| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This commit upgrades Linux BSP to v3.9.4 for the following changes:
- Fix power domain for FCPCS of r8a77965 in the device tree according
to H/W UM Rev.1.50 correction in the future.
- Rename AVB_AVTP_MATCH and AVB_AVTP_CAPTURE pin function definitions
of r8a77990 according to H/W UM Rev.1.50 correction in the future.
- Revert the patch of r8a77990 pinctrl about MOD_SEL1 bit31 and bit30
according to H/W UM errata for Rev.1.00.
- Fix cpg_sd_clock_round_rate return value.
- Rename some pin function and cpg definition according to H/W UM
Rev.1.50 errata.
- Rename SEL_ADG_B to SEL_ADGB and rename SEL_ADG_C to SEL_ADGC
according to H/W UM Rev.1.50.
- Fix SCIF5 DMA channels according to H/W UM Rev.1.50.
- Fix clock and reset for ivdp1c according to H/W UM Rev.1.50.
- Add support for R-Car M3 ES3.0.
- Fix MMC cannot probe by modprobe command after S2R issue.
Change-Id: I12901a91f2e6ebaf5879456faeb5f9d3baad6f32
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Duy Dang <duy.dang.yw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
(cherry picked from commit 5be728d6bfeb06c3174d5dffd09775d38674dd69)
|
|
M3NULCB board specifications:
- R-Car M3-N Ver.1.1
- DDR 2GiB
- eMMC 8GB(KLM8G1GESD-B04P)
Signed-off-by: Yusuke Goda <yusuke.goda.sx@renesas.com>
Signed-off-by: Duy Dang <duy.dang.yw@renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Current GFX source code will get compilation error with GCC 8.1,
because it is defined in makefile to use -Wall to enable all
Warnings check.
-Wcast-function-type, -Wsizeof-pointer-div and -Wstringop-truncation
are new command-line options have been added for the C and C++
compilers in GCC 8.
This commit applies a W/A patch to silence -Wcast-function-type,
-Wsizeof-pointer-div and -Wstringop-truncation errors.
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit changes to use oe.utils.conditional because these base_*
functions were removed in meta/lib/oe from YP2.5.
(From Poky rev: 58449f0e9cc4a05c88204cf8ba887b55467d886e)
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit applies a patch to fix kernel crash during FULL HD playback.
Signed-off-by: Tan Nguyen <tan.nguyen.wh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit backports a fix patch from Linux v4.15 to fix build error
below:
| ERROR: linux-libc-headers-4.14-r0 do_install: oe_multilib_header:
Unable to find header asm/bpf_perf_event.h.
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
In thud branch, it supports Linux 4.18 version.
This commit updates LIC_FILES_CHKSUM value to adapt Linux BSP 4.14.
Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of vspm and vspmif driver to follow
the latest version for the following changes:
[vspmif_drv]
- Fixed an issue where vspmif could crash.
[vspmif_lib]
- To correspond boards that do not support Full HD.
[vspm_drv]
- Fix VI6_HGO/HGT_WBUFS setting from CPU write to Display List.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of EtherAVB driver and applications
to follow the latest version for some changes as below:
[avb-mse]
- Core: Add filter of outliers in create avtp timestamp
- Core: Fix problem that the streaming might be stalled
- Core: Fix missing bit mask at difference calculation of M2TS timestamp
[avb-applications]
- avdecc: make: fix cmake error if not doing submodule update
- avblauncher: update example script affect by changed MSE usage
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of MMNGR modules to the latest version
for the following changes:
- Improve error handling for import phases and close() function about
Refcount of dmabuf in MMNGRBUF.
- Add support for Linux v4.14-LTSI.
- Remove unnecessary check when parsing reserved memory regions in DT
- Disable IPMMU TLB cache function in E3 Ver.1.x due to hardware
restriction.
- Add E3 Ver.1.1 support.
- Add error handling for mm_probe() function.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to v3.9.2 for the following changes:
[Kernel]
- Add support for RCKSEL clock selection.
- Fix pin functions of R-Car E3 according to H/W UM Rev1.00 errata.
- Fix warning of the make W=1 C=2.
- Identify R-Car M3 Ver.1.3.
- Add the big.LITTLE CAS scheduler fix patches.
- Fix MOD_SEL bit numbering for R-Car E3.
