aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-11-24rcar-gen3: README.linaro: Add information for M3N and M3ULCBThuy Tran1-10/+22
This commit adds building instructions with Linaro GCC for M3N board. It also adds meta-linaro/meta-optee as a necessary layer to build Renesas BSP with Linaro GCC. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-11-24rcar-gen3: README: Add information for M3NThuy Tran2-1/+3
This commit adds information for the new R-Car Gen3 LSI M3N. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-11-24rcar-gen3: machine: Add support for M3N boardThuy Tran2-2/+20
This commit updates recipes to support for R-Car M3N board (SoC: R8A77965). The support for M3N by following items: - machine: Add support for M3N with tuning file for cortex-a57. - linux-renesas: Upgrade Linux BSP to v3.5.9. - u-boot: Add support for R-Car M3N. - IPL: Update SRCREV to follow the latest version. - README: Add M3N information. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: packagegroup: Create new packagegroups for GFX packagesRenesas-Yocto-v2.23.0Thao Nguyen2-30/+40
This commit modifies recipes to define 3 packagegroups for graphic. There are 3 type packagegroups which are provided into IMAGE_INSTALL: - packagegroup-wayland-community: contains wayland/weston/alsa/libdrm components. - packagegroup-graphics-renesas-proprietary: contains Renesas GFX are kernel-module-gles and gles-user-module. - packagegroup-graphics-renesas-wayland: contains Renesas Wayland components: libgbm, libgbm-dev, wayland-kms. This patch also removes the definition for 32bit packages, because 32bit env has been stopped supporting. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: libegl: Create new recipe to fix build dependency issuesThao Nguyen9-9/+26
This commit adds libegl recipe which provides build dependencies on virtual/egl. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: Add .gitignoreRonan Le Martret1-0/+2
The packages tarball should not be added to git management. This commit adds .gitignore for *.tar.bz2 and *.tar.gz packages. Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit 21cddeb0cf9bc284801f09451ec9023b74a0b713)
2017-08-25rcar-gen3: Use flexible coding style for Renesas datadirRonan Le Martret24-56/+72
This commit modifies recipes to use RENESAS_DATADIR variable for /usr/local directory instead of hard coding. This commit comes from AGL patch. Bug-AGL: SPEC-533 Change-Id: I865ea809c3c59ba136027fc8b99628df20c16275 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit 9598336fa2b4a4237255cdd866350eb7c03fdd81)
2017-08-25rcar-gen3: Correct coding style of IMAGE_FSTYPESAnton Gerasimov3-3/+3
Board configs should append to previously set IMAGE_FSTYPES instead of overriding it. Change-Id: If5101784f574a96185351e96b7c0cbd120fd90dc Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh> Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit b4c458d529bfad0bd85c282912d3a237c8a3ebfb)
2017-08-25rcar-gen3: cms-user-module: Update MD5SUM and lib version for new CMS pkgsThao Nguyen2-12/+12
This commit updates lib version in cms-user-module recipe and md5sum in copyscript corresponding to CMS v1.0.0. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: copyscript: Update MD5SUM for ADSP packagesThao Nguyen1-3/+3
New ADSP packages are updated Interface/Framework to modify some comments. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: copyscript: Update MD5SUM for Audio packagesThao Nguyen1-13/+13
This commit updates md5sum values for Audio packages corresponding to final release. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: copyscript: Update MD5SUM for Video packagesThao Nguyen1-13/+13
This commit changes md5sum values corresponding to Video codec final release (Ver.3.0.10). Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: EthernetAVB: Update SRCREV to follow the latest versionThao Nguyen2-2/+2
