summaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3
AgeCommit message (Collapse)AuthorFilesLines
2018-12-19rcar-gen3: linux-renesas: Upgrade Linux BSP to v3.9.2Duy Dang29-3301/+3493
This commit upgrades Linux BSP to v3.9.2 for the following changes: [Kernel] - Add support for RCKSEL clock selection. - Fix pin functions of R-Car E3 according to H/W UM Rev1.00 errata. - Fix warning of the make W=1 C=2. - Identify R-Car M3 Ver.1.3. - Add the big.LITTLE CAS scheduler fix patches. - Fix MOD_SEL bit numbering for R-Car E3. [Power Management] - Fixup power-domains of 3DGE for R-Car E3 Ver.1.0 and add device tree file for R-Car E3 Ver.1.0. [Audio Driver] - Fixup clock start checker. - Resolve the problem that the noise is generated during long playback with R-Car E3 Ebisu-4D board by kernel rebasing. [Display Driver] - Add function of suspend and resume to adv7511_drv.c and add hot plug event function at resume in rcar_du_drv.c. - Add depends on DRM_RCAR_DU to config DRM_RCAR_LVDS. - Revert "drm: rcar-du: Fix legacy DT to create LVDS encoder nodes". - Add clock function for LVDS PLL. [Ethernet Driver] - Decrease TxFIFO depth of Q3 and Q2 to one. - Fix not to call phy_resume() if PHY is not attached and add toggling phy reset if PHY is not attached. - Revert "ravb: RX checksum offload" for communicating of Q-Tag VLAN frame correctly. - Resolved the problem that the S2RAM resume failed on R-Car E3 Ebisu-4D by kernel rebasing. - Avoid unsupported internal delay mode for R-Car E3 and limit to 100Mbps. [I2C Driver] - Check bus state before reinitializing. [IPMMU Driver] - Fix crash on early domain free. - Revert "arm64: defconfig: Enable QCOM_IOMMU" for suspending with LTSI kernel. - Correct whitelist devices assignment. [PCIe Driver] - Avoid PCI device removing/rescanning through sysfs triggers a deadlock. [PWM Driver] - Avoid deadlock warning when removing PWM device. [SD/MMC Driver] - Fix card initialization failure in high speed mode. - Add adjust HS400 offset by manual calibration mode and adjust HS400 offset by manual calibration mode for R-Car M3 Ver.1.3. [USB2.0 Function] - Add reset_control. - Backport upstream patches to support OTG mode for R-Car E3. - Make DMAC system sleep callbacks explicit. - Add Super-Speed (b-device) support. [Video Capture driver] - Review adv748x driver for R-Car E3 Ebisu board and add option for changing SD output route to TXA. - Revert "rcar-vin: rcar-csi2: Add blank margin when caluculating bit rate" and fix pixel rate values. - Add CPG reset and release when using digital pin. [RWDT Driver] - Don't keep timer value during suspend/resume. - Don't set divider while watchdog is running. This also updates ADSP driver patches to adapt to the new Linux version. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xv@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-12-19rcar-gen3: machine: Add Ebisu 1.0 device treeDuy Dang1-0/+2
This commit adds more device trees for Ebisu 1.0 and Ebisu-4D 1.0: - r8a77990-es10-ebisu-4d.dts - r8a77990-es10-ebisu.dts Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-12-19rcar-gen3: machine: Build multiple U-Boot binaries for Salvator-X/XSDuy Dang1-6/+11
This commit enables U-Boot configuration to build all binaries for Salvator-X and Salvator-XS boards. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: conf: Enable PAM distro feature for BSP minimalKhang Nguyen8-0/+24
This commit enables PAM distro feature for BSP minimal configurations, its target is to support LTP test on core-image-minimal. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: conf: Change default SoC in local-ltp.conf to r8a7795Khang Nguyen2-4/+4
This commit changes the default SoC in local-ltp.conf to r8a7795. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: conf: Remove H3_OPTION from build configurationsKhang Nguyen10-80/+0
IPL and U-boot were built all binaries of H3 DRAM configurations at one time. Hence, H3_OPTION was not used anymore. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: conf: Enable USB3H as default for EbisuKhang Nguyen8-8/+8
This commit enables USB3H as default for Ebisu. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: path-common: Using operator ?= for RENESAS_DATADIRRonan Le Martret1-1/+1