[Power Management]
- Fixup power-domains of 3DGE for R-Car E3 Ver.1.0 and add device
tree file for R-Car E3 Ver.1.0.
[Audio Driver]
- Fixup clock start checker.
- Resolve the problem that the noise is generated during long playback
with R-Car E3 Ebisu-4D board by kernel rebasing.
[Display Driver]
- Add function of suspend and resume to adv7511_drv.c and add hot plug
event function at resume in rcar_du_drv.c.
- Add depends on DRM_RCAR_DU to config DRM_RCAR_LVDS.
- Revert "drm: rcar-du: Fix legacy DT to create LVDS encoder nodes".
- Add clock function for LVDS PLL.
[Ethernet Driver]
- Decrease TxFIFO depth of Q3 and Q2 to one.
- Fix not to call phy_resume() if PHY is not attached and add toggling
phy reset if PHY is not attached.
- Revert "ravb: RX checksum offload" for communicating of Q-Tag VLAN
frame correctly.
- Resolved the problem that the S2RAM resume failed on R-Car E3
Ebisu-4D by kernel rebasing.
- Avoid unsupported internal delay mode for R-Car E3 and limit to
100Mbps.
[I2C Driver]
- Check bus state before reinitializing.
[IPMMU Driver]
- Fix crash on early domain free.
- Revert "arm64: defconfig: Enable QCOM_IOMMU" for suspending with
LTSI kernel.
- Correct whitelist devices assignment.
[PCIe Driver]
- Avoid PCI device removing/rescanning through sysfs triggers
a deadlock.
[PWM Driver]
- Avoid deadlock warning when removing PWM device.
[SD/MMC Driver]
- Fix card initialization failure in high speed mode.
- Add adjust HS400 offset by manual calibration mode and adjust HS400
offset by manual calibration mode for R-Car M3 Ver.1.3.
[USB2.0 Function]
- Add reset_control.
- Backport upstream patches to support OTG mode for R-Car E3.
- Make DMAC system sleep callbacks explicit.
- Add Super-Speed (b-device) support.
[Video Capture driver]
- Review adv748x driver for R-Car E3 Ebisu board and add option for
changing SD output route to TXA.
- Revert "rcar-vin: rcar-csi2: Add blank margin when caluculating bit
rate" and fix pixel rate values.
- Add CPG reset and release when using digital pin.
[RWDT Driver]
- Don't keep timer value during suspend/resume.
- Don't set divider while watchdog is running.
This also updates ADSP driver patches to adapt to the new
Linux version.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xv@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates V4L2/VSPM SRCREV for following updates:
[vsp2driver]
- Support the expression for color space conversion.
- Fix minimum input pixel size for RGB format to 1 pixel.
[vspm_drv]
- Move function definitions out of vspm_cmn.h.
- Fix macro name to register name.
[vspmif_drv]
- Convert user_data and cb_func to user pointers.
- Remove __user macro from the variable declaration.
[vspmif_lib]
- Add prototypes for VSP Manager API.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates QoS driver SRCREV for following item:
[qos_drv]
- Feedback of static analysis tool result.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
There is no reason to use UVCS_SRC variable for the source URI instead
of pointing directly. So this commit removes it.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit fixes a typo in recipe comment.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Kernel module ICCOM recipe requires iccom-control.inc which only defines
USE_ICCOM, but nowhere in the recipe uses this variable.
This commit removes the unneeded requirement.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
The improper error occurs when building Kernel module ADSP without its
distro feature enabled in local.conf:
| ERROR: kernel-module-xtensa-hifi-1.0-r0 do_populate_lic: QA Issue: kernel-module-xtensa-hifi: LIC_FILES_CHKSUM points to an invalid file
This commit modifies recipe to use distro_features_check class that
provides the proper error:
| ERROR: Nothing PROVIDES 'kernel-module-xtensa-hifi'
| kernel-module-xtensa-hifi was skipped: missing required distro feature 'adsp' (not in DISTRO_FEATURES)
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipes to support building ADSP ALSA driver when
enabling adsp distro feature.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit applies device tree rollback patches to support ADSP ALSA
driver.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to v3.8.0 for the following updates:
[Kernel]
- Fix CPG definitions of R-Car H3/M3N/E3 for H/W manual Rev.1.00.
