diff options
Diffstat (limited to 'meta-rcar-gen2')
7 files changed, 536 insertions, 0 deletions
diff --git a/meta-rcar-gen2/conf/bblayers.conf.sample b/meta-rcar-gen2/conf/bblayers.conf.sample new file mode 100644 index 0000000..b1c9874 --- /dev/null +++ b/meta-rcar-gen2/conf/bblayers.conf.sample @@ -0,0 +1,26 @@ +# LAYER_CONF_VERSION is increased each time build/conf/bblayers.conf +# changes incompatibly +LCONF_VERSION = "6" + +BBPATH = "${TOPDIR}" +BBFILES ?= "" + +BBLAYERS ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-yocto \ + ##OEROOT##/meta-yocto-bsp \ + ##OEROOT##/../meta-agl/meta-ivi-common \ + ##OEROOT##/../meta-agl/meta-agl \ + ##OEROOT##/../meta-openembedded/meta-oe \ + ##OEROOT##/../meta-openembedded/meta-multimedia \ + ##OEROOT##/../meta-openembedded/meta-ruby \ + ##OEROOT##/../meta-renesas \ + ##OEROOT##/../meta-renesas/meta-rcar-gen2 \ + ##OEROOT##/../meta-agl-demo \ + ##OEROOT##/../meta-qt5 \ + " +BBLAYERS_NON_REMOVABLE ?= " \ + ##OEROOT##/meta \ + ##OEROOT##/meta-yocto \ + ##OEROOT##/../meta-agl/meta-agl \ + " diff --git a/meta-rcar-gen2/conf/conf-notes.txt b/meta-rcar-gen2/conf/conf-notes.txt new file mode 100644 index 0000000..2a92d55 --- /dev/null +++ b/meta-rcar-gen2/conf/conf-notes.txt @@ -0,0 +1,2 @@ +Common target are: + agl-demo-platform diff --git a/meta-rcar-gen2/conf/local.conf.sample b/meta-rcar-gen2/conf/local.conf.sample new file mode 100644 index 0000000..43857ba --- /dev/null +++ b/meta-rcar-gen2/conf/local.conf.sample @@ -0,0 +1,398 @@ +DISTRO = "poky-agl" +MACHINE = "porter" + +# For running GStreamer on wayland (experimental). +# +# Uncoment below if want to use multimedia acceleration on wayland +# +#IMAGE_INSTALL_append_porter = " \ +# gstreamer1.0-plugins-bad-waylandsink \ +# " + +# Additional plugins to test multimedia acceleration (experimental) +# +# Uncoment below if want to use multimedia acceleration +# +#IMAGE_INSTALL_append_porter = " \ +# gstreamer1.0-plugins-base-videorate \ +# gstreamer1.0-plugins-base-videotestsrc \ +# gstreamer1.0-plugins-base-audiotestsrc \ +# gstreamer1.0-plugins-base-alsa \ +# gstreamer1.0-plugins-good-autodetect \ +# gstreamer1.0-plugins-good-isomp4 \ +# gstreamer1.0-plugins-good-video4linux2 \ +# gstreamer1.0-plugins-good-videocrop \ +# gstreamer1.0-plugins-bad-asfmux \ +# gstreamer1.0-plugins-bad-fbdevsink \ +# gstreamer1.0-plugins-bad-faad \ +# gstreamer1.0-plugins-bad-videoparsersbad \ +#" +# for graphics acceleration +# +# Uncoment below if want to use multimedia acceleration +# +#IMAGE_INSTALL_append_porter = " \ +# libegl libegl-dev libgbm-dev \ +# gles-kernel-module gles-user-module \ +# libdrm-tests \ +# libdrm-kms \ +# " + +# for multimedia acceleration +# +# Uncoment below if want to use multimedia acceleration +# +#IMAGE_INSTALL_append_porter = " \ +# packagegroup-rcar-gen2-multimedia \ +# packagegroup-lcb-oss-codecs \ +# alsa-utils alsa-tools \ +#" + +# TODO: When booting weston, someone try to load 'libgbm_kms.so' then +# fail to boot. It should be 'libgbm_kms.so.1'. +# Tentatively, it is to install 