diff options
Diffstat (limited to 'meta-rcar-gen3')
21 files changed, 536 insertions, 236 deletions
diff --git a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf index 7b0d9a4..303b9ad 100644 --- a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "ebisu" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf index 16c51eb..e52f839 100644 --- a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf +++ b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/bsp/local.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "ebisu" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf index 5aa6c2f..dc96eb3 100644 --- a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/gfx-only/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "ebisu" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" # Mask MMP recipes @@ -266,9 +281,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" # Add for gstreamer plugins ugly LICENSE_FLAGS_WHITELIST = "commercial" -# Fix the Warning of gstreamer plugins -RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" - # Linux ICCOM driver (RCG3ZLIDL4101ZNO) # Linux ICCOM library (RCG3ZLILL4101ZNO) #DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf index c9cd219..dae6455 100644 --- a/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/ebisu/poky-gcc/mmp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "ebisu" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf index fa3c528..73057cf 100644 --- a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "h3ulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf index 86ae5f2..463b0dc 100644 --- a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/bsp/local.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "h3ulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf index 42aa134..2972826 100644 --- a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/gfx-only/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "h3ulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" # Mask MMP recipes @@ -266,9 +281,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" # Add for gstreamer plugins ugly LICENSE_FLAGS_WHITELIST = "commercial" -# Fix the Warning of gstreamer plugins -RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" - # Linux ICCOM driver (RCG3ZLIDL4101ZNO) # Linux ICCOM library (RCG3ZLILL4101ZNO) #DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf index fca34f7..ae1bbf0 100644 --- a/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "h3ulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" diff --git a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf index 0a4a79b..f298e8f 100644 --- a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "m3nulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf index 4114bd5..c7b5ab2 100644 --- a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf +++ b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/bsp/local.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "m3nulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf index 64e45b9..902577b 100644 --- a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/gfx-only/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "m3nulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" # Mask MMP recipes @@ -266,9 +281,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" # Add for gstreamer plugins ugly LICENSE_FLAGS_WHITELIST = "commercial" -# Fix the Warning of gstreamer plugins -RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" - # Linux ICCOM driver (RCG3ZLIDL4101ZNO) # Linux ICCOM library (RCG3ZLILL4101ZNO) #DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf index a73b537..c99d021 100644 --- a/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/m3nulcb/poky-gcc/mmp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "m3nulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf index 00f5c8c..ef7c778 100644 --- a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "m3ulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf index e5fa697..cf47eb0 100644 --- a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/bsp/local.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "m3ulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf index 9e42306..17e9f6b 100644 --- a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/gfx-only/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "m3ulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" # Mask MMP recipes @@ -266,9 +281,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" # Add for gstreamer plugins ugly LICENSE_FLAGS_WHITELIST = "commercial" -# Fix the Warning of gstreamer plugins -RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" - # Linux ICCOM driver (RCG3ZLIDL4101ZNO) # Linux ICCOM library (RCG3ZLILL4101ZNO) #DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf index 5458748..102c4f4 100644 --- a/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/m3ulcb/poky-gcc/mmp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "m3ulcb" # @@ -124,6 +124,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -157,10 +159,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -218,17 +222,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -257,7 +272,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf index 2f931fd..6626a02 100644 --- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-ltp.