Age | Commit message (Collapse) | Author | Files | Lines | |
---|---|---|---|---|---|
2017-08-10 | KF: fix DU RGB flickering, remove SDR50/104 | 6 | -3/+201 | ||
1) fix DU RGB port flickeringby presclaing clock in VC5 2) limit clock for DU RGB in driver adv7511 to 100Mhz this is according to Gen3 manual limitation for this DU port 3) update README 4) remove SDR50/104 from onboard KF | |||||
2017-08-09 | sound: fixes and improvements | 4 | -101/+29 | ||
PulseAudio: use one config for all boards PulseAudio: fix config files installation ofono: install ofono for HSP and HFP functionality gstreamer: install pulseaudio stuff | |||||
2017-08-09 | Sound: ak4613: suppress warning during pulseaudio probe | 2 | -0/+61 | ||
2017-08-09 | KF: ADV7511 edid fixes, i2c2 speed 400khz, hsusb ws2.0 enable | 3 | -20/+82 | ||
1) fix edid get via adv7511 2) increase i2c2 speed from 100 to 400khz sine #1 fixed 3) enable hsusb for H3 ws2.0 | |||||
2017-08-07 | KF: Add SDR50/104 for SDHI3 | 1 | -1/+3 | ||
SDR50/104 needs to set explicitly. | |||||
2017-08-06 | LVDS: workaroundpatch is not needed anymore | 2 | -29/+0 | ||
optional compilation for Cogent firmware is not needed anymore since driver supports both firmware: Cogent and Vendor | |||||
2017-08-06 | Gen3: LVDS: fix RDCAM21/24 firmware | 1 | -1/+7 | ||
1) This fixes/allows to use both Cogent and vendor firmware 2) this fixes dark envionment show: only for vendor f/w since EMB line is enabled but not showed in frame. Sensor EMB line is used in ISP. | |||||
2017-08-02 | Kingfisher: BT: use proper way to get shutdown gpio | 3 | -9/+71 | ||
2017-08-02 | ADAS boards: fix ssi012(3)9 pinmuxex on H3 and M3 | 1 | -3/+3 | ||
H3 has ssi01239_ctrl group M3 has ssi0129_ctrl group | |||||
2017-08-01 | Kingfisher: install pulseaudio-bluetooth.conf in proper place | 1 | -1/+1 | ||
2017-08-01 | Kingfisher: fixes for bluetooth audio | 4 | -6/+28 | ||
2017-08-01 | Fix build error: kf-v1 does not present anymore | 1 | -3/+0 | ||
2017-07-31 | VIN: fix S_SELECTION (S_CROP IOCTL) | 2 | -0/+68 | ||
2017-07-31 | Image: install kernel-modules | 1 | -0/+1 | ||
2017-07-29 | ADAS boards: separate V0/V1 and V3 (default) KF boards | 1 | -1438/+6627 | ||
2017-07-29 | LVDS cameras: fix typo | 1 | -2/+2 | ||
2017-07-28 | Kingfisher: WiFi: use more recent FW | 1 | -0/+63 | ||
2017-07-28 | Kingfisher: BT: fix RTS/CTS and firmware path | 2 | -11/+11 | ||
2017-07-28 | Kingfisher V3: update m-channel sound support (fix) | 1 | -1/+0 | ||
2017-07-28 | Kingfisher V3: update m-channel sound support | 3 | -315/+45 | ||
On V3 m-channel codec is moved to SSI34, so only minor update of sound driver is necessary. | |||||
2017-07-27 | LVDS: optional compilation for Cogent firmware | 3 | -22/+130 | ||
This allows to use Cogent generated frimware for LVDS cameras (ov490+0v10640). | |||||
2017-07-27 | Kingfisher V3 update | 2 | -0/+108 | ||
- correct SDHI3 for uhs mode enabled - add regulators to pcie-rcar - enable rpi camera | |||||
2017-07-27 | TTA-RDRIVE: remove unused patch | 1 | -1314/+0 | ||
