aboutsummaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3
diff options
context:
space:
mode:
Diffstat (limited to 'meta-rcar-gen3')
-rw-r--r--meta-rcar-gen3/README.evaproprietary.md115
-rw-r--r--meta-rcar-gen3/README.md193
-rw-r--r--meta-rcar-gen3/README.proprietary.md193
3 files changed, 367 insertions, 134 deletions
diff --git a/meta-rcar-gen3/README.evaproprietary.md b/meta-rcar-gen3/README.evaproprietary.md
new file mode 100644
index 0000000..83dc92b
--- /dev/null
+++ b/meta-rcar-gen3/README.evaproprietary.md
@@ -0,0 +1,115 @@
+# R-Car Gen3 Evaluation Software Package for Linux
+
+
+The meta-rcar-gen3 layer of meta-renesas supports the Click-through licensed
+Linux Drivers and Gfx/MMP packages.
+
+This README describes how to use these features and setting local.conf.
+
+```bash
+ I/ Build configuration
+ II/ Obtain and Install Renesas Graphics Drivers
+```
+
+**NOTE:**
+
+* However, to have a completed local.conf, please also refer to Build
+Instruction in meta-renesas/meta-rcar-gen3/README.
+
+* In addition, these libraries are not provided with recipes. If you would like
+to use, you will need to get them from Renesas.
+
+## I/ Build configuration
+
+
+* Add the target board to local.conf
+
+ * For Salvator-X board
+
+ ```bash
+ MACHINE = "salvator-x"
+ ```
+
+ * For R-Car Starter Kit Premier(H3ULCB) board
+
+ ```bash
+ MACHINE = "h3ulcb"
+ ```
+
+ * For R-Car Starter Kit Pro(M3ULCB) board
+
+ ```bash
+ MACHINE = "m3ulcb"
+ ```
+
+ * For Ebisu board
+
+ ```bash
+ MACHINE = "ebisu"
+ ```
+
+* Set SOC family name
+
+ * For H3: r8a7795
+
+ ```bash
+ SOC_FAMILY = "r8a7795"
+ ```
+
+ * For M3: r8a7796
+
+ ```bash
+ SOC_FAMILY = "r8a7796"
+ ```
+
+ * For M3N: r8a77965
+
+ ```bash
+ SOC_FAMILY = "r8a77965"
+ ```
+
+ * For E3: r8a77990
+
+ ```bash
+ # Already added in machine config: ebisu.conf
+ SOC_FAMILY = "r8a77990"
+ ```
+
+* When using the click-through version of the gfx/mmp packages, you need to add
+the following to your local.conf
+
+```bash
+ DISTRO_FEATURES_append = " use_eva_pkg"
+```
+
+## II/ Obtain and Install Renesas Graphics Drivers
+
+
+Before setting up the build environment, you need to download the proprietary
+drivers.
+
+* Download Renesas graphic drivers with a "click through" license from
+[Renesas website][rcar Linux Drivers] and unzip them into a folder.
+
+**NOTE:**
+
+* You have to register with a free account on MyRenesas and accept the license
+conditions before downloading the drivers.
+The operation is fast and simple nevertheless mandatory to access evaluation of
+non open-source drivers for free.
+Once you registered, you can download two zip files.
+
+```bash
+$ cd <folder containing the two zip files>
+$ unzip -o R-Car_Gen3_Series_Evaluation_Software_Package_for_Linux-*.zip
+$ unzip -o R-Car_Gen3_Series_Evaluation_Software_Package_of_Linux_Drivers-*.zip
+```
+
+To install them into the correct place in the Yocto BSP, a copy script is used.