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "salvator-x" # This sets the SoC @@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -144,7 +146,7 @@ PACKAGE_CLASSES ?= "package_rpm" # There are other application targets that can be used here too, see # meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. # We default to enabling the debugging tweaks. -EXTRA_IMAGE_FEATURES ?= "debug-tweaks tools-sdk" +EXTRA_IMAGE_FEATURES ?= "debug-tweaks" # # Additional image features @@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf index 5603065..b5523ac 100644 --- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "salvator-x" # This sets the SoC @@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf index 3e991d1..f4c747d 100644 --- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/bsp/local.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "salvator-x" # This sets the SoC @@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf index 1932668..7ef3894 100644 --- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/gfx-only/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "salvator-x" # This sets the SoC @@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -263,7 +278,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" # Mask MMP recipes @@ -272,9 +287,6 @@ BBMASK .= "|kernel-module-uvcs-drv|omx-user-module" # Add for gstreamer plugins ugly LICENSE_FLAGS_WHITELIST = "commercial" -# Fix the Warning of gstreamer plugins -RDEPENDS_gstreamer1.0-plugins-bad = "libwayland-egl" - # Linux ICCOM driver (RCG3ZLIDL4101ZNO) # Linux ICCOM library (RCG3ZLILL4101ZNO) #DISTRO_FEATURES_append = " iccom" diff --git a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf index d5883a4..530ff16 100644 --- a/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf +++ b/meta-rcar-gen3/docs/sample/conf/salvator-x/poky-gcc/mmp/local-wayland.conf @@ -28,13 +28,13 @@ # There are also the following hardware board target machines included for # demonstration purposes: # -#MACHINE ?= "beaglebone" +#MACHINE ?= "beaglebone-yocto" #MACHINE ?= "genericx86" #MACHINE ?= "genericx86-64" #MACHINE ?= "mpc8315e-rdb" #MACHINE ?= "edgerouter" # -# This sets the default machine to be qemux86 if no other machine is selected: +# This sets the default machine to be qemux86-64 if no other machine is selected: MACHINE ??= "salvator-x" # This sets the SoC @@ -130,6 +130,8 @@ PACKAGE_CLASSES ?= "package_rpm" # variable can contain the following options: # "dbg-pkgs" - add -dbg packages for all installed packages # (adds symbol information for debugging/profiling) +# "src-pkgs" - add -src packages for all installed packages +# (adds source code for debugging) # "dev-pkgs" - add -dev packages for all installed packages # (useful if you want to develop against libs in the image) # "ptest-pkgs" - add -ptest packages for all ptest-enabled packages @@ -163,10 +165,12 @@ USER_CLASSES ?= "buildstats image-mklibs image-prelink" # Runtime testing of images # # The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" +# after any root filesystems are created and run tests against those images. It can also +# run tests against any SDK that are built. To enable this uncomment these lines. +# See classes/test{image,sdk}.bbclass for further details. +#IMAGE_CLASSES += "testimage testsdk" +#TESTIMAGE_AUTO_qemuall = "1" + # # Interactive shell configuration # @@ -224,17 +228,28 @@ BB_DISKMON_DIRS ??= "\ #file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ #file://.* file:///some/local/dir/sstate/PATH" +# +# Yocto Project SState Mirror +# +# The Yocto Project has prebuilt artefacts available for its releases, you can enable +# use of these by uncommenting the following line. This will mean the build uses +# the network to check for artefacts at the start of builds, which does slow it down +# equally, it will also speed up the builds by not having to build things if they are +# present in the cache. It assumes you can download something faster than you can build it +# which will depend on your network. +# +#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH" # # Qemu configuration # # By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. By default libsdl-native will +# seen. The two lines below enable the SDL backend too. By default libsdl2-native will # be built, if you want to use your host's libSDL instead of the minimal libsdl built -# by libsdl-native then uncomment the ASSUME_PROVIDED line below. -PACKAGECONFIG_append_pn-qemu-native = " sdl" +# by libsdl2-native then uncomment the ASSUME_PROVIDED line below. +PACKAGECONFIG_append_pn-qemu-system-native = " sdl" PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -#ASSUME_PROVIDED += "libsdl-native" +#ASSUME_PROVIDED += "libsdl2-native" # CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to # track the version of this file when it was generated. This can safely be ignored if @@ -263,7 +278,7 @@ PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" PREFERRED_PROVIDER_virtual/egl = "libegl" PREFERRED_PROVIDER_virtual/libgl = "" PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_virtual/libgbm = "libgbm" PREFERRED_PROVIDER_libgbm-dev = "libgbm" BBMASK .= "|mesa-gl" |