- PFC definitions of R-Car H3/M3N/E3 for H/W manual Rev.1.00.
- Fix R-Car H3/M3N/E3 module clock system mistake.
[Audio driver]
- Fixup not to call clk_get/set under non-atomic.
- Fixup SSI clock during suspend/resume modes.
[Display driver]
- Don't use TV sync mode when not supported by the hardware.
- Add clock driver registration for LVDS PLL.
[SATA driver]
- Fix really mask all interrupts on Gen2 and later.
[SD/MMC driver]
- Add adjust HS400 offset by manual calibration mode.
- Change HW adjustment register according to speed mode.
[Video Capture driver]
- Fix PHTW register procedure and VnCSI_IFMD register access for
R8A77990.
- Fix scaling judgement condition of #181156 patch.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
The Kernel source has been updated.
This reverts commit 8b090e008ef2c4cb9a97c20426f1ac03f9f15555.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades mmngr driver version to v1.5 to fix
static analysis warnings.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of EthernetAVB components for following
changes:
- Fix buffer overflow when write_stq.
- Fixes NULL pointer dereference at streaming stopping.
- Fix wrong output position calculation.
- Add mse_is_buffer_empty to clarify.
- mse_trans_complete change to select target buf_list.
- delay_time value to set in all usecases.
- Split setup logic of PTP Timer and Capture.
- Add utilitity macro PTP_TIME_DIFF_S32.
- Add output timing adjust feature on video listener.
- Add upper limit and change default value for tx/rx delay time.
- Add header overhead in calc_cbs_by_bitrate.
- Add MSE_TRANSMIT_MODE for MPEG2TS usecase.
- Revise calculation of the AVTP timestamp.
- Add transmit timing adjust feature on MPEG2TS talker.
This also fixes the issue in which streaming data is not smooth
and hang-up.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
The Kernel Source has been updated.
This reverts commit a1e844b0849b1c47f37f6ae6095b17bff5f79539 which is no
longer needed.
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to 3.7.3 for the following updates:
[Kernel]
- Enable DEVFREQ configuration.
[Audio driver]
- Fix the noise problem when repeating start and stop of playback
during capture.
[Display driver]
- Fix about reserved bits, unused registers and offset address related
to HDMI registers for R-Car.
- Add re-write of vsync pulse width.
- Add dot clock valid check.
- Revert "v4l: vsp1: Add max RPF number check".
- Fix read past end of lvds[] array and fix div-by-0 when propagating
pixelrate.
- Fix bridge null check.
- Track dma-buf fences.
- Fix definitions according to H/W UM Rev1.00.
- Allow importing non-contiguous dma-buf with VSP and set the DMA
coherent mask for the DU device
- Fix to refer to member after Null check in vsp1_pipe.c.
[DMA Engine driver]
- Add dma_pause operation.
- Don’t use DMAC error interrupt.
- Avoid to writing CHCR.TE to 1 if TCR is set to 0.
[I2C driver]
- Fix dma_direction variable clear.
- Cleanup DMA for all kinds of failure.
[MSIOF driver]
- Fix handling of writing value of SISTR register.
- Change wait time of reset completion
[PCIe driver]
- Handle returned value of rcar_pcie_wait_for_dl for warning QAC with
MISRA-C 2012.
[SD/MMC driver]
- Backport upstream patch “mmc: core: properly init drv_type”.
- Fix the definition of RST_RESERVED_BITS.
- [H/W Restriction No.109] R-Car M3 Ver.1.2 or earlier does not support
eMMC HS400 mode. It supports up to HS200 mode.
[USB2.0 Host driver]
- Add wait for IDDIG.
[Video Capture driver]
- Cleanup notifier in error path.
- Add streaming count check when streming off.
- Fix definitions according to H/W UM Rev1.00.
- Fix setting order of UDS disable.
Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
E3 build target board was disabled default in Kbuild configuration:
DTARGET_BOARD_E3=0
This commit sets "DTARGET_BOARD_E3=1" automatically when target
board is E3.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates recipe to set Kernel module pvrsrvkm works in
autoload mode.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds a WORKAROUND patch for the issue that mini SD partition
information cannot be read correctly.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit enables DEVFREQ configuration.
Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com>
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to v3.7.0 for following updates:
[Kernel]
- Change Linux version to v4.14.35 from v4.14.
