| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit upgrades u-boot version corresponding to BSP v3.7.0 for
below fix:
- Fix R-Car M3 version display from Ver.1.1 to Ver.1.1/Ver.1.2.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds a WORKAROUND patch for the issue that mini SD partition
information cannot be read correctly.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit enables DEVFREQ configuration.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to v3.7.0 for following updates:
[Kernel]
- Change Linux version to v4.14.35 from v4.14.
- Add support ZG clock divider for R8A77990 (R-Car E3).
- Remove patch for Identifing R-Car M3 Ver.1.2 or later.
[Power Management]
- Fix "Using plain integer as NULL pointer" in rcar_ems_ctrl.c.
- Add AVS support for gsx_opp_table.
- Update SYSC power ON/OFF flow.
[Display driver]
- Fix procedure for extal and dotclkin selection for R-Car E3.
- Add shutdown callback function in platform_driver".
- Fix state flag in case of dual link mode for R-Car E3.
[Ethernet driver]
- Move reset-gpios property to EthernetAVB node for R-Car E3 Ebisu
board.
[I2C driver]
- Fix handling of the RESTART phase and STOP phase.
[MSIOF driver]
- Add 2 clock delay by R-Car H3 Ver.3.0 only specification.
[SD/MMC driver]
- Fix eMMC HS400 mode setting.
- Delete wait in tuning process.
[USB2.0 Function]
- Avoid wrong list handling in printer_write().
[USB2.0 Host driver]
- Avoid the problem of Suspend to RAM in case of connecting USB mouse by
removing following patches:
<commit ID:cad25bf1> phy: rcar-gen3-usb2: Add the interrupt disabled
in suspend
<commit ID:318b535> phy: rcar-gen3-usb2: Support System Suspend To RAM
[Video Capture driver]
- Fix IFMD table information for R8A77990 (R-Car E3).
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates recipes to clarify Linux Kernel version.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
From Yv3.7.0, there are 03 options to build u-boot/IPL for H3:
- For R-Car H3 SiP DDR 8GiB (2GiB x 4ch) [1]
- For R-Car H3 SiP DDR 4GiB (2GiB x 2ch) [2]
- For R-Car H3 SiP DDR 4GiB (1GiB x 4ch) [3]
This commit adds a variable into sample configurations to control the
build option:
- For [1]: H3_OPTION = "1" (default)
- For [2]: H3_OPTION = "2"
- For [3]: H3_OPTION = "0"
It also adds H3_OPTION = "0" for H3ULCB by default.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
meta-openembedded/meta-networking and meta-openembedded/meta-python
were removed to avoid build error for GENIVI environment.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linaro Gcc version to 7.2 for adapting to upstream.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates configurations to adapt to YP v2.4.2.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies gstreamer recipe for following updates:
[gst-omx]
- Support enable-crop option.
- Update default output allocation for VP9 decoder.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit fixes the typos in recipes.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipes to fix the issue missing header files in
sysroots-components.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades library versions as below:
libcmsbcm.so.1.6.0 upgrades to libcmsbcm.so.1.7.0
libcmsblc.so.1.6.0 upgrades to libcmsblc.so.1.7.0
libcmsdgc.so.1.6.0 upgrades to libcmsdgc.so.1.7.0
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Some of the context lines in patches were ignored, it can lead to
incorrectly applied patches.
This commit modifies "change-shell.patch" to fix following warning:
| Hunk #1 succeeded at 1 with fuzz 2.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit fixes the warning as below:
| update-rc.d: tmp/work/salvator_x-poky-linux/core-image-weston-sdk/1.0-r0/rootfs/etc/init.d/pvrinit: file does not exist
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM for new ADSP packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM for new CMS packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM for new OMX video packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of EthernetAVB components for following
changes:
- Fix setting both S bit and E bit of FU header.
- Fix to restart to sending packets when not in time for the interval.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of weston for following item:
[v4l2-renderer]
- Translate all rects in clip region for calculation opaque region.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of Memory Manager driver for following items:
- Update CMA memory mapping for R-Car E3.
- Disable IPMMU TLB cache function in selected SoC revision.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates IPL and Secure Monitor to Rev1.0.20 rev2 for
following changes:
[IPL]
- [H/W Restriction No.100] Disable TLB function on IPMMU-PV1 cache on
H3 Ver.2.0.
- Update H3 Ver.3.0 QoS setting rev.0.06.
- Fix the IPL cannot load images to 40-bit address space with eMMC when
D-Cache enables.
- Add processing to read MSTP status into BL2.
- Delete unnecessary register setting.
- Add the SWTCNT setting of E3.
- Change the unit of transfer size to 256 bytes for RPC, and improved
DMA transfer processing.
- Add DDR Memory Config log.
[Secure Monitor]
- Add processing to read MSTP status into BL31.