2017-07-25 | Kingfisher: add BT initialization tool/service | 6 | -0/+278 | ||
2017-07-25 | Kingfisher: fix radio init script | 1 | -6/+6 | ||
2017-07-25 | Kingfisher: add pulseaudio | 10 | -0/+560 | ||
Set kingfisher in DISTRO_FEATURES to enable multichannel audio | |||||
2017-07-21 | arm-trusted-firmware: deploy bin files | 1 | -0/+5 | ||
2017-07-17 | arm-trusted-firmware: add nonsecure hyperflash access | 3 | -50/+86 | ||
this fixes non-secure hyperflash access on ws2.0 | |||||
2017-07-15 | lvds/VB/KF, cma memory | 5 | -67/+271 | ||
- KF: set max9286 i2c address to 0x2c - disable eMMC on r8a7795-es1 - max7325: initialize pins to output-low - enlarge cma memory region on ulcb | |||||
2017-07-14 | Kingfisher: Fix BT speed | 3 | -21/+5 | ||
- enable SCI DMA in kernel config - Kingfisher: enable 3,3M baud rate | |||||
2017-07-14 | ov490 switch to vendor's firmware, OV495 OTP ID | 3 | -87/+82 | ||
1) This adds default RDCAM21/RDCAM24 firmware: /usr/share/factory/rcarm21.rdcam24.1280x1080@30.bin If firmware flashed with Cogent samples then it is possible to rollback using script: /usr/share/factory/rdcam21.rdcam24.1280x1080@30.bin ov495: change YUYV -> UYVY ti964/ti954: use FSIN reference clock from camera port0 2) Add ov495 OTP ID | |||||
2017-07-14 | add ov5642, fix DVP in VIN | 6 | -20/+2426 | ||
- add ov5642 driver - fix parallel interfacein VIN - enable CMOS cameras on Kingfisher | |||||
2017-07-14 | Add EDT FT5X06 driver | 1 | -0/+1 | ||
2017-07-14 | KF: enable SAM | 1 | -3/+39 | ||
This enables iPod Authentication chip | |||||
2017-07-14 | KF: fix high rate renedering on adv7511 | 2 | -0/+27 | ||
LVDS DU does not support high freq | |||||
2017-07-14 | KF: ADV7511 EDID read workaround | 1 | -3/+3 | ||
At 400kHZ the EDID may be read with error | |||||
2017-07-14 | ti9x4: fix FSIN | 1 | -6/+6 | ||
2017-07-14 | Kingfisher: SSI, IIO update | 1 | -73/+37 | ||
- change differnet sensor driver - share ssi8 | |||||
2017-07-14 | Pack patches: put all ADAS boards patches on one | 16 | -13993/+13643 | ||
2017-07-13 | Add firmwares and tools for wireless | 7 | -1/+100 | ||
- AM/FM receiver tools (si-tool) - wifi wl18xx firmware - Bluetooth tools | |||||
2017-07-13 | Kingfisher: add multichannel audio, IMU driver | 6 | -26/+1789 | ||
- Fix multichannel in rcar sound (optional compilation) - add IMU driver - enable new sensor drivers - enalbe v3 usb3.0 firmware - deploy Videobox dtb files | |||||
2017-07-13 | add H3 Videobox board | 2 | -0/+4141 | ||
2017-07-13 | add IIO Utils | 3 | -0/+32 | ||
2017-07-10 | I2C switch: fix PCA954x i2c expander access | 2 | -0/+52 | ||
2017-07-05 | HAD: add missed serial alias for console | 2 | -2/+4 | ||
2017-07-01 | systemd: fix rootfs on NFS | 1 | -2/+4 | ||
Do not reconfigure the link for eth0 interface. This fixes the case when we use rootfs on NFS | |||||
2017-06-14 | Add weston patches: toytoolkit, ivi shell patches | 7 | -0/+1712 | ||
2017-06-14 | Add gstreamer patches for gst wayland header | 3 | -0/+73 | ||
2017-06-14 | Add libsubg1 recipe | 3 | -0/+28 | ||
2017-06-14 | Add ctemplate recipe | 3 | -0/+32 | ||