- Add support ZG clock divider for R8A77990 (R-Car E3).
- Remove patch for Identifing R-Car M3 Ver.1.2 or later.
[Power Management]
- Fix "Using plain integer as NULL pointer" in rcar_ems_ctrl.c.
- Add AVS support for gsx_opp_table.
- Update SYSC power ON/OFF flow.
[Display driver]
- Fix procedure for extal and dotclkin selection for R-Car E3.
- Add shutdown callback function in platform_driver".
- Fix state flag in case of dual link mode for R-Car E3.
[Ethernet driver]
- Move reset-gpios property to EthernetAVB node for R-Car E3 Ebisu
board.
[I2C driver]
- Fix handling of the RESTART phase and STOP phase.
[MSIOF driver]
- Add 2 clock delay by R-Car H3 Ver.3.0 only specification.
[SD/MMC driver]
- Fix eMMC HS400 mode setting.
- Delete wait in tuning process.
[USB2.0 Function]
- Avoid wrong list handling in printer_write().
[USB2.0 Host driver]
- Avoid the problem of Suspend to RAM in case of connecting USB mouse by
removing following patches:
<commit ID:cad25bf1> phy: rcar-gen3-usb2: Add the interrupt disabled
in suspend
<commit ID:318b535> phy: rcar-gen3-usb2: Support System Suspend To RAM
[Video Capture driver]
- Fix IFMD table information for R8A77990 (R-Car E3).
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit fixes the typos in recipes.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of EthernetAVB components for following
changes:
- Fix setting both S bit and E bit of FU header.
- Fix to restart to sending packets when not in time for the interval.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV of Memory Manager driver for following items:
- Update CMA memory mapping for R-Car E3.
- Disable IPMMU TLB cache function in selected SoC revision.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit applies the power control patches in R-Car H3 Ver.3.0.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to v3.6.2 for following updates:
[Kernel]
- "WARNING: possible circular locking dependency detected" occurs with
repeating reboot. However, it was false positive, and it was confirmed
that there was no problem.
- Identify R-Car M3 Ver.1.2 or later.
- Remove lossy descompress area from MMNGR node and reduce reserved area
for R-Car E3 Ebisu board.
[Power Management]
- Improve power domains always on implementation.
- Fix interrupts are not raised issue on R-Car E3.
- Update CAS source.
[Display driver]
- Add overlay layer size check.
- Fix possible crtcs for plane when using VSPDL.
[IPMMU driver]
- Add workaround for disabling uTLBs.
[MSIOF driver]
Add MSIOF module clock changing processing for R-Car Series,
3rd Generation.
[PCIe driver]
- Fix memory leak in of_pci_get_host_bridge_resources.
[Thermal driver]
- Use DIV_ROUND_CLOSEST correctly as its description.
[USB3.0 Host driver]
- Cannot Suspend to RAM when enabling USB3.0.
- Confirm recognition of USB3.0 memory through HUB for setting
/etc/udev/rules.d/99-usb.rules.
[Video Capture driver]
- Allocate a scratch buffer at stream start. Then use scratch buffer
and always run in continuous mode.
- Fix PHTW register flow below 250 mbps.
- Fix clock control flow so that the warning message
“MSTP status timeout” is not displayed and when UDS (scaling)
is executed at VIN0, a black screen does not come out.
- Fix streaming procedure when resuming.
[Audio driver]
- Playback or capture doesn’t resume after Suspend to RAM.
[USB2.0 Function]
- Kernel error occurs with rmmod of g_printer.
- The dd command error occurs with g_mass_storage.
[USB2.0 Host driver]
- When connecting USB mouse, “Bad mode in Error handler” may occur with
Suspend to RAM.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV to apply following changes:
- Fix QAC MISRA C:2012 warnings.
- Disable TLB function on IPMMU caches on E3.
- To add E3 support.
- xxxxxx mmngr_lib update test.
- Update MMNGR revision to v1.3.
- Change the way of parsing reserved memory regions in DT.
- Do not parse reserved memory region for default CMA in DT twice.
- Update IPMMU(MMU) deinitialize sequence.
It also adds the configuration for E3.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates VSPM SRCREV for following fix:
[vspm_drv]
- Fix issue when up-scaling at UDS.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit fixes comment typos.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV for AVB Streaming, MSE and MCH driver
by following updates:
[AVB Streaming driver]
- Update version to v2.13.0.