+
+```bash
+$ cd ./meta-renesas
+$ sh meta-rcar-gen3/docs/sample/copyscript/copy_evaproprietary_softwares.sh <path to the folder containing the packages>
+```
+
+[rcar Linux Drivers]: https://www.renesas.com/us/en/solutions/automotive/rcar-download/rcar-demoboard-2.html
diff --git a/meta-rcar-gen3/README.md b/meta-rcar-gen3/README.md
index 83ec2be..cad7736 100644
--- a/meta-rcar-gen3/README.md
+++ b/meta-rcar-gen3/README.md
@@ -1,50 +1,97 @@
# meta-rcar-gen3
-This layer provides that evaluation board is mounted ARM SoCs of Renesas
-Electronics, called the R-Car Generation 3. Currently, this supports
-board and the SoCs of the following:
-- Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3), R8A77965 (R-Car M3N)
-- Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 (R-Car H3)
-- Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796 (R-Car M3)
-- Board: Ebisu / SoC: R8A77990 (R-Car E3)
-## Patches
+This layer provides the support for the evaluation board mounted ARM SoCs of
+Renesas Electronics, called the R-Car Generation 3.
-Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com
-Please see the MAINTAINERS file for more details.
+Currently, this supports boards and the SoCs of the following:
+
+```bash
+ - Board: Salvator-X / SoC: R8A7795 (R-Car H3), R8A7796 (R-Car M3), R8A77965 (R-Car M3N)
+ - Board: R-Car Starter Kit premier(H3ULCB) / SoC: R8A7795 (R-Car H3)
+ - Board: R-Car Starter Kit pro(M3ULCB) / SoC: R8A7796 (R-Car M3)
+ - Board: Ebisu / SoC: R8A77990 (R-Car E3)
+```
+
+## Branch Policy
+
+
+* This is Community Yocto BSP to follow Yocto/Poky releases.
+
+* It is not supported to the level of the Customer Yocto BSP.
+
+## Tag Policy
+
+
+* Releases are created from the respective working branch.
+
+* After a Customer Yocto BSP version releases, the Community Yocto BSP will be
+rebased and released accordingly.
+
+* thud-X:
+
+ * The versions used on thud (Yocto Project 2.6) will start on
+ thud-Yocto-v3.15.0 to keep the major version numbers in sync.
+
+## Contribution
+
+
+* Please submit any patches for this layer to: takamitsu.honda.pv@renesas.com
+
+* Please see the MAINTAINERS file for more details.
+
+## Layer Dependencies
-## Dependencies
This layer depends on:
+* poky
+
+```bash
URI: git://git.yoctoproject.org/poky
layers: meta, meta-yocto, meta-yocto-bsp
- branch: rocko
+ branch: thud
+ revision: 84eecb017ef92ef36b4df730908828e54aeff85c
+```
+* meta-linaro
+```bash
URI: git://git.linaro.org/openembedded/meta-linaro.git
layers: meta-optee
- branch: rocko
+ branch: thud
+ revision: edb7ffc2a121df7596385595abe75180296103e0
+```
+* meta-openembedded
+
+```bash
URI: git://git.openembedded.org/meta-openembedded
layers: meta-oe
- branch: rocko
+ branch: thud
+ revision: cca27b5ea7569d2730ee5da7ee7f47b39d775d89
+```
## Build Instructions
+
The following instructions require a Poky installation (or equivalent).
-This also needs git user name and email defined:
+* This also needs git user name and email defined:
+
```bash
$ git config --global user.email "you@example.com"
$ git config --global user.name "Your Name"
```
-Initialize a build using the 'oe-init-build-env' script in Poky. e.g.:
+* Initialize a build using the 'oe-init-build-env' script in Poky. e.g.:
+
```bash
$ source poky/oe-init-build-env
```
-After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer. e.g.:
+* After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer.
+e.g.:
+
```bash
BBLAYERS ?= " \
<path to layer>/poky/meta \
@@ -55,90 +102,130 @@ After that, initialized configure bblayers.conf by adding meta-rcar-gen3 layer.
