aboutsummaryrefslogtreecommitdiffstats
path: root/meta-rcar-gen3
AgeCommit message (Collapse)AuthorFilesLines
2018-03-22rcar-gen3: wayland-kms: Update for supporting E3 boardKhang Nguyen1-1/+1
This commit updates recipe to add ebisu into COMPATIBLE_MACHINE. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: weston: Update SRCREV to follow the latest versionKhang Nguyen1-1/+1
This commit updates SRCREV of weston for following items: v4l2-renderer - Update Renesas Electronics copyright. - Use premultiplied alpha for ARGB color format. - Apply only translation to surface opaque region. - Compose whole of output when V4L2_SEL_TGT_COMPOSE unsupported for WPF. - Compose damaged region only. - Use bool type for flags instead of int type. - Enclose v4l2-renderer-device.h in an inclusion guard. - Apply surface transformation to opaque region. - Prevent misalignment of the rendering image due to calculation error. vsp2-renderer - Fix a typo in a comment. - Fallback to GL when global alpha is enabled with opaque region. - Remove unnecessary condition in rendering image. - Always turn off media streaming. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: copyscript: Update MD5SUM for ICCOM packagesKhang Nguyen1-3/+3
This commit updates MD5SUM values for new ICCOM packages. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: arm-trusted-firmware: Update SRCREV to follow the latest versionKhang Nguyen1-1/+1
This commit updates IPL and Secure Monitor to Rev1.0.19 rev2 for following changes: [IPL] - Add processing of Suspend To RAM for E3. - Update DDR setting for E3(rev0.06). - Update E3 Ver1.0 QoS setting rev.0.02. - Update M3N Ver.1.0 QoS setting rev.0.06. - Fix the LSI_CUT judgement of PFC setting. - Change definition of end address of system ram for BL2. [Secure Monitor] - Fix the primary CPU decision function that runs at startup. - Change the SelfRefresh sequence of Suspend To RAM. - Add the DVFS SCL setting of E3. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: kernel-module-qos: Update SRCREV for QoS driverKhang Nguyen1-1/+1
This commit updates QoS driver SRCREV for following item: [qos_drv] - Support E3 Ver1.0 (or later tentatively). Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: IPL: Update IPL according to BSP v3.6.1 and add support E3Khang Nguyen3-5/+6
This commit changes following contents: - Update IPL and Secure Monitor Rev1.0.19. - Update optee_os Rev1.0.12. It also updates recipes to add support E3 board. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: u-boot: Update SRCREV to follow the latest versionKhang Nguyen1-2/+2
This commit updates u-boot SRCREV for following changes: - Add I2C setting for reset by PMIC for E3. - Add reset command support by using PMIC for E3. - Fix pinmux_config_regs array for E3. - Add clock stops before boot os for E3. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: linux-renesas: Ensure only build CAS with H3 or M3 SoCKhang Nguyen2-1/+19
CAS only supports H3 (SoC: r8a7795), M3 (SoC: r8a7796). This commit adds a python function to disable CAS automatically and show the warning message as below in case of wrong setup. | WARNING: linux-renesas-4.14.0+gitAUTOINC+4a7e26bdbc-r1 do_cas_checking: | CAS only supports H3 (SoC: r8a7795), M3 (SoC: r8a7796), this feature will be disabled automatically Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: linux-renesas: Enable RPMSG_VIRTIO config depend on ICCOMKhang Nguyen5-0/+72
This commit modifies recipe to enable RPMSG_VIRTIO config depend on ICCOM distro feature. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: linux-renesas: Add support E3 and upgrade Linux BSP to v3.6.1Khang Nguyen3-8/+11