RENESAS_DATADIR must be able to be overwritten. Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: iccom-user-module: Remove iccom-control requirementDuy Dang1-1/+0
The iccom user module recipe requires iccom-control.inc file which defines USE_ICCOM variable, but nothing uses it. This commit removes that requirement. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: iccom-tp-user-module: Add new sample test programKhang Nguyen1-0/+5
This commit modifies recipe to add a new sample test program binary (sample_pvconv) to rootfs. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: gstreamer: Update SRCREV to follow the latest versionKhang Nguyen3-3/+3
This commit modifies gstreamer recipes for following updates: [gst-omx] - Fix issue of seeking with dynamic change in dmabuf mode. - Support dynamic change in src pad. - Move initial and free arrays which used for use-dmabuf's handling from init and finalize to start and stop. - Improve log and free memory in error case. [gst-plugins-good] - Static analysis: Remove duplicated condition. [gst-plugin-vspfiler] - Don't reinitialize colorimetry table if it has already been set up. - Fix memory leak. - Do not set colorimetry to out structure containing in format. - Modify variable type. - Fix initialization of GValue. - Remove last commma in enum. - Change position of declaration to beginning of the function. - Change variable name to avoid duplication of declarations. - Fix copyright years in header. - Intersect format in fixate_caps(). - Fix possible segmentation fault during caps fixation. - Support colorimetry negotiation. - Add option for setting input buffer color range. - Support encoding and color range setting. - Reduce arguments of set_vsp_entities(). - Modify transfrom_caps() for more accurate operation. - Delete unnecessary variable in transform_caps(). - Modification of variable type. - Measure for converting odd size rgb buffer to yuv. - Implement measure for odd size yuv buffer input. - Change the order of linking and set format. - Delete unnecessary wpf linking. - Deactivate input bufferpool before remake. - Don't make new output pool when it exists already. - Change the state of flag of playing when stop streaming. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: gles-user-module: Add depends on mesa to gles-user-moduleRonan Le Martret1-0/+3
The populate_sysroot of gles-user-module must depends on the populate_sysroot of the virtual/mesa, because header from gles-user-module depends on the header from virtual/mesa. Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: gles-user-module: Remove redundant "virtual/egl" in PROVIDESDuy Dang1-1/+1
gles-user-module provides virtual/egl in order to use in core-image-x11 which is not supported anymore, virtual/egl is now provided by libegl. This commit removes virtual/egl in PROVIDES list. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: avb-applications: Remove avb-control.inc requirementDuy Dang1-1/+0
This recipe requires avb-applications.inc which defines USE_AVB variable, but nothing uses it. So it is safe to remove that requirement. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: gstreamer-omx: Add RDEPENDS on omx-user-moduleRonan Le Martret1-1/+2
gstreamer-omx should RDEPENDS on omx-user-module, and not on libomxil. Signed-off-by: Ronan Le Martret <ronan.lemartret@iot.bzh> Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: adsp-module: Use distro features checkDuy Dang2-4/+8
This commit changes to use distro_features_check class to show the correct error message when building adsp modules without its distro feature in local.conf: | ERROR: Nothing PROVIDES 'adsp-fw-module' | adsp-fw-module was skipped: missing required distro feature 'adsp' (not in DISTRO_FEATURES) The USE_ADSP variable is not used anymore in the recipes. It is safe to remove adsp-control.inc requirement. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: dvd-user-module: Remove redundant codeKhang Nguyen1-1/+1
This commit removes a redundant code in dvd-user-module recipe. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: cms-user-module: Upgrade library versionsKhang Nguyen1-6/+6
