path: root/meta-rcar-gen3/docs/sample/conf/h3ulcb/poky-gcc/mmp/local-wayland.conf

#
# This file is your local configuration file and is where all local user settings
# are placed. The comments in this file give some guide to the options a new user
# to the system might want to change but pretty much any configuration option can
# be set in this file. More adventurous users can look at local.conf.extended
# which contains other examples of configuration which can be placed in this file
# but new users likely won't need any of them initially.
#
# Lines starting with the '#' character are commented out and in some cases the
# default values are provided as comments to show people example syntax. Enabling
# the option is a question of removing the # character and making any change to the
# variable as required.

#
# Machine Selection
#
# You need to select a specific machine to target the build with. There are a selection
# of emulated machines available which can boot and run in the QEMU emulator:
#
#MACHINE ?= "qemuarm"
#MACHINE ?= "qemuarm64"
#MACHINE ?= "qemumips"
#MACHINE ?= "qemumips64"
#MACHINE ?= "qemuppc"
#MACHINE ?= "qemux86"
#MACHINE ?= "qemux86-64"
#
# There are also the following hardware board target machines included for 
# demonstration purposes:
#
#MACHINE ?= "beaglebone-yocto"
#MACHINE ?= "genericx86"
#MACHINE ?= "genericx86-64"
#MACHINE ?= "mpc8315e-rdb"
#MACHINE ?= "edgerouter"
#
# This sets the default machine to be qemux86-64 if no other machine is selected:
MACHINE ??= "h3ulcb"

#
# Where to place downloads
#
# During a first build the system will download many different source code tarballs
# from various upstream projects. This can take a while, particularly if your network
# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
# can preserve this directory to speed up this part of subsequent builds. This directory
# is safe to share between multiple builds on the same machine too.
#
# The default is a downloads directory under TOPDIR which is the build directory.
#
#DL_DIR ?= "${TOPDIR}/downloads"

#
# Where to place shared-state files
#
# BitBake has the capability to accelerate builds based on previously built output.
# This is done using "shared state" files which can be thought of as cache objects
# and this option determines where those files are placed.
#
# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
# from these files if no changes were made to the configuration. If changes were made
# to the configuration, only shared state files where the state was still valid would
# be used (done using checksums).
#
# The default is a sstate-cache directory under TOPDIR.
#
#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"

#
# Where to place the build output
#
# This option specifies where the bulk of the building work should be done and
# where BitBake should place its temporary files and output. Keep in mind that
# this includes the extraction and compilation of many applications and the toolchain
# which can use Gigabytes of hard disk space.
#
# The default is a tmp directory under TOPDIR.
#
#TMPDIR = "${TOPDIR}/tmp"

#
# Default policy config
#
# The distribution setting controls which policy settings are used as defaults.
# The default value is fine for general Yocto project use, at least initially.
# Ultimately when creating custom policy, people will likely end up subclassing 
# these defaults.
#
DISTRO ?= "poky"
# As an example of a subclass there is a "bleeding" edge policy configuration
# where many versions are set to the absolute latest code from the upstream 
# source control systems. This is just mentioned here as an example, its not
# useful to most new users.
# DISTRO ?= "poky-bleeding"

#
# Package Management configuration
#
# This variable lists which packaging formats to enable. Multiple package backends
# can be enabled at once and the first item listed in the variable will be used
# to generate the root filesystems.
# Options are:
#  - 'package_deb' for debian style deb files
#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
#  - 'package_rpm' for rpm style packages
# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
# We default to rpm:
PACKAGE_CLASSES ?= "package_rpm"

#
# SDK target architecture
#
# This variable specifies the architecture to build SDK items for and means
# you can build the SDK packages for architectures other than the machine you are
# running the build on (i.e. building i686 packages on an x86_64 host).
# Supported values are i686 and x86_64
#SDKMACHINE ?= "i686"

