7 files changed, 47 insertions, 158 deletions
diff --git a/meta-rcar-gen3/conf/machine/ebisu.conf b/meta-rcar-gen3/conf/machine/ebisu.conf
index fe883e3..59ded18 100644
--- a/meta-rcar-gen3/conf/machine/ebisu.conf
+++ b/meta-rcar-gen3/conf/machine/ebisu.conf
@@ -6,23 +6,8 @@ SOC_FAMILY = "r8a77990"
 
 DEFAULTTUNE ?= "cortexa53"
 require conf/machine/include/tune-cortexa53.inc
-require conf/machine/include/${SOC_FAMILY}.inc
+require conf/machine/include/rcar_common.inc
 
-# 32BIT package install (default is disable)
-# This variables can be used only in multilib.
-USE_32BIT_PKGS ?= "0"
-USE_32BIT_WAYLAND ?= "0"
-USE_32BIT_MMP ?= "0"
-
-MACHINE_FEATURES = ""
-
-KERNEL_IMAGETYPE = "Image"
-IMAGE_FSTYPES_append = " tar.bz2 ext4"
-
-SERIAL_CONSOLES = "115200;ttySC0"
-
-# Configuration for kernel
-PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
 # Device tree for E3
 KERNEL_DEVICETREE = " \
     renesas/r8a77990-ebisu.dtb \
@@ -31,22 +16,7 @@ KERNEL_DEVICETREE = " \
     renesas/r8a77990-es10-ebisu-4d.dtb \
 "
 
-# Configuration for ARM Trusted Firmware
-EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
-
-# u-boot
-PREFERRED_VERSION_u-boot = "v2018.09%"
-EXTRA_IMAGEDEPENDS += " u-boot"
 # E3 u-boot configure
 UBOOT_CONFIG ??= "ebisu ebisu-4d"
 UBOOT_CONFIG[ebisu] = "r8a77990_ebisu_defconfig"
 UBOOT_CONFIG[ebisu-4d] = "r8a77990_ebisu-4d_defconfig"
-
-# libdrm
-PREFERRED_VERSION_libdrm = "2.4.100"
-
-# Add variable to Build Configuration in build log
-BUILDCFG_VARS_append = " SOC_FAMILY"
-
-# Command using to build kernel-module-gles
-HOSTTOOLS += "sync"
diff --git a/meta-rcar-gen3/conf/machine/h3ulcb.conf b/meta-rcar-gen3/conf/machine/h3ulcb.conf
index 134bf82..78e6e4f 100644
--- a/meta-rcar-gen3/conf/machine/h3ulcb.conf
+++ b/meta-rcar-gen3/conf/machine/h3ulcb.conf
@@ -6,47 +6,16 @@ SOC_FAMILY = "r8a7795"
 
 DEFAULTTUNE ?= "cortexa57-cortexa53"
 require conf/machine/include/tune-cortexa57-cortexa53.inc
-require conf/machine/include/${SOC_FAMILY}.inc
+require conf/machine/include/rcar_ulcb.inc
 
-# 32BIT package install (default is disable)
-# This variables can be used only in multilib.
-USE_32BIT_PKGS ?= "0"
-USE_32BIT_WAYLAND ?= "0"
-USE_32BIT_MMP ?= "0"
-
-MACHINE_FEATURES = ""
-
-KERNEL_IMAGETYPE = "Image"
-IMAGE_FSTYPES_append = " tar.bz2 ext4"
-
-SERIAL_CONSOLES = "115200;ttySC0"
-
-# Configuration for kernel
-PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+# Device tree for H3ULCB
 KERNEL_DEVICETREE = " \
     renesas/r8a7795-h3ulcb.dtb \
     renesas/r8a7795-es1-h3ulcb.dtb \
     renesas/r8a7795-h3ulcb-4x2g.dtb \
 "
 
