diff options
Diffstat (limited to 'meta-rcar-gen2')
| -rw-r--r-- | meta-rcar-gen2/conf/bblayers.conf.sample | 34 | ||||
| -rw-r--r-- | meta-rcar-gen2/conf/local.conf.sample | 433 |
2 files changed, 0 insertions, 467 deletions
diff --git a/meta-rcar-gen2/conf/bblayers.conf.sample b/meta-rcar-gen2/conf/bblayers.conf.sample deleted file mode 100644 index 845d8cd..0000000 --- a/meta-rcar-gen2/conf/bblayers.conf.sample +++ /dev/null @@ -1,34 +0,0 @@ -# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf -# changes incompatibly -LCONF_VERSION = "6" - -BBPATH = "${TOPDIR}" -BBFILES ?= "" - -BBLAYERS ?= " \ - ##OEROOT##/meta \ - ##OEROOT##/meta-yocto \ - ##OEROOT##/meta-yocto-bsp \ - ##OEROOT##/../meta-agl/meta-ivi-common \ - ##OEROOT##/../meta-agl/meta-agl \ - ##OEROOT##/../meta-agl/meta-netboot \ - ##OEROOT##/../meta-openembedded/meta-oe \ - ##OEROOT##/../meta-openembedded/meta-multimedia \ - ##OEROOT##/../meta-openembedded/meta-ruby \ - ##OEROOT##/../meta-openembedded/meta-efl \ - ##OEROOT##/../meta-openembedded/meta-networking \ - ##OEROOT##/../meta-openembedded/meta-python \ - ##OEROOT##/../meta-renesas \ - ##OEROOT##/../meta-renesas/meta-rcar-gen2 \ - ##OEROOT##/../meta-openembedded/meta-networking \ - ##OEROOT##/../meta-openembedded/meta-python \ - ##OEROOT##/../meta-openembedded/meta-filesystems \ - ##OEROOT##/../meta-agl-demo \ - ##OEROOT##/../meta-qt5 \ - ##OEROOT##/../meta-rust \ - " -BBLAYERS_NON_REMOVABLE ?= " \ - ##OEROOT##/meta \ - ##OEROOT##/meta-yocto \ - ##OEROOT##/../meta-agl/meta-agl \ - " diff --git a/meta-rcar-gen2/conf/local.conf.sample b/meta-rcar-gen2/conf/local.conf.sample deleted file mode 100644 index ae9266a..0000000 --- a/meta-rcar-gen2/conf/local.conf.sample +++ /dev/null @@ -1,433 +0,0 @@ -DISTRO = "poky-agl" -MACHINE = "porter" - -# Commnet out below if want to use QtWebkit -PACKAGECONFIG_remove_pn-qtquick1 = "webkit" - -# For running GStreamer on wayland (experimental). -# -# Uncoment below if want to use multimedia acceleration on wayland -# -#IMAGE_INSTALL_append_porter = " \ -# gstreamer1.0-plugins-bad-waylandsink \ -# " - -# Additional plugins to test multimedia acceleration (experimental) -# -# Uncoment below if want to use multimedia acceleration -# -#IMAGE_INSTALL_append_porter = " \ -# gstreamer1.0-plugins-base-videorate \ -# gstreamer1.0-plugins-base-videotestsrc \ -# gstreamer1.0-plugins-base-audiotestsrc \ -# gstreamer1.0-plugins-base-alsa \ -# gstreamer1.0-plugins-good-autodetect \ -# gstreamer1.0-plugins-good-isomp4 \ -# gstreamer1.0-plugins-good-video4linux2 \ -# gstreamer1.0-plugins-good-videocrop \ -# gstreamer1.0-plugins-bad-asfmux \ -# gstreamer1.0-plugins-bad-fbdevsink \ -# gstreamer1.0-plugins-bad-faad \ -# gstreamer1.0-plugins-bad-videoparsersbad \ -#" -# for graphics acceleration -# -# Uncoment below if want to use multimedia acceleration -# -#IMAGE_INSTALL_append_porter = " \ -# libegl libegl-dev libgbm-dev \ -# gles-kernel-module gles-user-module \ -# libdrm-tests \ -# libdrm-kms \ -# " - -# for multimedia acceleration -# -# Uncoment below if want to use multimedia acceleration -# -#IMAGE_INSTALL_append_porter = " \ -# packagegroup-rcar-gen2-multimedia \ -# packagegroup-lcb-oss-codecs \ -# alsa-utils alsa-utils-config alsa-tools \ -#" - -# For Bluetooth hardware support -BT_KERNEL_MODULES = " \ - kernel-module-btusb \ - kernel-module-bnep \ - kernel-module-rfcomm \ - kernel-module-rfkill \ - " - -# Distribution-specific runtime components -IMAGE_INSTALL_append = " \ - ${@bb.utils.contains("DISTRO_FEATURES", "bluetooth", "${BT_KERNEL_MODULES}", "", d)} \ - " - -# TODO: When booting weston, someone try to load 'libgbm_kms.so' then -# fail to boot. It should be 'libgbm_kms.so.1'. -# Tentatively, it is to install 'libgbm-dev' pkg. -#IMAGE_INSTALL_append = "libgbm-dev" -# this is not recommended and should be done in the recipe requiring this module (gles-user-module) - -LICENSE_FLAGS_WHITELIST = "commercial" - -# Define the name of multimedia, dtv, graphic test, multimedia-test for bbmask -BB_MULTIMEDIA_KERNEL_MODULE = "fdpm-kernel-module|mmngr-kernel-module|\ - mmngrbuf-kernel-module|s3ctl-kernel-module|\ - uvcs-kernel-module|vspm-kernel-module" -BB_MULTIMEDIA_USER_MODULE = "fdpm-user-module|mmngr-user-module|\ - mmngrbuf-user-module|omx-user-module|\ - s3ctl-user-module|vspm-user-module|libmemcpy" -BB_MULTIMEDIA_TEST_MODULE = "fdpm-tp-user-module|mmngr-tp-user-module|\ - mmngrbuf-tp-user-module|s3ctl-tp-user-module|\ - vspm-tp-user-module" -BB_GST_PLUGINS = "meta-renesas/meta-rcar-gen2/recipes-multimedia/gstreamer" -MULTIMEDIA_BB = "${BB_MULTIMEDIA_KERNEL_MODULE}|${BB_MULTIMEDIA_USER_MODULE}|\ - ${BB_MULTIMEDIA_TEST_MODULE}|${BB_GST_PLUGINS}" - -# Enable Multimedia standard pkg -#MACHINE_FEATURES_append = " multimedia" - -# UnMask the multimedia kernel modules -#BBMASK .