summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2018-02-26V3MZF: fix Micrel reset lineVladimir Barinov1-1/+4
2018-02-26Enable thermal sensor driver for V3MAndrey Dolnikov1-0/+1
2018-02-26V3MSK: unify env variables in QSPI and fix cpld accessVladimir Barinov1-3/+5
1) set env veriables in QSPI instead of eMMC 2) on VBM V2 the gp0_14 is used to disable conflicting with CPLD pin from CANFD transceiver
2018-02-26Fix typoVladimir Barinov1-1/+1
This fixes the typo during patch update
2018-02-26V3M Eagle: remove du_pins htat are not usedVladimir Barinov1-8/+1
Remove dependencey on RGB pins since theare are not used on Eagle board. The LVDS interface is used.
2018-02-26Add V3H Starter Kit boardVladimir Barinov11-7/+1301
This adds V3H Starter Kit board support
2018-02-26V3M: Support ES1.0 SoCVladimir Barinov2-18/+325
2018-02-26V3M VideoBoxMiniV2: set POCx-gpios instead POCx-gpioVladimir Barinov1-4/+4
It is already used for all POCx-gpios and not POCx-gpio. Both are functonal for 1 gpio used. This change just syncs with others.
2018-02-26V3M VidoeoBoxMiniV2: user proper compatibleVladimir Barinov1-1/+1
the "spidev" is prohibbited to use for binding
2018-02-26V3MSK: add PMICVladimir Barinov1-5/+36
This add DA9063 PMIC on V3MSK I2C0 bus
2018-02-26V3MSK and Condor have 2GB memoryVladimir Barinov1-2/+2
2018-02-26IMR: push rotation-scaling-enable flag upVladimir Barinov1-1/+1
The flag number 8 is already busy with another option, hence push RSE flag up
2018-02-26V3H CR7 Loader: add PACKAGE_ARCH optionVladimir Barinov1-0/+2
Add PACKAGE_ARCH option to build in machine directory
2018-02-26V3H: add CR7 LoaderVladimir Barinov2-0/+45
Add CR7 Loader for V3H ES1.0 (support only Condor board DRAM setup)
2018-02-26V3H: add arm-trusted-firmwareVladimir Barinov3-0/+2558
2018-02-26V3M/V3H: sysc workaround for power down, cpu clock fixupVladimir Barinov5-78/+460
This adds SYSC workaround for power domains power down sequence on V3M/V3H and add cpu clock fixup on V3H. Also add VisionIP nodes and fix VSP i/f on V3H
2018-02-26V3M VBM V2: deploy dtbVladimir Barinov1-0/+1
Deploy dtb file for V3M VideoBoxMini V2 board
2018-02-26V3M Eagle: add PMICVladimir Barinov2-4/+39
This adds PMIC devices (regulator,wdt,rtc) on Eagle
2018-02-26Adds RSE support for V3H IMRVladimir Barinov3-1/+331
This adds RSE support for V3H IMR
2018-02-26Add V3M based Video Box Mini V2 boardVladimir Barinov2-39/+126
This cleans up VideoBoxMini board and add VideoBoxMini V2 board
2018-02-26Add OV2775 cameraVladimir Barinov1-55/+2425
This adds OV2775 sensor connected to TI953 seriliazer
2018-02-26VideoBoxMini: fix POC sequence typosVladimir Barinov1-6/+6
This fixes POC sequence on following boards: - V3MSK + VideoBoxMini - ULCB + VideoBoxMini
2018-02-26V3M: build arm-trusted-firmwareVladimir Barinov3-0/+9
Set ATF to build by default on V3M
2018-02-26Fix merge conflictVladimir Barinov1-1/+1
Fix build fail
2018-02-26Add V3MZF targetVladimir Barinov7-0/+350
2018-02-26Add V3M ZF board support in ubootVladimir Barinov2-0/+475
2018-02-26V3H: enable RAVB 1000BaseT speedVladimir Barinov1-1/+15
NOTE: RAVB is not default on Condor board GETHER is default on Condor board
2018-02-26V3M SK: fix CPLD access in ubootVladimir Barinov1-3/+9
2018-02-26V3M: enable RAVB 1000BaseT speedVladimir Barinov1-5/+19
2018-02-26V3M EAGLE: enable cache in ubootVladimir Barinov1-2/+2
