Age | Commit message (Collapse) | Author | Files | Lines |
|
Remove these helper patches since it is possible to
adjust cameras feature in kernel command line now
|
|
1) unify TI9X4 deseializers (TI954, TI964)
2) add V3MZF board
3) shorten deserilziers name in Kconfig/Makefile
4) add camera sensor AR0220
|
|
|
|
|
|
|
|
This is tested on KF + H3 ws2.0
|
|
Fix IMP sizes/names/sysc
Add new IMP blocks
|
|
1) fix Eagle reset
2) add Condor Micrel PHY reset at startup
3) fix Eagle eMMC (expansion board with emmc 1.8V)
4) remove unused stuff
|
|
1) add poc-delay field that introduces extra delay after apply
POC-supply power. Default value is 50ms
2) add stability fixes for AP0101-AR014x cameras:
read OTP_ID runtime (do not use cached value at kernel boot time,
since it may read unstable/incorrectly)
|
|
1) replace gpio-hog power with POC-supply regulator on
VideoBox and VideoBox2 boards
2) remove sensor-delay filed form dts if it is 0 and if it
is replaced with POC-supply
|
|
Condor eMMC power is 1.8V by default.
This sets pingroup POC voltage to 1.8V
|
|
1) Add GETHER in uboot/kernel
2) Condor board: setup as default interface
|
|
This fixes warn message form spidev driver
|
|
This fixes broken build on V3MSK and Eagle caused by uboot changes
after adding V3H platform
|
|
|
|
1) add dvp_order module parameter
2) add max_height, max_width params
This will allow override default dts params using kernel command line:
f.e.:
" ov106xx.dvp_order=2"
or
" ov106xx.max_width=1280 ov106xx.max_height=966 max9286.gpio_resetb=4 max9286.active_low_resetb=1 max9286.fsync_period=3200000"
|
|
1) add spidev function on MSIOF
2) set MSOIF1 master and MSIOF slave on V3MSK VideoBoxMini
|
|
1) revert ssh-server-openssh isnce conflicts with dropbear
2) add spidev_test
|
|
1) add ssh-server-openssh for all target images (including minimal)
2) add git, svn, nano, vim, cmake
3) remove doubled string in package list
|
|
|
|
1) add uboot R-Car V3H SoC (r87798) and V3H based Condor board
2) add kernel R-Car V3H SoC (r87798) and V3H based Condor board
|
|
|
|
Remove this since Eagle does not have USB
|
|
1) enable in kernel TMU,CMT timers via Kconfig
2) add missed timer tmu0
|
|
|
|
Repository (https://github.com/renesas-rcar/gst-plugin-vspfilter/commits/RCAR-GEN3/1.0.0)
has several impotant commit that improves vsp format handling ...
|
|
1) remove dallas rtc since conflicts address with clk generator on ULCB at 0x68
2) remove sata
3) fix can: add termination resistor and pull-ups
|
|
This adds reading fused from AR014x sensors
|
|
|
|
|
|
1) Fix AP0101+MAX96705 cameras by control FSINC
These cameras require GMSL inititialization only with FSYNC disabled
2) add more module options: gpio_resetb and active_low_resetb
3) change automatic buffer fsync_mode_default to static
|
|
This add timers: TMU, TPU, CMT
Fix V3M thermal sensor
Add CANFD on Eagle board
|
|
|
|
|
|
|
|
This is necessary to have uinput since there is no other ability to have
input device (no USB)
|
|
|
|
This allows to use quad cameras demo on H3 and show all cameras
in equal windows
|
|
1) support AP0101+AR014x cameras
2) support DVP bus reverse inside VIN:
using kernel parameter "rcar_vin.lut_reverse=1"
This is needed for cameras that can't do bus reverse.
MAX9286 does DVP reverse and send data via CSI2.
Some cameras can't do reverse back, hence we can do revers in RCAR VIN.
This is applciable only for 8bit buses: raw8, yuyv8, rgb888
3) support serializers in HIGH-Immunity mode alighend with legacy mode.
MAX96705 can do legacy and HIM modes.
MAX9271 can do only leagacy mode.
4) support crossbar feature for MAX96705
This is DVP bus reordering in serilizer.
5) support passing kernel parameters to max9286 driver.
This allows to conect all supported cameras to ADAS boards without
changing DTS file, but add only parameters to kernel command line in uboot bootargs
F.e.:
max9286.him=1 max9286.vsync=0 max9286.fsync_period=3200000
or
max9286.vsync=0 max9286.fsync_period=2500000 rcar_vin.lut_reverse=1
The default setup (no changes needed) is for IMI RDCAM20/21 cameras.
6) change name of max9286 driver, since max96705 is also supported by
this driver:
max9286-max9271 -> max9286
|
|
This adds manual wight balance control for ov490/10640 sensor.
|
|
This avoid adding extra line in /etc/securetty for RDRIVE, since
first serial device was SCIF2 (ttySC0) and the SCIF1 is second (ttySC1).
This patch removes tty on SCIF2 and enbles only SCIF1 console.
Hene it is possible to use common ULCB rootfs without changing of securetty.
|
|
RDRIVE uses console on SCIF1.
Since IPL code removed SCIF1 clock enablement then we have to
add clock enable in uboot
|
|
This update/fix ROM API table offset for V3M ws2.0
|
|
|
|
Add V3M in ATF
|
|
MAX9286 may result CSI2 stream losing the last byte.
This observed rarely with only 1 cmaera connected to quad
deserializer.
This patch fixes this issue
|
|
V3M supports up to 1000MBPS without ISP.
Add 700MBPS speed to TI96x deserializer and set
default speed in dts to 700MBPS.
|
|
This is needed for AXI bus profiling from non-secure world
|
|
|
|
|