summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-08-28Add V3MSK on KF V0Vladimir Barinov1-9/+39
2017-08-28Add AR0132 LVDS camera supportVladimir Barinov1-40/+935
2017-08-26Add V3M Eagle machineVladimir Barinov9-0/+341
2017-08-25LVDS: fix camera start-up (stability work)Vladimir Barinov1-12/+79
Some cameras with OV10640/OV490 are bad in h/w and does not match start up sequence: PWDN/RESETB that lead to OV10640 hang. This patch fixes that in s/w.
2017-08-21Fix delay if used external gpio for PoC powerVladimir Barinov1-5/+6
2017-08-20Add V4L2_CID_MIN_BUFFERS_FOR_CAPTURE controlVladimir Barinov1-10/+34
This is needed for gstreamer to exclude gstreamer hacking
2017-08-20LVDS: fix camera startupVladimir Barinov1-40/+54
This fixes race condition between camera firmware start and driver initialization.
2017-08-16Add V3MSK Kingfisher board supportVladimir Barinov1-2/+552
2017-08-16Typo fixesVladimir Barinov3-3/+3
2017-08-15KF: use ulcb-kf.dtsiVladimir Barinov1-5318/+2176
Use one dtsi file for both h3/m3ulcb kingfisher boards
2017-08-15revert gpio-max732x-set-gpio-ouput-low-at-initVladimir Barinov1-1/+0
This patch introduces bug
2017-08-15r8a7797: add V3MSK board, correct V3M Eagle dtsVladimir Barinov2-81/+326
2017-08-14r8a7797: fix csi2 node nameVladimir Barinov1-1/+1
2017-08-14Eagle r8a7797 support, adv7511 clock rate fixesVladimir Barinov3-194/+1002
1) support Eagle r8a7797 2) propagate max clock rate set for adv7511 via dts: Eagle and Kingfisher use ADV7511 KF rate 100Mhz Eagle rate 166Mhz
2017-08-11Gen3: disable autosuspend for SMSC usb hubsVladimir Barinov2-0/+52
Thisis a workaround for R-Car Gen3 XHCI
2017-08-11Add recipe for libmediactl-v4l2Vladimir Barinov2-1/+18
This is V4L2 media controller support library which is used by surroundview
2017-08-10Kingfisher: enable PCM audio between CPU and BT moduleAndrey Gusakov6-14/+237
Add dummy driver for wl18xx PCM. Update dtb's. Update pulseaudio config. Also add ofono-test.
2017-08-10KF: fix DU RGB flickering, remove SDR50/104Vladimir Barinov6-3/+201
1) fix DU RGB port flickeringby presclaing clock in VC5 2) limit clock for DU RGB in driver adv7511 to 100Mhz this is according to Gen3 manual limitation for this DU port 3) update README 4) remove SDR50/104 from onboard KF
2017-08-09sound: fixes and improvementsAndrey Gusakov4-101/+29
PulseAudio: use one config for all boards PulseAudio: fix config files installation ofono: install ofono for HSP and HFP functionality gstreamer: install pulseaudio stuff
2017-08-09Sound: ak4613: suppress warning during pulseaudio probeAndrey Gusakov2-0/+61
2017-08-09KF: ADV7511 edid fixes, i2c2 speed 400khz, hsusb ws2.0 enableVladimir Barinov3-20/+82
1) fix edid get via adv7511 2) increase i2c2 speed from 100 to 400khz sine #1 fixed 3) enable hsusb for H3 ws2.0
2017-08-07KF: Add SDR50/104 for SDHI3Vladimir Barinov1-1/+3
SDR50/104 needs to set explicitly.
2017-08-06LVDS: workaroundpatch is not needed anymoreVladimir Barinov2-29/+0
optional compilation for Cogent firmware is not needed anymore since driver supports both firmware: Cogent and Vendor
2017-08-06Gen3: LVDS: fix RDCAM21/24 firmwareVladimir Barinov1-1/+7
1) This fixes/allows to use both Cogent and vendor firmware 2) this fixes dark envionment show: only for vendor f/w since EMB line is enabled but not showed in frame. Sensor EMB line is used in ISP.
