Age | Commit message (Collapse) | Author | Files | Lines |
|
This sets PREFERRED_VERSION_libdrm to 2.4.100.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
Change-Id: I5475418c4d255dc55fa03693d7e0d8a1f4d16718
|
|
SERIAL_CONSOLE has been dropped since YP2.7, this commit replaces its
instances in meta-renesas by SERIAL_CONSOLES.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
Change-Id: Id30d2e0db0ef8d0dd896c2daed340fcbe8f0f81f
|
|
This commit updates machine configurations for the following items:
- Upgraded u-boot to v2018.09.
- Added supporting Ebisu 4D 2GiB board.
- Enabled building multiple u-boot configurations for H3 Salvator-XS,
Ebisu and H3ULCB.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
The kernel-module-gles is now using sync command to ensure installed
files get written to disk.
This commit adds sync to HOSTTOOLS to make sure that command is
available when installing this module.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
From Yv3.7.0, there are 03 options to build u-boot/IPL for H3:
- For R-Car H3 SiP DDR 8GiB (2GiB x 4ch) [1]
- For R-Car H3 SiP DDR 4GiB (2GiB x 2ch) [2]
- For R-Car H3 SiP DDR 4GiB (1GiB x 4ch) [3]
This commit adds a variable into sample configurations to control the
build option:
- For [1]: H3_OPTION = "1" (default)
- For [2]: H3_OPTION = "2"
- For [3]: H3_OPTION = "0"
It also adds H3_OPTION = "0" for H3ULCB by default.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
cpio.gz has a limitation about size. If rootfs size is larger than
2GB, do_image_cpio will fail. Therefore, this commit removes
cpio.gz in our implementation.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
mesa v17.1.1 only supports libdrm from 2.4.75 and later,
so we set PREFERRED_VERSION_libdrm in board config
to use libdrm v2.4.85 from poky to prevent configure error.
| checking for libdrm >= 2.4.75... no
| checking for glproto >= 1.4.14... yes
| configure: error: Direct rendering requires libdrm >= 2.4.75
| NOTE: The following config.log files may provide further information.
| NOTE: /build/tmp/work/aarch64-poky-linux/mesa/2_17.1.1-r0/build/config.log
| ERROR: configure failed
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Board configs should append to previously set IMAGE_FSTYPES
instead of overriding it.
Change-Id: If5101784f574a96185351e96b7c0cbd120fd90dc
Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com>
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
(cherry picked from commit b4c458d529bfad0bd85c282912d3a237c8a3ebfb)
|
|
The SOC_FAMILY is already different between H3ULCB and M3ULCB:
H3ULCB uses SoC r8a7795.
M3ULCB uses SoC r8a7796.
Hence, setting this value in h3ulcb.conf and m3ulcb.conf to allow
images to be built without setting SOC_FAMILY in local.conf.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
H3ULCB will support new board with chip WS2.0.
There will be 2 device trees for H3ULCB corresponding to 2 board types:
- r8a7795-es1-h3ulcb.dtb: for H3ULCB WS1.1
- r8a7795-h3ulcb.dtb: for H3ULCB WS2.0
Change-Id: Ic11ee3f3e734641b020e3332721babd465cce2ae
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit addes "ulcb" into MACHINEOVERRIDES.
"ulcb" contains h3ulcb and m3ulcb.
It will help the implementation in the future
become easier to maintain for ULCB group.
Change-Id: I3c5d66f1e36e85f07d96a74f566fc1ffd5a76ee6
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Renesas BSP v3.5.1 (kernel v4.9 stable)
[Environment]
poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3)
meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e
meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f
[Information]
- U-boot: Changed load address from H'49000000 to H'50000000
- XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0"
- Change location of include directory, which stores common user header
files, to $(INCSHARED)
- In BSP Only, core-image-weston is not supported even though
local-wayland.conf is provided.
- Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is
 necessary to enable BKUP_TRG signal for Suspend to RAM.
- The dtb filename was changed in R-Car H3. Only
"Image-r8a7795-es1-salvator-x.dtb" is supported in this version.
Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3
WS1.0 and WS1.1.
- Please update your local.conf and bblayers.conf corresponding to Yocto
v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for
updated contents.
- You have to re-compile out-of-recipe software like user application by
v2.16.0 SDK toolchains.
- In some boards, the resuming from System Suspend to RAM may cause
unstable operation or failed to resume.
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|