summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-12-05Bluetooth: fix PCM channel of WL18xxAndrey Gusakov3-3/+4
2017-12-05Release ADAS boards in BSP2.23.1Vladimir Barinov9-382/+199
2017-11-29LVDS OTP work if OTP memory emptyVladimir Barinov3-27/+68
Add OV10640 OTP memory BANK#1 flashing script If BNAK#0 isempty then fall into BANK#1 reading in kernel driver. Also add tool for flashing BANk#1 BANK#1 is customer area
2017-11-28Add missed patch during LVDS stability commitVladimir Barinov1-0/+53
2017-11-28Add IMPVladimir Barinov18-0/+2344
2017-11-28Kingfisher: bluetooth fixesAndrey Gusakov6-1/+38
Add proper dbus configs Enable bluetooth on startup
2017-11-26LVDS stability updateVladimir Barinov3-192/+405
1) use POC regulators in driver and power cameras one after one 2) set sensors reset during POC channels setup 3) fix wizard setup for ov490 based caemras by waiting it's firmware start all internal apps 4) support AR0132 with MAX9286 5) due to stability fixed then increase i2c bus speed on Videobox Mini 6) support MAX96705 serializer with MAX9286
2017-11-22Fix glog compilation when gflags or gmock are installed on the host machinePetr Nechaev2-0/+49
Binaries gflags-config and gmock-config are not generated during cross-compilation so use pkg-config instead.
2017-11-22Generate r8a7797-v3msk-view.dtb during kernel buildPetr Nechaev1-0/+1
2017-11-21V3M View board supportVladimir Barinov1-6/+314
2017-11-20R8A7797: enable IMR resourses in kernelVladimir Barinov2-13/+49
2017-11-20Fix CANFD kernel config for V3M boardsVladimir Barinov2-2/+2
2017-11-19Unit test for VIN-IMR-DRM camera capture pipeVladimir Barinov4-3/+29
2017-11-19Rename sv packagegroup recipes and split themVladimir Barinov5-18/+25
2017-11-17ov10640: fix flip positionVladimir Barinov1-2/+7
2017-11-17V3M: fix QSPI access and tune MMC clockVladimir Barinov2-38/+51
2017-11-17V3M: add V3MSK board in ubootVladimir Barinov3-1/+815
Support eMMC, QSPI, Ether, reset, CPLD, console
2017-11-17V3M IMR/DRMVladimir Barinov11-2/+1526
- Support IMR/VSP/DRM for V3M - Add packeges to use IMR-DRM demo
2017-11-14V3M: support MSIOF on KF V0Vladimir Barinov2-14/+69
1) support MSIOF2/3/4 on Kingfisher V0 board 2) remove unused pins on V3MSK from dts file
2017-11-10Radio RST gpio typo fixVladimir Barinov1-0/+0
It should be offset 7 and not 8 in si_init script
2017-11-09Update si_init script to work on H3/M3 ULCBVladimir Barinov1-0/+0
H3 and M3 have differnt gpiochip base number for PCA9539@75 gpio expander. Update si_init script to work for both H3ULCB and M3ULCB
2017-11-09Videobox Mini supportVladimir Barinov2-3455/+2390
1) V3MSK VideoBox Mini support 2) H3ULCB (es1.x, es2.0) Videobox Mini support 3) Optimize Videobox dts files
2017-11-07V3M: enable MMNGRVladimir Barinov1-2/+2
2017-11-07Fix pinmux conflict on V3MSKVladimir Barinov1-11/+11
CANFD0/1 are enabled both now
2017-11-07Replace pcm creation fix with upstream varianVladimir Barinov3-41/+175
2017-11-05V3MSK boards updateVladimir Barinov2-5/+17
- remove CANFD0 since conflicts with HDMI on pinmux - enable i2c3 on kf - deploy v3msk-vb
2017-11-03R8A7797: kernel updatesVladimir Barinov2-106/+647
- add CANFD - add V3M videobox board - add CANFD to V3M KF - add eMMC to V3MSK based boards
2017-10-31Update radio scirptsVladimir Barinov4-31/+29
Add radio scripts: si_fm si_scan si_preset
2017-10-30Fix incorrect radio reset gpioVladimir Barinov1-6/+6
this fixes handling Radio_RST
2017-10-27MOST: add scripts used for testingVladimir Barinov3-0/+23
Add MOST card setup scripts used for testing
2017-10-27MOST updateVladimir Barinov6-30/+144
1) fix MOST soundcard add during setup 2) optionally add MOST to dtsi via KF_ENABLE_MOST flag in local.conf 3) optionally add SD3 to dtsi via KF_ENABLE_SD3 flag in local.conf 4) add MOST options to kernel config
2017-10-17disable BT in pulseaudio since it is brokenVladimir Barinov1-1/+1
New rcar sound driver constraints break BT (disable it temporary to have other soundcards funtional, since this one crash pulseaudio daemon)
2017-10-17Fix Mulitaudio (TDM mode) playback in 2.23Vladimir Barinov1-3/+49
2017-10-17enable pulseaudio daemon at first bootVladimir Barinov1-0/+2
It is used sysvinit to enable/disable pulseaudio daemon with sustemd the sysvinit services is not installed during build. Force install.
2017-09-27FIX ssi pingroup used for PCM3168AVladimir Barinov1-1/+1
Since 2.23 it is renamed: ssi34_ctrl -> ssi349_ctrl
2017-09-27revert snd card name to wl18xxVladimir Barinov1-1/+1
it isokay tohave sound card name as wl18xx since it is not platform driver name This is convenient for use already setup pulseudio config file that uses wl18xx name
2017-09-27Name wl18xx dumy pcm card as wl18xx-codecVladimir Barinov2-2/+2
This fixes wifi since it's platform driver uses the same name asoc driver loader in kernel but wifi as a module hence wifi is rejected
2017-09-25Add MOSTVladimir Barinov10-1/+762
2017-09-20Use OpenCV 2.4 by default (necessary for public release SV)Grigory Kletsko1-1/+1
2017-09-20Merge branch 'v2.23.0' of git://github.com/CogentEmbedded/meta-rcar into v2.23.0Grigory Kletsko1-1/+0
2017-09-20Build fail fixVladimir Barinov1-1/+0
opencv-3.2 and opencv-samples-2.4 conflict while installing opencv-samples. pencv-samples are already inherited by opencv-3.2.bb
2017-09-20Update supported boards infoVladimir Barinov1-1/+3
2017-09-20Add gflags recipe, necessray for opencv 3.2Grigory Kletsko1-0/+20
2017-09-20Build offline patchesVladimir Barinov3-0/+167
This patches will alow to build with BB_NO_NETWORK=1 only from download cache
2017-09-20switch to 2.23.0 bspVladimir Barinov14-1289/+27
2017-09-18[CV] Add gflags recipe, necessray for opencv 3.2Grigory Kletsko1-0/+20
2017-09-18Add opencv 3.2 and use it by defaultGrigory Kletsko9-8/+288
2017-09-18Merge branch 'v2.19.0' of git://github.com/CogentEmbedded/meta-rcar into v2.19.0Grigory Kletsko17-113/+1848
2017-09-17Build offline patchesVladimir Barinov3-0/+167
This patches will alow to build with BB_NO_NETWORK=1 only from download cache
2017-09-14Initial commit for ADAS boards support in 2.23.0Vladimir Barinov208-0/+62060