summaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3-adas/recipes-bsp
AgeCommit message (Collapse)AuthorFilesLines
2018-03-13V3M: add CR7 loader supportVladimir Barinov4-27/+67
Make V3M boot from CR7 by default (look in eLinux instructions)
2018-02-26V3HSK: add access to CPLDVladimir Barinov1-40/+189
This add CPLD access for V3HSK
2018-02-26RCAR I2C UBOOT: add 16 bit addressingVladimir Barinov2-0/+89
This adds 16bit addressing for RCAR I2C in uboot
2018-02-26V3MZF: fix Micrel reset lineVladimir Barinov1-1/+4
2018-02-26V3MSK: unify env variables in QSPI and fix cpld accessVladimir Barinov1-3/+5
1) set env veriables in QSPI instead of eMMC 2) on VBM V2 the gp0_14 is used to disable conflicting with CPLD pin from CANFD transceiver
2018-02-26Add V3H Starter Kit boardVladimir Barinov4-1/+556
This adds V3H Starter Kit board support
2018-02-26V3H CR7 Loader: add PACKAGE_ARCH optionVladimir Barinov1-0/+2
Add PACKAGE_ARCH option to build in machine directory
2018-02-26V3H: add CR7 LoaderVladimir Barinov1-0/+42
Add CR7 Loader for V3H ES1.0 (support only Condor board DRAM setup)
2018-02-26V3H: add arm-trusted-firmwareVladimir Barinov2-0/+2555
2018-02-26Add V3MZF targetVladimir Barinov1-0/+1
2018-02-26Add V3M ZF board support in ubootVladimir Barinov2-0/+475
2018-02-26V3H: enable RAVB 1000BaseT speedVladimir Barinov1-1/+15
NOTE: RAVB is not default on Condor board GETHER is default on Condor board
2018-02-26V3M SK: fix CPLD access in ubootVladimir Barinov1-3/+9
2018-02-26V3M: enable RAVB 1000BaseT speedVladimir Barinov1-5/+19
2018-02-26V3M EAGLE: enable cache in ubootVladimir Barinov1-2/+2
2018-01-31uboot: add RCAR I2C definitionsVladimir Barinov1-0/+32
2018-01-31V3M/H uboot: fix reset, Micrel phy reset, emmcVladimir Barinov5-82/+85
1) fix Eagle reset 2) add Condor Micrel PHY reset at startup 3) fix Eagle eMMC (expansion board with emmc 1.8V) 4) remove unused stuff
2018-01-25Condor: fix eMMC powerVladimir Barinov1-5/+16
Condor eMMC power is 1.8V by default. This sets pingroup POC voltage to 1.8V
2018-01-25V3H: Add GETHERVladimir Barinov2-66/+93
1) Add GETHER in uboot/kernel 2) Condor board: setup as default interface
2018-01-23V3M: fix broken build on V3M targetsVladimir Barinov2-7/+8
This fixes broken build on V3MSK and Eagle caused by uboot changes after adding V3H platform
2018-01-23Pakcages: remove ssh-server-openssh, add spidev_testVladimir Barinov2-0/+21
1) revert ssh-server-openssh isnce conflicts with dropbear 2) add spidev_test
2018-01-22Add V3H support and Condor boardVladimir Barinov3-0/+4428
1) add uboot R-Car V3H SoC (r87798) and V3H based Condor board 2) add kernel R-Car V3H SoC (r87798) and V3H based Condor board
2018-01-22V3MSK: minor naming fixesVladimir Barinov1-2/+2
2018-01-22Eagle: enable eMMC in ubootVladimir Barinov1-7/+29
2018-01-16utest: update CAM-IMR-DRM sample aplciation to support H3Vladimir Barinov1-0/+0
This allows to use quad cameras demo on H3 and show all cameras in equal windows
2018-01-08RDRIVE: fix console hang on SCIF1Vladimir Barinov1-2/+24
RDRIVE uses console on SCIF1. Since IPL code removed SCIF1 clock enablement then we have to add clock enable in uboot
2018-01-07V3M: update ROM API table for ws2.0Vladimir Barinov1-15/+14
This update/fix ROM API table offset for V3M ws2.0
2018-01-05Fix ulcb|salvator-x build fail for arm-trusted-firmwareVladimir Barinov1-1/+2
2018-01-04V3M: add IPLVladimir Barinov3-15/+3016
Add V3M in ATF
2018-01-02Unprotect DBSCVladimir Barinov1-0/+1
This is needed for AXI bus profiling from non-secure world
2017-12-11arm-trusted-firmware: ulcb: fix cpld accessVladimir Barinov2-0/+38
This disabled interrupt function in favour gpio function. This is needed for gpio-bitbang access to cpld
2017-12-05Release ADAS boards in BSP2.23.1Vladimir Barinov3-74/+59
2017-11-29LVDS OTP work if OTP memory emptyVladimir Barinov2-0/+13
Add OV10640 OTP memory BANK#1 flashing script If BNAK#0 isempty then fall into BANK#1 reading in kernel driver. Also add tool for flashing BANk#1 BANK#1 is customer area
2017-11-19Unit test for VIN-IMR-DRM camera capture pipeVladimir Barinov2-0/+25
2017-11-17V3M: fix QSPI access and tune MMC clockVladimir Barinov2-38/+51
2017-11-17V3M: add V3MSK board in ubootVladimir Barinov2-0/+814
Support eMMC, QSPI, Ether, reset, CPLD, console
2017-11-14V3M: support MSIOF on KF V0Vladimir Barinov1-0/+0
1) support MSIOF2/3/4 on Kingfisher V0 board 2) remove unused pins on V3MSK from dts file
2017-11-10Radio RST gpio typo fixVladimir Barinov1-0/+0
It should be offset 7 and not 8 in si_init script
2017-11-09Update si_init script to work on H3/M3 ULCBVladimir Barinov1-0/+0
H3 and M3 have differnt gpiochip base number for PCA9539@75 gpio expander. Update si_init script to work for both H3ULCB and M3ULCB
2017-10-31Update radio scirptsVladimir Barinov4-31/+29
Add radio scripts: si_fm si_scan si_preset
2017-10-30Fix incorrect radio reset gpioVladimir Barinov1-6/+6
this fixes handling Radio_RST
2017-10-27MOST: add scripts used for testingVladimir Barinov2-0/+22
Add MOST card setup scripts used for testing
2017-09-14Initial commit for ADAS boards support in 2.23.0Vladimir Barinov50-0/+8226