#
# Extra image configuration defaults
#
# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
# images. Some of these options are added to certain image types automatically. The
# variable can contain the following options:
#  "dbg-pkgs"       - add -dbg packages for all installed packages
#                     (adds symbol information for debugging/profiling)
#  "src-pkgs"       - add -src packages for all installed packages
#                     (adds source code for debugging)
#  "dev-pkgs"       - add -dev packages for all installed packages
#                     (useful if you want to develop against libs in the image)
#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
#                     (useful if you want to run the package test suites)
#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
#  "tools-debug"    - add debugging tools (gdb, strace)
#  "eclipse-debug"  - add Eclipse remote debugging support
#  "tools-profile"  - add profiling tools (oprofile, lttng, valgrind)
#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
#  "debug-tweaks"   - make an image suitable for development
#                     e.g. ssh root access has a blank password
# There are other application targets that can be used here too, see
# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
# We default to enabling the debugging tweaks.
EXTRA_IMAGE_FEATURES ?= "debug-tweaks"

#
# Additional image features
#
# The following is a list of additional classes to use when building images which
# enable extra features. Some available options which can be included in this variable
# are:
#   - 'buildstats' collect build statistics
#   - 'image-mklibs' to reduce shared library files size for an image
#   - 'image-prelink' in order to prelink the filesystem image
# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
USER_CLASSES ?= "buildstats image-mklibs image-prelink"

#
# Runtime testing of images
#
# The build system can test booting virtual machine images under qemu (an emulator)
# after any root filesystems are created and run tests against those images. It can also
# run tests against any SDK that are built. To enable this uncomment these lines.
# See classes/test{image,sdk}.bbclass for further details.
#IMAGE_CLASSES += "testimage testsdk"
#TESTIMAGE_AUTO_qemuall = "1"

#
# Interactive shell configuration
#
# Under certain circumstances the system may need input from you and to do this it
# can launch an interactive shell. It needs to do this since the build is
# multithreaded and needs to be able to handle the case where more than one parallel
# process may require the user's attention. The default is iterate over the available
# terminal types to find one that works.
#
# Examples of the occasions this may happen are when resolving patches which cannot
# be applied, to use the devshell or the kernel menuconfig
#
# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
# Note: currently, Konsole support only works for KDE 3.x due to the way
# newer Konsole versions behave
#OE_TERMINAL = "auto"
# By default disable interactive patch resolution (tasks will just fail instead):
PATCHRESOLVE = "noop"

#
# Disk Space Monitoring during the build
#
# Monitor the disk space during the build. If there is less that 1GB of space or less
# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
# of the build. The reason for this is that running completely out of space can corrupt
# files and damages the build in ways which may not be easily recoverable.
# It's necesary to monitor /tmp, if there is no space left the build will fail
# with very exotic errors.
BB_DISKMON_DIRS ??= "\
    STOPTASKS,${TMPDIR},1G,100K \
    STOPTASKS,${DL_DIR},1G,100K \
    STOPTASKS,${SSTATE_DIR},1G,100K \
    STOPTASKS,/tmp,100M,100K \
    ABORT,${TMPDIR},100M,1K \
    ABORT,${DL_DIR},100M,1K \
    ABORT,${SSTATE_DIR},100M,1K \
    ABORT,/tmp,10M,1K"

#
# Shared-state files from other locations
#
# As mentioned above, shared state files are prebuilt cache data objects which can
# used to accelerate build time. This variable can be used to configure the system
# to search other mirror locations for these objects before it builds the data itself.
#
# This can be a filesystem directory, or a remote url such as http or ftp. These
# would contain the sstate-cache results from previous builds (possibly from other
# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
# cache locations to check for the shared objects.
# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
# at the end as shown in the examples below. This will be substituted with the
# correct path within the directory structure.
#SSTATE_MIRRORS ?= "\
#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
#file://.* file:///some/local/dir/sstate/PATH"

#
# Yocto Project SState Mirror
#
# The Yocto Project has prebuilt artefacts available for its releases, you can enable
# use of these by uncommenting the following line. This will mean the build uses
# the network to check for artefacts at the start of builds, which does slow it down
# equally, it will also speed up the builds by not having to build things if they are
# present in the cache. It assumes you can download something faster than you can build it
# which will depend on your network.
#
#SSTATE_MIRRORS ?= "file://.* http://sstate.yoctoproject.org/2.5/PATH;downloadfilename=PATH"

#
# Qemu configuration
#
# By default native qemu will build with a builtin VNC server where graphical output can be
# seen. The line below enables the SDL UI frontend too.
PACKAGECONFIG_append_pn-qemu-system-native = " sdl"
# By default libsdl2-native will be built, if you want to use your host's libSDL instead of
# the minimal libsdl built by libsdl2-native then uncomment the ASSUME_PROVIDED line below.
#ASSUME_PROVIDED += "libsdl2-native"

