summaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3/recipes-bsp
AgeCommit message (Collapse)AuthorFilesLines
2019-05-23rcar-gen3: optee-os: Update SRCREV to Rev.2.0.2Duy Dang1-1/+1
This commit updates SRCREV of optee-os to Rev.2.0.2 for the following changes: - Support HWmanual RPC errata - Delete the modification used by enabling CFG_WITH_PAGER Change-Id: I6cc14ec22556ecdaf1b59e72e4c63b6dc78083e0 Signed-off-by: Duy Dang <duy.dang.yw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit a1715e53ac2b3d6ac30e2524afdd3cdf88e9faf9)
2019-05-23rcar-gen3: arm-trusted-firmware: Update SRCREV to Rev.2.0.3Duy Dang1-1/+1
This commit updates IPL and Secure Monitor to Rev.2.0.3 for the following changes: [IPL] - Add support for M3 Ver.1.3/3.0 - Add QoS setting for M3 Ver.3.0 - Add DDR setting for M3 Ver.3.0 - Add E3 Ver.1.1 to build option - Change periodic write DQ training option - Add new board revision for H3ULCB - Remove duplicate line in qos.mk - Change subslot cycle - Update DDR setting rev.0.35 - BL2/BL31: Update IPL and Secure Monitor Rev2.0.3 - BL31: Change to restore timer counter value at resume - BL31: Add DBSC4 setting before self-refresh mode [Secure Monitor] - Add SiP for getting board ID - Change Suspend To RAM function for M3 Ver.3.0 - Change condition of product code with cluster off function Change-Id: I9eb8e11e679742cf315089670dee1ae90954fc43 Signed-off-by: Duy Dang <duy.dang.yw@renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit 74e431ec9d3ea20c91cbd2fc6199794cbe43c720)
2019-05-23rcar-gen3: u-boot: Update to version 3.9.3Duy Dang1-2/+2
This commit updates U-Boot SRCREV to Ver.3.9.3 for the following changes: - Increase off-on delay on the SD Vcc regulator. - Fix r8a779{5,6,90} DRIF conflict names by H/W UM 1.50 errata. - Apply upstream code related to mmc. - Add upstream description to DT files added by BSP. - Fix warning in writel() overflow in rcar_i2c.c. - Set environment variable containing CPU type. - Downgrade SD/MMC from UHS/HS200/HS400 modes before boot. - Unmount FS in do_fs_type(). - Support up to MMC HS200 mode with U-Boot. - Add DMA transfer address alignment check at writing. - Fix pinctrl definition according to H/W UM Rev.1.00 and errata. - Force mmc reinit when no card present. - Make DMA transfer end bit configurable and add 1uS delay after DMA completion on older IPs. - Add function to activate with suitable DT and add Enable MULTI_DTB_FIT. Change-Id: I958f86c16e7558ac51b40e68f611b7f20748877c Signed-off-by: Duy Dang <duy.dang.yw@renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit de96e0e4738e0b473c2fb77e2384e2c516990d4d)
2019-04-19rcar-gen3: Add support M3NULCB boardYusuke Goda2-2/+2
M3NULCB board specifications: - R-Car M3-N Ver.1.1 - DDR 2GiB - eMMC 8GB(KLM8G1GESD-B04P) Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Duy Dang <duy.dang.yw@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2019-02-28rcar-gen3: optee-client: Remove SECURITY_CFLAGS option to avoid compile issuesThuy Tran1-0/+3
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
2019-02-28rcar-gen3: optee-client: WORKAROUND to build with GCC 8.1Thuy Tran2-0/+29
This commit applies a W/A patch from optee upstream to fix GCC 8 format-truncation errors. [1] https://github.com/OP-TEE/optee_client/issues/126 Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2019-02-28rcar-gen3: optee-os: WORKAROUND to build with GCC 8.1Thuy Tran1-1/+1
This commit adds NOWERROR=1 to ignore GCC 8 cast-function-type build errors for SYSCALL_ENTRY() [1]. | core/arch/arm/tee/arch_svc.c:47:36: error: cast between incompatible function types from 'void (*)(long unsigned in| t)' to 'TEE_Result (*)(void)' {aka 'unsigned int (*)(void)'} [-Werror=cast-function-type] | #define SYSCALL_ENTRY(_fn) { .fn = (syscall_t)_fn } ^ | core/arch/arm/tee/arch_svc.c:54:2: note: in expansion of macro 'SYSCALL_ENTRY' | SYSCALL_ENTRY(syscall_sys_return), | ^~~~~~~~~~~~~ | core/arch/arm/tee/arch_svc.c:47:36: error: cast between incompatible function types from 'void (*)(const void *, si| ze_t)' {aka 'void (*)(const void *, long unsigned int)'} to 'TEE_Result (*)(void)' {aka 'unsigned int (*)(void)'} [| -Werror=cast-function-type] | #define SYSCALL_ENTRY(_fn) { .fn = (syscall_t)_fn } ^ | core/arch/arm/tee/arch_svc.c:55:2: note: in expansion of macro 'SYSCALL_ENTRY' | SYSCALL_ENTRY(syscall_log), | ^~~~~~~~~~~~~ [1] https://github.com/OP-TEE/optee_os/issues/2393 Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2019-02-28rcar-gen3: Change base_conditional to oe.utils.conditionalThuy Tran1-1/+1