<path to layer>/meta-openembedded/meta-oe \
"
```
-To build a specific target BSP, configure the associated machine in local.conf:
+
+* To build a specific target BSP, configure the associated machine in local.conf:
+
```bash
MACHINE ??= "<supported board name>"
```
-Select the SOC
-```bash
- For H3: r8a7795
- SOC_FAMILY = "r8a7795"
- For M3: r8a7796
- SOC_FAMILY = "r8a7796"
+* Select the SOC
- For M3N: r8a77965
- SOC_FAMILY = "r8a77965"
+ * For H3: r8a7795
+
+ ```bash
+ SOC_FAMILY = "r8a7795"
+ ```
+
+ * For M3: r8a7796
+
+ ```bash
+ SOC_FAMILY = "r8a7796"
+ ```
+
+ * For M3N: r8a77965
+
+ ```bash
+ SOC_FAMILY = "r8a77965"
+ ```
+
+ * For E3: r8a77990
+
+ ```bash
+ # Already added in machine config: ebisu.conf
+ SOC_FAMILY = "r8a77990"
+ ```
+
+* Configure for systemd init in local.conf:
- For E3: r8a77990
- SOC_FAMILY = "r8a77990"
- Already added in machine config: ebisu.conf
-```
-Configure for systemd init in local.conf:
```bash
DISTRO_FEATURES_append = " systemd"
VIRTUAL-RUNTIME_init_manager = "systemd"
```
-Configure for ivi-shell and ivi-extension
+
+* Configure for ivi-shell and ivi-extension
+
```bash
DISTRO_FEATURES_append = " ivi-shell"
```
-Configure for USB 3.0
+
+* Configure for USB 3.0
+
```bash
MACHINE_FEATURES_append = " usb3"
```
-Enable tuning support for Capacity Aware migration Strategy (CAS)
+
+* Enable tuning support for Capacity Aware migration Strategy (CAS)
+
```bash
MACHINE_FEATURES_append = " cas"
```
-Build the target file system image using bitbake:
+
+* Build the target file system image using bitbake:
+
```bash
$ bitbake core-image-minimal
```
-After completing the images for the target machine will be available in the output
-directory _'tmp/deploy/images/<supported board name>'_.
+
+After completing the images for the target machine will be available in the
+output directory 'tmp/deploy/images/<supported board name>'.
Images generated:
+
* Image (generic Linux Kernel binary image file)
+
* Image-<machine name>.dtb (DTB for target machine)
+
* core-image-minimal-<machine name>.tar.bz2 (rootfs tar+bzip2)
+
* core-image-minimal-<machine name>.ext4 (rootfs ext4 format)
## Build Instructions for SDK
-This may be changed in the near feature. These instructions are tentative.
+
+NOTE:
+
+**This may be changed in the near feature. These instructions are tentative.**
Should define the staticdev in SDK image feature for installing the static libs
to SDK in local.conf.
+
```bash
SDKIMAGE_FEATURES_append = " staticdev-pkgs"
```
-Use bitbake -c populate_sdk for generating the toolchain SDK:
-For 64-bit target SDK (aarch64):
+
+### For 64-bit target SDK (aarch64)
+
+
+Use `bitbake -c populate_sdk` for generating the toolchain SDK
+
```bash
$ bitbake core-image-minimal -c populate_sdk
```
-The SDK can be found in the output directory _'tmp/deploy/sdk'_
- poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
+The SDK can be found in the output directory `tmp/deploy/sdk`
+
+* `poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh`
+
+### Usage of toolchain SDK
+
+
+Install the SDK to the default: `/opt/poky/x.x`
+
+* For 64-bit target SDK
-Usage of toolchain SDK: Install the SDK to the default: _/opt/poky/x.x_
-For 64-bit target SDK:
```bash
$ sh poky-glibc-x86_64-core-image-minimal-aarch64-toolchain-x.x.sh
```
-For 64-bit application use environment script in _/opt/poky/x.x_
+
+* For 64-bit application, using environment script in `/opt/poky/x.x`
+
```bash
$ source /opt/poky/x.x/environment-setup-aarch64-poky-linux
```
-## ULCB Information
-
-Refer to the following for more information of ULCB:
-
- http://elinux.org/R-Car
-## The information on building and running Yocto on R-Car Generation 3
+## R-Car Generation 3 Information
-Refer to the following for more information:
- https://elinux.org/R-Car/Boards/Yocto-Gen3
+Refer to the following for more information from eLinux website
+https://elinux.org/R-Car
diff --git a/meta-rcar-gen3/README.proprietary.md b/meta-rcar-gen3/README.proprietary.md
index b3f395b..43c324a 100644
--- a/meta-rcar-gen3/README.proprietary.md
+++ b/meta-rcar-gen3/README.proprietary.md
@@ -1,15 +1,15 @@
# Proprietary libraries for meta-rcar-gen3
-The meta-rcar-gen3 layer of meta-renesas is supported Graphic GLES(GSX) libraries,
-proprietary library of multimedia, and ICCOM software.
