Age | Commit message (Collapse) | Author | Files | Lines |
|
This commit upgrades Linux BSP to v3.9.4 for the following changes:
- Fix power domain for FCPCS of r8a77965 in the device tree according
to H/W UM Rev.1.50 correction in the future.
- Rename AVB_AVTP_MATCH and AVB_AVTP_CAPTURE pin function definitions
of r8a77990 according to H/W UM Rev.1.50 correction in the future.
- Revert the patch of r8a77990 pinctrl about MOD_SEL1 bit31 and bit30
according to H/W UM errata for Rev.1.00.
- Fix cpg_sd_clock_round_rate return value.
- Rename some pin function and cpg definition according to H/W UM
Rev.1.50 errata.
- Rename SEL_ADG_B to SEL_ADGB and rename SEL_ADG_C to SEL_ADGC
according to H/W UM Rev.1.50.
- Fix SCIF5 DMA channels according to H/W UM Rev.1.50.
- Fix clock and reset for ivdp1c according to H/W UM Rev.1.50.
- Add support for R-Car M3 ES3.0.
- Fix MMC cannot probe by modprobe command after S2R issue.
Change-Id: I12901a91f2e6ebaf5879456faeb5f9d3baad6f32
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Duy Dang <duy.dang.yw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds device tree for M3 Ver.3.0.
Change-Id: Ifbca4171a00a25e00f01acc327222c952d070bcc
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
M3NULCB board specifications:
R-Car M3-N Ver.1.1
DDR 2GiB
eMMC 8GB(KLM8G1GESD-B04P)
Change-Id: Ie857f76d7c96cd6e9a9196ce9bc27d98e878b161
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Duy Dang <duy.dang.yw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds build requirement of git configuration
for user name and email to the README file.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds DISTRO_FEATURES_append = " dvd_encryption_library"
to build DVD Encryption Library package.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM list for OMX Video packages.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM list for OMX Audio packages.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM list for CMS packages.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates library version of CMS module from 1.9.0
to 2.0.0.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds DVD Encryption Library to build in MMP configuration.
This package uses DISTRO_FEATURES_append = " dvd_encryption_library"
to be built.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds DVD Encryption Library to use with copy proprietary
software script.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds a new recipe for DVD Encryption Library package.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit fixes the error when re-build openavnu:
| aarch64-poky-linux-gcc: error: unrecognized argument in option '-mcmodel=kernel'
| aarch64-poky-linux-gcc: note: valid arguments to '-mcmodel=' are: large small tiny
| aarch64-poky-linux-gcc: error: unrecognized command line option '-mno-red-zone'; did you mean '-fno-regmove'?
The error comes from cleaning other unnecessary modules which have
some make flags for x86_64 architecture. In AVB software, Renesas BSP
uses some daemons (mrpd maap gptp shaper) only. Hence, this fix makes
do_configure not to clean all AVB modules to avoid the above error.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of gstreamer to follow the latest
version for the following change:
[omxvideodec]
- Query drain before inactivate omxbufferpool to avoid out
standing buffers
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Soft paths in source directories may cause error when changing values
of variables in these paths.
Hence, this commit changes soft paths in source install directories to
hard paths.
Signed-off-by: Tan Nguyen <tan.nguyen.wh@renesas.com>
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM list for ADSP packages.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of vspm and vspmif driver to follow
the latest version for the following changes:
[vspmif_drv]
- Fixed an issue where vspmif could crash.
[vspmif_lib]
- To correspond boards that do not support Full HD.
[vspm_drv]
- Fix VI6_HGO/HGT_WBUFS setting from CPU write to Display List.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of EtherAVB driver and applications
to follow the latest version for some changes as below:
[avb-mse]
- Core: Add filter of outliers in create avtp timestamp
- Core: Fix problem that the streaming might be stalled
- Core: Fix missing bit mask at difference calculation of M2TS timestamp
[avb-applications]
- avdecc: make: fix cmake error if not doing submodule update
- avblauncher: update example script affect by changed MSE usage
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of MMNGR modules to the latest version
for the following changes:
- Improve error handling for import phases and close() function about
Refcount of dmabuf in MMNGRBUF.
- Add support for Linux v4.14-LTSI.
- Remove unnecessary check when parsing reserved memory regions in DT
- Disable IPMMU TLB cache function in E3 Ver.1.x due to hardware
restriction.
- Add E3 Ver.1.1 support.
- Add error handling for mm_probe() function.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of optee-os recipe for these changes:
- Fix the MMU configuration of shared memory.
- Merge the following pull request.
https://github.com/renesas-rcar/optee_os/pull/2
- Change a cipher method of AES-CTR from a block cipher to a stream
cipher.
- Fix exclusive controls of asymmetric encryption.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of IPL and Secure Monitor to Rev2.0.0
for these changes:
[IPL]
- Update DDR setting for E3(rev0.11).
- Change the condition of data transfer end of SCIF transfer.
- Modify address area in the DDR memory config log output.
- Update H3 Ver.3.0 QoS setting rev.0.09.
