meta-rcar-gen2: remove configuration templatesblowflish_2.0.2blowfish_2.0.1blowfish_2.0.02.0.22.0.12.0.0agl-1.0-bsp-1.8.0

Change-Id: Iab939af4ee570732d4a2dd2b20ab6dc0dea6c86b
Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh>

1 files changed, 0 insertions, 433 deletions

diff --git a/meta-rcar-gen2/conf/local.conf.sample b/meta-rcar-gen2/conf/local.conf.sample
deleted file mode 100644
index ae9266a..0000000
--- a/meta-rcar-gen2/conf/local.conf.sample
+++ /dev/null
@@ -1,433 +0,0 @@
-DISTRO = "poky-agl"
-MACHINE = "porter"
-
-# Commnet out below if want to use QtWebkit
-PACKAGECONFIG_remove_pn-qtquick1 = "webkit"
-
-# For running GStreamer on wayland (experimental).
-#
-# Uncoment below if want to use multimedia acceleration on wayland
-#
-#IMAGE_INSTALL_append_porter = " \
-#    gstreamer1.0-plugins-bad-waylandsink \
-#    "
-
-# Additional plugins to test multimedia acceleration (experimental)
-#
-# Uncoment below if want to use multimedia acceleration
-#
-#IMAGE_INSTALL_append_porter = " \
-#    gstreamer1.0-plugins-base-videorate \
-#    gstreamer1.0-plugins-base-videotestsrc \
-#    gstreamer1.0-plugins-base-audiotestsrc \
-#    gstreamer1.0-plugins-base-alsa \
-#    gstreamer1.0-plugins-good-autodetect \
-#    gstreamer1.0-plugins-good-isomp4 \
-#    gstreamer1.0-plugins-good-video4linux2 \
-#    gstreamer1.0-plugins-good-videocrop \
-#    gstreamer1.0-plugins-bad-asfmux \
-#    gstreamer1.0-plugins-bad-fbdevsink \
-#    gstreamer1.0-plugins-bad-faad \
-#    gstreamer1.0-plugins-bad-videoparsersbad \
-#"
-# for graphics acceleration
-#
-# Uncoment below if want to use multimedia acceleration
-#
-#IMAGE_INSTALL_append_porter = " \
-#    libegl libegl-dev libgbm-dev \
-#    gles-kernel-module gles-user-module \
-#    libdrm-tests \
-#    libdrm-kms \
-#    "
-
-# for multimedia acceleration
-#
-# Uncoment below if want to use multimedia acceleration
-#
-#IMAGE_INSTALL_append_porter = " \
-#    packagegroup-rcar-gen2-multimedia \
-#    packagegroup-lcb-oss-codecs \
-#    alsa-utils alsa-utils-config alsa-tools \
-#"
-
-# For Bluetooth hardware support
-BT_KERNEL_MODULES = " \
-    kernel-module-btusb \
-    kernel-module-bnep \
-    kernel-module-rfcomm \
-    kernel-module-rfkill \
-    "
-
-# Distribution-specific runtime components
-IMAGE_INSTALL_append = " \
-    ${@bb.utils.contains("DISTRO_FEATURES", "bluetooth", "${BT_KERNEL_MODULES}", "", d)} \
-    "
-
-# TODO: When booting weston, someone try to load 'libgbm_kms.so' then
-# fail to boot. It should be 'libgbm_kms.so.1'.
-# Tentatively, it is to install 'libgbm-dev' pkg.