-# Configuration for ARM Trusted Firmware
-EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
-
-# u-boot
-PREFERRED_VERSION_u-boot = "v2018.09%"
-EXTRA_IMAGEDEPENDS += " u-boot"
 # H3ULCB u-boot configure
 UBOOT_CONFIG ??= "h3ulcb h3ulcb-4x2g"
 UBOOT_CONFIG[h3ulcb] = "r8a7795_ulcb_defconfig"
 UBOOT_CONFIG[h3ulcb-4x2g] = "r8a7795_ulcb-4x2g_defconfig"
-
-# libdrm
-PREFERRED_VERSION_libdrm = "2.4.100"
-
-# Add variable to Build Configuration in build log
-BUILDCFG_VARS_append = " SOC_FAMILY"
-
-MACHINEOVERRIDES .= ":ulcb"
-
-# Command using to build kernel-module-gles
-HOSTTOOLS += "sync"
diff --git a/meta-rcar-gen3/conf/machine/include/rcar_common.inc b/meta-rcar-gen3/conf/machine/include/rcar_common.inc
new file mode 100644
index 0000000..90b385c
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/include/rcar_common.inc
@@ -0,0 +1,33 @@
+require conf/machine/include/${SOC_FAMILY}.inc
+
+# 32BIT package install (default is disable)
+# This variables can be used only in multilib.
+USE_32BIT_PKGS ?= "0"
+USE_32BIT_WAYLAND ?= "0"
+USE_32BIT_MMP ?= "0"
+
+MACHINE_FEATURES = ""
+
+KERNEL_IMAGETYPE = "Image"
+IMAGE_FSTYPES_append = " tar.bz2 ext4"
+
+SERIAL_CONSOLES = "115200;ttySC0"
+
+# Configuration for kernel
+PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+
+# Configuration for ARM Trusted Firmware
+EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
+
+# u-boot
+PREFERRED_VERSION_u-boot = "v2018.09%"
+EXTRA_IMAGEDEPENDS += " u-boot"
+
+# libdrm
+PREFERRED_VERSION_libdrm = "2.4.100"
+
+# Add variable to Build Configuration in build log
+BUILDCFG_VARS_append = " SOC_FAMILY"
+
+# Command using to build kernel-module-gles
+HOSTTOOLS += "sync"
diff --git a/meta-rcar-gen3/conf/machine/include/rcar_ulcb.inc b/meta-rcar-gen3/conf/machine/include/rcar_ulcb.inc
new file mode 100644
index 0000000..1c107ef
--- /dev/null
+++ b/meta-rcar-gen3/conf/machine/include/rcar_ulcb.inc
@@ -0,0 +1,3 @@
+require conf/machine/include/rcar_common.inc
+
+MACHINEOVERRIDES .= ":ulcb"
diff --git a/meta-rcar-gen3/conf/machine/m3nulcb.conf b/meta-rcar-gen3/conf/machine/m3nulcb.conf
index 0e3f6af..a6054d7 100644
--- a/meta-rcar-gen3/conf/machine/m3nulcb.conf
+++ b/meta-rcar-gen3/conf/machine/m3nulcb.conf
@@ -6,40 +6,10 @@ SOC_FAMILY = "r8a77965"
 
 DEFAULTTUNE ?= "cortexa57"
 require conf/machine/include/tune-cortexa57.inc
-require conf/machine/include/${SOC_FAMILY}.inc
+require conf/machine/include/rcar_ulcb.inc
 
-# 32BIT package install (default is disable)
-# This variables can be used only in multilib.
-USE_32BIT_PKGS ?= "0"
-USE_32BIT_WAYLAND ?= "0"
-USE_32BIT_MMP ?= "0"
-
-MACHINE_FEATURES = ""
-
-KERNEL_IMAGETYPE = "Image"
-IMAGE_FSTYPES_append = " tar.bz2 ext4"
-
-SERIAL_CONSOLES = "115200;ttySC0"
-
-# Configuration for kernel
-PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+# Device tree for M3NULCB
 KERNEL_DEVICETREE = "renesas/r8a77965-m3nulcb.dtb"
 
-# Configuration for ARM Trusted Firmware
-EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
-
-# u-boot
-PREFERRED_VERSION_u-boot = "v2018.09%"
-EXTRA_IMAGEDEPENDS += " u-boot"
+# M3NULCB u-boot configure
 UBOOT_MACHINE = "r8a77965_ulcb_defconfig"
-
-# libdrm
-PREFERRED_VERSION_libdrm = "2.4.100"
-
-# Add variable to Build Configuration in build log
-BUILDCFG_VARS_append = " SOC_FAMILY"
-
-MACHINEOVERRIDES .= ":ulcb"
-
-# Command using to build kernel-module-gles
-HOSTTOOLS += "sync"
diff --git a/meta-rcar-gen3/conf/machine/m3ulcb.conf b/meta-rcar-gen3/conf/machine/m3ulcb.conf
index 8284c9a..af4af81 100644
--- a/meta-rcar-gen3/conf/machine/m3ulcb.conf
+++ b/meta-rcar-gen3/conf/machine/m3ulcb.conf
@@ -6,40 +6,10 @@ SOC_FAMILY = "r8a7796"
 