This commit upgrades library versions as below: libcmsbcm.so.1.8.0 upgrades to libcmsbcm.so.1.9.0 libcmsblc.so.1.8.0 upgrades to libcmsblc.so.1.9.0 libcmsdgc.so.1.8.0 upgrades to libcmsdgc.so.1.9.0 Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: copyscript: Update MD5SUM for CMS packagesKhang Nguyen1-3/+3
This commit updates MD5SUM for new CMS packages. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: copyscript: Update MD5SUM for video packagesKhang Nguyen1-16/+16
This commit updates MD5SUM for new video packages. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: copyscript: Update MD5SUM for audio packagesKhang Nguyen1-13/+13
This commit updates MD5SUM for new OMX audio packages. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: copyscript: Update MD5SUM for ADSP packagesKhang Nguyen1-3/+3
This commit updates MD5SUM for new ADSP packages. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: vspmif-module: Correspond boards that do not support Full HDKhang Nguyen2-0/+77
This commit applies a fix patch to correspond boards that do not support Full HD. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: V4L2/VSPM: Update SRCREV to follow the latest versionKhang Nguyen4-4/+4
This commit updates V4L2/VSPM SRCREV for following updates: [vsp2driver] - Support the expression for color space conversion. - Fix minimum input pixel size for RGB format to 1 pixel. [vspm_drv] - Move function definitions out of vspm_cmn.h. - Fix macro name to register name. [vspmif_drv] - Convert user_data and cb_func to user pointers. - Remove __user macro from the variable declaration. [vspmif_lib] - Add prototypes for VSP Manager API. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: weston: Update SRCREV to follow the latest versionKhang Nguyen1-1/+1
This commit updates SRCREV of weston for following items: [v4l2-renderer] - Use uint8_t* for variables to be operated by pointer. - Apply to "U" suffix constatnt of unsigned type. - Fix according to static code analysis tool. - Improve attaching shm buffer. - Use stride of shm buffer, not of KMS BO. - Remove bytesused from v4l2_renderer_plane. - Use length instead of byteused. - Set -1 when closing dmabuf. - Remove unused members in v4l2_surface_state. - Remove unused member bpp. - Free buffers queued into RPF which is disabled. - Allow set image width/height to 1 for input VSP in using RGB. - Skip rendering the surface which buffer isn't attached. - Expand damage region when using YUV444 and YVU444 color format. - Expand damage region when using multi sample pixels format. - Make opaque region the same as non-opaque. - Don't release dmabuf buffer immediately when client release buffer. [compositor-drm] - Use bool type for flag for using v4l2-renderer. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: kernel-module-qos: Update SRCREV for QoS driverKhang Nguyen1-1/+1
This commit updates QoS driver SRCREV for following item: [qos_drv] - Feedback of static analysis tool result. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: kernel-module-uvcs: Remove redundant variableDuy Dang1-2/+1
There is no reason to use UVCS_SRC variable for the source URI instead of pointing directly. So this commit removes it. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: kernel-module-qos: Fix a typoDuy Dang1-1/+1
This commit fixes a typo in recipe comment. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: kernel-module-iccom: Remove iccom-control.inc requirementDuy Dang2-2/+0
Kernel module ICCOM recipe requires iccom-control.inc which only defines USE_ICCOM, but nowhere in the recipe uses this variable. This commit removes the unneeded requirement. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: kernel-module-xtensa-hifi: Use distro features checkDuy Dang1-3/+4
