Age | Commit message (Collapse) | Author | Files | Lines |
|
This commit modifies recipe to fix this issue by following Poky
commit.
Title: run-postinsts: do not reload daemon configuration
Auther: Max Krummenacher <max.oss.09@gmail.com>
Commit: 24a4b7114bf937ffb38b7696e75cf6ea917026a7
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to fix this issue by following Poky
commit.
Title: opkg-configure: do not reload daemon configuration
Auther: Max Krummenacher <max.oss.09@gmail.com>
Commit: fd266b1b66844d660ebd8e33fe22c08c8ddaccbf
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to fix this issue by following Poky
commit.
Title: dpkg-configure: do not reload daemon configuration
Auther: Max Krummenacher <max.oss.09@gmail.com>
Commit: b1b94376d15ea18e55f724f1d5256298e1728222
In case a systemd service disables itself while init is still in its
boot sequence the reloading of the service files can be problematic.
In that case: It seems that systemd looses the state of .device units,
and some services depend on such units (namely serial consoles such as
serial-getty@ttymxc0.service). As a result no getty is spawned on the
affected serial tty.
After a power-cycle the second boot (which does not disable services)
succeeds.
The following sequence shows this problem:
| Jan 09 16:36:28 apalis-t30 systemctl[162]: Removed /etc/systemd/system/sysinit.target.wants/run-postinsts.service.
| Jan 09 16:36:28 apalis-t30 systemd[1]: Reloading.
| ...
| And then the failing one:
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start timed out.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Timed out waiting for device dev-ttyS0.device.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Dependency failed for Serial Getty on ttyS0.
| Feb 22 15:33:15 apalis-t30 systemd[1]: serial-getty@ttyS0.service: Job serial-getty@ttyS0.service/start failed with result 'dependency'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: dev-ttyS0.device: Job dev-ttyS0.device/start failed with result 'timeout'.
| Feb 22 15:33:15 apalis-t30 systemd[1]: Reached target Login Prompts.
(the time has been updated between this two events, but that does not
influence the issue)
Using --no-reload in the service file avoids the "Reloading." message
above and seems to not cause such issues anymore.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit makes backporting changes from upstream systemd to fix
timeout dev-ttySN.device by following:
[systemd]
- Set journal RuntimeMaxSize to 64M as default [1]
[systemd-serialgetty]
- Use the default RestartSec [2]
[1] From Poky rev: d41968d8a8bd572b2892762f7092868950465014
[2] From Systemd rev: 4bf04322b8b7ecca4f3d65cfc642d0ac16356129
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies ccache SRC_URI to fix issue as below:
| WARNING: ccache-3.2.4-r0 do_fetch: Failed to fetch
| URL git://git.samba.org/ccache.git, attempting MIRRORS if available
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to remove redundant kernel-module-vspmif.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies copyscript to skip Video and Audio packages
availability check for DTV/DVD pkgs.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SOC_FAMILY for M3N to build with supported
environments (MMP, GFX, BSP).
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to support VSPBS module in R-Car Gen3.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates vsp2drv SRCREV to add M3N support for component
in WPF.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds a patch file for M3N support.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MMNGR driver SRCREV to add uTLB setting for M3N
when enabling IPMMU.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to add M3N support.
It adds gstvspfilter.conf for M3N board.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates recipe to add M3N into COMPATIBLE_MACHINE.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates recipe to add M3N into COMPATIBLE_MACHINE.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies graphic recipes to support M3N GFX version.
It also updates copyscript to support copying M3N GFX packages.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates QoS driver SRCREV for following fixes:
[qos_lib]
- Fix return val.
[qos_drv]
- Support M3N Ver1.0 (or later tentatively).
- And support later versions of the others (H3/M3/D3) tentatively.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies Linux BSP recipes to add more patches to support
ICCOM module.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates IPL components versions as below:
- Update IPL and Secure Monitor Rev1.0.17 rev2.
