aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorYannick Gicquel <yannick.gicquel@iot.bzh>2016-10-12 15:11:52 +0200
committerYannick Gicquel <yannick.gicquel@iot.bzh>2016-10-12 15:11:52 +0200
commit56fecfd69aaac0188156196d1e4e89428e460c3e (patch)
treee2f0910514b87d1097559b5888696108f7313d86
parent54468ca688041d27af11d9109aeacac83f74dbe2 (diff)
gen2: add README for usbgadget
Change-Id: If629ee6edf7a24dd582f3c34a12dea76b84d7388 Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
-rw-r--r--meta-rcar-gen2/README-usbgadget.md57
1 files changed, 57 insertions, 0 deletions
diff --git a/meta-rcar-gen2/README-usbgadget.md b/meta-rcar-gen2/README-usbgadget.md
new file mode 100644
index 0000000..58299f7
--- /dev/null
+++ b/meta-rcar-gen2/README-usbgadget.md
@@ -0,0 +1,57 @@
+USB Gadget
+==========
+
+# Introduction
+
+This README describes a way the USB Gadget feature can be used on Renesas Porter boards.
+
+## Hardware setup
+
+To use the USB Gadget feature, you need an extra micro-USB cable.
+The proposed setup is based on the selection of USB OTG feature by configuring the jumper JP13 between 1-2 ("Host"). Then, you can plug the cable in CN22 connector ("USB Channel 0").
+
+## Software setup
+
+Be sure you have the "usbgadget" feature in the DISTRO_FEATURES bitbake environment variable.
+
+# Usage
+
+## Manual configuration
+
+Example to uses Ethernet over USB feature:
+
+ # modprobe g_ether
+ # ip a | grep -A 2 usb0
+ 5: usb0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000
+ link/ether 4e:bc:d4:ab:7e:e5 brd ff:ff:ff:ff:ff:ff
+ # ip address add 192.168.0.10 dev usb0
+
+Now, from your host computer you can check connectivity:
+
+ $ ping 192.168.0.10
+ PING 192.168.0.10 (192.168.0.10) 56(84) bytes of data.
+ 64 bytes from 192.168.0.10: icmp_seq=1 ttl=64 time=0.370 ms
+ 64 bytes from 192.168.0.10: icmp_seq=2 ttl=64 time=0.406 ms
+ ...
+
+## Persistent configuration
+
+We can load the module at startup, by creating a file `/etc/modules-load.d/g_ether.conf`.
+
+The file content should be as below:
+
+ # Load g_ether at boot
+ g_ether
+
+Connman can handle the Ethernet over USB link. First, we create the directory which
+contain the configuration file:
+
+ # mkdir /etc/connman
+
+Then we can edit a `/etc/connman/main.conf` file:
+
+ [General]
+ PreferredTechnologies=ethernet,wifi,cellular
+ PersistentTetheringMode=true
+ TetheringTechnologies=gadget
+