This commit changes to use oe.utils.conditional because these base_* functions were removed in meta/lib/oe from YP2.5. (From Poky rev: 58449f0e9cc4a05c88204cf8ba887b55467d886e) Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-12-20rcar-gen3: optee-os: Update SRCREV to follow the latest versionDuy Dang1-1/+1
This commit updates SRCREV of optee-os recipe for these changes: - Fix the MMU configuration of shared memory. - Merge the following pull request. https://github.com/renesas-rcar/optee_os/pull/2 - Change a cipher method of AES-CTR from a block cipher to a stream cipher. - Fix exclusive controls of asymmetric encryption. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-12-20rcar-gen3: IPL: Update SRCREV to follow the latest versionDuy Dang1-1/+1
This commit updates SRCREV of IPL and Secure Monitor to Rev2.0.0 for these changes: [IPL] - Update DDR setting for E3(rev0.11). - Change the condition of data transfer end of SCIF transfer. - Modify address area in the DDR memory config log output. - Update H3 Ver.3.0 QoS setting rev.0.09. - Update E3 Ver.1.0 QoS setting rev.0.04. - Update H3 Ver.2.0 QoS setting rev.0.20. - Update H3 Ver.3.0 QoS setting rev.0.10. - Update M3 Ver.1.1 QoS setting rev.0.18. - Update M3N Ver.1.1 QoS setting rev.0.08. - Update E3 Ver.1.0 QoS setting rev.0.05. - Modify load destination variable of the Cert Header to static. - [H/W Restriction No.100]: + Disable TLB function of IPMMU cache on E3 Ver.1.1. + Disable TLB function of IPMMU-PV0 cache on E3 Ver.1.x. [Secure Monitor] - Add API for getting DRAM capacity information. - Change the execution timing of system RAM copy process to BL31 startup. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-12-20rcar-gen3: u-boot: Drop SoC name in srec filesKhang Nguyen1-0/+1
This commit updates do_deploy function to drop the SoC name when deploying srec files, the purpose is to keep the legacy name of U-Boot build results. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-12-20rcar-gen3: u-boot: Update SRCREV to version 3.9.1Duy Dang1-2/+2
This commit updates SRCREV of U-Boot to version 3.9.1 for the following changes: - Generate fitting memory map on R-Car Gen3, fix protection area access error and fix to enable icache early in R-Car Gen3. - Add module clock stop before OS startup. - Reorder TMIO clock handling. - Do not issue CMD 6 on SD 1.00 and SD 1.01. - Fix protection area access error at Cortex-A53. - Avoid unsupported internal delay mode for R-Car E3 and limit to 100Mbps. - Revert "net: Fix cache misalignment message after network load operations" - Add "usb_pgood_delay" to the default environment variable. - Fix warning of the make W=1 C=2. - Resolve the problem that the eMMC read of the environment setting value may fail at startup. - Add vbus-supply regulator support. - Resolve the problem that the SD card (UHS, etc.) isn’t recognized. - Fix MOD_SEL bit numbering for R-Car E3. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xv@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: IPL: Support generating all variants of IPL binariesThuy Tran1-2/+2
This commit provides the capability to generate IPL binaries for H3/H3ULCB/E3 build variants at the same time. - For H3 SiP - *.srec: use for H3 SiP DDR 4GiB (1GiB x 4ch) - *-4x2g.srec: use for H3 SiP DDR 8GiB (2GiB x 4ch) - *-2x2g.srec: use for H3 SiP DDR 4GiB (2GiB x 2ch) - For H3ULCB SiP - *.srec: use for H3ULCB SiP DDR 4GiB (1GiB x 4ch) - *-4x2g.srec: use for H3ULCB SiP DDR 8GiB (2GiB x 4ch) - For E3 SiP - *.srec: use for E3 SiP DDR 1GiB - *-4d.srec: use for E3 SiP DDR 2GiB Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: IPL: Upgrade IPL version according to BSP v3.8.0Khang Nguyen7-434/+4