- Update optee_os Rev1.0.10.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot according to Linux BSP v3.5.9 for
supporting R-Car M3N Ver.1.0 and updating following items:
- Add missing IPSR18 bits to R8A7795 PFC.
- Fix unnecessary write "bus_width=1" for SDHI.
U-boot config for M3N is r8a77965_salvator-x_defconfig.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Linux BSP has been upgraded for supporting R-Car M3N Ver.1.0 and
updating following items:
[Kernel]
- Add R-Car M3N Ver.1.0 support.
- Fix MSIOF3 and VI5_DATA13 pinmux settings.
[Audio driver]
- Don't check SSISR::DIRQ when Capture.
- Call dummy write for PW_MGMT1/3 with AK4613 when Playback.
- TDM 6ch needs 8ch clock for hw refine.
- Fix pcm-creation regression.
[Display driver]
- Fix race condition when disabling planes at CRTC stop and
add reference counting to drm_atomic_state.
- Fix register parameters passed to HDMI.
- Unconditionally call prepare_fb and remove
drm_atomic_helper_framebuffer_changed.
[DMA Engine driver]
- Fixup descriptor pointer for descriptor mode and use TCRB
instead of TCR for residue.
[Ethernet driver]
- Fix condition of phy reset.
[I2C driver]
- Fix I2C DMA reception by adding reset.
- Fix I2C DMA transmission by setting sequence.
- Fix DMA Callback processing of I2C dma mode.
- Fix handling of the STOP phase.
[MFISLock driver]
- Revert and add support for R-Car Gen3 Hardware Spinlock again.
[SD/MMC driver]
- Add identification of TAP and clock settings of HS400.
- Fix HS400 mode selection process.
- Fix SCC error check condition.
[USB2.0 Function]
- Avoid spinlock recursion.
[USB3.0 Function]
- Fix for no-data control transfer and fix Pn_RAMMAP.Pn_MPKT value.
- Fix return value of usb3_write_pipe().
- The maximum PIPEs change from 30 to 5 except PIPE0 and EP0 by H/W
specification’s change. H/W specification is fixed because it has
description mistakes.
[Video Capture driver]
- Remove VnMC setting when setting VnCSI_IFMD.
- Fix PHTW register parameter for mbps.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds building instructions with Linaro GCC for M3N board.
It also adds meta-linaro/meta-optee as a necessary layer
to build Renesas BSP with Linaro GCC.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds information for the new R-Car Gen3 LSI M3N.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates recipes to support for R-Car M3N board
(SoC: R8A77965).
The support for M3N by following items:
- machine: Add support for M3N with tuning file for cortex-a57.
- linux-renesas: Upgrade Linux BSP to v3.5.9.
- u-boot: Add support for R-Car M3N.
- IPL: Update SRCREV to follow the latest version.
- README: Add M3N information.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipes to define 3 packagegroups for graphic.
There are 3 type packagegroups which are provided into IMAGE_INSTALL:
- packagegroup-wayland-community: contains wayland/weston/alsa/libdrm
components.
- packagegroup-graphics-renesas-proprietary: contains Renesas GFX are
kernel-module-gles and gles-user-module.
- packagegroup-graphics-renesas-wayland: contains Renesas Wayland
components: libgbm, libgbm-dev, wayland-kms.
This patch also removes the definition for 32bit packages,
because 32bit env has been stopped supporting.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds libegl recipe which provides build dependencies on
virtual/egl.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
The packages tarball should not be added to git management.
This commit adds .gitignore for *.tar.bz2 and *.tar.gz packages.
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
(cherry picked from commit 21cddeb0cf9bc284801f09451ec9023b74a0b713)
|
|
This commit modifies recipes to use RENESAS_DATADIR variable
for /usr/local directory instead of hard coding.
This commit comes from AGL patch.
Bug-AGL: SPEC-533
Change-Id: I865ea809c3c59ba136027fc8b99628df20c16275
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
(cherry picked from commit 9598336fa2b4a4237255cdd866350eb7c03fdd81)
|
|
Board configs should append to previously set IMAGE_FSTYPES
instead of overriding it.
