aboutsummaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3/conf
AgeCommit message (Collapse)AuthorFilesLines
2018-01-30rcar-gen3: linux-renesas: Upgrade Linux BSP to v3.6.0Thuy Tran3-3/+3
This commit upgrades Linux BSP to v3.6.0 for supporting Kernel v4.14 stable and updating following items: [Kernel] - Add support for WDIOF_CARDRESET. [Power Management] - Add missing iounmap to rcar_avs.c. - Add big.LITTLE CAS support. - Add CA53 CPUIdle support. - Add CA53 EMS support. - Add CA53 CPUFreq support. [Audio driver] - Confirm rmmod command operation of snd-soc-rcar. - Skip disabled-SSI nodes. - Care ssi_parent_mod and remove NULL check from rsnd_mod_name()/rsnd_mod_id(). - Revert IOMMU support so far. - Don't use runtime->sample_bits. - More clear rsnd_get_dalign() for DALIGN. - Clear SSI_MODE for non TDM Extended modes. [Display driver] - Confirm the Fence function. - Add support for colorkey alpha blending. - Disable vsp1 interrupt when startup. [DMA Engine driver] - Fix array-bounds warning refer chcr_ts[]. [PWM driver] - Enable PWM2 in device tree. [USB2.0 Function] - Fix the problem that the interrupt becomes long time when disconnecting the USB cable. [Video Capture driver] - Add V4L2_FIELD_SEQ_TB/BT function support. - Add ARGB8888 caputre format support and overflow debug message option. - Fix cropping procedure. [RWDT driver] - Add support for WDIOF_CARDRESET. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-11-24rcar-gen3: machine: Add support for M3N boardThuy Tran2-2/+20
This commit updates recipes to support for R-Car M3N board (SoC: R8A77965). The support for M3N by following items: - machine: Add support for M3N with tuning file for cortex-a57. - linux-renesas: Upgrade Linux BSP to v3.5.9. - u-boot: Add support for R-Car M3N. - IPL: Update SRCREV to follow the latest version. - README: Add M3N information. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: Correct coding style of IMAGE_FSTYPESAnton Gerasimov3-3/+3
Board configs should append to previously set IMAGE_FSTYPES instead of overriding it. Change-Id: If5101784f574a96185351e96b7c0cbd120fd90dc Signed-off-by: Anton Gerasimov <anton@advancedtelematic.com> Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh> Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit b4c458d529bfad0bd85c282912d3a237c8a3ebfb)
2017-06-21rcar-gen3: ULCB: Add default SOC_FAMILY for ULCBThao Nguyen2-0/+4
The SOC_FAMILY is already different between H3ULCB and M3ULCB: H3ULCB uses SoC r8a7795. M3ULCB uses SoC r8a7796. Hence, setting this value in h3ulcb.conf and m3ulcb.conf to allow images to be built without setting SOC_FAMILY in local.conf. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: h3ulcb: Add new device tree for H3ULCB WS2.0Yusuke Goda1-1/+4
H3ULCB will support new board with chip WS2.0. There will be 2 device trees for H3ULCB corresponding to 2 board types: - r8a7795-es1-h3ulcb.dtb: for H3ULCB WS1.1 - r8a7795-h3ulcb.dtb: for H3ULCB WS2.0 Change-Id: Ic11ee3f3e734641b020e3332721babd465cce2ae Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: linux-renesas: Upgrade Linux BSP to v3.5.3Thao Nguyen1-1/+4
This commit upgrades Linux BSP to v3.5.3 and adds device tree file for M3 Salvator-XS board to salvator-x.conf. Linux BSP to v3.5.3 updates following items: Kernel core - Add workaround for PRR register of R-Car M3 WS1.1. (Fix printing cpu info.) - Add device tree file for Salvator-XS board with R-Car M3. - Fix R-Car M3 Salvator-X device tree file for MIX function of Audio driver. Power Management - Mark the OPP to be used during system suspend. - Enable CPUIdle function. - Apply new CPUIdle parameters. Audio driver - Confirm this driver can resume with Suspend to RAM during capture. - Avoid SSI_MODEx settings for SSI8. - Clear DE bit only in PDMACHCR when it stops. - Tidyup Audio-DMAC channel for DVC. - Enable PCM RATE until 192000. - Fix the setting of saved_rate during the resume process. Display driver - Fix the problem that the flicker may occur during rendering by the application. - Add brs option check for VGA connector. - Add routing set for digital RGB previously. DMA Engine driver - Fix release resources after interrupt process. Ethernet driver - Add phy-reset-gpios. This driver can work after Suspend to RAM with Salvator-XS board. - Fix GIS_PTMF bit clearing in ravb_ptp_interrupt. I2C driver - Revert and fix about unnecessary function related to Suspend to RAM. MSIOF driver - Fix SPI division value setting of R-Car M3 based on hardware specification. - Allow interrupts during msiof slave mode transfer wait. - Revert and fix about unnecessary function related to Suspend to RAM. RWDT driver - Fix timeout count calculation. SCIF/HSCIF driver - Fix panic when serial console and DMA are enabled. - Revert about unnecessary function related to Suspend to RAM. SD/MMC driver - Wait for CBSY instead of SCLKDIVEN. - Add re-tuning condition. - Add internal DMAC reset at startup. - Add the driver strength setting. eMMC HS400 mode can work with R-Car M3 WS1.1 on Salvator-XS board. Thermal driver - Fix to support thermal for both M3 WS1.0 and WS1.1. Video Capture driver - Fix resuming procedure. - Fix first field detection control. - Fix 720x480p transfer rate. - Fix video standard selection register setting. Change-Id: I3b0d6237c9d0c56a9f2870f1fde89ea215f163cd Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-03-27rcar-gen3: ULCB: Add MACHINEOVERRIDES for ULCBYusuke Goda2-0/+4
This commit addes "ulcb" into MACHINEOVERRIDES. "ulcb" contains h3ulcb and m3ulcb. It will help the implementation in the future become easier to maintain for ULCB group. Change-Id: I3c5d66f1e36e85f07d96a74f566fc1ffd5a76ee6 Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-01-27First commit.Renesas-Yocto-v2.16.0Takamitsu Honda8-0/+176
Renesas BSP v3.5.1 (kernel v4.9 stable) [Environment] poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3) meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f [Information] - U-boot: Changed load address from H'49000000 to H'50000000 - XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0" - Change location of include directory, which stores common user header files, to $(INCSHARED) - In BSP Only, core-image-weston is not supported even though local-wayland.conf is provided. - Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is 　necessary to enable BKUP_TRG signal for Suspend to RAM. - The dtb filename was changed in R-Car H3. Only "Image-r8a7795-es1-salvator-x.dtb" is supported in this version. Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3 WS1.0 and WS1.1. - Please update your local.conf and bblayers.conf corresponding to Yocto v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for updated contents. - You have to re-compile out-of-recipe software like user application by v2.16.0 SDK toolchains. - In some boards, the resuming from System Suspend to RAM may cause unstable operation or failed to resume. Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>