This commit adds support E3 and upgrades Linux BSP to v3.6.1 for the following updates: [Kernel] - Add R-Car E3 support. - Fix Gfx clock. [Power Management] - Register clock for all cpu nodes for R-Car H3 to device tree. - Improve to build only when enabling RCAR_POWER_AVS. - Update IPA for CA53, need tune "contribution" parameter. - Fix section mismatch build warnings. - Fix double source of drivers/soc/renesas/Kconfig. [Display driver] - Fix continuous mode for dual pipelines. - Fix DISP interrupt enable order, DPPR register set order and LVDS startup sequence. - Fix LVDS startup on R-Car Series, 3rd Generation. - Fix LVDS stop sequence. [DMA Engine driver] - Fix max_chunk_size for R-Car Series, 3rd Generation. - Check the done lists in rcar_dmac_chan_get_residue(). [I2C driver] - Fix the problem that the strange data transfers with DMA transmit. [IPMMU driver] - Fix sequence issue. [SD/MMC driver] - Fix handling of SET_BLOCK_COUNT for RPMB. [USB3.0 Function] - Fix oops in renesas_usb3_remove(). - Don't print a warning when setting link state for disabled ports. [Video Capture driver] - Fix transfer rate and phy register value. Add CPG reset release procedure. - Add bytes per line when opening device. - Fix power management procedure when resuming. - Add MSTP status check after CPG reset. - Fix division procedure for __udivdi3 error. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22Revert "rcar-gen3: linux-renesas: Fix M3ULCB hangs up when playing video"Khang Nguyen4-126/+0
Linux BSP v3.6.1 has been updated. This reverts commit f8e4fb869abdfac3211b5f933202644901eeac7a. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: README.linaro: Add information for E3Khang Nguyen1-9/+38
This commit adds building instructions with Linaro GCC for E3 board. It also updates information from krogoth to rocko and adds eLinux.org reference information for R-Car Gen3 board. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: README: Add information for E3Khang Nguyen1-1/+12
This commit adds information for new R-Car Gen3 board (Ebisu). It also adds eLinux.org reference information for R-Car Gen3 board. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-03-22rcar-gen3: machine: Add support for E3Khang Nguyen3-0/+63
This commit updates recipes to support R-Car E3 board (SoC: R8A77990) Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30Revert "rcar-gen3: run-postinsts: WORKAROUND to fix dependency failed for ↵upstreamThuy Tran1-5/+0
serial getty" This fix is not necessary for rocko branch. Hence, we can remove it. This reverts commit 7acbf5e2f99c59478adbc73c6a40d314589a3009. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30Revert "rcar-gen3: opkg: WORKAROUND to fix dependency failed for serial getty"Thuy Tran1-5/+0
This fix is not necessary for rocko branch. Hence, we can remove it. This reverts commit 149da3d318e971d9abb03ded59da7727cffaec08. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30Revert "rcar-gen3: dpkg: WORKAROUND to fix dependency failed for serial getty"Thuy Tran1-5/+0
This fix is not necessary for rocko branch. Hence, we can remove it. This reverts commit b0520f15aa887e78c7967a6abd370730658de031. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30Revert "rcar-gen3: systemd: WORKAROUND to fix timeout dev-ttySN.device"Thuy Tran2-14/+0
This fix is not necessary for rocko branch. Hence, we can remove it. This reverts commit d6eff077c4a3afbe39f8ee1b2ad1a19a716ce31c. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30Revert "rcar-gen3: net-tools: Fix compile error when build with kernel 4.8 ↵Thao Nguyen2-59/+0
and 4.9" net-tools has been updated to fix this issue. This reverts commit ed74f73cbb6194e88e1ec3502e58e87adf38ed5e. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30Revert "rcar-gen3: ppp: Add patches to fix build with 4.8/4.9 kernel headers"Thao Nguyen3-93/+0
ppp has been updated to fix this issue. This reverts commit 4979e05406c77524cf90b308ce4bf2a72032ee65. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: ccache: Remove v3.2.4 bbappendThao Nguyen1-3/+0
ccache in poky is upgrade to v3.3.4. The fix in v3.2.4 does not need anymore. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: conf: Remove cpio.gz format archiveThuy Tran4-4/+3
cpio.gz has a limitation about size. If rootfs size is larger than 2GB, do_image_cpio will fail. Therefore, this commit removes cpio.gz in our implementation. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: xserver-xorgs: Remove glamor in PACKAGECONFIGThao Nguyen1-0/+3
