meta-renesas-rcar-gen3 -

Age	Commit message (Collapse)	Author	Files	Lines
2017-08-28	Add V3MSK and deploy legacy KF images	Vladimir Barinov	1	-0/+14

2017-08-26	Add V3M Eagle machine	Vladimir Barinov	1	-0/+2

2017-08-15	revert gpio-max732x-set-gpio-ouput-low-at-init	Vladimir Barinov	1	-1/+0
	This patch introduces bug
2017-08-11	Gen3: disable autosuspend for SMSC usb hubs	Vladimir Barinov	1	-0/+1
	Thisis a workaround for R-Car Gen3 XHCI
2017-08-10	Kingfisher: enable PCM audio between CPU and BT module	Andrey Gusakov	1	-0/+1
	Add dummy driver for wl18xx PCM. Update dtb's. Update pulseaudio config. Also add ofono-test.
2017-08-10	KF: fix DU RGB flickering, remove SDR50/104	Vladimir Barinov	1	-0/+2
	1) fix DU RGB port flickeringby presclaing clock in VC5 2) limit clock for DU RGB in driver adv7511 to 100Mhz this is according to Gen3 manual limitation for this DU port 3) update README 4) remove SDR50/104 from onboard KF
2017-08-09	Sound: ak4613: suppress warning during pulseaudio probe	Andrey Gusakov	1	-0/+1

2017-08-09	KF: ADV7511 edid fixes, i2c2 speed 400khz, hsusb ws2.0 enable	Vladimir Barinov	1	-0/+1
	1) fix edid get via adv7511 2) increase i2c2 speed from 100 to 400khz sine #1 fixed 3) enable hsusb for H3 ws2.0
2017-08-06	LVDS: workaroundpatch is not needed anymore	Vladimir Barinov	1	-1/+0
	optional compilation for Cogent firmware is not needed anymore since driver supports both firmware: Cogent and Vendor
2017-08-02	Kingfisher: BT: use proper way to get shutdown gpio	Andrey Gusakov	1	-0/+1

2017-08-01	Fix build error: kf-v1 does not present anymore	Vladimir Barinov	1	-3/+0

2017-07-31	VIN: fix S_SELECTION (S_CROP IOCTL)	Vladimir Barinov	1	-0/+1

2017-07-28	Kingfisher V3: update m-channel sound support (fix)	Andrey Gusakov	1	-1/+0

2017-07-28	Kingfisher V3: update m-channel sound support	Andrey Gusakov	1	-0/+1
	On V3 m-channel codec is moved to SSI34, so only minor update of sound driver is necessary.
2017-07-27	LVDS: optional compilation for Cogent firmware	Vladimir Barinov	1	-0/+1
	This allows to use Cogent generated frimware for LVDS cameras (ov490+0v10640).
2017-07-27	Kingfisher V3 update	Vladimir Barinov	1	-0/+1
	- correct SDHI3 for uhs mode enabled - add regulators to pcie-rcar - enable rpi camera
2017-07-15	lvds/VB/KF, cma memory	Vladimir Barinov	1	-0/+3
	- KF: set max9286 i2c address to 0x2c - disable eMMC on r8a7795-es1 - max7325: initialize pins to output-low - enlarge cma memory region on ulcb
2017-07-14	add ov5642, fix DVP in VIN	Vladimir Barinov	1	-1/+3
	- add ov5642 driver - fix parallel interfacein VIN - enable CMOS cameras on Kingfisher
2017-07-14	KF: fix high rate renedering on adv7511	Vladimir Barinov	1	-0/+1
	LVDS DU does not support high freq
2017-07-14	Pack patches: put all ADAS boards patches on one	Vladimir Barinov	1	-14/+3

2017-07-13	Kingfisher: add multichannel audio, IMU driver	Vladimir Barinov	1	-0/+5
	- Fix multichannel in rcar sound (optional compilation) - add IMU driver - enable new sensor drivers - enalbe v3 usb3.0 firmware - deploy Videobox dtb files
2017-07-13	add H3 Videobox board	Vladimir Barinov	1	-0/+1

2017-07-10	I2C switch: fix PCA954x i2c expander access	Vladimir Barinov	1	-0/+1

2017-06-01	Kinfgisher: add USB modem, RaspberryPi camera	Vladimir Barinov	1	-0/+1

2017-05-30	Kingfisher V1 update	Vladimir Barinov	1	-0/+4

2017-05-25	KF V1 deploy dtb images	Vladimir Barinov	1	-0/+3

2017-05-24	Add KF V1 board	Vladimir Barinov	1	-0/+1

2017-05-19	uboot: add Hyperflash access	Vladimir Barinov	1	-0/+1

2017-05-17	Fix dtb list	Vladimir Barinov	1	-2/+1

2017-05-17	Initial commit for ADAS boards support in 2.19.0	Vladimir Barinov	1	-0/+75