The improper error occurs when building Kernel module ADSP without its distro feature enabled in local.conf: | ERROR: kernel-module-xtensa-hifi-1.0-r0 do_populate_lic: QA Issue: kernel-module-xtensa-hifi: LIC_FILES_CHKSUM points to an invalid file This commit modifies recipe to use distro_features_check class that provides the proper error: | ERROR: Nothing PROVIDES 'kernel-module-xtensa-hifi' | kernel-module-xtensa-hifi was skipped: missing required distro feature 'adsp' (not in DISTRO_FEATURES) Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: copyscript: Update MD5SUM for ICCOM packagesKhang Nguyen1-2/+2
This commit updates MD5SUM for new ICCOM packages. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: IPL: Support generating all variants of IPL binariesThuy Tran2-13/+60
This commit provides the capability to generate IPL binaries for H3/H3ULCB/E3 build variants at the same time. - For H3 SiP - *.srec: use for H3 SiP DDR 4GiB (1GiB x 4ch) - *-4x2g.srec: use for H3 SiP DDR 8GiB (2GiB x 4ch) - *-2x2g.srec: use for H3 SiP DDR 4GiB (2GiB x 2ch) - For H3ULCB SiP - *.srec: use for H3ULCB SiP DDR 4GiB (1GiB x 4ch) - *-4x2g.srec: use for H3ULCB SiP DDR 8GiB (2GiB x 4ch) - For E3 SiP - *.srec: use for E3 SiP DDR 1GiB - *-4d.srec: use for E3 SiP DDR 2GiB Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: IPL: Upgrade IPL version according to BSP v3.8.0Khang Nguyen7-434/+4
This commit updates IPL and Secure Monitor to Rev1.0.23 rev2 for the following changes: [IPL] - plat: rcar: BL2: Correct MMU configuration. - plat: rcar: Fix suspicious line in platform.mk. - Change the definition value of BL2_LIMIT to end of System RAM. - Update IPL boot message. - Version up the base version to v1.5 of arm-trusted-firmware. - Update DDR setting (rev.0.34). - Modify the alignment of l2_tzram_layout to CACHE_WRITEBACK_GRANULE. - Update H3 Ver.3.0 QoS setting rev.0.08. - Update M3N Ver.1.1 QoS setting rev.0.07. - Update E3 Ver.1.0 QoS setting rev.0.03. - Fix the system WDT detection log is not output when D-Cache is enabled. - Change the timer counter of micro_wait to the Generic Timer. - Fix to log the timestamp at beginning of line. - Change the timer counter for processing time measurement to the Generic Timer. - Modify the DDR log output of IPL boot message. [Secure Monitor] - Version up the base version of arm-trusted-firmware. https://github.com/ARM-software/arm-trusted-firmware Commit ID ed8112606c54d85781fc8429160883d6310ece32 [Tag: v1.5] - Backport the workaround for CVE-2018-3639. Update optee_os Rev1.0.16 rev2 - Fix a contxt size allocated by OP-TEE OS with HW engine. - Fix to exclusive control in ECDSA operation used by HW engine. - Fix to set the initial value for a parameter in TEE_AEInit. - Fix to clear the read cache of standalone_fs_create. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: u-boot: Support deploying multiple u-boot binariesKhang Nguyen2-23/+27
This commit updates recipes to support deploying multiple u-boot binaries of Salvator-XS, H3ULCB and Ebisu boards. It also removed uboot-control.inc which is no longer used. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: u-boot: Update u-boot according to BSP v3.8.0Khang Nguyen2-6/+23
This commit updates u-boot according to BSP v3.8.0. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: u-boot: Backport u-boot v2018.09 upstreamKhang Nguyen5-36/+329
This commit backports u-boot v2018.09 upstream to Yv3.13.0. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: linux-renesas: Add support ADSP ALSA driverKhang Nguyen11-0/+14988
This commit modifies recipes to support building ADSP ALSA driver when enabling adsp distro feature. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: linux-renesas: Update device tree to support ADSP ALSA driverKhang Nguyen14-0/+500
This commit applies device tree rollback patches to support ADSP ALSA driver. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: linux-renesas: Upgrade Linux BSP to v3.8.0Khang Nguyen3-53/+94