2017-08-02Kingfisher: BT: use proper way to get shutdown gpioAndrey Gusakov3-9/+71
2017-08-02ADAS boards: fix ssi012(3)9 pinmuxex on H3 and M3Andrey Gusakov1-3/+3
H3 has ssi01239_ctrl group M3 has ssi0129_ctrl group
2017-08-01Kingfisher: install pulseaudio-bluetooth.conf in proper placeAndrey Gusakov1-1/+1
2017-08-01Kingfisher: fixes for bluetooth audioAndrey Gusakov4-6/+28
2017-08-01Fix build error: kf-v1 does not present anymoreVladimir Barinov1-3/+0
2017-07-31VIN: fix S_SELECTION (S_CROP IOCTL)Vladimir Barinov2-0/+68
2017-07-31Image: install kernel-modulesAndrey Gusakov1-0/+1
2017-07-29ADAS boards: separate V0/V1 and V3 (default) KF boardsVladimir Barinov1-1438/+6627
2017-07-29LVDS cameras: fix typoVladimir Barinov1-2/+2
2017-07-28Kingfisher: WiFi: use more recent FWAndrey Gusakov1-0/+63
2017-07-28Kingfisher: BT: fix RTS/CTS and firmware pathAndrey Gusakov2-11/+11
2017-07-28Kingfisher V3: update m-channel sound support (fix)Andrey Gusakov1-1/+0
2017-07-28Kingfisher V3: update m-channel sound supportAndrey Gusakov3-315/+45
On V3 m-channel codec is moved to SSI34, so only minor update of sound driver is necessary.
2017-07-27LVDS: optional compilation for Cogent firmwareVladimir Barinov3-22/+130
This allows to use Cogent generated frimware for LVDS cameras (ov490+0v10640).
2017-07-27Kingfisher V3 updateVladimir Barinov2-0/+108
- correct SDHI3 for uhs mode enabled - add regulators to pcie-rcar - enable rpi camera
2017-07-27TTA-RDRIVE: remove unused patchVladimir Barinov1-1314/+0
2017-07-25Kingfisher: add BT initialization tool/serviceAndrey Gusakov6-0/+278
2017-07-25Kingfisher: fix radio init scriptAndrey Gusakov1-6/+6
2017-07-25Kingfisher: add pulseaudioAndrey Gusakov10-0/+560
Set kingfisher in DISTRO_FEATURES to enable multichannel audio
2017-07-21arm-trusted-firmware: deploy bin filesVladimir Barinov1-0/+5
2017-07-17arm-trusted-firmware: add nonsecure hyperflash accessVladimir Barinov3-50/+86
this fixes non-secure hyperflash access on ws2.0
2017-07-15lvds/VB/KF, cma memoryVladimir Barinov5-67/+271
- KF: set max9286 i2c address to 0x2c - disable eMMC on r8a7795-es1 - max7325: initialize pins to output-low - enlarge cma memory region on ulcb
2017-07-14Kingfisher: Fix BT speedVladimir Barinov3-21/+5
- enable SCI DMA in kernel config - Kingfisher: enable 3,3M baud rate
2017-07-14ov490 switch to vendor's firmware, OV495 OTP IDVladimir Barinov3-87/+82
1) This adds default RDCAM21/RDCAM24 firmware: /usr/share/factory/rcarm21.rdcam24.1280x1080@30.bin If firmware flashed with Cogent samples then it is possible to rollback using script: /usr/share/factory/rdcam21.rdcam24.1280x1080@30.bin ov495: change YUYV -> UYVY ti964/ti954: use FSIN reference clock from camera port0 2) Add ov495 OTP ID
2017-07-14add ov5642, fix DVP in VINVladimir Barinov6-20/+2426
- add ov5642 driver - fix parallel interfacein VIN - enable CMOS cameras on Kingfisher
2017-07-14Add EDT FT5X06 driverVladimir Barinov1-0/+1