MD5_RTM0RC0000XDVDC301SL40C="" +# CMS +_MD5_RTM0AC0000JRCMBCV0SL40C="a0cbfaa60ff57ce214da102363f77bf2" +_MD5_RTM0AC0000JRCMBLC0SL40C="e472cc72ef07fc8b6fdeffa7e7f11650" +_MD5_RTM0AC0000JRCMDGV0SL40C="154634b2517211a00f9f1d28344edf64" +# ADSP +_MD5_RCG3AHFWN0101ZDP="d1acca667c26f3285619ca737bf0625c" +_MD5_RCG3AHIFL4001ZDP="7fc31a6c6ce97a8104cd298d8a177ba6" +_MD5_RCG3AHPDL4001ZDO="6feb62ac5839bfdb7c85f99b3e1bf50e" +# ICCOM +_MD5_RCG3ZLIDL4001ZNO1="ca3528b8928f44337717ae4c5674a344" +_MD5_RCG3ZLIDL4001ZNO2="410daab0f338e4311a6e4422f770d3ee" +_MD5_RCG3ZLILL4001ZNO="e01be9227b87dffd2c23d1067d5fa1b6" diff --git a/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch new file mode 100644 index 0000000..c00327f --- /dev/null +++ b/meta-rcar-gen3/docs/sample/patch/patch-for-linaro-gcc/0001-rcar-gen3-add-readme-for-building-with-Linaro-Gcc.patch @@ -0,0 +1,151 @@ +From 019d1f04b83db8cd4d5a9381d5ef0c90e946cd05 Mon Sep 17 00:00:00 2001 +From: Phong Man Tran <phong.tran.wh@rvc.renesas.com> +Date: Mon, 6 Jul 2015 14:48:50 +0700 +Subject: [PATCH] rcar-gen3: add readme for building with Linaro Gcc + +This patch add the dependent layer information, build instructions +for using Linaro Gcc. + +Updated on Dec, 2016: +- Add H3ULCB +- Change supported branch from jethro to krogoth +- Change Maintainer information. + +Signed-off-by: Phong Man Tran <phong.tran.wh@rvc.renesas.com> +Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> +--- + meta-rcar-gen3/README.linaro | 122 +++++++++++++++++++++++++++++++++++++++++++ + 1 file changed, 122 insertions(+) + create mode 100644 meta-rcar-gen3/README.linaro + +diff --git a/meta-rcar-gen3/README.linaro b/meta-rcar-gen3/README.linaro +new file mode 100644 +index 0000000..6542d43 +--- /dev/null ++++ b/meta-rcar-gen3/README.linaro +@@ -0,0 +1,122 @@ ++meta-rcar-gen3 ++============== ++ ++This layer provides that evaluation board is mounted ARM SoCs of Renesas ++Electronics, called the R-Car Generation 3. Currently, this supports ++board and the SoCs of the following: ++ - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3) ++ - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 ++ ++Patches ++======= ++ ++Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com ++Please see the MAINTAINERS file for more details. ++ ++Dependencies ++============ ++ ++This layer depends on: ++ ++ URI: git://git.yoctoproject.org/poky ++ layers: meta, meta-yocto, meta-yocto-bsp ++ branch: krogoth ++ ++ URI: git://git.yoctoproject.org/meta-renesas ++ layers: meta-rcar-gen3 ++ branch: krogoth ++ ++ URI: https://git.linaro.org/openembedded/meta-linaro.git ++ layers: meta-linaro-toolchain ++ branch: krogoth ++ ++ URI: git://git.openembedded.org/meta-openembedded ++ layers: meta-oe ++ branch: krogoth ++ ++Build Instructions ++================== ++ ++The following instructions require a Poky installation (or equivalent). ++ ++Initialize a build using the 'oe-init-build-env' script in Poky. e.g.: ++ ++ $ source poky/oe-init-build-env ++ ++After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.: ++ ++ BBLAYERS ?= " \ ++ <path to layer>/poky/meta \ ++ <path to layer>/poky/meta-yocto \ ++ <path to layer>/poky/meta-yocto-bsp \ ++ <path to layer>/meta-renesas/meta-rcar-gen3 \ ++ <path to layer>/meta-linaro/meta-linaro-toolchain \ ++ <path to layer>/meta-openembedded/meta-oe \ ++ " ++ ++To build a specific target BSP, configure the associated machine in local.conf: ++ ++ MACHINE ??= "<supported board name>" ++ ++Select the SOC ++ ++ For H3: r8a7795 ++ SOC_FAMILY = "r8a7795" ++ ++ For M3: r8a7796 ++ SOC_FAMILY = "r8a7796" ++ ++Must change the package class to ipk files in local.conf: ++ ++ PACKAGE_CLASSES ?= "package_ipk" ++ ++Must Change the Gcc version in local.conf. ++ ++ GCCVERSION="linaro-5.2" ++ ++Configure for systemd init in local.conf: ++ ++ DISTRO_FEATURES_append = " systemd" ++ VIRTUAL-RUNTIME_init_manager = "systemd" ++ ++Build the target file system image using bitbake: ++ ++ $ bitbake core-image-minimal ++ ++After completing the images for the target machine will be available in the output ++directory 'tmp/deploy/images/<supported board name>'. ++ ++Images generated: ++ * Image (generic Linux Kernel binary image file) ++ * Image-<machine name>.dtb (DTB for target machine) ++ * core-image-minimal-<machine name>.tar.bz2 (rootfs tar+bzip2) ++ * core-image-minimal-<machine name>.ext4 (rootfs ext4 format) ++ * core-image-minimal-<machine name>.cpio.gz (rootfs cpio+gz format) ++ ++Build Instructions for SDK ++========================== ++This may be changed in the near feature. These instructions are tentative. ++ ++Should define the staticdev in SDK image feature for installing the static libs ++to SDK in local.conf. ++ ++ SDKIMAGE_FEATURES_append = " staticdev-pkgs" ++ ++Use bitbake -c populate_sdk for generating the toolchain SDK: ++For 64-bit target SDK (aarch64): ++ ++ $ bitbake core-image-minimal -c populate_sdk ++ ++The SDK can be found in the output directory 'tmp/deploy/sdk' ++ * poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh ++ ++Usage of toolchain SDK: ++Install the SDK to the default: /opt/poky/x.x ++(x.x is YP version, i.e. 2.1.) ++For 64-bit target SDK: ++ ++ $ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh ++ ++For 64-bit application use environment script in /opt/poky/x.x ++ ++ $ source /opt/poky/x.x/environment-setup-aarch64-poky-linux +-- +1.9.1 + |