This commit updates IPL and Secure Monitor to Rev1.0.23 rev2 for the following changes: [IPL] - plat: rcar: BL2: Correct MMU configuration. - plat: rcar: Fix suspicious line in platform.mk. - Change the definition value of BL2_LIMIT to end of System RAM. - Update IPL boot message. - Version up the base version to v1.5 of arm-trusted-firmware. - Update DDR setting (rev.0.34). - Modify the alignment of l2_tzram_layout to CACHE_WRITEBACK_GRANULE. - Update H3 Ver.3.0 QoS setting rev.0.08. - Update M3N Ver.1.1 QoS setting rev.0.07. - Update E3 Ver.1.0 QoS setting rev.0.03. - Fix the system WDT detection log is not output when D-Cache is enabled. - Change the timer counter of micro_wait to the Generic Timer. - Fix to log the timestamp at beginning of line. - Change the timer counter for processing time measurement to the Generic Timer. - Modify the DDR log output of IPL boot message. [Secure Monitor] - Version up the base version of arm-trusted-firmware. https://github.com/ARM-software/arm-trusted-firmware Commit ID ed8112606c54d85781fc8429160883d6310ece32 [Tag: v1.5] - Backport the workaround for CVE-2018-3639. Update optee_os Rev1.0.16 rev2 - Fix a contxt size allocated by OP-TEE OS with HW engine. - Fix to exclusive control in ECDSA operation used by HW engine. - Fix to set the initial value for a parameter in TEE_AEInit. - Fix to clear the read cache of standalone_fs_create. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: u-boot: Support deploying multiple u-boot binariesKhang Nguyen1-12/+27
This commit updates recipes to support deploying multiple u-boot binaries of Salvator-XS, H3ULCB and Ebisu boards. It also removed uboot-control.inc which is no longer used. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: u-boot: Update u-boot according to BSP v3.8.0Khang Nguyen2-6/+23
This commit updates u-boot according to BSP v3.8.0. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: u-boot: Backport u-boot v2018.09 upstreamKhang Nguyen5-36/+329
This commit backports u-boot v2018.09 upstream to Yv3.13.0. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: OP-TEE: Drop python-wand and imagemagickThuy Tran2-5/+2
From optee 2.6.0 release [1], they do not use python-wand anymore. It also adds inherit pythonnative to optee-client to follow upstream version. [1] meta-linaro rev: 837fb7d048a30baa6356d3ceb493ec20074b8785 Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: OP-TEE: Apply fix patch for MMU configurationDuy Dang2-0/+47
This commit applies a patch to fix an issue in MMU configuration in which Linux or OP-TEE may overwrite to the illegal memory area. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-19rcar-gen3: OP-TEE: Apply fix patchDuy Dang2-0/+43
This commit applies a patch to fix the following issues: - Fix to set the initial value for a parameter in TEE_AEInit - Fix to clear the read cache of standalone_fs_create. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-19rcar-gen3: arm-trusted-firmware: Support Ebisu 1GB DRAM as defaultDuy Dang1-1/+1
The new version of arm-trusted-firmware sets the default build for Ebisu 2GB DRAM board which is not supported. This commit switches the build option back to Ebisu 1GB DRAM. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-19rcar-gen3: IPL: Apply patch for DDR settingDuy Dang2-0/+200
This commit applies a patch for updating DDR setting. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-19rcar-gen3: IPL: Update IPL to the latest versionKhang Nguyen4-3/+145