This commit updates EthernetAVB driver for following changes. [MSE Core] - Fix missing initialization of crf_index_network at mse_close. - Fix to disable MPEG2-TS PCR adjustment when no PCR exist in stream. - Fix missing parameter checking in MCH/PTP API. - Fix the timer interrupt occurrence at an unintended timing. - Fix the wrong feedback to clock source correction settings. [MCH Core] - Fix missing set error code when mch_config is invalid. [MSE V4L2] - Fix illegal memory access by releasing buffer being processed. - Fix wrong log message. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: libalacdla-l: Update SRCREV to follow the latest versionThao Nguyen1-1/+1
This commit modifies libalacdla-l SRCREV to update year of Copyright and Software IP version. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: libflacdla-l: Update SRCREV to follow the latest versionThao Nguyen1-1/+1
This commit updates libflacdla-l for some minor fixes, changes source code revision and year of Copyright. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: gstreamer: Update SRCREV to follow the latest versionThao Nguyen4-4/+4
This commit updates gstreamer plugins to v1.0.0 for below changes: gst-omx - Improve seek function. - Improve reconfigure sequence. - Fix some log messages and coding style. All components of gstreamer are updated to fix memory leak. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: gstreamer: Clean gstreamer recipes to facilitate maintenanceRonan Le Martret3-13/+7
Gstreamer recipes bbappend should not overwrite SRC_URI. This commit modifies recipes to replace SRC_URI softly to make them easier to maintain. Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit 3bb303359436660de0711f4e877926a1923e94fc)
2017-08-25rcar-gen3: kernel-module-vsp2driver: Update SRCREV to follow the latest versionThao Nguyen1-1/+1
This commit updates vsp2drv to fix YVU422M, YVU420M, YVU444M formats. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: kernel-module-vspm: Update SRCREV to follow latest versionThao Nguyen1-1/+1
VSPM driver is updated to improve performance of VSPB. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: MMNGR: Update SRCREV for driver to follow latest versionThao Nguyen2-2/+2
This commit updates MMNGR and MMNGRBUF drivers and libraries SRCREV for below changes: - Update version to v1.0. - Improve coding style. - Fix the condition checking in create_l1_pgtable() in driver. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: libgbm: Update SRCREV to follow the latest versionThao Nguyen1-1/+1
This commit modifies libgbm SRCREV to include some updates for backend_kms: - Remove unused variables. - Fix warnings according to static code analysis tool. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: wayland-kms: Update SRCREV to follow the latest versionThao Nguyen1-1/+1
This commit updates wayland-kms SRCREV for below changes: - Fix static code analysis tool warnings. - Change wl_kms structure instance name. - Uninitialize resources for kms authentication. - Fix -Wparenthese and unused variable compiling warnings. - Link libwayland-client before libwayland-server. - Measures of problem that EGL application program cannot be started on wayland-backend (Weston is multiple started). Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: weston: Update recipe and SRCREV to follow the latest versionThao Nguyen2-2/+1
weston/v4l2-renderer doesn't have dependency with media-ctl. Hence, this commit removes media-ctl from weston RDEPENDS list and updates weston SRCREV for below fixes: [v4l2-renderer] - Handle failed to prepare composition. - Fix according to static code analysis tool. - Change media device information output format. - Check number of planes at importing dmabuf. [vsp2-renderer] - Fix according to static code analysis tool. [weston] - Output is destroyed by memory leak (HDMI cable is pulled out). Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: mesa: Rename mesa bbappendRonan Le Martret1-0/+0
This commit renames mesa bbappend to be able to compatible with different mesa versions. Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit 4849eff67419793fd79894fe0002278d09f91e07)
2017-08-25rcar-gen3: mesa: Remove installation of eglmesaext.hThao Nguyen1-3/+0