= "|${BB_MULTIMEDIA_KERNEL_MODULE}" - -# UnMask the multimedia user modules -#BBMASK .= "|${BB_MULTIMEDIA_USER_MODULE}" - -# Include static library in SDK -SDKIMAGE_FEATURES_append = " staticdev-pkgs" - -# Mask the DTV pkgs -#MACHINE_FEATURES_append = " dtv" -BBMASK = "dtv-module|ssp-module|scu-module" - -# Enable graphic pkgs -#BBMASK .= "|gles-kernel-module|gles-user-module" - -# Mask the multimedia-test -BBMASK .= "|${BB_MULTIMEDIA_TEST_MODULE}" - -# Mask the graphic test -BBMASK .= "|gles-test-module" - -#DISTRO_FEATURES_append = " mm-test" -#DISTRO_FEATURES_append = " gles-test" - -# Enable Gfx Pkgs -MACHINE_FEATURES_append = " sgx" -MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" - -# for Wayland/Weston - -PREFERRED_PROVIDER_virtual/libgles1 = "" -PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" -PREFERRED_PROVIDER_virtual/egl = "libegl" -PREFERRED_PROVIDER_virtual/libgl = "" -PREFERRED_PROVIDER_virtual/mesa = "" -PREFERRED_PROVIDER_libgbm = "libgbm" -PREFERRED_PROVIDER_libgbm-dev = "libgbm" - -# Setting for u-boot Wayland -UBOOT_MACHINE = "porter_vin_config" - -# Addtional Configurations of Optional OMX modules - -# OMX Media Component H263 Decoder Library -#DISTRO_FEATURES_append = " h263dec_lib" -# OMX Media Component VC-1 Decoder Library -#DISTRO_FEATURES_append = " vc1dec_lib" -# OMX Media Component MPEG-4 Decoder Library -#DISTRO_FEATURES_append = " mpeg4dec_lib" -# VCP3 Driver Adapted for Linux MPEG-2 Decoder Library -#DISTRO_FEATURES_append = " mpeg2dec_lib" -# DivX Decoder Library for Linux -#DISTRO_FEATURES_append = " divxdec_lib" -# Encoder Library for Linux -DISTRO_FEATURES_append = " h264avcenc_lib" - -# Configurations of Optional Audio Decoders -# ARM 5.1ch aacPlus V2 Decoder for Linux -#DISTRO_FEATURES_append = " aacp2dec_lib" -# ARM MP3 Decoder for Linux -#DISTRO_FEATURES_append = " mp3dec_lib" -# ARM WMA Decoder for Linux -#DISTRO_FEATURES_append = " wmadec_lib" -# ARM 5.1ch Dolby Digital Decoder for Linux -#DISTRO_FEATURES_append = " ddddec_lib" -# ARM ALAC Decoder for Linux -#DISTRO_FEATURES_append = " alacdec_lib" -# ARM FLAC Decoder for Linux -#DISTRO_FEATURES_append = " flacdec_lib" -# ARM AAC-LC Decoder Library Sample for Linux -#DISTRO_FEATURES_append = " aaclcsdec_lib" -# ARM AAC Encoder for Linux -#DISTRO_FEATURES_append = " aacenc_lib" - -# Configurations of Optional Audio Middlewares -# ARM 5.1ch aacPlus V2 Decode Middleware for Linux -#DISTRO_FEATURES_append = " armaccp2dec_mdw" -# ARM MP3 Decode Middleware for Linux -#DISTRO_FEATURES_append = " mp3dec_mdw" -# ARM WMA Decode Middleware for Linux -#DISTRO_FEATURES_append = " wmadec_mdw" -# ARM 5.1ch Dolby Digital Decode Middleware for Linux -#DISTRO_FEATURES_append = " ddddec_mdw" -# ARM ALAC Decode Middleware for Linux -#DISTRO_FEATURES_append = " alacdec_mdw" -# ARM FLAC Decode Middleware for Linux -#DISTRO_FEATURES_append = " flacdec_mdw" -# ARM AAC Decode Middleware Sample for Linux -#DISTRO_FEATURES_append = " aacsdec_mdw" -# ARM AAC Encode Middleware for Linux -#DISTRO_FEATURES_append = " aacenc_mdw" - -# -# This file is your local configuration file and is where all local user settings -# are placed. The comments in this file give some guide to the options a new user -# to the system might want to change but pretty much any configuration option can -# be set in this file. More adventurous users can look at local.conf.extended -# which contains other examples of configuration which can be placed in this file -# but new users likely won't need any of them initially. -# -# Lines starting with the '#' character are commented out and in some cases the -# default values are provided as comments to show people example syntax. Enabling -# the option is a question of removing the # character and making any change to the -# variable as required. - -# -# Machine Selection -# -# You need to select a specific machine to target the build with. There are a selection -# of emulated machines available which can boot and run in the QEMU emulator: -# -#MACHINE ?= "qemuarm" -#MACHINE ?= "qemumips" -#MACHINE ?= "qemuppc" -#MACHINE ?= "qemux86" -#MACHINE ?= "qemux86-64" -# -# There are also the following hardware board target machines included for -# demonstration purposes: -# -#MACHINE ?