This commit updates IPL/Secure Monitor for the following changes: Update IPL and Secure Monitor Rev1.0.22 [IPL] - Update CPG setting. - Add support Ebisu-4D board. - Change the timing to invalidate of instruction cache. - Fixed a bug in the exception handler. - Update DDR setting for E3. [Secure Monitor] - Add the wait processing that is placed in the system RAM area for Suspend To RAM. Update optee_os Rev1.0.15 - Fix the polling process of the HyperFlash driver waiting for HW completion. - Fix incorrect memory access in RSA processing using a provider for a HW engine driver. - Fix a conditional branch in a mutex_destroy function. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-19rcar-gen3: u-boot: Remove -fgnu89-inline flag from KCFLAGSDuy Dang1-2/+0
In the past, -fgnu89-inline flag was added to fix some incompatibilities with GCC 5. At the moment, the issue is resolved after upgrading to GCC 7.3. This commit removes -fgnu89-inline flag from KCFLAGS. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-19rcar-gen3: u-boot: Update SRCREV to follow the latest versionKhang Nguyen1-2/+2
This commit updates u-boot SRCREV to follow the latest version for following updates: - Remove MSTP initial setting value definition. - Increase console buffer sizes. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-06-18rcar-gen3: IPL: Upgrade IPL version according to BSP v3.7.0Khang Nguyen4-47/+7
This commit changes the following contents: - Upgrade IPL and Secure Monitor Rev1.0.21 rev2. - Upgrade optee_os Rev1.0.14 rev2. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-06-18rcar-gen3: u-boot: Upgrade u-boot according to Linux BSP v3.7.0Khang Nguyen1-2/+2
This commit upgrades u-boot version corresponding to BSP v3.7.0 for below fix: - Fix R-Car M3 version display from Ver.1.1 to Ver.1.1/Ver.1.2. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-04-21rcar-gen3: IPL: Update SRCREV to follow the latest versionKhang Nguyen2-4/+6
This commit updates IPL and Secure Monitor to Rev1.0.20 rev2 for following changes: [IPL] - [H/W Restriction No.100] Disable TLB function on IPMMU-PV1 cache on H3 Ver.2.0. - Update H3 Ver.3.0 QoS setting rev.0.06. - Fix the IPL cannot load images to 40-bit address space with eMMC when D-Cache enables. - Add processing to read MSTP status into BL2. - Delete unnecessary register setting. - Add the SWTCNT setting of E3. - Change the unit of transfer size to 256 bytes for RPC, and improved DMA transfer processing. - Add DDR Memory Config log. [Secure Monitor] - Add processing to read MSTP status into BL31. For optee_os, it updates reversion to Rev1.0.13 for following change: - Add processing to read MSTP status into MFIS. It deletes the option which enables Lossy area for E3. It also supports build option for H3: - For R-Car H3 SiP DDR 8GiB (2GiB x 4ch), specify "RCAR_DRAM_SPLIT=1" - For R-Car H3 SiP DDR 4GiB (2GiB X 2ch), specify "RCAR_DRAM_SPLIT=2 RCAR_DRAM_CHANNEL=5" - For R-Car H3 SiP DDR 4GiB (1GiB x 4ch), specify "RCAR_DRAM_SPLIT=1 RCAR_DRAM_LPDDR4_MEMCONF=0" Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-04-21rcar-gen3: u-boot: Update SRCREV to follow the latest versionThuy Tran1-2/+6
This commit updates u-boot SRCREV to follow the latest version for following updates: - Fix XTAL clock for Salvator-XS board. - Use packed structures for networking. As a result, “dcache off” command works fine. It also adds u-boot build options to support each H3 device trees as below: - For R-Car H3 SiP DDR 8GiB (2GiB x 4ch), specify RCAR_DRAM_MAP4_2. - For R-Car H3 SiP DDR 4GiB (2GiB x 2ch), specify RCAR_DRAM_MAP2_2. - For R-Car H3 SiP DDR 4GiB (1GiB x 4ch), specify RCAR_DRAM_MAP4_1. In Yv3.7.0, we will support R-Car H3 SiP DDR 8GiB by default. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: arm-trusted-firmware: Update SRCREV to follow the latest versionKhang Nguyen1-1/+1
This commit updates IPL and Secure Monitor to Rev1.0.19 rev2 for following changes: [IPL] - Add processing of Suspend To RAM for E3. - Update DDR setting for E3(rev0.06). - Update E3 Ver1.0 QoS setting rev.0.02. - Update M3N Ver.1.0 QoS setting rev.0.06. - Fix the LSI_CUT judgement of PFC setting. - Change definition of end address of system ram for BL2. [Secure Monitor] - Fix the primary CPU decision function that runs at startup. - Change the SelfRefresh sequence of Suspend To RAM. - Add the DVFS SCL setting of E3. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: IPL: Update IPL according to BSP v3.6.1 and add support E3Khang Nguyen3-5/+6
