| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2017-08-09 | KF: ADV7511 edid fixes, i2c2 speed 400khz, hsusb ws2.0 enable |   Vladimir Barinov | 2 | -20/+81 | |
| 1) fix edid get via adv7511 2) increase i2c2 speed from 100 to 400khz sine #1 fixed 3) enable hsusb for H3 ws2.0 | |||||
| 2017-08-07 | KF: Add SDR50/104 for SDHI3 | Vladimir Barinov | 1 | -1/+3 | |
| SDR50/104 needs to set explicitly. | |||||
| 2017-08-06 | LVDS: workaroundpatch is not needed anymore | Vladimir Barinov | 1 | -28/+0 | |
| optional compilation for Cogent firmware is not needed anymore since driver supports both firmware: Cogent and Vendor | |||||
| 2017-08-06 | Gen3: LVDS: fix RDCAM21/24 firmware | Vladimir Barinov | 1 | -1/+7 | |
| 1) This fixes/allows to use both Cogent and vendor firmware 2) this fixes dark envionment show: only for vendor f/w since EMB line is enabled but not showed in frame. Sensor EMB line is used in ISP. | |||||
| 2017-08-02 | Kingfisher: BT: use proper way to get shutdown gpio |   Andrey Gusakov | 2 | -9/+70 | |
| 2017-08-02 | ADAS boards: fix ssi012(3)9 pinmuxex on H3 and M3 | Andrey Gusakov | 1 | -3/+3 | |
| H3 has ssi01239_ctrl group M3 has ssi0129_ctrl group | |||||
| 2017-08-01 | Kingfisher: fixes for bluetooth audio | Andrey Gusakov | 1 | -0/+3 | |
| 2017-07-31 | VIN: fix S_SELECTION (S_CROP IOCTL) | Vladimir Barinov | 1 | -0/+67 | |
| 2017-07-29 | ADAS boards: separate V0/V1 and V3 (default) KF boards | Vladimir Barinov | 1 | -1438/+6627 | |
| 2017-07-29 | LVDS cameras: fix typo | Vladimir Barinov | 1 | -2/+2 | |
| 2017-07-28 | Kingfisher: BT: fix RTS/CTS and firmware path | Andrey Gusakov | 1 | -8/+8 | |
| 2017-07-28 | Kingfisher V3: update m-channel sound support | Andrey Gusakov | 2 | -315/+44 | |
| On V3 m-channel codec is moved to SSI34, so only minor update of sound driver is necessary. | |||||
| 2017-07-27 | LVDS: optional compilation for Cogent firmware | Vladimir Barinov | 2 | -22/+129 | |
| This allows to use Cogent generated frimware for LVDS cameras (ov490+0v10640). | |||||
| 2017-07-27 | Kingfisher V3 update | Vladimir Barinov | 1 | -0/+107 | |
| - correct SDHI3 for uhs mode enabled - add regulators to pcie-rcar - enable rpi camera | |||||
| 2017-07-27 | TTA-RDRIVE: remove unused patch | Vladimir Barinov | 1 | -1314/+0 | |
| 2017-07-15 | lvds/VB/KF, cma memory | Vladimir Barinov | 4 | -67/+268 | |
| - KF: set max9286 i2c address to 0x2c - disable eMMC on r8a7795-es1 - max7325: initialize pins to output-low - enlarge cma memory region on ulcb | |||||
| 2017-07-14 | Kingfisher: Fix BT speed | Vladimir Barinov | 3 | -21/+5 | |
| - enable SCI DMA in kernel config - Kingfisher: enable 3,3M baud rate | |||||
| 2017-07-14 | ov490 switch to vendor's firmware, OV495 OTP ID | Vladimir Barinov | 1 | -87/+76 | |