# You can also enable the Gtk UI frontend, which takes somewhat longer to build, but adds
# a handy set of menus for controlling the emulator.
#PACKAGECONFIG_append_pn-qemu-system-native = " gtk+"

#
# Hash Equivalence
#
# Enable support for automatically running a local hash equivalence server and
# instruct bitbake to use a hash equivalence aware signature generator. Hash
# equivalence improves reuse of sstate by detecting when a given sstate
# artifact can be reused as equivalent, even if the current task hash doesn't
# match the one that generated the artifact.
#
# A shared hash equivalent server can be set with "<HOSTNAME>:<PORT>" format
#
#BB_HASHSERVE = "auto"
#BB_SIGNATURE_HANDLER = "OEEquivHash"

# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
# track the version of this file when it was generated. This can safely be ignored if
# this doesn't mean anything to you.
CONF_VERSION = "1"

# Add systemd configuration
DISTRO_FEATURES_append = " systemd"
VIRTUAL-RUNTIME_init_manager = "systemd"

# add the static lib to SDK toolchain
SDKIMAGE_FEATURES_append = " staticdev-pkgs"

# Enable Gfx Pkgs
MACHINE_FEATURES_append = " gsx"
MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"

# for Wayland/Weston
DISTRO_FEATURES_NATIVESDK_append = " wayland"
DISTRO_FEATURES_append = " pam"
PREFERRED_PROVIDER_virtual/libgles1 = ""
PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
PREFERRED_PROVIDER_virtual/egl = "libegl"
PREFERRED_PROVIDER_virtual/libgl = ""
PREFERRED_PROVIDER_virtual/mesa = ""
PREFERRED_PROVIDER_virtual/libgbm = "libgbm"
PREFERRED_PROVIDER_libgbm-dev = "libgbm"
BBMASK = "mesa-gl"

# Enable Multimedia features
MACHINE_FEATURES_append = " multimedia"

# for gstreamer omx plugins
LICENSE_FLAGS_WHITELIST = "commercial"
# for mmp test program
DISTRO_FEATURES_append = " mm-test"

# for weston v4l2 renderer
#DISTRO_FEATURES_append = " v4l2-renderer"

# OMX H263 decoder library for Linux (RTM0AC0000XV263D30SL41C)
#DISTRO_FEATURES_append = " h263dec_lib"

# OMX H264 decoder library for Linux (RTM0AC0000XV264D30SL41C)
DISTRO_FEATURES_append = " h264dec_lib"

# OMX H264 encoder library for Linux (RTM0AC0000XV264E30SL41C)
#DISTRO_FEATURES_append = " h264enc_lib"

# OMX H265 decoder library for Linux (RTM0AC0000XV265D30SL41C)
#DISTRO_FEATURES_append = " h265dec_lib"

# OMX MPEG2 decoder library for Linux (RTM0AC0000XVM2VD30SL41C)
#DISTRO_FEATURES_append = " mpeg2dec_lib"

# OMX Media Component MPEG4 Decoder Library for Linux (RTM0AC0000XVM4VD30SL41C)
#DISTRO_FEATURES_append = " mpeg4dec_lib"

# OMX Media Component VC-1 Decoder Library for Linux (RTM0AC0000XVVC1D30SL41C)
#DISTRO_FEATURES_append = " vc1dec_lib"

# OMX Media Component DivXD Decoder Library for Linux (RTM0AC0000XVDVXD30SL41C)
#DISTRO_FEATURES_append = " divxdec_lib"

# OMX Media Component RealVideo Decoder Library for Linux (RTM0AC0000XVRLVD30SL41C)
#DISTRO_FEATURES_append = " rvdec_lib"

# OMX Media Component ALAC Decoder Library for Linux (RTM0AC0000XAALAD30SL41C)
#DISTRO_FEATURES_append = " alacdec_lib"

# OMX Media Component FLAC Decoder Library for Linux (RTM0AC0000XAFLAD30SL41C)
#DISTRO_FEATURES_append = " flacdec_lib"

# OMX AAC-LC decoder library for Linux (RTM0AC0000XAAACD30SL41C),
# AAC-LC 2ch decoder middleware library for Linux (RTM0AC0000ADAACMZ1SL41C)
DISTRO_FEATURES_append = " aaclcdec_lib"
DISTRO_FEATURES_append = " aaclcdec_mdw"