Glamor was enabled by default by below commit: Title : xserver-xorg: Enable glamor by default Auther: Saul Wold <sgw@linux.intel.com> Commit: 837fd055117f2e4c5c40162abe2e04eaabfeacde However, with current env, this feature will get following error: | checking for linux/apm_bios.h... yes | checking for xf86dgaproto >= 2.0.99.1... yes | checking for xf86dgaproto >= 2.0.99.1... yes | checking for xf86dgaproto >= 2.0.99.1 xf86vidmodeproto >= 2.2.99.1... yes | checking for epoxy... yes | checking for "gbm >= 10.2.0"... no | configure: error: Glamor for Xorg requires gbm >= 10.2 Glamor is not necessary with current env, so disable it. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: libwebp: Remove bbappend for libwebpThao Nguyen2-17/+0
This issue does not occur on YP 2.4. Hence, the solution can be deleted. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: dbus: WORKAROUND to fix memory leak issueKhang Nguyen1-0/+12
In Yocto v3.4.0, memory leak occurs when restarting Weston: | root@salvator-x:~# cat /proc/meminfo | grep Cma | CmaTotal: 671744 kB | CmaFree: 629788 kB | root@salvator-x:~# | root@salvator-x:~# systemctl restart weston | root@salvator-x:~# | root@salvator-x:~# cat /proc/meminfo | grep Cma | CmaTotal: 671744 kB | CmaFree: 599404 kB It will make Weston crash because out of memory if restarting many times. This patch is a WORKAROUND to avoid the issue, it restarts dbus depend on Weston and memory will be released properly. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: gles-user-module: WORKAROUND to fix compile error because of ↵Thao Nguyen2-0/+52
lacking GLES3/gl3ext.h Gstreamer1.0-plugins-bad requires GLES3/gl3ext.h, which should be provided by gles-user-module. However, current GFX libraries do not have GLES3/gl3ext.h. Hence, temporarily add GLES3/gl3ext.h from mesa to gles-user-module to overcome this issue. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: README: Update for rocko branchThao Nguyen2-9/+26
- Change supported branch from krogoth to rocko. - Change package type from IPK to RPM. - Add M3N information. - Add new features in Yv3.4.0. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: conf: Update to enable USB 3.0Thuy Tran8-0/+24
This commit supports enabling USB 3.0 for Salvator-X board. To enable it, please uncomment MACHINE_FEATURES_append = " usb3" in local.conf. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: conf: Add to support CAS featuresThuy Tran24-0/+72
This commit supports enabling CAS features for R-Car Gen3. To enable it, please uncomment MACHINE_FEATURES_append = " cas" in local.conf. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: conf: Modify sample configurationsThuy Tran30-193/+2305
This commit modifies sample configurations for Salvator-X and ULCB to build with YP2.4 rocko. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: conf: Add more layers to build LTP pkgsThuy Tran12-0/+24
With YP 2.4, to build LTP packages, libmnl is required. libmnl is provided by meta-openembedded/meta-networking. meta-openembedded/meta-networking will request meta-openembedded/meta-python. Hence, we need to add 2 layers to bblayers. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: copyscript: Update year of copyrightThuy Tran2-2/+2
This commit updates year of copyright in copyscript. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: copyscript: Update Crypto package namesThuy Tran2-4/+4
Crypto packages have been updated. This commit modifies its name in copyscript. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: copyscript: Update DTV/DVD new package namesThuy Tran3-12/+12
DTV/DVD packages have been updated. This commit modifies its name in copyscript. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: copyscript: Update MD5SUM for CMS new packagesThuy Tran3-9/+9
This commit modifies MD5SUM values in copyscript for CMS new packages. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: copyscript: Update MD5SUM for Video/Audio packagesThuy Tran3-85/+93
This commit updates MD5SUM values for OMX Video/Audio packages. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: copyscript: Update MD5SUM for ADSP packagesThuy Tran3-9/+9
This commit updates MD5SUM values for ADSP packages to latest release. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: perl: Ship perl modules into native SDK sysrootKhang Nguyen1-0/+2