+
+The meta-rcar-gen3 layer of meta-renesas is supported Graphic GLES(GSX)
+libraries, proprietary library of multimedia, and ICCOM software.
This README describes how to use these features and setting to local.conf.
-```
- I/ Board configuration
- II/ Build with GLES
- III/ Build with Renesas multimedia libraries
- IV/ Enable Linux ICCOM driver and Linux ICCOM library
+```bash
+ I/ Board configuration
+ II/ Build with GLES
+ III/ Build with Renesas multimedia libraries
```
There are 2 main paths:
@@ -17,51 +17,68 @@ There are 2 main paths:
* Please check section II to config for GLES.
* Please check section III to enable Multimedia functions.
-If you would like to use Linux ICCOM driver and Linux ICCOM library,
-please check section IV.
+If you would like to use Linux ICCOM driver and Linux ICCOM library, please
+check section IV.
-**Note:**
+**NOTE:**
-* However, to have a completed local.conf,
-please also refer to Build Instruction in _meta-renesas/meta-rcar-gen3/README_.
-* In addition, these libraries are not provided with recipes. If you would like to use,
-you will need to get them from Renesas.
+* However, to have a completed local.conf, please also refer to Build
+Instruction in meta-renesas/meta-rcar-gen3/README.
+
+* In addition, these libraries are not provided with recipes. If you would like
+to use, you will need to get them from Renesas.
## I/ Board configuration
+
* Add this line to local.conf
* For Salvator-X board
+
```bash
- MACHINE = "salvator-x"
+ MACHINE = "salvator-x"
```
+
* For R-Car Starter Kit Premier(H3ULCB) board
+
```bash
- MACHINE = "h3ulcb"
+ MACHINE = "h3ulcb"
```
+
* For R-Car Starter Kit Pro(M3ULCB) board
+
```bash
- MACHINE = "m3ulcb"
+ MACHINE = "m3ulcb"
```
+
* For Ebisu board
+
```bash
- MACHINE = "ebisu"
+ MACHINE = "ebisu"
```
-* Set SOC family name:
+
+* Set SOC family name
* For H3: r8a7795
+
```bash
- SOC_FAMILY = "r8a7795"
+ SOC_FAMILY = "r8a7795"
```
+
* For M3: r8a7796
+
```bash
- SOC_FAMILY = "r8a7796"
+ SOC_FAMILY = "r8a7796"
```
+
* For M3N: r8a77965
+
```bash
- SOC_FAMILY = "r8a77965"
+ SOC_FAMILY = "r8a77965"
```
+
* For E3: r8a77990
+
```bash
# Already added in machine config: ebisu.conf
SOC_FAMILY = "r8a77990"
@@ -69,10 +86,12 @@ you will need to get them from Renesas.
## II/ Build with GLES
+
For wayland with GSX
-1. Please copy proprietary libraries to the directory of recipes.
-2. Set local.conf the following.
+* Please copy proprietary libraries to the directory of recipes.
+
+* Set local.conf the following.
```bash
# Enable Gfx Pkgs
@@ -92,78 +111,85 @@ For wayland with GSX
BBMASK = "mesa-gl"
```
-3. Run
-
-```bash
- $ bitbake core-image-weston
-```
+* Run `bitbake core-image-weston`
## III/ Build with Renesas multimedia libraries
+
Multimedia portions depend on GLES portions.
