aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2017-11-10Radio RST gpio typo fixVladimir Barinov1-0/+0
It should be offset 7 and not 8 in si_init script
2017-11-09Update si_init script to work on H3/M3 ULCBVladimir Barinov1-0/+0
H3 and M3 have differnt gpiochip base number for PCA9539@75 gpio expander. Update si_init script to work for both H3ULCB and M3ULCB
2017-11-09Videobox Mini supportVladimir Barinov2-3455/+2390
1) V3MSK VideoBox Mini support 2) H3ULCB (es1.x, es2.0) Videobox Mini support 3) Optimize Videobox dts files
2017-11-07V3M: enable MMNGRVladimir Barinov1-2/+2
2017-11-07Fix pinmux conflict on V3MSKVladimir Barinov1-11/+11
CANFD0/1 are enabled both now
2017-11-07Replace pcm creation fix with upstream varianVladimir Barinov3-41/+175
2017-11-05V3MSK boards updateVladimir Barinov2-5/+17
- remove CANFD0 since conflicts with HDMI on pinmux - enable i2c3 on kf - deploy v3msk-vb
2017-11-03R8A7797: kernel updatesVladimir Barinov2-106/+647
- add CANFD - add V3M videobox board - add CANFD to V3M KF - add eMMC to V3MSK based boards
2017-10-31Update radio scirptsVladimir Barinov4-31/+29
Add radio scripts: si_fm si_scan si_preset
2017-10-30Fix incorrect radio reset gpioVladimir Barinov1-6/+6
this fixes handling Radio_RST
2017-10-27MOST: add scripts used for testingVladimir Barinov3-0/+23
Add MOST card setup scripts used for testing
2017-10-27MOST updateVladimir Barinov6-30/+144
1) fix MOST soundcard add during setup 2) optionally add MOST to dtsi via KF_ENABLE_MOST flag in local.conf 3) optionally add SD3 to dtsi via KF_ENABLE_SD3 flag in local.conf 4) add MOST options to kernel config
2017-10-17disable BT in pulseaudio since it is brokenVladimir Barinov1-1/+1
New rcar sound driver constraints break BT (disable it temporary to have other soundcards funtional, since this one crash pulseaudio daemon)
2017-10-17Fix Mulitaudio (TDM mode) playback in 2.23Vladimir Barinov1-3/+49
2017-10-17enable pulseaudio daemon at first bootVladimir Barinov1-0/+2
It is used sysvinit to enable/disable pulseaudio daemon with sustemd the sysvinit services is not installed during build. Force install.
2017-09-27FIX ssi pingroup used for PCM3168AVladimir Barinov1-1/+1
Since 2.23 it is renamed: ssi34_ctrl -> ssi349_ctrl
2017-09-27revert snd card name to wl18xxVladimir Barinov1-1/+1
it isokay tohave sound card name as wl18xx since it is not platform driver name This is convenient for use already setup pulseudio config file that uses wl18xx name
2017-09-27Name wl18xx dumy pcm card as wl18xx-codecVladimir Barinov2-2/+2
This fixes wifi since it's platform driver uses the same name asoc driver loader in kernel but wifi as a module hence wifi is rejected
2017-09-25Add MOSTVladimir Barinov10-1/+762
2017-09-20Use OpenCV 2.4 by default (necessary for public release SV)Grigory Kletsko1-1/+1
2017-09-20Merge branch 'v2.23.0' of git://github.com/CogentEmbedded/meta-rcar into v2.23.0Grigory Kletsko1-1/+0
2017-09-20Build fail fixVladimir Barinov1-1/+0
opencv-3.2 and opencv-samples-2.4 conflict while installing opencv-samples. pencv-samples are already inherited by opencv-3.2.bb
2017-09-20Update supported boards infoVladimir Barinov1-1/+3
2017-09-20Add gflags recipe, necessray for opencv 3.2Grigory Kletsko1-0/+20
2017-09-20Build offline patchesVladimir Barinov3-0/+167
This patches will alow to build with BB_NO_NETWORK=1 only from download cache
2017-09-20switch to 2.23.0 bspVladimir Barinov14-1289/+27
2017-09-18[CV] Add gflags recipe, necessray for opencv 3.2Grigory Kletsko1-0/+20
2017-09-18Add opencv 3.2 and use it by defaultGrigory Kletsko9-8/+288
2017-09-18Merge branch 'v2.19.0' of git://github.com/CogentEmbedded/meta-rcar into v2.19.0Grigory Kletsko17-113/+1848
2017-09-17Build offline patchesVladimir Barinov3-0/+167
This patches will alow to build with BB_NO_NETWORK=1 only from download cache
2017-09-14Initial commit for ADAS boards support in 2.23.0Vladimir Barinov208-0/+62060
2017-09-09KF V0: fix CAN0Vladimir Barinov1-3/+3
2017-09-08V3M: fix DU PLLVladimir Barinov1-3/+3
2017-09-08RDCAM20: fix FSINVladimir Barinov1-4/+4
This fixes AWB funciton withFSIN enabled (fix overbrightness at some ambient conditions)
2017-08-29KF M3: disable xhciVladimir Barinov1-1/+5
Disable xhci on M3 KF since somce boards instroduced error
2017-08-28ADAS boards: fix ssi012(3)9 pinmuxes on H3 and M3Andrey Gusakov1-8/+5
H3 has ssi01239_ctrl group M3 has ssi0129_ctrl group Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
2017-08-28Update capture test: support raw12 rendering to FBVladimir Barinov1-0/+0
2017-08-28Add V3MSK and deploy legacy KF imagesVladimir Barinov6-0/+362
2017-08-28Add V3MSK on KF V0Vladimir Barinov1-9/+39
2017-08-28Add AR0132 LVDS camera supportVladimir Barinov1-40/+935
2017-08-26Add V3M Eagle machineVladimir Barinov9-0/+341
2017-08-25LVDS: fix camera start-up (stability work)Vladimir Barinov1-12/+79
Some cameras with OV10640/OV490 are bad in h/w and does not match start up sequence: PWDN/RESETB that lead to OV10640 hang. This patch fixes that in s/w.
2017-08-21Fix delay if used external gpio for PoC powerVladimir Barinov1-5/+6
2017-08-20Add V4L2_CID_MIN_BUFFERS_FOR_CAPTURE controlVladimir Barinov1-10/+34
This is needed for gstreamer to exclude gstreamer hacking
2017-08-20LVDS: fix camera startupVladimir Barinov1-40/+54
This fixes race condition between camera firmware start and driver initialization.
2017-08-18Add opencv 3.2 and use it by defaultGrigory Kletsko9-8/+288
2017-08-16Add V3MSK Kingfisher board supportVladimir Barinov1-2/+552
2017-08-16Typo fixesVladimir Barinov3-3/+3
2017-08-15KF: use ulcb-kf.dtsiVladimir Barinov1-5318/+2176
Use one dtsi file for both h3/m3ulcb kingfisher boards
2017-08-15revert gpio-max732x-set-gpio-ouput-low-at-initVladimir Barinov1-1/+0
This patch introduces bug