| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The ADSP on Renesas SoCs required a reserved memory area to become
enabled, and this needs to be done manually.
This patch adds sound hardware abstraction information for the m3ulcb
and m3ulcb-kf (kingfisher) device trees. This is helpful on-board the
ADSP for dynamically determining sound hardware at runtime, allowing
single binaries to be used between the two boards.
Future work will incorporate the h3ulcb and Salvator boards into the
abstraction.
Bug-AGL: SPEC-1424
Change-Id: Ie3f3d2227e79a6396f056fc63ecbcc6c73034e6b
Signed-off-by: Mark Farrugia <mark.farrugia@fiberdyne.com.au>
|
|
Implements the patches required to interface with the HiFi2 Xtensa ADSP
core on BSP 4.14, including M3ULCB, Kingfisher, and Salvator boards.
Bug-AGL: SPEC-1227
Change-Id: I9e58f89bdd93db595b8ec7a77b9261a9438e4878
Signed-off-by: Mark Farrugia <mark.farrugia@fiberdyne.com.au>
|
|
This adds support in the kernel for the GMSL Camera board
available for Kingfisher:
http://www.shimafuji.co.jp/DL/EN/InfotainmentCarrierBoard/#GMSL02
Instructions on how to use the board are also available:
https://elinux.org/R-Car/Tests:rcar-vin#Multi-channel_CSI-2_tests
Change-Id: Ib9da998be2018467284d54b977aff38158dba472
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
|
|
Implements the patches required to interface with the HiFi2 Xtensa ADSP core.
Bug-AGL: SPEC-1227
Change-Id: I68a2423e7fa8a23675f3ff8510f01226c688ca05
Signed-off-by: Mark Farrugia <mark.farrugia@fiberdyne.com.au>
|
|
Add the patches from SPEC-1057 for M3 audio quality to linux-renesas.
Bug-AGL: SPEC-1057
Change-Id: Ia1413521034519ca9b49c481a55e519864857ce6
Signed-off-by: Scott Murray <scott.murray@konsulko.com>
|
|
This commit updates SRCREV to apply following changes:
- Fix QAC MISRA C:2012 warnings.
- Disable TLB function on IPMMU caches on E3.
- To add E3 support.
- xxxxxx mmngr_lib update test.
- Update MMNGR revision to v1.3.
- Change the way of parsing reserved memory regions in DT.
- Do not parse reserved memory region for default CMA in DT twice.
- Update IPMMU(MMU) deinitialize sequence.
It also adds the configuration for E3.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates VSPM SRCREV for following fix:
[vspm_drv]
- Fix issue when up-scaling at UDS.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit fixes comment typos.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV for AVB Streaming, MSE and MCH driver
by following updates:
[AVB Streaming driver]
- Update version to v2.13.0.
- Cleanup checkpatch warnings.
[AVB MSE]
- Merge dev branch into rcar-gen3.
[AVB MCH]
- Add auto selection of avtp_clk_frq value.
- Cleanup variable set but not used.
- Cleanup symbol was not declared.
- Cleanup constant is so big it is type.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies graphic recipes to support E3 GFX version.
It also updates copyscript to support copying E3 GFX packages.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates QoS driver SRCREV for following item:
[qos_drv]
- Support E3 Ver1.0 (or later tentatively).
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
CAS only supports H3 (SoC: r8a7795), M3 (SoC: r8a7796).
This commit adds a python function to disable CAS automatically and show
the warning message as below in case of wrong setup.
| WARNING: linux-renesas-4.14.0+gitAUTOINC+4a7e26bdbc-r1 do_cas_checking:
| CAS only supports H3 (SoC: r8a7795), M3 (SoC: r8a7796), this feature will be disabled automatically
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to enable RPMSG_VIRTIO config depend on
ICCOM distro feature.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds support E3 and upgrades Linux BSP to v3.6.1 for
the following updates:
[Kernel]
- Add R-Car E3 support.
- Fix Gfx clock.
[Power Management]
- Register clock for all cpu nodes for R-Car H3 to device tree.
- Improve to build only when enabling RCAR_POWER_AVS.
- Update IPA for CA53, need tune "contribution" parameter.
- Fix section mismatch build warnings.
- Fix double source of drivers/soc/renesas/Kconfig.
[Display driver]
- Fix continuous mode for dual pipelines.
- Fix DISP interrupt enable order, DPPR register set order and LVDS
startup sequence.