- Update E3 Ver.1.0 QoS setting rev.0.04.
- Update H3 Ver.2.0 QoS setting rev.0.20.
- Update H3 Ver.3.0 QoS setting rev.0.10.
- Update M3 Ver.1.1 QoS setting rev.0.18.
- Update M3N Ver.1.1 QoS setting rev.0.08.
- Update E3 Ver.1.0 QoS setting rev.0.05.
- Modify load destination variable of the Cert Header to static.
- [H/W Restriction No.100]:
+ Disable TLB function of IPMMU cache on E3 Ver.1.1.
+ Disable TLB function of IPMMU-PV0 cache on E3 Ver.1.x.
[Secure Monitor]
- Add API for getting DRAM capacity information.
- Change the execution timing of system RAM copy process to BL31
startup.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates do_deploy function to drop the SoC name when
deploying srec files, the purpose is to keep the legacy name of U-Boot
build results.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of U-Boot to version 3.9.1 for
the following changes:
- Generate fitting memory map on R-Car Gen3, fix protection area
access error and fix to enable icache early in R-Car Gen3.
- Add module clock stop before OS startup.
- Reorder TMIO clock handling.
- Do not issue CMD 6 on SD 1.00 and SD 1.01.
- Fix protection area access error at Cortex-A53.
- Avoid unsupported internal delay mode for R-Car E3 and limit to
100Mbps.
- Revert "net: Fix cache misalignment message after network load
operations"
- Add "usb_pgood_delay" to the default environment variable.
- Fix warning of the make W=1 C=2.
- Resolve the problem that the eMMC read of the environment setting
value may fail at startup.
- Add vbus-supply regulator support.
- Resolve the problem that the SD card (UHS, etc.) isn’t
recognized.
- Fix MOD_SEL bit numbering for R-Car E3.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xv@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to v3.9.2 for the following changes:
[Kernel]
- Add support for RCKSEL clock selection.
- Fix pin functions of R-Car E3 according to H/W UM Rev1.00 errata.
- Fix warning of the make W=1 C=2.
- Identify R-Car M3 Ver.1.3.
- Add the big.LITTLE CAS scheduler fix patches.
- Fix MOD_SEL bit numbering for R-Car E3.
[Power Management]
- Fixup power-domains of 3DGE for R-Car E3 Ver.1.0 and add device
tree file for R-Car E3 Ver.1.0.
[Audio Driver]
- Fixup clock start checker.
- Resolve the problem that the noise is generated during long playback
with R-Car E3 Ebisu-4D board by kernel rebasing.
[Display Driver]
- Add function of suspend and resume to adv7511_drv.c and add hot plug
event function at resume in rcar_du_drv.c.
- Add depends on DRM_RCAR_DU to config DRM_RCAR_LVDS.
- Revert "drm: rcar-du: Fix legacy DT to create LVDS encoder nodes".
- Add clock function for LVDS PLL.
[Ethernet Driver]
- Decrease TxFIFO depth of Q3 and Q2 to one.
- Fix not to call phy_resume() if PHY is not attached and add toggling
phy reset if PHY is not attached.
- Revert "ravb: RX checksum offload" for communicating of Q-Tag VLAN
frame correctly.
- Resolved the problem that the S2RAM resume failed on R-Car E3
Ebisu-4D by kernel rebasing.
- Avoid unsupported internal delay mode for R-Car E3 and limit to
100Mbps.
[I2C Driver]
- Check bus state before reinitializing.
[IPMMU Driver]
- Fix crash on early domain free.
- Revert "arm64: defconfig: Enable QCOM_IOMMU" for suspending with
LTSI kernel.
- Correct whitelist devices assignment.
[PCIe Driver]
- Avoid PCI device removing/rescanning through sysfs triggers
a deadlock.
[PWM Driver]
- Avoid deadlock warning when removing PWM device.
[SD/MMC Driver]
- Fix card initialization failure in high speed mode.
- Add adjust HS400 offset by manual calibration mode and adjust HS400
offset by manual calibration mode for R-Car M3 Ver.1.3.
[USB2.0 Function]
- Add reset_control.
- Backport upstream patches to support OTG mode for R-Car E3.
- Make DMAC system sleep callbacks explicit.
- Add Super-Speed (b-device) support.
[Video Capture driver]
- Review adv748x driver for R-Car E3 Ebisu board and add option for
changing SD output route to TXA.
- Revert "rcar-vin: rcar-csi2: Add blank margin when caluculating bit
rate" and fix pixel rate values.
- Add CPG reset and release when using digital pin.
[RWDT Driver]
- Don't keep timer value during suspend/resume.
- Don't set divider while watchdog is running.
This also updates ADSP driver patches to adapt to the new
Linux version.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xv@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds more device trees for Ebisu 1.0 and Ebisu-4D 1.0:
- r8a77990-es10-ebisu-4d.dts
- r8a77990-es10-ebisu.dts
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit enables U-Boot configuration to build all binaries
for Salvator-X and Salvator-XS boards.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit enables PAM distro feature for BSP minimal configurations,
its target is to support LTP test on core-image-minimal.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit changes the default SoC in local-ltp.conf to r8a7795.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
IPL and U-boot were built all binaries of H3 DRAM configurations at one
time. Hence, H3_OPTION was not used anymore.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit enables USB3H as default for Ebisu.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
RENESAS_DATADIR must be able to be overwritten.