Change-Id: If5101784f574a96185351e96b7c0cbd120fd90dc
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
(cherry picked from commit b4c458d529bfad0bd85c282912d3a237c8a3ebfb)
|
|
This commit updates lib version in cms-user-module recipe and
md5sum in copyscript corresponding to CMS v1.0.0.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
New ADSP packages are updated Interface/Framework to
modify some comments.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates md5sum values for Audio packages corresponding
to final release.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit changes md5sum values corresponding to
Video codec final release (Ver.3.0.10).
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates EthernetAVB driver for following changes.
[MSE Core]
- Fix missing initialization of crf_index_network at mse_close.
- Fix to disable MPEG2-TS PCR adjustment when no PCR exist in stream.
- Fix missing parameter checking in MCH/PTP API.
- Fix the timer interrupt occurrence at an unintended timing.
- Fix the wrong feedback to clock source correction settings.
[MCH Core]
- Fix missing set error code when mch_config is invalid.
[MSE V4L2]
- Fix illegal memory access by releasing buffer being processed.
- Fix wrong log message.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies libalacdla-l SRCREV to update year of Copyright
and Software IP version.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates libflacdla-l for some minor fixes,
changes source code revision and year of Copyright.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates gstreamer plugins to v1.0.0 for below changes:
gst-omx
- Improve seek function.
- Improve reconfigure sequence.
- Fix some log messages and coding style.
All components of gstreamer are updated to fix memory leak.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Gstreamer recipes bbappend should not overwrite SRC_URI.
This commit modifies recipes to replace SRC_URI softly
to make them easier to maintain.
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
(cherry picked from commit 3bb303359436660de0711f4e877926a1923e94fc)
|
|
This commit updates vsp2drv to fix YVU422M, YVU420M, YVU444M formats.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
VSPM driver is updated to improve performance of VSPB.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MMNGR and MMNGRBUF drivers and libraries SRCREV
for below changes:
- Update version to v1.0.
- Improve coding style.
- Fix the condition checking in create_l1_pgtable() in driver.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies libgbm SRCREV to include some updates
for backend_kms:
- Remove unused variables.
- Fix warnings according to static code analysis tool.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates wayland-kms SRCREV for below changes:
- Fix static code analysis tool warnings.
- Change wl_kms structure instance name.
- Uninitialize resources for kms authentication.
- Fix -Wparenthese and unused variable compiling warnings.
- Link libwayland-client before libwayland-server.
- Measures of problem that EGL application program cannot be started
on wayland-backend (Weston is multiple started).
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
weston/v4l2-renderer doesn't have dependency with media-ctl.
Hence, this commit removes media-ctl from weston RDEPENDS list and
updates weston SRCREV for below fixes:
[v4l2-renderer]
- Handle failed to prepare composition.
- Fix according to static code analysis tool.
- Change media device information output format.
- Check number of planes at importing dmabuf.
[vsp2-renderer]
- Fix according to static code analysis tool.
[weston]
- Output is destroyed by memory leak (HDMI cable is pulled out).
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit renames mesa bbappend to be able to compatible with
different mesa versions.
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
(cherry picked from commit 4849eff67419793fd79894fe0002278d09f91e07)
|
|
eglmesaext.h is installed because GFX needs it.
GFX is updated and this header is not used anymore.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
New GFX pkg does not need header from mesa,
because it already has the necessary header (EGL/eglwaylandext.h)
in the pkg itself.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates md5sum values for ICCOM pkgs
corresponding to ICCOM v1.0.1.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates IPL components versions as below:
- Update IPL and Secure Monitor Rev1.0.16 rev4.
- Update optee_os to Rev1.0.9 rev2.
- Update optee_linuxdriver to Rev1.0.7 rev2.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot according to Linux BSP v3.5.6
for below fixes:
- Fix u-boot reset for ULCB.
- The SMSTPCR value is illegal immediately
before the start of the kernel.
- The following fatls command execution of usb start/stop
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|