eglmesaext.h is installed because GFX needs it. GFX is updated and this header is not used anymore. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: gles-user-module: Remove patch to include header from mesaThao Nguyen2-26/+0
New GFX pkg does not need header from mesa, because it already has the necessary header (EGL/eglwaylandext.h) in the pkg itself. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: copyscript: Update MD5SUM for ICCOM packagesThao Nguyen1-1/+1
This commit updates md5sum values for ICCOM pkgs corresponding to ICCOM v1.0.1. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: IPL: Update SRCREV to follow the latest versionThao Nguyen3-4/+4
This commit updates IPL components versions as below: - Update IPL and Secure Monitor Rev1.0.16 rev4. - Update optee_os to Rev1.0.9 rev2. - Update optee_linuxdriver to Rev1.0.7 rev2. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: u-boot: Upgrade version according to Linux BSP to v3.5.6Thao Nguyen1-2/+2
This commit updates u-boot according to Linux BSP v3.5.6 for below fixes: - Fix u-boot reset for ULCB. - The SMSTPCR value is illegal immediately before the start of the kernel. - The following fatls command execution of usb start/stop Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: linux-renesas: linux-renesas: Upgrade Linux BSP from v3.5.5 to v3.5.8Thao Nguyen2-4/+4
Linux BSP has been upgraded for following changes: v3.5.8 [Audio driver] - Fix S2R issue. [DMA Engine driver] - Fix S2R issue. [USB2.0 Function] - Fix lock variable no init [USB Host 3.0] - Fix support for R-Car Gen3 USB 3.0 PHY. v3.5.7 [DMA Engine driver] - Fix the missing spin_unlock_irqrestore. [Display driver] - Fix unload procedure for vsp1. v3.5.6 [Kernel core] - Add next-level-cache property to CA53. - Add 12288000 for sound ADG or fix descending order of sound clock frequency to device tree. - Fix the audio pingroup name mismatch between sh-pfc driver and dts to device tree. [Power Management] - Change the reading AVS value method. - AVS7 opp table to device tree. - The resume function for SYSC driver and always turn on all power domains except CPU and GPU. - Change sequence for judgement using fixed values or Fuse values. [Audio driver] - There are sampling rate patterns that can not be converted by combination of audio clock and AK4613. It was confirmed this is a board specifications. However, they can be converted via alsalib. - Control kctrl items acceptance anytime/runtime. - SSI PIO adjust to 24bit mode. - Unsupport 64kHz sampling rate and more with AK4613 on Salvator-X/XS board. [Display driver] - Setup planes before enabling CRTC to avoid flicker. - Use DRM core's atomic commit helper. - Fix display list put for header mode. - Repair vblank for DRM page flips using the VSP1. - Wait for flip completion instead of vblank in commit tail. - Fix completed check in write back sequence. - Fix display starting procedure and DPLL clock divider judgement. [PTP Clock driver] - Fix interrupt cause bit overwrite in ravb_ptp_interrupt. - Fix result value overwrite by a return value of ravb_ptp_interrupt(). - Fix inconsistent lock state at enabling tx timestamp. [SATA driver] - Fix blk_get_backing_dev_info() crash using bdev->bd_queue, so kernel panic can be avoided in case of high load average. [DMA Engine driver] - Fix invalid context of sleeping function. - Fix inconsistent lock reported by PROVE_LOCKING. [SD/MMC] - Add SDHI-SEQUENCER support. This is Workaround for SDHI-DMAC restriction of R-Car H3 Ver.1.x and R-Car M3 Ver.1.0. - Wait for CBSY instead of SCLKDIVEN. - Disable msleep() at start/stop of SD clock. - Discard obsolete SDIO irqs before enabling irqs. - Relax checking for switch errors after HS200 switch. - Replace msleep() of 20ms or less with usleep_range(). - Fix to use pre_req and post_req only for DMA transfer. - Fix alignment check of sg buffer. [USB2.0 Function] - Fix return value of usbhsg_ep_disable(), so the suspend procedure works when the g_mass_storage enables. - Fix NULL packet received sequence. - Fix UGCTRL2 value for R-Car