| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit updates U-Boot version to 3.9.5 for the following
changes:
- Fix name to AVB_AVTP_{MATCH/CAPTURE}.
- Add DRAM 2x4G memory map support for M3 Ver.3.0 SiP.
(cherry picked from commit fd9043582dff30021c8068e91cab577518f44205)
Change-Id: I4071c3d3976a011e096482ea3adc642af9e12c19
Signed-off-by: Duy Dang <duy.dang.yw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates U-Boot SRCREV to Ver.3.9.3 for the following
changes:
- Increase off-on delay on the SD Vcc regulator.
- Fix r8a779{5,6,90} DRIF conflict names by H/W UM 1.50 errata.
- Apply upstream code related to mmc.
- Add upstream description to DT files added by BSP.
- Fix warning in writel() overflow in rcar_i2c.c.
- Set environment variable containing CPU type.
- Downgrade SD/MMC from UHS/HS200/HS400 modes before boot.
- Unmount FS in do_fs_type().
- Support up to MMC HS200 mode with U-Boot.
- Add DMA transfer address alignment check at writing.
- Fix pinctrl definition according to H/W UM Rev.1.00 and errata.
- Force mmc reinit when no card present.
- Make DMA transfer end bit configurable and add 1uS delay after DMA
completion on older IPs.
- Add function to activate with suitable DT and add Enable
MULTI_DTB_FIT.
Change-Id: I958f86c16e7558ac51b40e68f611b7f20748877c
Signed-off-by: Duy Dang <duy.dang.yw@renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
(cherry picked from commit de96e0e4738e0b473c2fb77e2384e2c516990d4d)
|
|
This commit updates do_deploy function to drop the SoC name when
deploying srec files, the purpose is to keep the legacy name of U-Boot
build results.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of U-Boot to version 3.9.1 for
the following changes:
- Generate fitting memory map on R-Car Gen3, fix protection area
access error and fix to enable icache early in R-Car Gen3.
- Add module clock stop before OS startup.
- Reorder TMIO clock handling.
- Do not issue CMD 6 on SD 1.00 and SD 1.01.
- Fix protection area access error at Cortex-A53.
- Avoid unsupported internal delay mode for R-Car E3 and limit to
100Mbps.
- Revert "net: Fix cache misalignment message after network load
operations"
- Add "usb_pgood_delay" to the default environment variable.
- Fix warning of the make W=1 C=2.
- Resolve the problem that the eMMC read of the environment setting
value may fail at startup.
- Add vbus-supply regulator support.
- Resolve the problem that the SD card (UHS, etc.) isn’t
recognized.
- Fix MOD_SEL bit numbering for R-Car E3.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xv@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates recipes to support deploying multiple u-boot
binaries of Salvator-XS, H3ULCB and Ebisu boards. It also removed
uboot-control.inc which is no longer used.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot according to BSP v3.8.0.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit backports u-boot v2018.09 upstream to Yv3.13.0.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
In the past, -fgnu89-inline flag was added to fix some
incompatibilities with GCC 5. At the moment, the issue is resolved after
upgrading to GCC 7.3.
This commit removes -fgnu89-inline flag from KCFLAGS.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot SRCREV to follow the latest version for
following updates:
- Remove MSTP initial setting value definition.
- Increase console buffer sizes.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades u-boot version corresponding to BSP v3.7.0 for
below fix:
- Fix R-Car M3 version display from Ver.1.1 to Ver.1.1/Ver.1.2.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot SRCREV to follow the latest version for
following updates:
- Fix XTAL clock for Salvator-XS board.
- Use packed structures for networking. As a result, “dcache off”
command works fine.
It also adds u-boot build options to support each H3 device trees
as below:
- For R-Car H3 SiP DDR 8GiB (2GiB x 4ch), specify RCAR_DRAM_MAP4_2.
- For R-Car H3 SiP DDR 4GiB (2GiB x 2ch), specify RCAR_DRAM_MAP2_2.
- For R-Car H3 SiP DDR 4GiB (1GiB x 4ch), specify RCAR_DRAM_MAP4_1.
In Yv3.7.0, we will support R-Car H3 SiP DDR 8GiB by default.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot SRCREV for following changes:
- Add I2C setting for reset by PMIC for E3.
- Add reset command support by using PMIC for E3.
- Fix pinmux_config_regs array for E3.
- Add clock stops before boot os for E3.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot version corresponding to BSP v3.6.0 for
below fixes:
- Add CONFIG_CMD_CACHE for enabling cache control commands.
- Fix clock bit assignment of EHCI3.
- Store last address/size/etc as ulong.
- Build warning fixes for 64-bit.
- Add CONFIG_HUSH_PARSER for enabling the "hush" shell as command
line interpreter.
- Add eMMC ver.5.1 support.
- Update MMC_ERASE argument to match Linux kernel.
- Backport for gcc 7.2.0 compiler support.
The u-boot.inc used by the bb recipe has been split into two parts
in the pyro poky meta. Adopt to the new style by providing the
missing u-boot-common*.inc file containing the license information.
Signed-off-by: Stephen Lawrence <stephen.lawrence@renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot according to Linux BSP v3.5.9 for
supporting R-Car M3N Ver.1.0 and updating following items:
- Add missing IPSR18 bits to R8A7795 PFC.
- Fix unnecessary write "bus_width=1" for SDHI.
U-boot config for M3N is r8a77965_salvator-x_defconfig.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot according to Linux BSP v3.5.6
for below fixes:
- Fix u-boot reset for ULCB.
- The SMSTPCR value is illegal immediately
before the start of the kernel.
- The following fatls command execution of usb start/stop
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot to BSP v3.5.4 for following changes:
- Remove MSTP registers values rewriting process.
- Fix multiple declarations of DECLARE_GLOBAL_DATA_PTR.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates u-boot version corresponding to BSP v3.5.3
for following items:
- Add workaround for PRR register of R-Car M3 WS1.1.
(Fix printing cpu info.)
- Fix USB2.0 ch2 found device for R-Car H3 WS2.0.
- Revert "armv8: Add ISB after cpacr_el1 update" for I/D cache ON.
Change-Id: I952aabfeec8b8518760494ba987f2cdd045b6f66
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This patch upgrade BSP v3.5.0 -> v3.5.2.
[v3.5.2]
- Fix Ethernet driver and could turn on I/D cache.
Change-Id: Ic90b59ea4db549248b263eedd4fd40c865f74408
Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Renesas BSP v3.5.1 (kernel v4.9 stable)
[Environment]
poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3)
meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e
meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f
[Information]
- U-boot: Changed load address from H'49000000 to H'50000000
- XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0"
- Change location of include directory, which stores common user header
files, to $(INCSHARED)
- In BSP Only, core-image-weston is not supported even though
local-wayland.conf is provided.
- Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is
necessary to enable BKUP_TRG signal for Suspend to RAM.
- The dtb filename was changed in R-Car H3. Only
"Image-r8a7795-es1-salvator-x.dtb" is supported in this version.
Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3
WS1.0 and WS1.1.
- Please update your local.conf and bblayers.conf corresponding to Yocto
v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for
updated contents.
- You have to re-compile out-of-recipe software like user application by
v2.16.0 SDK toolchains.
- In some boards, the resuming from System Suspend to RAM may cause
unstable operation or failed to resume.
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
Duy Dang
Duy Dang
Khang Nguyen
Khang Nguyen
Thuy Tran
Thao Nguyen
Thao Nguyen
Takamitsu Honda