-#IMAGE_INSTALL_append = "libgbm-dev"
-# this is not recommended and should be done in the recipe requiring this module (gles-user-module)
-
-LICENSE_FLAGS_WHITELIST = "commercial"
-
-# Define the name of multimedia, dtv, graphic test, multimedia-test for bbmask
-BB_MULTIMEDIA_KERNEL_MODULE = "fdpm-kernel-module|mmngr-kernel-module|\
-                               mmngrbuf-kernel-module|s3ctl-kernel-module|\
-                               uvcs-kernel-module|vspm-kernel-module"
-BB_MULTIMEDIA_USER_MODULE = "fdpm-user-module|mmngr-user-module|\
-                             mmngrbuf-user-module|omx-user-module|\
-                             s3ctl-user-module|vspm-user-module|libmemcpy"
-BB_MULTIMEDIA_TEST_MODULE = "fdpm-tp-user-module|mmngr-tp-user-module|\
-                             mmngrbuf-tp-user-module|s3ctl-tp-user-module|\
-                             vspm-tp-user-module"
-BB_GST_PLUGINS = "meta-renesas/meta-rcar-gen2/recipes-multimedia/gstreamer"
-MULTIMEDIA_BB = "${BB_MULTIMEDIA_KERNEL_MODULE}|${BB_MULTIMEDIA_USER_MODULE}|\
-                 ${BB_MULTIMEDIA_TEST_MODULE}|${BB_GST_PLUGINS}"
-
-# Enable Multimedia standard pkg
-#MACHINE_FEATURES_append = " multimedia"
-
-# UnMask the multimedia kernel modules
-#BBMASK .= "|${BB_MULTIMEDIA_KERNEL_MODULE}"
-
-# UnMask the multimedia user modules
-#BBMASK .= "|${BB_MULTIMEDIA_USER_MODULE}"
-
-# Include static library in SDK
-SDKIMAGE_FEATURES_append = " staticdev-pkgs"
-
-# Mask the DTV pkgs
-#MACHINE_FEATURES_append = " dtv"
-BBMASK = "dtv-module|ssp-module|scu-module"
-
-# Enable graphic pkgs
-#BBMASK .= "|gles-kernel-module|gles-user-module"
-
-# Mask the multimedia-test
-BBMASK .= "|${BB_MULTIMEDIA_TEST_MODULE}"
-
-# Mask the graphic test
-BBMASK .= "|gles-test-module"
-
-#DISTRO_FEATURES_append = " mm-test"
-#DISTRO_FEATURES_append = " gles-test"
-
-# Enable Gfx Pkgs
-MACHINE_FEATURES_append = " sgx"
-MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2"
-
-# for Wayland/Weston
-
-PREFERRED_PROVIDER_virtual/libgles1 = ""
-PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module"
-PREFERRED_PROVIDER_virtual/egl = "libegl"
-PREFERRED_PROVIDER_virtual/libgl = ""
-PREFERRED_PROVIDER_virtual/mesa = ""
-PREFERRED_PROVIDER_libgbm = "libgbm"
-PREFERRED_PROVIDER_libgbm-dev = "libgbm"
-
-# Setting for u-boot Wayland
-UBOOT_MACHINE = "porter_vin_config"
-
-# Addtional Configurations of Optional OMX modules
-
-# OMX Media Component H263 Decoder Library
-#DISTRO_FEATURES_append = " h263dec_lib"
-# OMX Media Component VC-1 Decoder Library
-#DISTRO_FEATURES_append = " vc1dec_lib"
-# OMX Media Component MPEG-4 Decoder Library
-#DISTRO_FEATURES_append = " mpeg4dec_lib"
-# VCP3 Driver Adapted for Linux MPEG-2 Decoder Library
-#DISTRO_FEATURES_append = " mpeg2dec_lib"
-# DivX Decoder Library for Linux
-#DISTRO_FEATURES_append = " divxdec_lib"
-# Encoder Library for Linux
-DISTRO_FEATURES_append = " h264avcenc_lib"
-
-# Configurations of Optional Audio Decoders
-# ARM 5.1ch aacPlus V2 Decoder for Linux
-#DISTRO_FEATURES_append = " aacp2dec_lib"
-# ARM MP3 Decoder for Linux
-#DISTRO_FEATURES_append = " mp3dec_lib"
-# ARM WMA Decoder for Linux
-#DISTRO_FEATURES_append = " wmadec_lib"
-# ARM 5.1ch Dolby Digital Decoder for Linux
-#DISTRO_FEATURES_append = " ddddec_lib"
-# ARM ALAC Decoder for Linux
-#DISTRO_FEATURES_append = " alacdec_lib"
-# ARM FLAC Decoder for Linux
-#DISTRO_FEATURES_append = " flacdec_lib"
-# ARM AAC-LC Decoder Library Sample for Linux
-#DISTRO_FEATURES_append = " aaclcsdec_lib"
-# ARM AAC Encoder for Linux
-#DISTRO_FEATURES_append = " aacenc_lib"
-
-# Configurations of Optional Audio Middlewares
-# ARM 5.1ch aacPlus V2 Decode Middleware for Linux
-#DISTRO_FEATURES_append = " armaccp2dec_mdw"
-# ARM MP3 Decode Middleware for Linux
-#DISTRO_FEATURES_append = " mp3dec_mdw"
-# ARM WMA Decode Middleware for Linux
-#DISTRO_FEATURES_append = " wmadec_mdw"
-# ARM 5.1ch Dolby Digital Decode Middleware for Linux
-#DISTRO_FEATURES_append = " ddddec_mdw"
-# ARM ALAC Decode Middleware for Linux
-#DISTRO_FEATURES_append = " alacdec_mdw"
-# ARM FLAC Decode Middleware for Linux
-#DISTRO_FEATURES_append = " flacdec_mdw"
-# ARM AAC Decode Middleware Sample for Linux
-#DISTRO_FEATURES_append = " aacsdec_mdw"
-# ARM AAC Encode Middleware for Linux
-#DISTRO_FEATURES_append = " aacenc_mdw"
-
-#
-# This file is your local configuration file and is where all local user settings
-# are placed. The comments in this file give some guide to the options a new user
-# to the system might want to change but pretty much any configuration option can
-# be set in this file. More adventurous users can look at local.conf.extended
-# which contains other examples of configuration which can be placed in this file
-# but new users likely won't need any of them initially.