# OMX aacPlus V2 decoder library for Linux (RTM0AC0000XAAAPD30SL41C),
# aacPlus V2 decoder middleware library for Linux (RTM0AC0000ADAAPMZ1SL41C)
#DISTRO_FEATURES_append = " aacpv2dec_lib"
#DISTRO_FEATURES_append = " aacpv2dec_mdw"

# OMX MP3 decoder library for Linux (RTM0AC0000XAMP3D30SL41C),
# MP3 decoder middleware library for Linux (RTM0AC0000ADMP3MZ1SL41C)
#DISTRO_FEATURES_append = " mp3dec_lib"
#DISTRO_FEATURES_append = " mp3dec_mdw"

# OMX WMA decoder library for Linux (RTM0AC0000XAWMAD30SL41C),
# WMA decoder middleware library for Linux (RTM0AC0000ADWMAMZ1SL41C)
#DISTRO_FEATURES_append = " wmadec_lib"
#DISTRO_FEATURES_append = " wmadec_mdw"

# OMX AAC-LC encoder library for Linux (RTM0AC0000XAAACE30SL41C)
# AAC-LC encoder middleware library for Linux (RTM0AC0000AEAACMZ1SL41C)
#DISTRO_FEATURES_append = " aaclcenc_lib"
#DISTRO_FEATURES_append = " aaclcenc_mdw"

# OMX Dolby(R) Digital decoder library for Linux (RTM0AC0000XADD5D30SL41C),
# Dolby(R) Digital decoder middleware library for Linux (RTM0AC0000ADDD5MZ1SL41C)
#DISTRO_FEATURES_append = " dddec_lib"
#DISTRO_FEATURES_append = " dddec_mdw"

# OMX Media Component VP8 Decoder Library for Linux (RTM0AC0000XVVP8D30SL41C)
#DISTRO_FEATURES_append = " vp8dec_lib"

# OMX Media Component VP8 Encoder Library for Linux (RTM0AC0000XVVP8E30SL41C)
#DISTRO_FEATURES_append = " vp8enc_lib"

# CMS Basic Color Management Middleware for Linux (RTM0AC0000JRCMBCV0SL41C)
#DISTRO_FEATURES_append = " cmsbcm"

# CMS CMM3 Backlight Control Middleware for Linux (RTM0AC0000JRCMBLC0SL41C)
#DISTRO_FEATURES_append = " cmsblc"

# CMS VSP2 Dynamic Gamma Correction Middleware for Linux (RTM0AC0000JRCMDGV0SL41C)
#DISTRO_FEATURES_append = " cmsdgc"

# ISDB-T DTV Software Package for Linux (RTM0RC0000TE020000SL41C)
#DISTRO_FEATURES_append = " dtv"

# DVD Core-Middleware for Linux (RTM0RC0000XDVDC301SL41C)
# DVD Encryption Library for Linux (RTM0RC0000XDVDF301SL41C)
#DISTRO_FEATURES_append = " dvd"
#DISTRO_FEATURES_append = " dvd_encryption_library"

# ADSP Driver for Linux (RCG3AHPDL4101ZDO)
# ADSP Interface for Linux (RCG3AHIFL4101ZDP)
# ADSP Framework (RCG3AHFWN0201ZDP)
#DISTRO_FEATURES_append = " adsp"

# AVB Software Package for Linux
#DISTRO_FEATURES_append = " avb"

# Linux ICCOM driver (RCG3ZLIDL4101ZNO)
# Linux ICCOM library (RCG3ZLILL4101ZNO)
#DISTRO_FEATURES_append = " iccom"

# Evaluation packages
#DISTRO_FEATURES_append = " use_eva_pkg"

# Configuration for ivi-shell and ivi-extension
#DISTRO_FEATURES_append = " ivi-shell"

# Add Capacity Aware migration Strategy (CAS)
MACHINE_FEATURES_append = " cas"

# Remove ptest to reduce the build time
DISTRO_FEATURES_remove = "ptest"

# Reproducible Builds
# Set Timestamps at the build start
export SOURCE_DATE_EPOCH = "${@time.strftime('%s', time.localtime())}"
REPRODUCIBLE_TIMESTAMP_ROOTFS = "${@time.strftime('%s', time.localtime())}"