This commit changes following contents: - Update IPL and Secure Monitor Rev1.0.19. - Update optee_os Rev1.0.12. It also updates recipes to add support E3 board. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: u-boot: Update SRCREV to follow the latest versionKhang Nguyen1-2/+2
This commit updates u-boot SRCREV for following changes: - Add I2C setting for reset by PMIC for E3. - Add reset command support by using PMIC for E3. - Fix pinmux_config_regs array for E3. - Add clock stops before boot os for E3. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: IPL: Update IPL version according to BSP v3.6.0Thuy Tran5-12/+48
This commit changes following contents: - Update IPL and Secure Monitor Rev1.0.18 rev2 - Update optee_os Rev1.0.11 rev2 Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: u-boot: Upgrade version to v3.6.0 and adapt to rocko u-boot headersThuy Tran2-5/+12
This commit updates u-boot version corresponding to BSP v3.6.0 for below fixes: - Add CONFIG_CMD_CACHE for enabling cache control commands. - Fix clock bit assignment of EHCI3. - Store last address/size/etc as ulong. - Build warning fixes for 64-bit. - Add CONFIG_HUSH_PARSER for enabling the "hush" shell as command line interpreter. - Add eMMC ver.5.1 support. - Update MMC_ERASE argument to match Linux kernel. - Backport for gcc 7.2.0 compiler support. The u-boot.inc used by the bb recipe has been split into two parts in the pyro poky meta. Adopt to the new style by providing the missing u-boot-common*.inc file containing the license information. Signed-off-by: Stephen Lawrence <stephen.lawrence@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-11-24rcar-gen3: IPL: Update SRCREV to follow the latest versionThuy Tran2-2/+3
This commit updates IPL components versions as below: - Update IPL and Secure Monitor Rev1.0.17 rev2. - Update optee_os Rev1.0.10. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-11-24rcar-gen3: u-boot: Upgrade version according to Linux BSP to v3.5.9Thuy Tran1-2/+2
This commit updates u-boot according to Linux BSP v3.5.9 for supporting R-Car M3N Ver.1.0 and updating following items: - Add missing IPSR18 bits to R8A7795 PFC. - Fix unnecessary write "bus_width=1" for SDHI. U-boot config for M3N is r8a77965_salvator-x_defconfig. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: Use flexible coding style for Renesas datadirRonan Le Martret2-6/+6
This commit modifies recipes to use RENESAS_DATADIR variable for /usr/local directory instead of hard coding. This commit comes from AGL patch. Bug-AGL: SPEC-533 Change-Id: I865ea809c3c59ba136027fc8b99628df20c16275 Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com> (cherry picked from commit 9598336fa2b4a4237255cdd866350eb7c03fdd81)
2017-08-25rcar-gen3: IPL: Update SRCREV to follow the latest versionThao Nguyen2-2/+2
This commit updates IPL components versions as below: - Update IPL and Secure Monitor Rev1.0.16 rev4. - Update optee_os to Rev1.0.9 rev2. - Update optee_linuxdriver to Rev1.0.7 rev2. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-08-25rcar-gen3: u-boot: Upgrade version according to Linux BSP to v3.5.6Thao Nguyen1-2/+2
This commit updates u-boot according to Linux BSP v3.5.6 for below fixes: - Fix u-boot reset for ULCB. - The SMSTPCR value is illegal immediately before the start of the kernel. - The following fatls command execution of usb start/stop Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: arm-trusted-firmware: Update SRCREV to follow latest versionThao Nguyen1-1/+1
This commit updates IPL and Secure Monitor to Rev1.0.15 rev3. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-06-21rcar-gen3: u-boot: Update u-boot to v3.5.4Thao Nguyen1-2/+2
