| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2018-03-13 | AR0132: add FLIP fix |   Vladimir Barinov | 1 | -1/+1 | |
| 2018-03-12 | Add V3H VIP devices support. |   Andrey Dolnikov | 4 | -0/+197 | |
| 2018-03-07 | VB2: enable USB23 (labeled "USB2") on H3 ES20 |   Andrey Gusakov | 1 | -5/+31 | |
| On ES1.1 this port is USB3.0. On ES2.0 this port is USB2.0 | |||||
| 2018-02-26 | V3H: Add VideoBoxMini and VideoBoxMini V2 boards | Vladimir Barinov | 3 | -6/+607 | |
| This adds V3HSK exapsion boards | |||||
| 2018-02-26 | V3MZF: add eMMC in kernel | Vladimir Barinov | 1 | -6/+44 | |
| 2018-02-26 | Enable thermal sensor driver for V3M | Andrey Dolnikov | 1 | -0/+1 | |
| 2018-02-26 | Fix typo | Vladimir Barinov | 1 | -1/+1 | |
| This fixes the typo during patch update | |||||
| 2018-02-26 | V3M Eagle: remove du_pins htat are not used | Vladimir Barinov | 1 | -8/+1 | |
| Remove dependencey on RGB pins since theare are not used on Eagle board. The LVDS interface is used. | |||||
| 2018-02-26 | Add V3H Starter Kit board | Vladimir Barinov | 4 | -6/+421 | |
| This adds V3H Starter Kit board support | |||||
| 2018-02-26 | V3M: Support ES1.0 SoC | Vladimir Barinov | 2 | -18/+325 | |
| 2018-02-26 | V3M VideoBoxMiniV2: set POCx-gpios instead POCx-gpio | Vladimir Barinov | 1 | -4/+4 | |
| It is already used for all POCx-gpios and not POCx-gpio. Both are functonal for 1 gpio used. This change just syncs with others. | |||||
| 2018-02-26 | V3M VidoeoBoxMiniV2: user proper compatible | Vladimir Barinov | 1 | -1/+1 | |
| the "spidev" is prohibbited to use for binding | |||||
| 2018-02-26 | V3MSK: add PMIC | Vladimir Barinov | 1 | -5/+36 | |
| This add DA9063 PMIC on V3MSK I2C0 bus | |||||
| 2018-02-26 | V3MSK and Condor have 2GB memory | Vladimir Barinov | 1 | -2/+2 | |
| 2018-02-26 | IMR: push rotation-scaling-enable flag up | Vladimir Barinov | 1 | -1/+1 | |
| The flag number 8 is already busy with another option, hence push RSE flag up | |||||
| 2018-02-26 | V3M/V3H: sysc workaround for power down, cpu clock fixup | Vladimir Barinov | 5 | -78/+460 | |
| This adds SYSC workaround for power domains power down sequence on V3M/V3H and add cpu clock fixup on V3H. Also add VisionIP nodes and fix VSP i/f on V3H | |||||
| 2018-02-26 | V3M VBM V2: deploy dtb | Vladimir Barinov | 1 | -0/+1 | |
| Deploy dtb file for V3M VideoBoxMini V2 board | |||||
| 2018-02-26 | V3M Eagle: add PMIC | Vladimir Barinov | 2 | -4/+39 | |
| This adds PMIC devices (regulator,wdt,rtc) on Eagle | |||||
| 2018-02-26 | Adds RSE support for V3H IMR | Vladimir Barinov | 3 | -1/+331 | |
| This adds RSE support for V3H IMR | |||||
| 2018-02-26 | Add V3M based Video Box Mini V2 board | Vladimir Barinov | 2 | -39/+126 | |
| This cleans up VideoBoxMini board and add VideoBoxMini V2 board | |||||
| 2018-02-26 | Add OV2775 camera | Vladimir Barinov | 1 | -55/+2425 | |
| This adds OV2775 sensor connected to TI953 seriliazer | |||||
| 2018-02-26 | VideoBoxMini: fix POC sequence typos | Vladimir Barinov | 1 | -6/+6 | |
| This fixes POC sequence on following boards: - V3MSK + VideoBoxMini - ULCB + VideoBoxMini | |||||
| 2018-02-26 | Fix merge conflict | Vladimir Barinov | 1 | -1/+1 | |
| Fix build fail | |||||
| 2018-02-26 | Add V3MZF target | Vladimir Barinov | 3 | -0/+31 | |
| 2018-02-26 | Fix Kingfisher regulator | Vladimir Barinov | 2 | -54/+0 | |
| The patch 0035-* breaks regulators on KF board. As a result the Multichannal audio was broken | |||||
| 2018-02-26 | LVDS: move from poc-supply to poc-gpios | Vladimir Barinov | 2 | -494/+163 | |
| Use gpiod instead of gpio regulator in LVDS drivers This is ruquired to remove patch: 0035-regulator-fixed-probe-after-i2c.patch The above patch breaks regulators support on Kingfisher board | |||||
| 2018-02-26 | LVDS: remove helper patches for vendor cameras | Vladimir Barinov | 4 | -1038/+0 | |
| Remove these helper patches since it is possible to adjust cameras feature in kernel command line now | |||||
| 2018-02-26 | LVDS: unify TI9X4 deserilalizers family, add V3MZF board | Vladimir Barinov | 7 | -1674/+1705 | |