- Fix LVDS startup on R-Car Series, 3rd Generation.
- Fix LVDS stop sequence.
[DMA Engine driver]
- Fix max_chunk_size for R-Car Series, 3rd Generation.
- Check the done lists in rcar_dmac_chan_get_residue().
[I2C driver]
- Fix the problem that the strange data transfers with DMA transmit.
[IPMMU driver]
- Fix sequence issue.
[SD/MMC driver]
- Fix handling of SET_BLOCK_COUNT for RPMB.
[USB3.0 Function]
- Fix oops in renesas_usb3_remove().
- Don't print a warning when setting link state for disabled ports.
[Video Capture driver]
- Fix transfer rate and phy register value. Add CPG reset release
procedure.
- Add bytes per line when opening device.
- Fix power management procedure when resuming.
- Add MSTP status check after CPG reset.
- Fix division procedure for __udivdi3 error.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Linux BSP v3.6.1 has been updated.
This reverts commit f8e4fb869abdfac3211b5f933202644901eeac7a.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
According to YP Manual, we can use the KERNEL_MODULE_AUTOLOAD variable
anywhere that it can be recognized by the kernel recipe or by an
out-of-tree kernel module recipe. Therefore, KERNEL_MODULE_AUTOLOAD
is a global list, so it should be used "+=" or "_append".
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
configuration in rootfs
This commit modifies recipe to add vsp2.conf file under
/etc/modules-load.d/ directory into rootfs after changing kernel
module package names in YP2.4.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to ship kernel module of PowerVR GPU into
rootfs after changing kernel module package names in YP2.4.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
kernel modules
From YP2.3 [1], kernel module packages are now suffixed with
the kernel version in order to allow module packages from
multiple kernel versions to co-exist on a target system.
We can return to the previous naming scheme that does not include
the version suffix by setting KERNEL_MODULE_PACKAGE_SUFFIX to blank
to build modules without suffix.
[1] http://www.yoctoproject.org/docs/2.3/ref-manual/ref-manual.html#migration-2.3-miscellaneous-changes
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV for AVB Streaming driver and MSE Core
by following updates:
[AVB Streaming driver]
- Follow the change of kernel API from v4.9 to v4.14.
[AVB MSE]
- Add support multi slice coded H.264 stream.
- Optimize resource management to reduce statically allocated memory
and improve code readability.
- Support handling module reference count for managing module
dependency.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
ADSP new packages have been released.
This commit modifies recipes to add them.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipes to support DTV/DVD modules for M3N board.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Video Codec new packages have been released.
This commit modifies recipe to add UVCS driver new package.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
In eSDK context, this checking will cause following error
since KERNELSRC does not exist.
|WARNING: Setscene task (/ssd/FS_YP2.4/build_mmp/eSDK_YP2.4/layers/meta-renesas/meta-rcar-gen3/recipes-kernel/kernel-module-vspm/kernel-module-vspm.bb:do|_populate_sysroot_setscene) failed with exit code '1' - real task will be run instead
|ERROR: Task kernel-module-vspm.do_populate_sysroot_setscene failed
This patch adds condition to check for the existence of KERNELSRC
just when not in context of eSDK.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
When switch between different machines (i.e. salvator-x and h3ulcb),
we can meet below issue:
ERROR: kernel-module-vspm-1.0-r0 do_populate_lic: The recipe kernel-module-vspm is trying to install files into a shared area when those files already exist.
Those files and their manifest location are:
/ssd/FS_YP2.4/build_mmp/h3ulcb-build/tmp/deploy/licenses/kernel-module-vspm/generic_MIT
(matched in manifest-salvator_x-kernel-module-vspm.populate_lic)
/ssd/FS_YP2.4/build_mmp/h3ulcb-build/tmp/deploy/licenses/kernel-module-vspm/recipeinfo
(matched in manifest-salvator_x-kernel-module-vspm.populate_lic)
/ssd/FS_YP2.4/build_mmp/h3ulcb-build/tmp/deploy/licenses/kernel-module-vspm/GPL-COPYING
(matched in manifest-salvator_x-kernel-module-vspm.populate_lic)
/ssd/FS_YP2.4/build_mmp/h3ulcb-build/tmp/deploy/licenses/kernel-module-vspm/MIT-COPYING
(matched in manifest-salvator_x-kernel-module-vspm.populate_lic)
/ssd/FS_YP2.4/build_mmp/h3ulcb-build/tmp/deploy/licenses/kernel-module-vspm/generic_GPLv2
(matched in manifest-salvator_x-kernel-module-vspm.populate_lic)
Please verify which recipe should provide the above files.