 DEFAULTTUNE ?= "cortexa57-cortexa53"
 require conf/machine/include/tune-cortexa57-cortexa53.inc
-require conf/machine/include/${SOC_FAMILY}.inc
+require conf/machine/include/rcar_ulcb.inc
 
-# 32BIT package install (default is disable)
-# This variables can be used only in multilib.
-USE_32BIT_PKGS ?= "0"
-USE_32BIT_WAYLAND ?= "0"
-USE_32BIT_MMP ?= "0"
-
-MACHINE_FEATURES = ""
-
-KERNEL_IMAGETYPE = "Image"
-IMAGE_FSTYPES_append = " tar.bz2 ext4"
-
-SERIAL_CONSOLES = "115200;ttySC0"
-
-# Configuration for kernel
-PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
+# Device tree for M3ULCB
 KERNEL_DEVICETREE = "renesas/r8a7796-m3ulcb.dtb"
 
-# Configuration for ARM Trusted Firmware
-EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
-
-# u-boot
-PREFERRED_VERSION_u-boot = "v2018.09%"
-EXTRA_IMAGEDEPENDS += " u-boot"
+# M3ULCB u-boot configure
 UBOOT_MACHINE = "r8a7796_ulcb_defconfig"
-
-# libdrm
-PREFERRED_VERSION_libdrm = "2.4.100"
-
-# Add variable to Build Configuration in build log
-BUILDCFG_VARS_append = " SOC_FAMILY"
-
-MACHINEOVERRIDES .= ":ulcb"
-
-# Command using to build kernel-module-gles
-HOSTTOOLS += "sync"
diff --git a/meta-rcar-gen3/conf/machine/salvator-x.conf b/meta-rcar-gen3/conf/machine/salvator-x.conf
index 95e0471..f18af18 100644
--- a/meta-rcar-gen3/conf/machine/salvator-x.conf
+++ b/meta-rcar-gen3/conf/machine/salvator-x.conf
@@ -2,7 +2,8 @@
 #@NAME: Salvator-X machine
 #@DESCRIPTION: Machine configuration for running Salvator-X
 
-require conf/machine/include/${SOC_FAMILY}.inc
+require conf/machine/include/rcar_common.inc
+
 # Add default tune for H3/M3
 DEFAULTTUNE ?= "cortexa57-cortexa53"
 # Add default tune for M3N
@@ -14,21 +15,6 @@ TUNE_CONF_r8a77965 = "conf/machine/include/tune-cortexa57.inc"
 
 require ${TUNE_CONF}
 
-# 32BIT package install (default is disable)
-# This variables can be used only in multilib.
-USE_32BIT_PKGS ?= "0"
-USE_32BIT_WAYLAND ?= "0"
-USE_32BIT_MMP ?= "0"
-
-MACHINE_FEATURES = ""
-
-KERNEL_IMAGETYPE = "Image"
-IMAGE_FSTYPES_append = " tar.bz2 ext4"
-
-SERIAL_CONSOLES = "115200;ttySC0"
-
-# Configuration for kernel
-PREFERRED_PROVIDER_virtual/kernel = "linux-renesas"
 # Device tree for H3
 KERNEL_DEVICETREE_r8a7795 = " \
     renesas/r8a7795-es1-salvator-x.dtb \
@@ -49,9 +35,6 @@ KERNEL_DEVICETREE_r8a77965 = " \
     renesas/r8a77965-salvator-xs.dtb \
 "
 
-# Configuration for ARM Trusted Firmware
-EXTRA_IMAGEDEPENDS += " arm-trusted-firmware optee-os"
-
 # u-boot
 PREFERRED_VERSION_u-boot = "v2018.09%"
 EXTRA_IMAGEDEPENDS += " u-boot"
@@ -70,12 +53,3 @@ UBOOT_CONFIG[r8a7796_salvator-xs-2x4g] = "r8a7796_salvator-xs-2x4g_defconfig"
 UBOOT_CONFIG_r8a77965 ??= "r8a77965_salvator-x r8a77965_salvator-xs"
 UBOOT_CONFIG[r8a77965_salvator-x] = "r8a77965_salvator-x_defconfig"
 UBOOT_CONFIG[r8a77965_salvator-xs] = "r8a77965_salvator-xs_defconfig"
-
-# libdrm
-PREFERRED_VERSION_libdrm = "2.4.100"
-
-# Add variable to Build Configuration in build log
-BUILDCFG_VARS_append = " SOC_FAMILY"
-
-# Command using to build kernel-module-gles
-HOSTTOOLS += "sync"