| 1) This adds default RDCAM21/RDCAM24 firmware: /usr/share/factory/rcarm21.rdcam24.1280x1080@30.bin If firmware flashed with Cogent samples then it is possible to rollback using script: /usr/share/factory/rdcam21.rdcam24.1280x1080@30.bin ov495: change YUYV -> UYVY ti964/ti954: use FSIN reference clock from camera port0 2) Add ov495 OTP ID | |||||
| 2017-07-14 | add ov5642, fix DVP in VIN | Vladimir Barinov | 5 | -19/+2423 | |
| - add ov5642 driver - fix parallel interfacein VIN - enable CMOS cameras on Kingfisher | |||||
| 2017-07-14 | Add EDT FT5X06 driver | Vladimir Barinov | 1 | -0/+1 | |
| 2017-07-14 | KF: enable SAM | Vladimir Barinov | 1 | -3/+39 | |
| This enables iPod Authentication chip | |||||
| 2017-07-14 | KF: fix high rate renedering on adv7511 | Vladimir Barinov | 1 | -0/+26 | |
| LVDS DU does not support high freq | |||||
| 2017-07-14 | KF: ADV7511 EDID read workaround | Vladimir Barinov | 1 | -3/+3 | |
| At 400kHZ the EDID may be read with error | |||||
| 2017-07-14 | ti9x4: fix FSIN | Vladimir Barinov | 1 | -6/+6 | |
| 2017-07-14 | Kingfisher: SSI, IIO update | Vladimir Barinov | 1 | -73/+37 | |
| - change differnet sensor driver - share ssi8 | |||||
| 2017-07-14 | Pack patches: put all ADAS boards patches on one | Vladimir Barinov | 15 | -13979/+13640 | |
| 2017-07-13 | Kingfisher: add multichannel audio, IMU driver | Vladimir Barinov | 5 | -26/+1784 | |
| - Fix multichannel in rcar sound (optional compilation) - add IMU driver - enable new sensor drivers - enalbe v3 usb3.0 firmware - deploy Videobox dtb files | |||||
| 2017-07-13 | add H3 Videobox board | Vladimir Barinov | 1 | -0/+4140 | |
| 2017-07-10 | I2C switch: fix PCA954x i2c expander access | Vladimir Barinov | 1 | -0/+51 | |
| 2017-07-05 | HAD: add missed serial alias for console | Vladimir Barinov | 2 | -2/+4 | |
| 2017-06-04 | [kernel] Enable dummy interface |   Grigory Kletsko | 4 | -0/+4 | |
| 2017-06-02 | Kingfisher: add ability to use SD on SDHI3 | Vladimir Barinov | 3 | -21/+93 | |
| 2017-06-01 | Kinfgisher: add USB modem, RaspberryPi camera | Vladimir Barinov | 6 | -22/+1211 | |
| 2017-05-30 | Kingfisher V1 update | Vladimir Barinov | 9 | -51/+1128 | |
| 2017-05-25 | Add CAN/CANFD/XHCI, fix build for CANFD | Vladimir Barinov | 7 | -24/+179 | |
| 2017-05-24 | Fix build after adding KF V1 | Vladimir Barinov | 5 | -5/+5 | |
| 2017-05-24 | Kingfisher M3: fix typo | Vladimir Barinov | 1 | -7/+1 | |
| 2017-05-24 | LVDS cameras enumeration fix | Vladimir Barinov | 1 | -4/+4 | |
| GPIO needs to be released by deserializer | |||||
| 2017-05-24 | Add KF V1 board | Vladimir Barinov | 4 | -402/+867 | |
| 2017-05-22 | ov490: add FSIN, NOEMB to avoid firmware relfash | Vladimir Barinov | 1 | -4/+53 | |
| This allows to skip reflashing of vendors (default) firmware to have LVDS cameras functional on ADAS boards | |||||
| 2017-05-22 | csi2: fix RCAR H3 ws2.0 freq pll | Vladimir Barinov | 1 | -20/+100 | |
| 2017-05-17 | Initial commit for ADAS boards support in 2.19.0 | Vladimir Barinov | 45 | -0/+33150 | |
 |
index : meta-renesas-rcar-gen3 | |
| Grokmirror user |
| summaryrefslogtreecommitdiffstats |