The reason is the tmp/deploy/licenses/kernel-module-vspm/ has not
been cleaned during do_clean task. To avoid it,
we should also clean ${LICENSE_DIRECTORY}/${PN} in do_clean.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates VSPM/V4L2 SRCREV for supporting
kernel v4.14 stable:
[vsp2driver]
- Rename struct fence to dma_fence.
- Rename graph and pipeline structs and functions.
- Propagate the format to the compose size.
- Add V4L2_CID_HFLIP V4L2_CID_VFLIP V4L2_CID_ROTATE support.
- Fix module autoload for OF registration.
- Fix format-info documentation.
- Clean up file handle in open() error path.
- Prevent multiple streamon race commencing pipeline early.
- Don't set WPF sink pointer.
- Fix soft reset sequence.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV for Memory Manager driver to v1.2
to apply following changes:
- Add support for Linux v4.14 stable.
- Fix compiler/checkpatch warnings.
- Disable IPMMU TLB cache function in M3N Ver1.1 due to hardware
restriction.
- Update reserved bits handling in IMTTLBR and IPMMU (MMU) initialize
sequence.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates QoS driver SRCREV for following fix:
[qos_drv]
- Feedback of static analysis tool result.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit changes following contents:
- Update IPL and Secure Monitor Rev1.0.18 rev2
- Update optee_os Rev1.0.11 rev2
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
The M3ULCB ES1.0 revision can not use CPUIdle for CA53 cores.
This commit modifies recipes to apply a patch that disables
CPUIdle support for CA53.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to install USB 3.0 firmware to
kernel source and to enable USB 3.0 in kernel image.
Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com>
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds SCHED_DEBUG config fragment to support CAS.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit upgrades Linux BSP to v3.6.0 for supporting
Kernel v4.14 stable and updating following items:
[Kernel]
- Add support for WDIOF_CARDRESET.
[Power Management]
- Add missing iounmap to rcar_avs.c.
- Add big.LITTLE CAS support.
- Add CA53 CPUIdle support.
- Add CA53 EMS support.
- Add CA53 CPUFreq support.
[Audio driver]
- Confirm rmmod command operation of snd-soc-rcar.
- Skip disabled-SSI nodes.
- Care ssi_parent_mod and remove NULL check from
rsnd_mod_name()/rsnd_mod_id().
- Revert IOMMU support so far.
- Don't use runtime->sample_bits.
- More clear rsnd_get_dalign() for DALIGN.
- Clear SSI_MODE for non TDM Extended modes.
[Display driver]
- Confirm the Fence function.
- Add support for colorkey alpha blending.
- Disable vsp1 interrupt when startup.
[DMA Engine driver]
- Fix array-bounds warning refer chcr_ts[].
[PWM driver]
- Enable PWM2 in device tree.
[USB2.0 Function]
- Fix the problem that the interrupt becomes long time when
disconnecting the USB cable.
[Video Capture driver]
- Add V4L2_FIELD_SEQ_TB/BT function support.
- Add ARGB8888 caputre format support and overflow debug message
option.
- Fix cropping procedure.
[RWDT driver]
- Add support for WDIOF_CARDRESET.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipe to support VSPBS module in R-Car Gen3.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates vsp2drv SRCREV to add M3N support for component
in WPF.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit adds a patch file for M3N support.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MMNGR driver SRCREV to add uTLB setting for M3N
when enabling IPMMU.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies graphic recipes to support M3N GFX version.
It also updates copyscript to support copying M3N GFX packages.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates QoS driver SRCREV for following fixes:
[qos_lib]
- Fix return val.
[qos_drv]
- Support M3N Ver1.0 (or later tentatively).
- And support later versions of the others (H3/M3/D3) tentatively.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies Linux BSP recipes to add more patches to support
ICCOM module.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Linux BSP has been upgraded for supporting R-Car M3N Ver.1.0 and
updating following items:
[Kernel]
- Add R-Car M3N Ver.1.0 support.
- Fix MSIOF3 and VI5_DATA13 pinmux settings.
[Audio driver]
- Don't check SSISR::DIRQ when Capture.
- Call dummy write for PW_MGMT1/3 with AK4613 when Playback.