-**A/ Configuration for Multimedia features**
+### A/ Configuration for Multimedia features
+
+
+* Please copy proprietary libraries to the directory of recipes.
+
+* Please set local.conf the following.
-1. Please copy proprietary libraries to the directory of recipes.
-2. Please set local.conf the following.
```bash
- # Enable multimedia features.
- # This provides package group of plug-ins of the GStreamer, multimedia
- # libraries and kernel drivers.
+ # Enable multimedia features.
+ # This provides package group of plug-ins of the GStreamer, multimedia
+ # libraries and kernel drivers.
- MACHINE_FEATURES_append = " multimedia"
+ MACHINE_FEATURES_append = " multimedia"
```
-**B/ Configuration for optional codecs and middleware**
+### B/ Configuration for optional codecs and middleware
+
+
+* Please copy proprietary libraries to the directory of recipes.
+
+* Add features to DISTRO_FEATURES_append to local.conf
-1. Please copy proprietary libraries to the directory of recipes.
-2. Add features to DISTRO_FEATURES_append to local.conf
```bash
- # Additional configuration in OMX module
- " h263dec_lib" - for OMX Media Component H263 Decoder Library
- " h264dec_lib" - for OMX Media Component H264 Decoder Library
- " h264enc_lib" - for OMX Media Component H.264 Encoder Library
- " h265dec_lib" - for OMX Media Component H265 Decoder Library
- " mpeg2dec_lib" - for OMX Media Component MPEG2 Decoder Library
- " mpeg4dec_lib" - for OMX Media Component MPEG4 Decoder Library
- " vc1dec_lib" - for OMX Media Component VC-1 Decoder Library
- " divxdec_lib" - for OMX Media Component DivX Decoder Library
- " rvdec_lib" - for OMX Media Component RealVideo Decoder Library
- " alacdec_lib" - for OMX Media Component ALAC Decoder Library
- " flacdec_lib" - for OMX Media Component FLAC Decoder Library
- " aaclcdec_lib" - for OMX Media Component AAC-LC Decoder Library
- " aaclcdec_mdw" - for AAC-LC 2ch Decoder Middleware for Linux
- " aacpv2dec_lib" - for OMX Media Component aacPlus V2 Decoder Library
- " aacpv2dec_mdw" - for aacPlus V2 Decoder Middleware for Linux
- " mp3dec_lib" - for OMX Media Component MP3 Decoder Library
- " mp3dec_mdw" - for MP3 Decoder Middleware for Linux
- " wmadec_lib" - for OMX Media Component WMA Standard Decoder Library
- " wmadec_mdw" - for WMA Standard Decoder Middleware for Linux
- " dddec_lib" - for OMX Media Component Dolby(R) Digital Decoder Library
- " dddec_mdw" - for Dolby(R) Digital Decoder Middleware for Linux
- " aaclcenc_lib" - for OMX Media Component AAC-LC Encoder Library
- " vp8dec_lib" - for OMX Media Component VP8 Decoder Library for Linux
- " vp8enc_lib" - for OMX Media Component VP8 Encoder Library for Linux
- " vp9dec_lib" - for OMX Media Component VP9 Decoder Library for Linux
- " aaclcenc_mdw" - for AAC-LC Encoder Middleware for Linux
- " cmsbcm" - for CMS Basic Color Management Middleware for Linux
- " cmsblc" - for CMS CMM3 Backlight Control Middleware for Linux
- " cmsdgc" - for CMS VSP2 Dynamic Gamma Correction Middleware for Linux
- " dtv" - for ISDB-T DTV Software Package for Linux
- " dvd" - for DVD Core-Middleware for Linux
- " adsp" - for ADSP driver, ADSP interface and ADSP framework for Linux
- " avb" - for AVB Software Package for Linux
+ # Additional configuration in OMX module