= "beaglebone" -#MACHINE ?= "genericx86" -#MACHINE ?= "genericx86-64" -#MACHINE ?= "mpc8315e-rdb" -#MACHINE ?= "edgerouter" -# -# This sets the default machine to be qemux86 if no other machine is selected: -MACHINE ??= "qemux86-64" - -# -# Where to place downloads -# -# During a first build the system will download many different source code tarballs -# from various upstream projects. This can take a while, particularly if your network -# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you -# can preserve this directory to speed up this part of subsequent builds. This directory -# is safe to share between multiple builds on the same machine too. -# -# The default is a downloads directory under TOPDIR which is the build directory. -# -#DL_DIR ?= "${TOPDIR}/downloads" - -# -# Where to place shared-state files -# -# BitBake has the capability to accelerate builds based on previously built output. -# This is done using "shared state" files which can be thought of as cache objects -# and this option determines where those files are placed. -# -# You can wipe out TMPDIR leaving this directory intact and the build would regenerate -# from these files if no changes were made to the configuration. If changes were made -# to the configuration, only shared state files where the state was still valid would -# be used (done using checksums). -# -# The default is a sstate-cache directory under TOPDIR. -# -#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" - -# -# Where to place the build output -# -# This option specifies where the bulk of the building work should be done and -# where BitBake should place its temporary files and output. Keep in mind that -# this includes the extraction and compilation of many applications and the toolchain -# which can use Gigabytes of hard disk space. -# -# The default is a tmp directory under TOPDIR. -# -#TMPDIR = "${TOPDIR}/tmp" - -# -# Default policy config -# -# The distribution setting controls which policy settings are used as defaults. -# The default value is fine for general Yocto project use, at least initially. -# Ultimately when creating custom policy, people will likely end up subclassing -# these defaults. -# -DISTRO ?= "poky" -# As an example of a subclass there is a "bleeding" edge policy configuration -# where many versions are set to the absolute latest code from the upstream -# source control systems. This is just mentioned here as an example, its not -# useful to most new users. -# DISTRO ?= "poky-bleeding" - -# -# Package Management configuration -# -# This variable lists which packaging formats to enable. Multiple package backends -# can be enabled at once and the first item listed in the variable will be used -# to generate the root filesystems. -# Options are: -# - 'package_deb' for debian style deb files -# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) -# - 'package_rpm' for rpm style packages -# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" -# We default to rpm: -PACKAGE_CLASSES ?= "package_rpm" - -# -# SDK/ADT target architecture -# -# This variable specifies the architecture to build SDK/ADT items for and means -# you can build the SDK packages for architectures other than the machine you are -# running the build on (i.e. building i686 packages on an x86_64 host). -# Supported values are i686 and x86_64 -#SDKMACHINE ?= "i686" - -# -# Extra image configuration defaults -# -# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated -# images. Some of these options are added to certain image types automatically. The -# variable can contain the following options: -# "dbg-pkgs" - add -dbg packages for all installed packages -# (adds symbol information for debugging/profiling) -# "dev-pkgs" - add -dev packages for all installed packages -# (useful if you want to develop against libs in the image) -# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages -# (useful if you want to run the package test suites) -# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) -# "tools-debug" - add debugging tools (gdb, strace) -# "eclipse-debug" - add Eclipse remote debugging support -# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) -# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) -# "debug-tweaks" - make an image suitable for development -# e.g. ssh root access has a blank password -# There are other application targets that can be used here too, see -# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. -# We default to enabling the debugging tweaks. -EXTRA_IMAGE_FEATURES = "debug-tweaks" - -# -# Additional image features -# -# The following is a list of additional classes to use when building images which -# enable extra features. Some available options which can be included in this variable -# are: -# - 'buildstats' collect build statistics -# - 'image-mklibs' to reduce shared library files size for an image -# - 'image-prelink' in order to prelink the filesystem image -# - 'image-swab' to perform host system intrusion detection -# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink -# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended -USER_CLASSES ?