For optee_os, it updates reversion to Rev1.0.13 for following change:
- Add processing to read MSTP status into MFIS.
It deletes the option which enables Lossy area for E3.
It also supports build option for H3:
- For R-Car H3 SiP DDR 8GiB (2GiB x 4ch), specify "RCAR_DRAM_SPLIT=1"
- For R-Car H3 SiP DDR 4GiB (2GiB X 2ch), specify "RCAR_DRAM_SPLIT=2
RCAR_DRAM_CHANNEL=5"
- For R-Car H3 SiP DDR 4GiB (1GiB x 4ch), specify "RCAR_DRAM_SPLIT=1
RCAR_DRAM_LPDDR4_MEMCONF=0"
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot SRCREV to follow the latest version for
following updates:
- Fix XTAL clock for Salvator-XS board.
- Use packed structures for networking. As a result, “dcache off”
command works fine.
It also adds u-boot build options to support each H3 device trees
as below:
- For R-Car H3 SiP DDR 8GiB (2GiB x 4ch), specify RCAR_DRAM_MAP4_2.
- For R-Car H3 SiP DDR 4GiB (2GiB x 2ch), specify RCAR_DRAM_MAP2_2.
- For R-Car H3 SiP DDR 4GiB (1GiB x 4ch), specify RCAR_DRAM_MAP4_1.
In Yv3.7.0, we will support R-Car H3 SiP DDR 8GiB by default.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit applies the power control patches in R-Car H3 Ver.3.0.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to v3.6.2 for following updates:
[Kernel]
- "WARNING: possible circular locking dependency detected" occurs with
repeating reboot. However, it was false positive, and it was confirmed
that there was no problem.
- Identify R-Car M3 Ver.1.2 or later.
- Remove lossy descompress area from MMNGR node and reduce reserved area
for R-Car E3 Ebisu board.
[Power Management]
- Improve power domains always on implementation.
- Fix interrupts are not raised issue on R-Car E3.
- Update CAS source.
[Display driver]
- Add overlay layer size check.
- Fix possible crtcs for plane when using VSPDL.
[IPMMU driver]
- Add workaround for disabling uTLBs.
[MSIOF driver]
Add MSIOF module clock changing processing for R-Car Series,
3rd Generation.
[PCIe driver]
- Fix memory leak in of_pci_get_host_bridge_resources.
[Thermal driver]
- Use DIV_ROUND_CLOSEST correctly as its description.
[USB3.0 Host driver]
- Cannot Suspend to RAM when enabling USB3.0.
- Confirm recognition of USB3.0 memory through HUB for setting
/etc/udev/rules.d/99-usb.rules.
[Video Capture driver]
- Allocate a scratch buffer at stream start. Then use scratch buffer
and always run in continuous mode.
- Fix PHTW register flow below 250 mbps.
- Fix clock control flow so that the warning message
“MSTP status timeout” is not displayed and when UDS (scaling)
is executed at VIN0, a black screen does not come out.
- Fix streaming procedure when resuming.
[Audio driver]
- Playback or capture doesn’t resume after Suspend to RAM.
[USB2.0 Function]
- Kernel error occurs with rmmod of g_printer.
- The dd command error occurs with g_mass_storage.
[USB2.0 Host driver]
- When connecting USB mouse, “Bad mode in Error handler” may occur with
Suspend to RAM.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies information for the following updates:
- Remove meta-openembedded/meta-networking and
meta-openembedded/meta-python.
- Upgrade Linaro Gcc version to 7.2.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
meta-openembedded/meta-networking and meta-openembedded/meta-python were
no longer used, this commit removes their information in README.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates device tree names for H3.
There are 3 device trees as below:
- renesas/r8a7795-salvator-xs.dtb: for R-Car H3 SiP
DDR 4GiB (1GiB x 4ch)
- renesas/r8a7795-salvator-xs-2x2g.dtb: for R-Car H3 SiP
DDR 4GiB (2GiB x 2ch)
- renesas/r8a7795-salvator-xs-4x2g.dtb: for R-Car H3 SiP
DDR 8GiB (4GiB x 2ch)
In Yv3.7.0, we will support R-Car H3 SiP DDR 8GiB by default.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
We have a better solution for memory leak issue.
This reverts commit 4f9d2b579a600b4fd32f2a92b83378d488a82bff.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
of lacking GLES3/gl3ext.h"
Gstreamer source code have been updated.
This reverts commit 4f50fe1d6f208f535d663325288e34fce4f0c358.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates the tarball names in copyscripts for new graphic
packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM values for new ADSP packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM values for new CMS packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM for new OMX video packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit removes unused evaproprietary packages and their functions
to avoid confusion.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates year of copyright and fix comment typo.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit removes vp9dec_lib in H3ULCB and M3ULCB configuration.