| 1) unify TI9X4 deseializers (TI954, TI964) 2) add V3MZF board 3) shorten deserilziers name in Kconfig/Makefile 4) add camera sensor AR0220 | |||||
| 2018-02-01 | VB2: add MCP251X driver for can2 and can3 | Andrey Gusakov | 1 | -0/+1 | |
| 2018-02-01 | VB2: add rtc dts node | Andrey Gusakov | 1 | -6/+10 | |
| 2018-01-31 | H3 ws2.0: fix ssi349 name | Vladimir Barinov | 2 | -0/+29 | |
| This is tested on KF + H3 ws2.0 | |||||
| 2018-01-31 | V3M/H: fix IMP resources | Vladimir Barinov | 2 | -21/+53 | |
| Fix IMP sizes/names/sysc Add new IMP blocks | |||||
| 2018-01-28 | LVDS: add poc-delay dts field | Vladimir Barinov | 1 | -37/+71 | |
| 1) add poc-delay field that introduces extra delay after apply POC-supply power. Default value is 50ms 2) add stability fixes for AP0101-AR014x cameras: read OTP_ID runtime (do not use cached value at kernel boot time, since it may read unstable/incorrectly) | |||||
| 2018-01-28 | Use POC-supply in VB, VB2 based board | Vladimir Barinov | 1 | -214/+308 | |
| 1) replace gpio-hog power with POC-supply regulator on VideoBox and VideoBox2 boards 2) remove sensor-delay filed form dts if it is 0 and if it is replaced with POC-supply | |||||
| 2018-01-25 | V3H: Add GETHER | Vladimir Barinov | 3 | -96/+278 | |
| 1) Add GETHER in uboot/kernel 2) Condor board: setup as default interface | |||||
| 2018-01-24 | SPI slave: fix WARN message | Vladimir Barinov | 3 | -28/+1 | |
| This fixes warn message form spidev driver | |||||
| 2018-01-23 | [linux-renesas] add support MD and RAID devices into ulcb config |   Roman Meshkevich | 1 | -0/+3 | |
| 2018-01-23 | OV490-OV10640: add module params | Vladimir Barinov | 1 | -31/+35 | |
| 1) add dvp_order module parameter 2) add max_height, max_width params This will allow override default dts params using kernel command line: f.e.: " ov106xx.dvp_order=2" or " ov106xx.max_width=1280 ov106xx.max_height=966 max9286.gpio_resetb=4 max9286.active_low_resetb=1 max9286.fsync_period=3200000" | |||||
| 2018-01-23 | MSIOF: add SPIDEV function | Vladimir Barinov | 11 | -6/+4348 | |
| 1) add spidev function on MSIOF 2) set MSOIF1 master and MSIOF slave on V3MSK VideoBoxMini | |||||
| 2018-01-22 | V3M/V3H: fix CMT0 timer offset | Vladimir Barinov | 2 | -4/+4 | |
| 2018-01-22 | Add V3H support and Condor board | Vladimir Barinov | 6 | -8/+7189 | |
| 1) add uboot R-Car V3H SoC (r87798) and V3H based Condor board 2) add kernel R-Car V3H SoC (r87798) and V3H based Condor board | |||||
| 2018-01-22 | Eagle: remove USB_PEAK from kernel config | Vladimir Barinov | 1 | -1/+0 | |
| Remove this since Eagle does not have USB | |||||
| 2018-01-22 | V3M: enable TMU, CMT timers in kernel, add tmu0 timer | Vladimir Barinov | 1 | -2/+5 | |
| 1) enable in kernel TMU,CMT timers via Kconfig 2) add missed timer tmu0 | |||||
| 2018-01-20 | VideoBox2: I2C, SATA, CAN fixes | Vladimir Barinov | 1 | -41/+21 | |
| 1) remove dallas rtc since conflicts address with clk generator on ULCB at 0x68 2) remove sata 3) fix can: add termination resistor and pull-ups | |||||
| 2018-01-20 | AP0101-AR014x: add OTP IDs | Vladimir Barinov | 1 | -4/+49 | |
| This adds reading fused from AR014x sensors | |||||
| 2018-01-19 | LVDS cameras: fix MAX96705+AP0101 cameras | Vladimir Barinov | 1 | -17/+33 | |
| 1) Fix AP0101+MAX96705 cameras by control FSINC These cameras require GMSL inititialization only with FSYNC disabled 2) add more module options: gpio_resetb and active_low_resetb 3) change automatic buffer fsync_mode_default to static | |||||
| 2018-01-19 | V3M kernel: Add TMU, TMU, CMT, Eagle CANFD, themal | Vladimir Barinov | 2 | -16/+236 | |
| This add timers: TMU, TPU, CMT Fix V3M thermal sensor Add CANFD on Eagle board | |||||
| 2018-01-18 | Deploy VideoBox2 DTB images | Vladimir Barinov | 1 | -0/+2 | |
| 2018-01-18 | ULCB: add kernel drivers in config for VideoBox2 | Vladimir Barinov | 1 | -0/+5 | |
| 2018-01-18 | Add VideoBox2 ADAS board | Vladimir Barinov | 1 | -17/+1981 | |
 |
index : meta-renesas-rcar-gen3 | |
| Grokmirror user |
| summaryrefslogtreecommitdiffstats |