| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2018-02-26 | V3HSK: add access to CPLD |   Vladimir Barinov | 1 | -40/+189 | |
| This add CPLD access for V3HSK | |||||
| 2018-02-26 | RCAR I2C UBOOT: add 16 bit addressing | Vladimir Barinov | 2 | -0/+89 | |
| This adds 16bit addressing for RCAR I2C in uboot | |||||
| 2018-02-26 | V3MZF: fix Micrel reset line | Vladimir Barinov | 1 | -1/+4 | |
| 2018-02-26 | V3MSK: unify env variables in QSPI and fix cpld access | Vladimir Barinov | 1 | -3/+5 | |
| 1) set env veriables in QSPI instead of eMMC 2) on VBM V2 the gp0_14 is used to disable conflicting with CPLD pin from CANFD transceiver | |||||
| 2018-02-26 | Add V3H Starter Kit board | Vladimir Barinov | 2 | -0/+549 | |
| This adds V3H Starter Kit board support | |||||
| 2018-02-26 | Add V3M ZF board support in uboot | Vladimir Barinov | 2 | -0/+475 | |
| 2018-02-26 | V3H: enable RAVB 1000BaseT speed | Vladimir Barinov | 1 | -1/+15 | |
| NOTE: RAVB is not default on Condor board GETHER is default on Condor board | |||||
| 2018-02-26 | V3M SK: fix CPLD access in uboot | Vladimir Barinov | 1 | -3/+9 | |
| 2018-02-26 | V3M: enable RAVB 1000BaseT speed | Vladimir Barinov | 1 | -5/+19 | |
| 2018-02-26 | V3M EAGLE: enable cache in uboot | Vladimir Barinov | 1 | -2/+2 | |
| 2018-01-31 | uboot: add RCAR I2C definitions | Vladimir Barinov | 1 | -0/+32 | |
| 2018-01-31 | V3M/H uboot: fix reset, Micrel phy reset, emmc | Vladimir Barinov | 5 | -82/+85 | |
| 1) fix Eagle reset 2) add Condor Micrel PHY reset at startup 3) fix Eagle eMMC (expansion board with emmc 1.8V) 4) remove unused stuff | |||||
| 2018-01-25 | Condor: fix eMMC power | Vladimir Barinov | 1 | -5/+16 | |
| Condor eMMC power is 1.8V by default. This sets pingroup POC voltage to 1.8V | |||||
| 2018-01-25 | V3H: Add GETHER | Vladimir Barinov | 2 | -66/+93 | |
| 1) Add GETHER in uboot/kernel 2) Condor board: setup as default interface | |||||
| 2018-01-23 | V3M: fix broken build on V3M targets | Vladimir Barinov | 2 | -7/+8 | |
| This fixes broken build on V3MSK and Eagle caused by uboot changes after adding V3H platform | |||||
| 2018-01-22 | Add V3H support and Condor board | Vladimir Barinov | 3 | -0/+4428 | |
| 1) add uboot R-Car V3H SoC (r87798) and V3H based Condor board 2) add kernel R-Car V3H SoC (r87798) and V3H based Condor board | |||||
| 2018-01-22 | V3MSK: minor naming fixes | Vladimir Barinov | 1 | -2/+2 | |
| 2018-01-22 | Eagle: enable eMMC in uboot | Vladimir Barinov | 1 | -7/+29 | |
| 2018-01-08 | RDRIVE: fix console hang on SCIF1 | Vladimir Barinov | 1 | -2/+24 | |
| RDRIVE uses console on SCIF1. Since IPL code removed SCIF1 clock enablement then we have to add clock enable in uboot | |||||
| 2018-01-04 | V3M: add IPL | Vladimir Barinov | 1 | -15/+6 | |
| Add V3M in ATF | |||||
| 2017-12-05 | Release ADAS boards in BSP2.23.1 | Vladimir Barinov | 3 | -74/+59 | |
| 2017-11-17 | V3M: fix QSPI access and tune MMC clock | Vladimir Barinov | 2 | -38/+51 | |
| 2017-11-17 | V3M: add V3MSK board in uboot | Vladimir Barinov | 2 | -0/+814 | |
| Support eMMC, QSPI, Ether, reset, CPLD, console | |||||
| 2017-09-14 | Initial commit for ADAS boards support in 2.23.0 | Vladimir Barinov | 27 | -0/+7603 | |
 |
index : meta-renesas-rcar-gen3 | |
| Grokmirror user |
| aboutsummaryrefslogtreecommitdiffstats |