+ " h263dec_lib" - for OMX Media Component H263 Decoder Library
+ " h264dec_lib" - for OMX Media Component H264 Decoder Library
+ " h264enc_lib" - for OMX Media Component H.264 Encoder Library
+ " h265dec_lib" - for OMX Media Component H265 Decoder Library
+ " mpeg2dec_lib" - for OMX Media Component MPEG2 Decoder Library
+ " mpeg4dec_lib" - for OMX Media Component MPEG4 Decoder Library
+ " vc1dec_lib" - for OMX Media Component VC-1 Decoder Library
+ " divxdec_lib" - for OMX Media Component DivX Decoder Library
+ " rvdec_lib" - for OMX Media Component RealVideo Decoder Library
+ " alacdec_lib" - for OMX Media Component ALAC Decoder Library
+ " flacdec_lib" - for OMX Media Component FLAC Decoder Library
+ " aaclcdec_lib" - for OMX Media Component AAC-LC Decoder Library
+ " aaclcdec_mdw" - for AAC-LC 2ch Decoder Middleware for Linux
+ " aacpv2dec_lib" - for OMX Media Component aacPlus V2 Decoder Library
+ " aacpv2dec_mdw" - for aacPlus V2 Decoder Middleware for Linux
+ " mp3dec_lib" - for OMX Media Component MP3 Decoder Library
+ " mp3dec_mdw" - for MP3 Decoder Middleware for Linux
+ " wmadec_lib" - for OMX Media Component WMA Standard Decoder Library
+ " wmadec_mdw" - for WMA Standard Decoder Middleware for Linux
+ " dddec_lib" - for OMX Media Component Dolby(R) Digital Decoder Library
+ " dddec_mdw" - for Dolby(R) Digital Decoder Middleware for Linux
+ " aaclcenc_lib" - for OMX Media Component AAC-LC Encoder Library
+ " vp8dec_lib" - for OMX Media Component VP8 Decoder Library for Linux
+ " vp8enc_lib" - for OMX Media Component VP8 Encoder Library for Linux
+ " vp9dec_lib" - for OMX Media Component VP9 Decoder Library for Linux
+ " aaclcenc_mdw" - for AAC-LC Encoder Middleware for Linux
+ " cmsbcm" - for CMS Basic Color Management Middleware for Linux
+ " cmsblc" - for CMS CMM3 Backlight Control Middleware for Linux
+ " cmsdgc" - for CMS VSP2 Dynamic Gamma Correction Middleware for Linux
+ " dtv" - for ISDB-T DTV Software Package for Linux
+ " dvd" - for DVD Core-Middleware for Linux
+ " adsp" - for ADSP driver, ADSP interface and ADSP framework for Linux
+ " avb" - for AVB Software Package for Linux
```
+
Ex:
-```bash
- DISTRO_FEATURES_append = " h264dec_lib h265dec_lib mpeg2dec_lib aaclcdec_lib aaclcdec_mdw"
```
+ DISTRO_FEATURES_append = " h264dec_lib h265dec_lib mpeg2dec_lib aaclcdec_lib aaclcdec_mdw"
+```
+
+### C/ Configuration for test packages
-**C/ Configuration for test packages**
-Must ensure that Multimedia features have been enabled. (Please refer to III/A to enable Multimedia.)
+Must ensure that Multimedia features have been enabled.
+(Please refer to III/A to enable Multimedia.)
+
+* Please add feature to DISTRO_FEATURES_append to local.conf.
-Please add feature to DISTRO_FEATURES_append to local.conf:
```bash
# Configuration for multimedia test package
@@ -172,10 +198,15 @@ Please add feature to DISTRO_FEATURES_append to local.conf:
## IV/ Enable Linux ICCOM driver and Linux ICCOM library
+
For Linux ICCOM driver and Linux ICCOM library
-1. Please copy proprietary libraries to the directory of recipes.
-2. Please set local.conf the following.
+* Please copy proprietary libraries to the directory of recipes.
+
+* Please set local.conf the following.
+
```bash
- DISTRO_FEATURES_append = " iccom"
+ DISTRO_FEATURES_append = " iccom"
```
+END.
+