aboutsummaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3/recipes-bsp/u-boot
AgeCommit message (Collapse)AuthorFilesLines
2017-11-24rcar-gen3: u-boot: Upgrade version according to Linux BSP to v3.5.9Thuy Tran1-2/+2
This commit updates u-boot according to Linux BSP v3.5.9 for supporting R-Car M3N Ver.1.0 and updating following items: - Add missing IPSR18 bits to R8A7795 PFC. - Fix unnecessary write "bus_width=1" for SDHI. U-boot config for M3N is r8a77965_salvator-x_defconfig. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: u-boot: Upgrade version according to Linux BSP to v3.5.6Thao Nguyen1-2/+2
This commit updates u-boot according to Linux BSP v3.5.6 for below fixes: - Fix u-boot reset for ULCB. - The SMSTPCR value is illegal immediately before the start of the kernel. - The following fatls command execution of usb start/stop Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: u-boot: Update u-boot to v3.5.4Thao Nguyen1-2/+2
This commit updates u-boot to BSP v3.5.4 for following changes: - Remove MSTP registers values rewriting process. - Fix multiple declarations of DECLARE_GLOBAL_DATA_PTR. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: u-boot: Upgrade u-boot to v3.5.3Thao Nguyen1-2/+2
This commit updates u-boot version corresponding to BSP v3.5.3 for following items: - Add workaround for PRR register of R-Car M3 WS1.1. (Fix printing cpu info.) - Fix USB2.0 ch2 found device for R-Car H3 WS2.0. - Revert "armv8: Add ISB after cpacr_el1 update" for I/D cache ON. Change-Id: I952aabfeec8b8518760494ba987f2cdd045b6f66 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-03-23rcar-gen3: u-boot: upgrade BSP v3.5.0 -> v3.5.2Thao Nguyen1-2/+2
This patch upgrade BSP v3.5.0 -> v3.5.2. [v3.5.2] - Fix Ethernet driver and could turn on I/D cache. Change-Id: Ic90b59ea4db549248b263eedd4fd40c865f74408 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-01-27First commit.Renesas-Yocto-v2.16.0Takamitsu Honda1-0/+27
Renesas BSP v3.5.1 (kernel v4.9 stable) [Environment] poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3) meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f [Information] - U-boot: Changed load address from H'49000000 to H'50000000 - XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0" - Change location of include directory, which stores common user header files, to $(INCSHARED) - In BSP Only, core-image-weston is not supported even though local-wayland.conf is provided. - Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is 　necessary to enable BKUP_TRG signal for Suspend to RAM. - The dtb filename was changed in R-Car H3. Only "Image-r8a7795-es1-salvator-x.dtb" is supported in this version. Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3 WS1.0 and WS1.1. - Please update your local.conf and bblayers.conf corresponding to Yocto v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for updated contents. - You have to re-compile out-of-recipe software like user application by v2.16.0 SDK toolchains. - In some boards, the resuming from System Suspend to RAM may cause unstable operation or failed to resume. Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>