2018-02-26Fix Kingfisher regulatorVladimir Barinov2-54/+0
The patch 0035-* breaks regulators on KF board. As a result the Multichannal audio was broken
2018-02-26LVDS: move from poc-supply to poc-gpiosVladimir Barinov2-494/+163
Use gpiod instead of gpio regulator in LVDS drivers This is ruquired to remove patch: 0035-regulator-fixed-probe-after-i2c.patch The above patch breaks regulators support on Kingfisher board
2018-02-26LVDS: remove helper patches for vendor camerasVladimir Barinov4-1038/+0
Remove these helper patches since it is possible to adjust cameras feature in kernel command line now
2018-02-26LVDS: unify TI9X4 deserilalizers family, add V3MZF boardVladimir Barinov7-1674/+1705
1) unify TI9X4 deseializers (TI954, TI964) 2) add V3MZF board 3) shorten deserilziers name in Kconfig/Makefile 4) add camera sensor AR0220
2018-02-01VB2: add MCP251X driver for can2 and can3Andrey Gusakov1-0/+1
2018-02-01VB2: add rtc dts nodeAndrey Gusakov1-6/+10
2018-01-31uboot: add RCAR I2C definitionsVladimir Barinov1-0/+32
2018-01-31H3 ws2.0: fix ssi349 nameVladimir Barinov2-0/+29
This is tested on KF + H3 ws2.0
2018-01-31V3M/H: fix IMP resourcesVladimir Barinov2-21/+53
Fix IMP sizes/names/sysc Add new IMP blocks
2018-01-31V3M/H uboot: fix reset, Micrel phy reset, emmcVladimir Barinov5-82/+85
1) fix Eagle reset 2) add Condor Micrel PHY reset at startup 3) fix Eagle eMMC (expansion board with emmc 1.8V) 4) remove unused stuff
2018-01-28LVDS: add poc-delay dts fieldVladimir Barinov1-37/+71
1) add poc-delay field that introduces extra delay after apply POC-supply power. Default value is 50ms 2) add stability fixes for AP0101-AR014x cameras: read OTP_ID runtime (do not use cached value at kernel boot time, since it may read unstable/incorrectly)
2018-01-28Use POC-supply in VB, VB2 based boardVladimir Barinov1-214/+308
1) replace gpio-hog power with POC-supply regulator on VideoBox and VideoBox2 boards 2) remove sensor-delay filed form dts if it is 0 and if it is replaced with POC-supply
2018-01-25Condor: fix eMMC powerVladimir Barinov1-5/+16
Condor eMMC power is 1.8V by default. This sets pingroup POC voltage to 1.8V
2018-01-25V3H: Add GETHERVladimir Barinov5-162/+371
1) Add GETHER in uboot/kernel 2) Condor board: setup as default interface
2018-01-24SPI slave: fix WARN messageVladimir Barinov3-28/+1
This fixes warn message form spidev driver
2018-01-23V3M: fix broken build on V3M targetsVladimir Barinov2-7/+8
This fixes broken build on V3MSK and Eagle caused by uboot changes after adding V3H platform
2018-01-23[linux-renesas] add support MD and RAID devices into ulcb configRoman Meshkevich1-0/+3
2018-01-23OV490-OV10640: add module paramsVladimir Barinov1-31/+35
1) add dvp_order module parameter 2) add max_height, max_width params This will allow override default dts params using kernel command line: f.e.: " ov106xx.dvp_order=2" or " ov106xx.max_width=1280 ov106xx.max_height=966 max9286.gpio_resetb=4 max9286.active_low_resetb=1 max9286.fsync_period=3200000"
2018-01-23MSIOF: add SPIDEV functionVladimir Barinov11-6/+4348
1) add spidev function on MSIOF 2) set MSOIF1 master and MSIOF slave on V3MSK VideoBoxMini
2018-01-23Pakcages: remove ssh-server-openssh, add spidev_testVladimir Barinov3-2/+23
1) revert ssh-server-openssh isnce conflicts with dropbear 2) add spidev_test