meta-renesas-rcar-gen3 -

Age	Commit message (Collapse)	Author	Files	Lines
2017-09-09	KF V0: fix CAN0	Vladimir Barinov	1	-3/+3

2017-08-29	KF M3: disable xhci	Vladimir Barinov	1	-1/+5
	Disable xhci on M3 KF since somce boards instroduced error
2017-08-28	ADAS boards: fix ssi012(3)9 pinmuxes on H3 and M3	Andrey Gusakov	1	-8/+5
	H3 has ssi01239_ctrl group M3 has ssi0129_ctrl group Signed-off-by: Andrey Gusakov <andrey.gusakov@cogentembedded.com>
2017-08-28	Add V3MSK on KF V0	Vladimir Barinov	1	-9/+39

2017-08-16	Add V3MSK Kingfisher board support	Vladimir Barinov	1	-2/+552

2017-08-16	Typo fixes	Vladimir Barinov	1	-1/+1

2017-08-15	KF: use ulcb-kf.dtsi	Vladimir Barinov	1	-5318/+2176
	Use one dtsi file for both h3/m3ulcb kingfisher boards
2017-08-15	r8a7797: add V3MSK board, correct V3M Eagle dts	Vladimir Barinov	1	-80/+325

2017-08-14	Eagle r8a7797 support, adv7511 clock rate fixes	Vladimir Barinov	1	-20/+656
	1) support Eagle r8a7797 2) propagate max clock rate set for adv7511 via dts: Eagle and Kingfisher use ADV7511 KF rate 100Mhz Eagle rate 166Mhz
2017-08-10	Kingfisher: enable PCM audio between CPU and BT module	Andrey Gusakov	1	-14/+104
	Add dummy driver for wl18xx PCM. Update dtb's. Update pulseaudio config. Also add ofono-test.
2017-08-10	KF: fix DU RGB flickering, remove SDR50/104	Vladimir Barinov	1	-2/+2
	1) fix DU RGB port flickeringby presclaing clock in VC5 2) limit clock for DU RGB in driver adv7511 to 100Mhz this is according to Gen3 manual limitation for this DU port 3) update README 4) remove SDR50/104 from onboard KF
2017-08-09	KF: ADV7511 edid fixes, i2c2 speed 400khz, hsusb ws2.0 enable	Vladimir Barinov	1	-20/+28
	1) fix edid get via adv7511 2) increase i2c2 speed from 100 to 400khz sine #1 fixed 3) enable hsusb for H3 ws2.0
2017-08-07	KF: Add SDR50/104 for SDHI3	Vladimir Barinov	1	-1/+3
	SDR50/104 needs to set explicitly.
2017-08-02	Kingfisher: BT: use proper way to get shutdown gpio	Andrey Gusakov	1	-9/+9

2017-08-02	ADAS boards: fix ssi012(3)9 pinmuxex on H3 and M3	Andrey Gusakov	1	-3/+3
	H3 has ssi01239_ctrl group M3 has ssi0129_ctrl group
2017-07-29	ADAS boards: separate V0/V1 and V3 (default) KF boards	Vladimir Barinov	1	-1438/+6627

2017-07-28	Kingfisher: BT: fix RTS/CTS and firmware path	Andrey Gusakov	1	-8/+8

2017-07-27	LVDS: optional compilation for Cogent firmware	Vladimir Barinov	1	-22/+101
	This allows to use Cogent generated frimware for LVDS cameras (ov490+0v10640).
2017-07-15	lvds/VB/KF, cma memory	Vladimir Barinov	1	-67/+152
	- KF: set max9286 i2c address to 0x2c - disable eMMC on r8a7795-es1 - max7325: initialize pins to output-low - enlarge cma memory region on ulcb
2017-07-14	Kingfisher: Fix BT speed	Vladimir Barinov	1	-21/+3
	- enable SCI DMA in kernel config - Kingfisher: enable 3,3M baud rate
2017-07-14	add ov5642, fix DVP in VIN	Vladimir Barinov	1	-19/+180
	- add ov5642 driver - fix parallel interfacein VIN - enable CMOS cameras on Kingfisher
2017-07-14	KF: enable SAM	Vladimir Barinov	1	-3/+39
	This enables iPod Authentication chip
2017-07-14	KF: ADV7511 EDID read workaround	Vladimir Barinov	1	-3/+3
	At 400kHZ the EDID may be read with error
2017-07-14	Kingfisher: SSI, IIO update	Vladimir Barinov	1	-73/+37
	- change differnet sensor driver - share ssi8
2017-07-14	Pack patches: put all ADAS boards patches on one	Vladimir Barinov	1	-0/+13640