| Age | Commit message (Collapse) | Author | Files | Lines | |
|---|---|---|---|---|---|
| 2017-08-20 | LVDS: fix camera startup |   Vladimir Barinov | 1 | -40/+54 | |
| This fixes race condition between camera firmware start and driver initialization. | |||||
| 2017-08-16 | Add V3MSK Kingfisher board support | Vladimir Barinov | 1 | -2/+552 | |
| 2017-08-16 | Typo fixes | Vladimir Barinov | 3 | -3/+3 | |
| 2017-08-15 | KF: use ulcb-kf.dtsi | Vladimir Barinov | 1 | -5318/+2176 | |
| Use one dtsi file for both h3/m3ulcb kingfisher boards | |||||
| 2017-08-15 | revert gpio-max732x-set-gpio-ouput-low-at-init | Vladimir Barinov | 1 | -1/+0 | |
| This patch introduces bug | |||||
| 2017-08-15 | r8a7797: add V3MSK board, correct V3M Eagle dts | Vladimir Barinov | 2 | -81/+326 | |
| 2017-08-14 | r8a7797: fix csi2 node name | Vladimir Barinov | 1 | -1/+1 | |
| 2017-08-14 | Eagle r8a7797 support, adv7511 clock rate fixes | Vladimir Barinov | 3 | -194/+1002 | |
| 1) support Eagle r8a7797 2) propagate max clock rate set for adv7511 via dts: Eagle and Kingfisher use ADV7511 KF rate 100Mhz Eagle rate 166Mhz | |||||
| 2017-08-11 | Gen3: disable autosuspend for SMSC usb hubs | Vladimir Barinov | 2 | -0/+52 | |
| Thisis a workaround for R-Car Gen3 XHCI | |||||
| 2017-08-11 | Add recipe for libmediactl-v4l2 | Vladimir Barinov | 2 | -1/+18 | |
| This is V4L2 media controller support library which is used by surroundview | |||||
| 2017-08-10 | Kingfisher: enable PCM audio between CPU and BT module |   Andrey Gusakov | 6 | -14/+237 | |
| Add dummy driver for wl18xx PCM. Update dtb's. Update pulseaudio config. Also add ofono-test. | |||||
| 2017-08-10 | KF: fix DU RGB flickering, remove SDR50/104 | Vladimir Barinov | 5 | -3/+200 | |
| 1) fix DU RGB port flickeringby presclaing clock in VC5 2) limit clock for DU RGB in driver adv7511 to 100Mhz this is according to Gen3 manual limitation for this DU port 3) update README 4) remove SDR50/104 from onboard KF | |||||
| 2017-08-09 | sound: fixes and improvements | Andrey Gusakov | 4 | -101/+29 | |
| PulseAudio: use one config for all boards PulseAudio: fix config files installation ofono: install ofono for HSP and HFP functionality gstreamer: install pulseaudio stuff | |||||
| 2017-08-09 | Sound: ak4613: suppress warning during pulseaudio probe | Andrey Gusakov | 2 | -0/+61 | |
| 2017-08-09 | KF: ADV7511 edid fixes, i2c2 speed 400khz, hsusb ws2.0 enable | Vladimir Barinov | 3 | -20/+82 | |
| 1) fix edid get via adv7511 2) increase i2c2 speed from 100 to 400khz sine #1 fixed 3) enable hsusb for H3 ws2.0 | |||||
| 2017-08-07 | KF: Add SDR50/104 for SDHI3 | Vladimir Barinov | 1 | -1/+3 | |
| SDR50/104 needs to set explicitly. | |||||
| 2017-08-06 | LVDS: workaroundpatch is not needed anymore | Vladimir Barinov | 2 | -29/+0 | |
| optional compilation for Cogent firmware is not needed anymore since driver supports both firmware: Cogent and Vendor | |||||
| 2017-08-06 | Gen3: LVDS: fix RDCAM21/24 firmware | Vladimir Barinov | 1 | -1/+7 | |
| 1) This fixes/allows to use both Cogent and vendor firmware 2) this fixes dark envionment show: only for vendor f/w since EMB line is enabled but not showed in frame. Sensor EMB line is used in ISP. | |||||
| 2017-08-02 | Kingfisher: BT: use proper way to get shutdown gpio | Andrey Gusakov | 3 | -9/+71 | |
| 2017-08-02 | ADAS boards: fix ssi012(3)9 pinmuxex on H3 and M3 | Andrey Gusakov | 1 | -3/+3 | |
| H3 has ssi01239_ctrl group M3 has ssi0129_ctrl group | |||||
| 2017-08-01 | Kingfisher: install pulseaudio-bluetooth.conf in proper place | Andrey Gusakov | 1 | -1/+1 | |
| 2017-08-01 | Kingfisher: fixes for bluetooth audio | Andrey Gusakov | 4 | -6/+28 | |
| 2017-08-01 | Fix build error: kf-v1 does not present anymore | Vladimir Barinov | 1 | -3/+0 | |