Gen3. [USB3.0 Function] - Protect usb3_ep->started in usb3_start_pipen(), so kernel panic does not occur when executing iperf with g_ncm. - Confirm an error does not occur when executing interrupt transfer with g_zero by correcting evaluation procedure. - Confirm g_mass_storage is recognized by Host PC after role swap. Please use USB 2.0 cable, because role swap is compatible with High-Speed. - Fix free size in renesas_usb3_dma_free_prd(). - Fix zlp transfer by the dmac. - Fix pm_runtime_enable/disable and add CONFIG_PM_SLEEP to suspend/resume functions. [PCIe driver] - PCIe of R-Car Gen3 can access only 32 bit memory area at a certain point, even if using IPMMU. This is a H/W specifications. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: ULCB: Add default SOC_FAMILY for ULCBThao Nguyen14-24/+4
The SOC_FAMILY is already different between H3ULCB and M3ULCB: H3ULCB uses SoC r8a7795. M3ULCB uses SoC r8a7796. Hence, setting this value in h3ulcb.conf and m3ulcb.conf to allow images to be built without setting SOC_FAMILY in local.conf. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: gstreamer1.0-omx: Fix issue downloading from HTTP/HTTPS proxyThao Nguyen1-0/+4
This issue exists in some special environment. Submodule can not be downloaded, because HTTP/HTTPS lose their values during configure state. Temporary solution is exporting those values in configure state. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: EthernetAVB: Update SRCREV to follow latest versionThao Nguyen3-3/+3
This commit updates SRCREV for EthernetAVB drivers for below changes: AVB Streaming Driver - Fix DMA-API device driver frees DMA memory with different size. - Fix problem of can setting out of range value of 'major' parameter. MSE Core - Add invalid calling state checking of MSE Adapter I/F in Kernel API. - Fix overflow problem of timer delay value calculation by some conditions of frame rate parameter (e.g. 1/30 fps). - Reduce idling time in streaming pipeline process by queueing of transmission request. - DMA allocation via dma_alloc_coherent fails without CONFIG_OF. - Fix overrun output area in parsing of u16/u32 values. - Fix resource leakage at probe when error occurred. - Fix problem of can setting out of range value of 'major' parameter. MSE V4L2 - Reduce data concatenate processing of fragment data for MPEG2-TS and MJPEG. - If multiple open the same video device, print out log message of "v4l2 device is opened". MSE CVF MJPEG - Fix problem of EOS marker position and progressed position mishandling in packetize buffer if condition of small picture size of MJPEG. - Fix issue that stream transmission speed is too slowly if the data size per picture is huge. MSE CVF H264 - Fix problem that the setting value of bytes_per_frame parameter is not effects if CVF H264 format. - Fix issue that case of H264 transmission, the stream payload data often corrupted if the data is high bitrate. MSE IEC61883-4 - Fix problem that streaming stopping process stall at occurred short of data. - Fix problem that send the broken payload stream if no PCR value in MPEG2-TS stream. - Fix losing trailing data when streaming stopped on Talker. MSE ALSA - Fix losing trailing data when streaming stopped. - In this version, there is a difference in audio timestamp phase by each Listener device. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: copyscript: Update MD5SUM for ADSP packagesThao Nguyen1-2/+2
The ADSP packages have been updated for following fixes: - TDM Renderer framesize. - EQZ->RDR. - DMAC STAGE. - SSI Setting. - ADMAC Channel Swap. - PDMA/ADMAC busy check. - SRC busy check. - SSI busy check. Documents are also updated. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: kernel-module-vsp2driver: Update SRCREV to follow latest versionThao Nguyen1-1/+1
This commit updates VSP2 drv for following changes: - Add __user attribute. - Make local functions become static. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: VSPM: Update SRCREV for VSPM and VSPM I/F driverThao Nguyen2-2/+2