- TDM 6ch needs 8ch clock for hw refine.
- Fix pcm-creation regression.
[Display driver]
- Fix race condition when disabling planes at CRTC stop and
add reference counting to drm_atomic_state.
- Fix register parameters passed to HDMI.
- Unconditionally call prepare_fb and remove
drm_atomic_helper_framebuffer_changed.
[DMA Engine driver]
- Fixup descriptor pointer for descriptor mode and use TCRB
instead of TCR for residue.
[Ethernet driver]
- Fix condition of phy reset.
[I2C driver]
- Fix I2C DMA reception by adding reset.
- Fix I2C DMA transmission by setting sequence.
- Fix DMA Callback processing of I2C dma mode.
- Fix handling of the STOP phase.
[MFISLock driver]
- Revert and add support for R-Car Gen3 Hardware Spinlock again.
[SD/MMC driver]
- Add identification of TAP and clock settings of HS400.
- Fix HS400 mode selection process.
- Fix SCC error check condition.
[USB2.0 Function]
- Avoid spinlock recursion.
[USB3.0 Function]
- Fix for no-data control transfer and fix Pn_RAMMAP.Pn_MPKT value.
- Fix return value of usb3_write_pipe().
- The maximum PIPEs change from 30 to 5 except PIPE0 and EP0 by H/W
specification’s change. H/W specification is fixed because it has
description mistakes.
[Video Capture driver]
- Remove VnMC setting when setting VnCSI_IFMD.
- Fix PHTW register parameter for mbps.
Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit modifies recipes to use RENESAS_DATADIR variable
for /usr/local directory instead of hard coding.
This commit comes from AGL patch.
Bug-AGL: SPEC-533
Change-Id: I865ea809c3c59ba136027fc8b99628df20c16275
Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh>
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
(cherry picked from commit 9598336fa2b4a4237255cdd866350eb7c03fdd81)
|
|
This commit updates EthernetAVB driver for following changes.
[MSE Core]
- Fix missing initialization of crf_index_network at mse_close.
- Fix to disable MPEG2-TS PCR adjustment when no PCR exist in stream.
- Fix missing parameter checking in MCH/PTP API.
- Fix the timer interrupt occurrence at an unintended timing.
- Fix the wrong feedback to clock source correction settings.
[MCH Core]
- Fix missing set error code when mch_config is invalid.
[MSE V4L2]
- Fix illegal memory access by releasing buffer being processed.
- Fix wrong log message.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates vsp2drv to fix YVU422M, YVU420M, YVU444M formats.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
VSPM driver is updated to improve performance of VSPB.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates MMNGR and MMNGRBUF drivers and libraries SRCREV
for below changes:
- Update version to v1.0.
- Improve coding style.
- Fix the condition checking in create_l1_pgtable() in driver.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates IPL components versions as below:
- Update IPL and Secure Monitor Rev1.0.16 rev4.
- Update optee_os to Rev1.0.9 rev2.
- Update optee_linuxdriver to Rev1.0.7 rev2.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
Linux BSP has been upgraded for following changes:
v3.5.8
[Audio driver]
- Fix S2R issue.
[DMA Engine driver]
- Fix S2R issue.
[USB2.0 Function]
- Fix lock variable no init
[USB Host 3.0]
- Fix support for R-Car Gen3 USB 3.0 PHY.
v3.5.7
[DMA Engine driver]
- Fix the missing spin_unlock_irqrestore.
[Display driver]
- Fix unload procedure for vsp1.
v3.5.6
[Kernel core]
- Add next-level-cache property to CA53.
- Add 12288000 for sound ADG or fix descending order of sound clock
frequency to device tree.
- Fix the audio pingroup name mismatch between sh-pfc driver and dts
to device tree.
[Power Management]
- Change the reading AVS value method.
- AVS7 opp table to device tree.
- The resume function for SYSC driver and always turn on
all power domains except CPU and GPU.
- Change sequence for judgement using fixed values or Fuse values.
[Audio driver]
- There are sampling rate patterns that can not be converted by
combination of audio clock and AK4613.
It was confirmed this is a board specifications.
However, they can be converted via alsalib.
- Control kctrl items acceptance anytime/runtime.
- SSI PIO adjust to 24bit mode.
- Unsupport 64kHz sampling rate and more with AK4613 on
Salvator-X/XS board.
[Display driver]
- Setup planes before enabling CRTC to avoid flicker.