| 2017-07-31 | VIN: fix S_SELECTION (S_CROP IOCTL) | Vladimir Barinov | 2 | -0/+68 | |
| 2017-07-31 | Image: install kernel-modules | Andrey Gusakov | 1 | -0/+1 | |
| 2017-07-29 | ADAS boards: separate V0/V1 and V3 (default) KF boards | Vladimir Barinov | 1 | -1438/+6627 | |
| 2017-07-29 | LVDS cameras: fix typo | Vladimir Barinov | 1 | -2/+2 | |
| 2017-07-28 | Kingfisher: WiFi: use more recent FW | Andrey Gusakov | 1 | -0/+63 | |
| 2017-07-28 | Kingfisher: BT: fix RTS/CTS and firmware path | Andrey Gusakov | 2 | -11/+11 | |
| 2017-07-28 | Kingfisher V3: update m-channel sound support (fix) | Andrey Gusakov | 1 | -1/+0 | |
| 2017-07-28 | Kingfisher V3: update m-channel sound support | Andrey Gusakov | 3 | -315/+45 | |
| On V3 m-channel codec is moved to SSI34, so only minor update of sound driver is necessary. | |||||
| 2017-07-27 | LVDS: optional compilation for Cogent firmware | Vladimir Barinov | 3 | -22/+130 | |
| This allows to use Cogent generated frimware for LVDS cameras (ov490+0v10640). | |||||
| 2017-07-27 | Kingfisher V3 update | Vladimir Barinov | 2 | -0/+108 | |
| - correct SDHI3 for uhs mode enabled - add regulators to pcie-rcar - enable rpi camera | |||||
| 2017-07-27 | TTA-RDRIVE: remove unused patch | Vladimir Barinov | 1 | -1314/+0 | |
| 2017-07-25 | Kingfisher: add BT initialization tool/service | Andrey Gusakov | 6 | -0/+278 | |
| 2017-07-25 | Kingfisher: fix radio init script | Andrey Gusakov | 1 | -6/+6 | |
| 2017-07-25 | Kingfisher: add pulseaudio | Andrey Gusakov | 10 | -0/+560 | |
| Set kingfisher in DISTRO_FEATURES to enable multichannel audio | |||||
| 2017-07-21 | arm-trusted-firmware: deploy bin files | Vladimir Barinov | 1 | -0/+5 | |
| 2017-07-17 | arm-trusted-firmware: add nonsecure hyperflash access | Vladimir Barinov | 3 | -50/+86 | |
| this fixes non-secure hyperflash access on ws2.0 | |||||
| 2017-07-15 | lvds/VB/KF, cma memory | Vladimir Barinov | 5 | -67/+271 | |
| - KF: set max9286 i2c address to 0x2c - disable eMMC on r8a7795-es1 - max7325: initialize pins to output-low - enlarge cma memory region on ulcb | |||||
| 2017-07-14 | Kingfisher: Fix BT speed | Vladimir Barinov | 3 | -21/+5 | |
| - enable SCI DMA in kernel config - Kingfisher: enable 3,3M baud rate | |||||
| 2017-07-14 | ov490 switch to vendor's firmware, OV495 OTP ID | Vladimir Barinov | 3 | -87/+82 | |
| 1) This adds default RDCAM21/RDCAM24 firmware: /usr/share/factory/rcarm21.rdcam24.1280x1080@30.bin If firmware flashed with Cogent samples then it is possible to rollback using script: /usr/share/factory/rdcam21.rdcam24.1280x1080@30.bin ov495: change YUYV -> UYVY ti964/ti954: use FSIN reference clock from camera port0 2) Add ov495 OTP ID | |||||
| 2017-07-14 | add ov5642, fix DVP in VIN | Vladimir Barinov | 6 | -20/+2426 | |
| - add ov5642 driver - fix parallel interfacein VIN - enable CMOS cameras on Kingfisher | |||||
| 2017-07-14 | Add EDT FT5X06 driver | Vladimir Barinov | 1 | -0/+1 | |
| 2017-07-14 | KF: enable SAM | Vladimir Barinov | 1 | -3/+39 | |
| This enables iPod Authentication chip | |||||
| 2017-07-14 | KF: fix high rate renedering on adv7511 | Vladimir Barinov | 2 | -0/+27 | |
| LVDS DU does not support high freq | |||||
| 2017-07-14 | KF: ADV7511 EDID read workaround | Vladimir Barinov | 1 | -3/+3 | |
| At 400kHZ the EDID may be read with error | |||||
| 2017-07-14 | ti9x4: fix FSIN | Vladimir Barinov | 1 | -6/+6 | |
| 2017-07-14 | Kingfisher: SSI, IIO update | Vladimir Barinov | 1 | -73/+37 | |
| - change differnet sensor driver - share ssi8 | |||||
| 2017-07-14 | Pack patches: put all ADAS boards patches on one | Vladimir Barinov | 16 | -13993/+13643 | |
 |
index : meta-renesas-rcar-gen3 | |
| Grokmirror user |
| summaryrefslogtreecommitdiffstats |
path: root/meta-rcar-gen3-adas