This commit modifies SRCREV of VSPM and VSPM I/F drv for below updates. VSPM drv: - Fix wrong argument of VSP_ROUND_UP. - Simplify IS_VSP_CH(ch) macro. - Remove unused variables. - Use NULL instead of 0. - Make local data/functions static. VSPM I/F drv: - Fix invalid memory access. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: kernel-module-mmngr: Update version and correct compile optionThao Nguyen2-2/+2
This commit updates MMNGR driver to v0.13 for following changes: - Remove IPMMU(PMB) support due to hardware restriction. - Add IPMMU(MMU) support for memory allocation. - Fix compiler warnings. - Add System Suspend-to-RAM support for IPMMU(MMU). - Disable TLB function in IPMMU-VC0/VC1/VP0/VP1 due to hardware restriction. - Add IPMMU(MMU) support for SSP. It also modifies compile option of driver corresponding to new UM. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: copyscript: Update MD5SUM for ICCOM packagesThao Nguyen1-2/+2
New ICCOM pkgs have been released. This patch updates MD5 values for ICCOM pkgs from v0.9.0 to v1.0.0. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: arm-trusted-firmware: Update SRCREV to follow latest versionThao Nguyen1-1/+1
This commit updates IPL and Secure Monitor to Rev1.0.15 rev3. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: u-boot: Update u-boot to v3.5.4Thao Nguyen1-2/+2
This commit updates u-boot to BSP v3.5.4 for following changes: - Remove MSTP registers values rewriting process. - Fix multiple declarations of DECLARE_GLOBAL_DATA_PTR. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: linux-renesas: Update BSP to v3.5.5Thao Nguyen3-6/+26
This commit updates Linux BSP from v3.5.3 to v3.5.5 for following items: Kernel core - Add ZG clock divider support. - Revert and fix about Suspend to RAM. - Add DEVFREQ support for GSX. - Add usb companion property in EHCI. - Add USB3.0 peripheral device node. - Use IPMMU(MMU mode) for IPMMU-VP and IPMMU-VC0/1 with R-Car H3 Ver.1.x, for IPMMU-VP0/1 and IPMMU-VC0/1 with R-Car H3 Ver.2.0, in IPMMUVC0 with R-Car M3. - Add override support for the actual number of MMU contexts. - Fix audio Mix support on DTSI. Power Management - Cleanup AVS driver. - Update voltage for VDD_DVFS and VDD. Audio driver - Resolve 16bit/24bit capture noise problem by enabling clock-frequency for both 4.1kHz/48kHz and fixing possible NULL pointer dereference. - Resolve playback problem of sampling rate 32kHz, 176.4kHz and 192kHz by enabling clock-frequency for both 44.1kHz/48kHz. - Resolve “can’t get dma channel” error at the time of unbind/bind by fixing up of_clk_add_provider() usage for multi clkout and calling the missing of_clk_del_provider() when removing. - Resolve 48kHz audio 1-20k sweep noise problem by enabling clock-frequency 44.1kHz/48kHz. - Merge rsnd_kctrl_new_m/s/e into rsnd_kctrl_new(). - Fix 24bit capture noise problem by not using PDTA bit for 24bit on SSI. - Request/Release DMA channel each time for avoiding error of getting dma channel. Display driver - Use dma_map_sg_attrs to skip synchronization of the CPU cache. - Add mode_fixup callback function. - Control clock of bridge during S2RAM and change to control clock via clock driver. - Fix reserved register setting for R-Car for H/W manual update. - Add null pointer check for brs option. - Revert "drm: bridge/dw-hdmi: Add HDP interrupt disable for suspend". - Fix hierarchy of driver structure for clk-5p49x. DMA Engine driver - Revert dma pause function because it was rejected by upstream. GPIO driver - Revert and fix about Suspend to RAM. - Add GP-1-28 port pin support for R-Car H3 Ver.2.0 because of H/W manual updating to Rev.0.54E. Modify just PFC and DT. SCIF/HSCIF driver - Resolve system freezing. SD/MMC driver - Add initial setting of interrupt mask register. - Fix command sequence at error detection. - Fix “Wait for CBSY instead of SCLKDIVEN”. - Fix processing when detecting SCC error and fix error handling when issuing CMD23. - Fix reset_hs400_mode. - Fix problem that SDIO interrupt may be missed. USB3.0 Function - Add Role-change support. - Add DMA support. - Add basic function