-#
-# Lines starting with the '#' character are commented out and in some cases the
-# default values are provided as comments to show people example syntax. Enabling
-# the option is a question of removing the # character and making any change to the
-# variable as required.
-
-#
-# Machine Selection
-#
-# You need to select a specific machine to target the build with. There are a selection
-# of emulated machines available which can boot and run in the QEMU emulator:
-#
-#MACHINE ?= "qemuarm"
-#MACHINE ?= "qemumips"
-#MACHINE ?= "qemuppc"
-#MACHINE ?= "qemux86"
-#MACHINE ?= "qemux86-64"
-#
-# There are also the following hardware board target machines included for
-# demonstration purposes:
-#
-#MACHINE ?= "beaglebone"
-#MACHINE ?= "genericx86"
-#MACHINE ?= "genericx86-64"
-#MACHINE ?= "mpc8315e-rdb"
-#MACHINE ?= "edgerouter"
-#
-# This sets the default machine to be qemux86 if no other machine is selected:
-MACHINE ??= "qemux86-64"
-
-#
-# Where to place downloads
-#
-# During a first build the system will download many different source code tarballs
-# from various upstream projects. This can take a while, particularly if your network
-# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you
-# can preserve this directory to speed up this part of subsequent builds. This directory
-# is safe to share between multiple builds on the same machine too.
-#
-# The default is a downloads directory under TOPDIR which is the build directory.
-#
-#DL_DIR ?= "${TOPDIR}/downloads"
-
-#
-# Where to place shared-state files
-#
-# BitBake has the capability to accelerate builds based on previously built output.
-# This is done using "shared state" files which can be thought of as cache objects
-# and this option determines where those files are placed.
-#
-# You can wipe out TMPDIR leaving this directory intact and the build would regenerate
-# from these files if no changes were made to the configuration. If changes were made
-# to the configuration, only shared state files where the state was still valid would
-# be used (done using checksums).
-#
-# The default is a sstate-cache directory under TOPDIR.
-#
-#SSTATE_DIR ?= "${TOPDIR}/sstate-cache"
-
-#
-# Where to place the build output
-#
-# This option specifies where the bulk of the building work should be done and
-# where BitBake should place its temporary files and output. Keep in mind that
-# this includes the extraction and compilation of many applications and the toolchain
-# which can use Gigabytes of hard disk space.
-#
-# The default is a tmp directory under TOPDIR.
-#
-#TMPDIR = "${TOPDIR}/tmp"
-
-#
-# Default policy config
-#
-# The distribution setting controls which policy settings are used as defaults.
-# The default value is fine for general Yocto project use, at least initially.
-# Ultimately when creating custom policy, people will likely end up subclassing
-# these defaults.
-#
-DISTRO ?= "poky"
-# As an example of a subclass there is a "bleeding" edge policy configuration
-# where many versions are set to the absolute latest code from the upstream
-# source control systems. This is just mentioned here as an example, its not
-# useful to most new users.
-# DISTRO ?= "poky-bleeding"
-
-#
-# Package Management configuration
-#
-# This variable lists which packaging formats to enable. Multiple package backends
-# can be enabled at once and the first item listed in the variable will be used
-# to generate the root filesystems.
-# Options are:
-#  - 'package_deb' for debian style deb files
-#  - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager)
-#  - 'package_rpm' for rpm style packages
-# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk"
-# We default to rpm:
-PACKAGE_CLASSES ?= "package_rpm"
-
-#
-# SDK/ADT target architecture
-#
-# This variable specifies the architecture to build SDK/ADT items for and means
-# you can build the SDK packages for architectures other than the machine you are
-# running the build on (i.e. building i686 packages on an x86_64 host).
-# Supported values are i686 and x86_64
-#SDKMACHINE ?= "i686"
-
-#
-# Extra image configuration defaults
-#
-# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated
-# images. Some of these options are added to certain image types automatically. The
-# variable can contain the following options:
-#  "dbg-pkgs"       - add -dbg packages for all installed packages
-#                     (adds symbol information for debugging/profiling)
-#  "dev-pkgs"       - add -dev packages for all installed packages
-#                     (useful if you want to develop against libs in the image)
-#  "ptest-pkgs"     - add -ptest packages for all ptest-enabled packages
-#                     (useful if you want to run the package test suites)
-#  "tools-sdk"      - add development tools (gcc, make, pkgconfig etc.)