- Cleanup checkpatch warnings.
[AVB MSE]
- Merge dev branch into rcar-gen3.
[AVB MCH]
- Add auto selection of avtp_clk_frq value.
- Cleanup variable set but not used.
- Cleanup symbol was not declared.
- Cleanup constant is so big it is type.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies graphic recipes to support E3 GFX version.
It also updates copyscript to support copying E3 GFX packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates QoS driver SRCREV for following item:
[qos_drv]
- Support E3 Ver1.0 (or later tentatively).
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
CAS only supports H3 (SoC: r8a7795), M3 (SoC: r8a7796).
This commit adds a python function to disable CAS automatically and show
the warning message as below in case of wrong setup.
| WARNING: linux-renesas-4.14.0+gitAUTOINC+4a7e26bdbc-r1 do_cas_checking:
| CAS only supports H3 (SoC: r8a7795), M3 (SoC: r8a7796), this feature will be disabled automatically
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to enable RPMSG_VIRTIO config depend on
ICCOM distro feature.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds support E3 and upgrades Linux BSP to v3.6.1 for
the following updates:
[Kernel]
- Add R-Car E3 support.
- Fix Gfx clock.
[Power Management]
- Register clock for all cpu nodes for R-Car H3 to device tree.
- Improve to build only when enabling RCAR_POWER_AVS.
- Update IPA for CA53, need tune "contribution" parameter.
- Fix section mismatch build warnings.
- Fix double source of drivers/soc/renesas/Kconfig.
[Display driver]
- Fix continuous mode for dual pipelines.
- Fix DISP interrupt enable order, DPPR register set order and LVDS
startup sequence.
- Fix LVDS startup on R-Car Series, 3rd Generation.
- Fix LVDS stop sequence.
[DMA Engine driver]
- Fix max_chunk_size for R-Car Series, 3rd Generation.
- Check the done lists in rcar_dmac_chan_get_residue().
[I2C driver]
- Fix the problem that the strange data transfers with DMA transmit.
[IPMMU driver]
- Fix sequence issue.
[SD/MMC driver]
- Fix handling of SET_BLOCK_COUNT for RPMB.
[USB3.0 Function]
- Fix oops in renesas_usb3_remove().
- Don't print a warning when setting link state for disabled ports.
[Video Capture driver]
- Fix transfer rate and phy register value. Add CPG reset release
procedure.
- Add bytes per line when opening device.
- Fix power management procedure when resuming.
- Add MSTP status check after CPG reset.
- Fix division procedure for __udivdi3 error.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Linux BSP v3.6.1 has been updated.
This reverts commit f8e4fb869abdfac3211b5f933202644901eeac7a.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
According to YP Manual, we can use the KERNEL_MODULE_AUTOLOAD variable
anywhere that it can be recognized by the kernel recipe or by an
out-of-tree kernel module recipe. Therefore, KERNEL_MODULE_AUTOLOAD
is a global list, so it should be used "+=" or "_append".
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
configuration in rootfs
This commit modifies recipe to add vsp2.conf file under
/etc/modules-load.d/ directory into rootfs after changing kernel
module package names in YP2.4.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to ship kernel module of PowerVR GPU into
rootfs after changing kernel module package names in YP2.4.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
kernel modules
From YP2.3 [1], kernel module packages are now suffixed with
the kernel version in order to allow module packages from
multiple kernel versions to co-exist on a target system.
We can return to the previous naming scheme that does not include
the version suffix by setting KERNEL_MODULE_PACKAGE_SUFFIX to blank
to build modules without suffix.
[1] http://www.yoctoproject.org/docs/2.3/ref-manual/ref-manual.html#migration-2.3-miscellaneous-changes
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV for AVB Streaming driver and MSE Core
by following updates:
[AVB Streaming driver]
- Follow the change of kernel API from v4.9 to v4.14.
[AVB MSE]
- Add support multi slice coded H.264 stream.
- Optimize resource management to reduce statically allocated memory
and improve code readability.
- Support handling module reference count for managing module
dependency.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
Khang Nguyen
Yusuke Goda
Thuy Tran
Tan Nguyen
Duy Dang
Khang Nguyen
Takeshi Kihara
Thuy Tran