This commit modifies recipe to ship all perl modules into native SDK sysroot. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: nativesdk-packagegroup-sdk-host: Install perl to SDKThao Nguyen1-0/+1
In rocko, perl packages for host PC have been removed from default SDK, so this commit adds perl and perl-dev for host PC into Yocto SDK. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: core-image-renesas-base: Add coreutils packageKhang Nguyen1-0/+1
This commit adds coreutils package into rootfs. Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: core-image-renesas-base: Add libx11-locale to rootfsThao Nguyen1-0/+1
Libx11-locale will provide more language pkgs to the current system. Signed-off-by: Thao Nguyen <thao.nguyen.yb@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: kernel-module: Do not override KERNEL_MODULE_AUTOLOAD variableThuy Tran3-3/+3
According to YP Manual, we can use the KERNEL_MODULE_AUTOLOAD variable anywhere that it can be recognized by the kernel recipe or by an out-of-tree kernel module recipe. Therefore, KERNEL_MODULE_AUTOLOAD is a global list, so it should be used "+=" or "_append". Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: kernel-module-vsp2driver: Fix missing vsp2 kernel module ↵Thuy Tran1-0/+1
configuration in rootfs This commit modifies recipe to add vsp2.conf file under /etc/modules-load.d/ directory into rootfs after changing kernel module package names in YP2.4. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: kernel-module-gles: Fix missing PowerVR GPU kernel module in rootfsThuy Tran1-0/+4
This commit modifies recipe to ship kernel module of PowerVR GPU into rootfs after changing kernel module package names in YP2.4. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: kernel-module: Set KERNEL_MODULE_PACKAGE_SUFFIX to fix building ↵Thuy Tran18-0/+54
kernel modules From YP2.3 [1], kernel module packages are now suffixed with the kernel version in order to allow module packages from multiple kernel versions to co-exist on a target system. We can return to the previous naming scheme that does not include the version suffix by setting KERNEL_MODULE_PACKAGE_SUFFIX to blank to build modules without suffix. [1] http://www.yoctoproject.org/docs/2.3/ref-manual/ref-manual.html#migration-2.3-miscellaneous-changes Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: CMS: Update CMS new package namesThuy Tran1-9/+9
CMS new packages have been released. This commit modifies recipe to add them. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: omx-control: Add a python function to check build vp9dec_lib with M3NKhang Nguyen1-0/+12
vp9dec_lib only supports M3N (SoC: r8a77965), this commit adds a trap to prevent building this library with other SoC, in case of wrong setup, it will cause the error as | ERROR: omx-user-module-1.0-r0 do_vp9_checking: vp9dec_lib only supports M3N (SoC: r8a77965), please disable this feature in your local configuration | ERROR: omx-user-module-1.0-r0 do_vp9_checking: Function failed: do_vp9_checking Signed-off-by: Khang Nguyen <khang.nguyen.xv@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: omx-user-module: Update OMX Audio/Video packagesThuy Tran2-56/+105
This commit updates OMX Audio/Video new package names. Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: omx-user-module: Correct build tree setup for YP 2.2 mortyStephen Lawrence1-2/+2
The change directory parameter of the tar utility acts on the parameters that follow it. Correct the ordering so that the setup_build_tree() task extracts the omx tar balls to the right location. Fixes a build error that would otherwise occur in yp 2.2 morty. (cherry picked from commit 9f0211bafb118e81ec2fd6dd82b5777964b1ac9b) Signed-off-by: Stephen Lawrence <stephen.lawrence@renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>
2018-01-30rcar-gen3: openavnu: Rename to follow upstream project nameMasaru Nagai3-3/+3
This commit changes open-avb to openavnu name. Signed-off-by: Masaru Nagai <masaru.nagai.vx@renesas.com> Signed-off-by: Thuy Tran <thuy.tran.xh@rvc.renesas.com> Signed-off-by: Takamitsu Honda <takamitsu.honda.pv@renesas.com>