-#  "tools-debug"    - add debugging tools (gdb, strace)
-#  "eclipse-debug"  - add Eclipse remote debugging support
-#  "tools-profile"  - add profiling tools (oprofile, exmap, lttng, valgrind)
-#  "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.)
-#  "debug-tweaks"   - make an image suitable for development
-#                     e.g. ssh root access has a blank password
-# There are other application targets that can be used here too, see
-# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details.
-# We default to enabling the debugging tweaks.
-EXTRA_IMAGE_FEATURES = "debug-tweaks"
-
-#
-# Additional image features
-#
-# The following is a list of additional classes to use when building images which
-# enable extra features. Some available options which can be included in this variable
-# are:
-#   - 'buildstats' collect build statistics
-#   - 'image-mklibs' to reduce shared library files size for an image
-#   - 'image-prelink' in order to prelink the filesystem image
-#   - 'image-swab' to perform host system intrusion detection
-# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink
-# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended
-USER_CLASSES ?= "buildstats image-mklibs image-prelink"
-
-#
-# Runtime testing of images
-#
-# The build system can test booting virtual machine images under qemu (an emulator)
-# after any root filesystems are created and run tests against those images. To
-# enable this uncomment this line. See classes/testimage(-auto).bbclass for
-# further details.
-#TEST_IMAGE = "1"
-#
-# Interactive shell configuration
-#
-# Under certain circumstances the system may need input from you and to do this it
-# can launch an interactive shell. It needs to do this since the build is
-# multithreaded and needs to be able to handle the case where more than one parallel
-# process may require the user's attention. The default is iterate over the available
-# terminal types to find one that works.
-#
-# Examples of the occasions this may happen are when resolving patches which cannot
-# be applied, to use the devshell or the kernel menuconfig
-#
-# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none
-# Note: currently, Konsole support only works for KDE 3.x due to the way
-# newer Konsole versions behave
-#OE_TERMINAL = "auto"
-# By default disable interactive patch resolution (tasks will just fail instead):
-PATCHRESOLVE = "noop"
-
-#
-# Disk Space Monitoring during the build
-#
-# Monitor the disk space during the build. If there is less that 1GB of space or less
-# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully
-# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort
-# of the build. The reason for this is that running completely out of space can corrupt
-# files and damages the build in ways which may not be easily recoverable.
-BB_DISKMON_DIRS = "\
-    STOPTASKS,${TMPDIR},1G,100K \
-    STOPTASKS,${DL_DIR},1G,100K \
-    STOPTASKS,${SSTATE_DIR},1G,100K \
-    ABORT,${TMPDIR},100M,1K \
-    ABORT,${DL_DIR},100M,1K \
-    ABORT,${SSTATE_DIR},100M,1K"
-
-#
-# Shared-state files from other locations
-#
-# As mentioned above, shared state files are prebuilt cache data objects which can
-# used to accelerate build time. This variable can be used to configure the system
-# to search other mirror locations for these objects before it builds the data itself.
-#
-# This can be a filesystem directory, or a remote url such as http or ftp. These
-# would contain the sstate-cache results from previous builds (possibly from other
-# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the
-# cache locations to check for the shared objects.
-# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH
-# at the end as shown in the examples below. This will be substituted with the
-# correct path within the directory structure.
-#SSTATE_MIRRORS ?= "\
-#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \
-#file://.* file:///some/local/dir/sstate/PATH"
-
-
-#
-# Qemu configuration
-#
-# By default qemu will build with a builtin VNC server where graphical output can be
-# seen. The two lines below enable the SDL backend too. This assumes there is a
-# libsdl library available on your build system.
-PACKAGECONFIG_append_pn-qemu-native = " sdl"
-PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl"
-ASSUME_PROVIDED += "libsdl-native"
-
-###############
-#
-# AGL specifics
-#
-###############
-
-# AGL includes all kernel modules here for ease-of-use during development.
-# Comment this out to be able to select the kernel modules yourself.
-IMAGE_INSTALL_append = " kernel-modules"
-
-# Likewise as we included all kernel modules by default in the filesystem,
-# we do not need a separate tarball stored.
-# Comment this out to receive the separate modules tarbal again.
-MODULE_TARBALL_DEPLOY ?= "0"
-
-###############
-# /END AGL
-###############
-
-# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to
-# track the version of this file when it was generated. This can safely be ignored if
-# this doesn't mean anything to you.
-CONF_VERSION = "1"