This commit updates u-boot to BSP v3.5.4 for following changes: - Remove MSTP registers values rewriting process. - Fix multiple declarations of DECLARE_GLOBAL_DATA_PTR. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: arm-trusted-firmware: Set PMIC_LEVEL_MODE to 0 for ULCBYusuke Goda1-1/+1
The operation mode of the PMIC for Salvator-X and ULCB are different: - ULCB : PULSE MODE (PMIC_LEVEL_MODE=0) - Salvator-X : LEVEL MODE (PMIC_LEVEL_MODE=1(default)) This commit updates arm-trusted-firmware recipe to check PMIC_LEVEL_MODE option and to control the corresponding PMIC. Change-Id: I152c1286d525000f58c678ec37eb6aac9502ac45 Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: IPL: Update IPL according to BSP v3.5.3Thao Nguyen2-2/+2
This commit changes following contents: - Update IPL and Secure Monitor Rev1.0.14 rev2. - Update optee_os Rev1.0.8. Change-Id: Ibc16e31545b762451eb3704f817cd0d53fc1a50d Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-04-19rcar-gen3: u-boot: Upgrade u-boot to v3.5.3Thao Nguyen1-2/+2
This commit updates u-boot version corresponding to BSP v3.5.3 for following items: - Add workaround for PRR register of R-Car M3 WS1.1. (Fix printing cpu info.) - Fix USB2.0 ch2 found device for R-Car H3 WS2.0. - Revert "armv8: Add ISB after cpacr_el1 update" for I/D cache ON. Change-Id: I952aabfeec8b8518760494ba987f2cdd045b6f66 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-03-27rcar-gen3: arm-trusted-firmware: Set RCAR_GEN3_ULCB to 1 for ULCBYusuke Goda1-1/+2
This commit is to add judge state for ULCB. If machine is ulcb, "RCAR_GEN3_ULCB=1" will be added to compile option. Change-Id: Ia05f33a4362c4a7a302c8c0fc5785415f27b15b5 Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com> Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-03-27rcar-gen3: QoS: Update SRCREV for QoS driver and interfaceThao Nguyen1-1/+1
This commit updates SRCREV of QoS for following fixes: QoS Driver - Fix year of Copyright - Fix number of emetents to load QoS Libraries - Fix return val - Fix FD close Change-Id: Idd88c0240df3023ef29865f6e65830d09acbf602 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-03-23rcar-gen3: IPL: Update IPL version according to BSP v3.5.2Thao Nguyen2-2/+2
This commit changes following contents: - Update IPL and Secure Monitor Rev1.0.13 rev2. - Update optee_os Rev1.0.7 rev2. Change-Id: I0feeaad39dc13c79b7a2f2b8faaac4955413dcff Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-03-23rcar-gen3: u-boot: upgrade BSP v3.5.0 -> v3.5.2Thao Nguyen1-2/+2
This patch upgrade BSP v3.5.0 -> v3.5.2. [v3.5.2] - Fix Ethernet driver and could turn on I/D cache. Change-Id: Ic90b59ea4db549248b263eedd4fd40c865f74408 Signed-off-by: Thao Nguyen <thao.nguyen.yb@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2017-01-27First commit.Renesas-Yocto-v2.16.0Takamitsu Honda8-0/+317
Renesas BSP v3.5.1 (kernel v4.9 stable) [Environment] poky: yocto-2.1.2 (cca8dd15c8096626052f6d8d25ff1e9a606104a3) meta-openembedded: 55c8a76da5dc099a7bc3838495c672140cedb78e meta-linaro: 2f51d38048599d9878f149d6d15539fb97603f8f [Information] - U-boot: Changed load address from H'49000000 to H'50000000 - XDG_RUNTIME_DIR has been changed from "/run/user/root" to "/run/user/0" - Change location of include directory, which stores common user header files, to $(INCSHARED) - In BSP Only, core-image-weston is not supported even though local-wayland.conf is provided. - Please set Salvator-x SW7 Pin-1. In after Yocto BSP v2.12.0, it is 　necessary to enable BKUP_TRG signal for Suspend to RAM. - The dtb filename was changed in R-Car H3. Only "Image-r8a7795-es1-salvator-x.dtb" is supported in this version. Please use "Image-r8a7795-es1-salvator-x.dtb" It supports R-Car H3 WS1.0 and WS1.1. - Please update your local.conf and bblayers.conf corresponding to Yocto v2.16.0 package. You can refer to meta-rcargen3/docs/sample/conf/ for updated contents. - You have to re-compile out-of-recipe software like user application by v2.16.0 SDK toolchains. - In some boards, the resuming from System Suspend to RAM may cause unstable operation or failed to resume. Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>