= "buildstats image-mklibs image-prelink" - -# -# Runtime testing of images -# -# The build system can test booting virtual machine images under qemu (an emulator) -# after any root filesystems are created and run tests against those images. To -# enable this uncomment this line. See classes/testimage(-auto).bbclass for -# further details. -#TEST_IMAGE = "1" -# -# Interactive shell configuration -# -# Under certain circumstances the system may need input from you and to do this it -# can launch an interactive shell. It needs to do this since the build is -# multithreaded and needs to be able to handle the case where more than one parallel -# process may require the user's attention. The default is iterate over the available -# terminal types to find one that works. -# -# Examples of the occasions this may happen are when resolving patches which cannot -# be applied, to use the devshell or the kernel menuconfig -# -# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none -# Note: currently, Konsole support only works for KDE 3.x due to the way -# newer Konsole versions behave -#OE_TERMINAL = "auto" -# By default disable interactive patch resolution (tasks will just fail instead): -PATCHRESOLVE = "noop" - -# -# Disk Space Monitoring during the build -# -# Monitor the disk space during the build. If there is less that 1GB of space or less -# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully -# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort -# of the build. The reason for this is that running completely out of space can corrupt -# files and damages the build in ways which may not be easily recoverable. -BB_DISKMON_DIRS = "\ - STOPTASKS,${TMPDIR},1G,100K \ - STOPTASKS,${DL_DIR},1G,100K \ - STOPTASKS,${SSTATE_DIR},1G,100K \ - ABORT,${TMPDIR},100M,1K \ - ABORT,${DL_DIR},100M,1K \ - ABORT,${SSTATE_DIR},100M,1K" - -# -# Shared-state files from other locations -# -# As mentioned above, shared state files are prebuilt cache data objects which can -# used to accelerate build time. This variable can be used to configure the system -# to search other mirror locations for these objects before it builds the data itself. -# -# This can be a filesystem directory, or a remote url such as http or ftp. These -# would contain the sstate-cache results from previous builds (possibly from other -# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the -# cache locations to check for the shared objects. -# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH -# at the end as shown in the examples below. This will be substituted with the -# correct path within the directory structure. -#SSTATE_MIRRORS ?= "\ -#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ -#file://.* file:///some/local/dir/sstate/PATH" - - -# -# Qemu configuration -# -# By default qemu will build with a builtin VNC server where graphical output can be -# seen. The two lines below enable the SDL backend too. This assumes there is a -# libsdl library available on your build system. -PACKAGECONFIG_append_pn-qemu-native = " sdl" -PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" -ASSUME_PROVIDED += "libsdl-native" - -############### -# -# AGL specifics -# -############### - -# AGL includes all kernel modules here for ease-of-use during development. -# Comment this out to be able to select the kernel modules yourself. -IMAGE_INSTALL_append = " kernel-modules" - -# Likewise as we included all kernel modules by default in the filesystem, -# we do not need a separate tarball stored. -# Comment this out to receive the separate modules tarbal again. -MODULE_TARBALL_DEPLOY ?= "0" - -############### -# /END AGL -############### - -# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to -# track the version of this file when it was generated. This can safely be ignored if -# this doesn't mean anything to you. -CONF_VERSION = "1" |