It helps to reduce the possibility that user got mistake on
enabling VP9.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds sample configurations for E3 board (Ebisu).
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
In nativesdk-ncurses, they only add -L<sysroot>/${libdir}, not
-L<sysroot>/${base_libdir}.
So move base_libdir to libdir will help others find ncurses lib
Signed-off-by: Tan Nguyen <tan.nguyen.wh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
glmark2 fails to build in YP v2.4 environment with the following error:
| Checking for 'libpng12' : not found
| Checking for 'libpng15' : not found
| Checking for 'gbm' : not found
This commit modifies recipe to fix this issue.
It also applies a patch to avoid the following error:
| ../src/gl-state-egl.cpp: In member function 'bool GLStateEGL::gotValidDisplay()':
| ../src/gl-state-egl.cpp:420:41: error: 'EGL_PLATFORM_GBM_KHR' was not declared in this scope
| #define GLMARK2_NATIVE_EGL_DISPLAY_ENUM EGL_PLATFORM_GBM_KHR
| ^
| ../src/gl-state-egl.cpp:444:17: note: in expansion of macro 'GLMARK2_NATIVE_EGL_DISPLAY_ENUM'
| GLMARK2_NATIVE_EGL_DISPLAY_ENUM, native_display_, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| ../src/gl-state-egl.cpp:420:41: note: suggested alternative: 'EGL_PLATFORM_GBM_MESA'
| #define GLMARK2_NATIVE_EGL_DISPLAY_ENUM EGL_PLATFORM_GBM_KHR
| ^
| ../src/gl-state-egl.cpp:444:17: note: in expansion of macro 'GLMARK2_NATIVE_EGL_DISPLAY_ENUM'
| GLMARK2_NATIVE_EGL_DISPLAY_ENUM, native_display_, NULL);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
In systemd v234, systemd-logind may now be restarted without losing
state, it stores the file descriptors (fd) for devices it manages
in the system manager. [1]
In graphic and multimedia configuration, above feature causes memory
leak with the use case of restarting Weston:
| root@salvator-x:~# cat /proc/meminfo | grep Cma
| CmaTotal: 671744 kB
| CmaFree: 629788 kB
| root@salvator-x:~#
| root@salvator-x:~# systemctl restart weston
| root@salvator-x:~#
| root@salvator-x:~# cat /proc/meminfo | grep Cma
| CmaTotal: 671744 kB
| CmaFree: 599404 kB
Because the system continues allocating memory for the new session
during the previous device fds still open.
This commit avoids saving device fds into the system manager by
setting "FileDescriptorStoreMax=0" [2] in "systemd-logind.service".
[1] https://lists.freedesktop.org/archives/systemd-devel/2017-July/039308.html
[2] https://www.freedesktop.org/software/systemd/man/systemd.service.html#FileDescriptorStoreMax=
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds a python function to prevent build DTV feature with E3
due to E3 does not support SSP.
The following error will occur when trying enable DTV for E3:
| E3 (SoC: r8a77990) does not support SSP, please disable DTV feature in your local configuration
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates the condition to build vp9dec_lib with E3
(SoC r8a77990).
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
support E3
This commit updates SRCREV for the following contents:
[gst-omx]
- Limit b-frames on no-copy mode.
- Support send-eos option.
- Support b-frames and ref-frames options.
[gst-plugins-good]
- Correct handling for userptr mode.
- Support num-alloc-buffer option.
- Change method to decide number of buffers for v4l2src.
[gst-plugins-bad]
- Update copyright.
- Add a new property that suppress setting interlace flag.
- Check for GLES3/gl3ext.h existence.
It also adds gstvspfilter.conf to support E3 board.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit fixes a comment typo.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit removes an unused patch and updates SRCREV
for avb-applications.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV to apply following changes:
- Fix QAC MISRA C:2012 warnings.
- Disable TLB function on IPMMU caches on E3.
- To add E3 support.
- xxxxxx mmngr_lib update test.
- Update MMNGR revision to v1.3.
- Change the way of parsing reserved memory regions in DT.
- Do not parse reserved memory region for default CMA in DT twice.
- Update IPMMU(MMU) deinitialize sequence.
It also adds the configuration for E3.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates VSPM SRCREV for following fix:
[vspm_drv]
- Fix issue when up-scaling at UDS.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit fixes comment typos.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV for AVB Streaming, MSE and MCH driver
by following updates:
[AVB Streaming driver]
- Update version to v2.13.0.
- Cleanup checkpatch warnings.
[AVB MSE]
- Merge dev branch into rcar-gen3.
[AVB MCH]
- Add auto selection of avtp_clk_frq value.
- Cleanup variable set but not used.
- Cleanup symbol was not declared.
- Cleanup constant is so big it is type.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
Khang Nguyen
Takeshi Kihara
Thuy Tran
Tan Nguyen