support. USB2.0 Host driver - Fix mouse connection time (2 second or more) when resuming. USB3.0 Host driver - Support for R-Car Gen3 USB 3.0 PHY for SSC function. - Add R-Car Gen3 USB 2.0 clock selector PHY, support for R-Car Gen3 USB 3.0 PHY. Video Capture driver - Add 2 lane support with rcar-csi2.c. - Fix image alignment for setting pre clipping. - Fix wait time for software reset in rcar-csi2.c because of H/W manual updating to Rev.0.54E. - Fix PHY initialization in rcar-csi2.c because of H/W manual updating to Rev.0.54E. - Fix PHTW register setting in rcar-csi2.c because of H/W manual updating toRev.0.54E. - Fix wait procedure usleep_range from msleep in adv7482.c. - Fix channel get procedure. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: Fix issue downloading from http/https proxyRenesas-Yocto-v2.19.0Thao Nguyen3-0/+12
This patch corrects the problem of git submodule when network of build environment uses http/https proxy. Change-Id: I5ac7a63da7336f3422231863aa08c5fe69ad54df Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: copyscript: Modify ClickThrough copyscript for ZIP archiveVladimir Barinov1-4/+7
This commit updates ClickThrough copyscript to work with ZIP archive, which is downloaded directly from URL, instead of tarball. Change-Id: Idb3de7922d2445d8efe7934b0b9b37796607c528 Signed-off-by: Vladimir Barinov <vladimir.barinov@cogentembedded.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: arm-trusted-firmware: Set PMIC_LEVEL_MODE to 0 for ULCBYusuke Goda1-1/+1
The operation mode of the PMIC for Salvator-X and ULCB are different: - ULCB : PULSE MODE (PMIC_LEVEL_MODE=0) - Salvator-X : LEVEL MODE (PMIC_LEVEL_MODE=1(default)) This commit updates arm-trusted-firmware recipe to check PMIC_LEVEL_MODE option and to control the corresponding PMIC. Change-Id: I152c1286d525000f58c678ec37eb6aac9502ac45 Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: h3ulcb: Add new device tree for H3ULCB WS2.0Yusuke Goda1-1/+4
H3ULCB will support new board with chip WS2.0. There will be 2 device trees for H3ULCB corresponding to 2 board types: - r8a7795-es1-h3ulcb.dtb: for H3ULCB WS1.1 - r8a7795-h3ulcb.dtb: for H3ULCB WS2.0 Change-Id: Ic11ee3f3e734641b020e3332721babd465cce2ae Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: cms-user-module: Update lib version and MD5SUM for new CMS packagesThao Nguyen2-9/+9
This commit modifies md5sum values in copyscript and libraries versions in cms-user-module corresponding to new CMS packages. New packages will update following items: BCM - Update to v0.6.1. - Calculation accuracy has improved. DGC - Update to v0.6.1. - Add scene change detection to read register. - Improve calculation accuracy and performance. BLC - Update to v0.6.0. - Fix bug. Change-Id: I10a9e201ea518bb5ea43fc9929424e5240ce5a68 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: copyscript: Update MD5SUM for Video packagesThao Nguyen1-13/+13
This commit modifies md5sum values of Video packages to ver.3.0.9. Change-Id: I6fcb2f2dea27b02c1c9454a4fe56d57cf1c3c12d Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: kernel-module-avb-mse: Update SRCREV for avb-mse driverThao Nguyen1-1/+1
This commit updates SRCREV in recipe for following changes: - Update version to v0.6. - Fix range overflow in parsing streamid of sysfs I/F. Change-Id: I773122bebf0716a699ad8a212c6cb770d58830c4 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: copyscript: Update MD5SUM for ADSP packagesThao Nguyen1-3/+3
This commit modifies md5sum values for 4/E M3 Beta2(TDM Plugin) packages to update following items: Extension - Multiplicity/ADMAC/Connectivity. New Support - TDM Software Plugin. Change-Id: I87a17cab5a03a347a3034a62f78987bf3bfda417 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: gles-user-module: Change name of graphics initscriptThao Nguyen2-4/+4
This patch changes the GFX initscript from rc.pvr to prvinit. Due to Linux culture, filename on /usr/bin should not have rc.* format. Change-Id: I0fd9c1862b5f58219190e7f14ee3baf0ea465f9f Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>