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
The iccom user module recipe requires iccom-control.inc file which
defines USE_ICCOM variable, but nothing uses it. This commit removes
that requirement.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to add a new sample test program binary
(sample_pvconv) to rootfs.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies gstreamer recipes for following updates:
[gst-omx]
- Fix issue of seeking with dynamic change in dmabuf mode.
- Support dynamic change in src pad.
- Move initial and free arrays which used for use-dmabuf's handling from
init and finalize to start and stop.
- Improve log and free memory in error case.
[gst-plugins-good]
- Static analysis: Remove duplicated condition.
[gst-plugin-vspfiler]
- Don't reinitialize colorimetry table if it has already been set up.
- Fix memory leak.
- Do not set colorimetry to out structure containing in format.
- Modify variable type.
- Fix initialization of GValue.
- Remove last commma in enum.
- Change position of declaration to beginning of the function.
- Change variable name to avoid duplication of declarations.
- Fix copyright years in header.
- Intersect format in fixate_caps().
- Fix possible segmentation fault during caps fixation.
- Support colorimetry negotiation.
- Add option for setting input buffer color range.
- Support encoding and color range setting.
- Reduce arguments of set_vsp_entities().
- Modify transfrom_caps() for more accurate operation.
- Delete unnecessary variable in transform_caps().
- Modification of variable type.
- Measure for converting odd size rgb buffer to yuv.
- Implement measure for odd size yuv buffer input.
- Change the order of linking and set format.
- Delete unnecessary wpf linking.
- Deactivate input bufferpool before remake.
- Don't make new output pool when it exists already.
- Change the state of flag of playing when stop streaming.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
The populate_sysroot of gles-user-module must depends on the
populate_sysroot of the virtual/mesa, because header from
gles-user-module depends on the header from virtual/mesa.
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
gles-user-module provides virtual/egl in order to use in core-image-x11
which is not supported anymore, virtual/egl is now provided by libegl.
This commit removes virtual/egl in PROVIDES list.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This recipe requires avb-applications.inc which defines USE_AVB
variable, but nothing uses it. So it is safe to remove that
requirement.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
gstreamer-omx should RDEPENDS on omx-user-module, and not on libomxil.
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit changes to use distro_features_check class to show
the correct error message when building adsp modules without
its distro feature in local.conf:
| ERROR: Nothing PROVIDES 'adsp-fw-module'
| adsp-fw-module was skipped: missing required distro feature 'adsp' (not in DISTRO_FEATURES)
The USE_ADSP variable is not used anymore in the recipes. It is safe to
remove adsp-control.inc requirement.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit removes a redundant code in dvd-user-module recipe.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades library versions as below:
libcmsbcm.so.1.8.0 upgrades to libcmsbcm.so.1.9.0
libcmsblc.so.1.8.0 upgrades to libcmsblc.so.1.9.0
libcmsdgc.so.1.8.0 upgrades to libcmsdgc.so.1.9.0
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM for new CMS packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM for new video packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM for new OMX audio packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MD5SUM for new ADSP packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit applies a fix patch to correspond boards that do not support
Full HD.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates V4L2/VSPM SRCREV for following updates:
[vsp2driver]
- Support the expression for color space conversion.
- Fix minimum input pixel size for RGB format to 1 pixel.
[vspm_drv]
- Move function definitions out of vspm_cmn.h.
- Fix macro name to register name.
[vspmif_drv]
- Convert user_data and cb_func to user pointers.
- Remove __user macro from the variable declaration.
[vspmif_lib]
- Add prototypes for VSP Manager API.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of weston for following items:
[v4l2-renderer]
- Use uint8_t* for variables to be operated by pointer.
- Apply to "U" suffix constatnt of unsigned type.
- Fix according to static code analysis tool.
- Improve attaching shm buffer.
- Use stride of shm buffer, not of KMS BO.
- Remove bytesused from v4l2_renderer_plane.
- Use length instead of byteused.
- Set -1 when closing dmabuf.
- Remove unused members in v4l2_surface_state.
- Remove unused member bpp.
- Free buffers queued into RPF which is disabled.
- Allow set image width/height to 1 for input VSP in using RGB.
- Skip rendering the surface which buffer isn't attached.
- Expand damage region when using YUV444 and YVU444 color format.
- Expand damage region when using multi sample pixels format.
- Make opaque region the same as non-opaque.
- Don't release dmabuf buffer immediately when client release buffer.
[compositor-drm]
- Use bool type for flag for using v4l2-renderer.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates QoS driver SRCREV for following item:
[qos_drv]
- Feedback of static analysis tool result.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
There is no reason to use UVCS_SRC variable for the source URI instead
of pointing directly. So this commit removes it.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|