- Use DRM core's atomic commit helper.
- Fix display list put for header mode.
- Repair vblank for DRM page flips using the VSP1.
- Wait for flip completion instead of vblank in commit tail.
- Fix completed check in write back sequence.
- Fix display starting procedure and DPLL clock divider judgement.
[PTP Clock driver]
- Fix interrupt cause bit overwrite in ravb_ptp_interrupt.
- Fix result value overwrite by a return value of ravb_ptp_interrupt().
- Fix inconsistent lock state at enabling tx timestamp.
[SATA driver]
- Fix blk_get_backing_dev_info() crash using bdev->bd_queue,
so kernel panic can be avoided in case of high load average.
[DMA Engine driver]
- Fix invalid context of sleeping function.
- Fix inconsistent lock reported by PROVE_LOCKING.
[SD/MMC]
- Add SDHI-SEQUENCER support. This is Workaround for SDHI-DMAC
restriction of R-Car H3 Ver.1.x and R-Car M3 Ver.1.0.
- Wait for CBSY instead of SCLKDIVEN.
- Disable msleep() at start/stop of SD clock.
- Discard obsolete SDIO irqs before enabling irqs.
- Relax checking for switch errors after HS200 switch.
- Replace msleep() of 20ms or less with usleep_range().
- Fix to use pre_req and post_req only for DMA transfer.
- Fix alignment check of sg buffer.
[USB2.0 Function]
- Fix return value of usbhsg_ep_disable(),
so the suspend procedure works
when the g_mass_storage enables.
- Fix NULL packet received sequence.
- Fix UGCTRL2 value for R-Car Gen3.
[USB3.0 Function]
- Protect usb3_ep->started in usb3_start_pipen(),
so kernel panic does not occur when executing iperf with g_ncm.
- Confirm an error does not occur when executing interrupt transfer
with g_zero by correcting evaluation procedure.
- Confirm g_mass_storage is recognized by Host PC after role swap.
Please use USB 2.0 cable, because role swap is compatible
with High-Speed.
- Fix free size in renesas_usb3_dma_free_prd().
- Fix zlp transfer by the dmac.
- Fix pm_runtime_enable/disable and add CONFIG_PM_SLEEP
to suspend/resume functions.
[PCIe driver]
- PCIe of R-Car Gen3 can access only 32 bit memory area at a
certain point, even if using IPMMU. This is a H/W specifications.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates SRCREV for EthernetAVB drivers for below changes:
AVB Streaming Driver
- Fix DMA-API device driver frees DMA memory with different size.
- Fix problem of can setting out of range value of 'major' parameter.
MSE Core
- Add invalid calling state checking of MSE Adapter I/F in Kernel API.
- Fix overflow problem of timer delay value calculation
by some conditions of frame rate parameter (e.g. 1/30 fps).
- Reduce idling time in streaming pipeline process by queueing of
transmission request.
- DMA allocation via dma_alloc_coherent fails without CONFIG_OF.
- Fix overrun output area in parsing of u16/u32 values.
- Fix resource leakage at probe when error occurred.
- Fix problem of can setting out of range value of 'major' parameter.
MSE V4L2
- Reduce data concatenate processing of fragment data for MPEG2-TS
and MJPEG.
- If multiple open the same video device,
print out log message of "v4l2 device is opened".
MSE CVF MJPEG
- Fix problem of EOS marker position and progressed position
mishandling in packetize buffer if condition of small picture size
of MJPEG.
- Fix issue that stream transmission speed is too slowly if the
data size per picture is huge.
MSE CVF H264
- Fix problem that the setting value of bytes_per_frame parameter is
not effects if CVF H264 format.
- Fix issue that case of H264 transmission, the stream payload data
often corrupted if the data is high bitrate.
MSE IEC61883-4
- Fix problem that streaming stopping process stall at occurred
short of data.
- Fix problem that send the broken payload stream
if no PCR value in MPEG2-TS stream.
- Fix losing trailing data when streaming stopped on Talker.
MSE ALSA
- Fix losing trailing data when streaming stopped.
- In this version, there is a difference in audio timestamp phase
by each Listener device.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
|
This commit updates VSP2 drv for following changes:
- Add __user attribute.
- Make local functions become static.
Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com>
Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
|
Mark Farrugia
Stephane Desneux
Scott Murray
Khang Nguyen
Thuy Tran
Thao Nguyen
Ronan Le Martret