This commit upgrades Linux BSP to v3.8.0 for the following updates: [Kernel] - Fix CPG definitions of R-Car H3/M3N/E3 for H/W manual Rev.1.00. - PFC definitions of R-Car H3/M3N/E3 for H/W manual Rev.1.00. - Fix R-Car H3/M3N/E3 module clock system mistake. [Audio driver] - Fixup not to call clk_get/set under non-atomic. - Fixup SSI clock during suspend/resume modes. [Display driver] - Don't use TV sync mode when not supported by the hardware. - Add clock driver registration for LVDS PLL. [SATA driver] - Fix really mask all interrupts on Gen2 and later. [SD/MMC driver] - Add adjust HS400 offset by manual calibration mode. - Change HW adjustment register according to speed mode. [Video Capture driver] - Fix PHTW register procedure and VnCSI_IFMD register access for R8A77990. - Fix scaling judgement condition of #181156 patch. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29Revert "rcar-gen3: linux-renesas: WORKAROUND for mini SD card issue on M3ULCB"Khang Nguyen4-234/+0
The Kernel source has been updated. This reverts commit 8b090e008ef2c4cb9a97c20426f1ac03f9f15555. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-29rcar-gen3: machine: Update configurations according to u-boot v2018.09Khang Nguyen4-13/+21
This commit updates machine configurations for the following items: - Upgraded u-boot to v2018.09. - Added supporting Ebisu 4D 2GiB board. - Enabled building multiple u-boot configurations for H3 Salvator-XS, Ebisu and H3ULCB. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: README: Use Markdown formattingDuy Dang4-198/+229
This commit edits README files to use Markdown formatting. There are also some modifications: - Removed dependency on meta-renesas itself in meta-rcar-gen3/README.md and meta-rcar-gen3/README.linaro - Added E3 SoC information to meta-rcar-gen3/README.md - Replaced core-image-x11 by core-image-minimal in README.md, this image is not maintained. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: conf: Add local-ltp.conf to support LTPKhang Nguyen2-0/+562
This commit adds local-ltp.conf base on BSP minimal configuration, it supports building the image to run LTP test. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: base-files: Do not override LD_LIBRARY_PATH variableThuy Tran1-1/+1
This commit modifies recipe to avoid overriding LD_LIBRARY_PATH environment variable. Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: copyscript: Update md5sum for video packagesKhang Nguyen1-16/+16
This commit updates the md5 checksum list of OMX video codec packages. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: ncurses: Use % suffix instead of specific versionsDuy Dang1-0/+0
Keep naming consistency and ensure they are still applied when the upstream recipes are updated. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: gles-user-module: Keep rc.pvr in rootfsDuy Dang1-0/+1
Yv2.19.0 renamed rc.pvr to pvrinit. This commit copies the rc.pvr original file to rootfs for reference. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: mmngr: Upgrade mmngr driver versionDuy Dang1-1/+1
This commit upgrades mmngr driver version to v1.5 to fix static analysis warnings. Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: EthernetAVB: Update SRCREV to follow the latest versionKhang Nguyen2-2/+2
This commit updates SRCREV of EthernetAVB components for following changes: - Fix buffer overflow when write_stq. - Fixes NULL pointer dereference at streaming stopping. - Fix wrong output position calculation. - Add mse_is_buffer_empty to clarify. - mse_trans_complete change to select target buf_list. - delay_time value to set in all usecases. - Split setup logic of PTP Timer and Capture. - Add utilitity macro PTP_TIME_DIFF_S32. - Add output timing adjust feature on video listener. - Add upper limit and change default value for tx/rx delay time. - Add header overhead in calc_cbs_by_bitrate. - Add MSE_TRANSMIT_MODE for MPEG2TS usecase. - Revise calculation of the AVTP timestamp. - Add transmit timing adjust feature on MPEG2TS talker. This also fixes the issue in which streaming data is not smooth and hang-up. Signed-off-by: Khang Nguyen <khang.nguyen.xw@renesas.com> Signed-off-by: Duy Dang <duy.dang.yw@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-10-26rcar-gen3: OP-TEE: Drop python-wand and imagemagickThuy Tran2-5/+2
From optee 2.6.0 release [1], they do not use python-wand anymore. It also adds inherit pythonnative to optee-client to follow upstream version. [1] meta-linaro rev: 837fb7d048a30baa6356d3ceb493ec20074b8785 Signed-off-by: Thuy Tran <thuy.tran.xh@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>