'libgbm-dev' pkg. +IMAGE_INSTALL_append = "libgbm-dev" + +LICENSE_FLAGS_WHITELIST = "commercial" + +# Define the name of multimedia, dtv, graphic test, multimedia-test for bbmask +BB_MULTIMEDIA_KERNEL_MODULE = "fdpm-kernel-module|mmngr-kernel-module|\ + mmngrbuf-kernel-module|s3ctl-kernel-module|\ + uvcs-kernel-module|vspm-kernel-module" +BB_MULTIMEDIA_USER_MODULE = "fdpm-user-module|mmngr-user-module|\ + mmngrbuf-user-module|omx-user-module|\ + s3ctl-user-module|vspm-user-module|libmemcpy" +BB_MULTIMEDIA_TEST_MODULE = "fdpm-tp-user-module|mmngr-tp-user-module|\ + mmngrbuf-tp-user-module|s3ctl-tp-user-module|\ + vspm-tp-user-module" +BB_GST_PLUGINS = "meta-renesas/meta-rcar-gen2/recipes-multimedia/gstreamer" +MULTIMEDIA_BB = "${BB_MULTIMEDIA_KERNEL_MODULE}|${BB_MULTIMEDIA_USER_MODULE}|\ + ${BB_MULTIMEDIA_TEST_MODULE}|${BB_GST_PLUGINS}" + +# Enable Multimedia standard pkg +#MACHINE_FEATURES_append = " multimedia" + +# UnMask the multimedia kernel modules +#BBMASK .= "|${BB_MULTIMEDIA_KERNEL_MODULE}" + +# UnMask the multimedia user modules +#BBMASK .= "|${BB_MULTIMEDIA_USER_MODULE}" + +# Include static library in SDK +SDKIMAGE_FEATURES_append = " staticdev-pkgs" + +# Mask the DTV pkgs +#MACHINE_FEATURES_append = " dtv" +BBMASK = "dtv-module|ssp-module|scu-module" + +# Enable graphic pkgs +#BBMASK .= "|gles-kernel-module|gles-user-module" + +# Mask the multimedia-test +BBMASK .= "|${BB_MULTIMEDIA_TEST_MODULE}" + +# Mask the graphic test +BBMASK .= "|gles-test-module" + +#DISTRO_FEATURES_append = " mm-test" +#DISTRO_FEATURES_append = " gles-test" + +# Enable Gfx Pkgs +MACHINE_FEATURES_append = " sgx" +MULTI_PROVIDER_WHITELIST += "virtual/libgl virtual/egl virtual/libgles1 virtual/libgles2" + +# for Wayland/Weston + +PREFERRED_PROVIDER_virtual/libgles1 = "" +PREFERRED_PROVIDER_virtual/libgles2 = "gles-user-module" +PREFERRED_PROVIDER_virtual/egl = "libegl" +PREFERRED_PROVIDER_virtual/libgl = "" +PREFERRED_PROVIDER_virtual/mesa = "" +PREFERRED_PROVIDER_libgbm = "libgbm" +PREFERRED_PROVIDER_libgbm-dev = "libgbm" + +# Setting for u-boot Wayland +UBOOT_MACHINE = "porter_vin_config" + +# Addtional Configurations of Optional OMX modules + +# OMX Media Component H263 Decoder Library +#DISTRO_FEATURES_append = " h263dec_lib" +# OMX Media Component VC-1 Decoder Library +#DISTRO_FEATURES_append = " vc1dec_lib" +# OMX Media Component MPEG-4 Decoder Library +#DISTRO_FEATURES_append = " mpeg4dec_lib" +# VCP3 Driver Adapted for Linux MPEG-2 Decoder Library +#DISTRO_FEATURES_append = " mpeg2dec_lib" +# DivX Decoder Library for Linux +#DISTRO_FEATURES_append = " divxdec_lib" +# Encoder Library for Linux +DISTRO_FEATURES_append = " h264avcenc_lib" + +# Configurations of Optional Audio Decoders +# ARM 5.1ch aacPlus V2 Decoder for Linux +#DISTRO_FEATURES_append = " aacp2dec_lib" +# ARM MP3 Decoder for Linux +#DISTRO_FEATURES_append = " mp3dec_lib" +# ARM WMA Decoder for Linux +#DISTRO_FEATURES_append = " wmadec_lib" +# ARM 5.1ch Dolby Digital Decoder for Linux +#DISTRO_FEATURES_append = " ddddec_lib" +# ARM ALAC Decoder for Linux +#DISTRO_FEATURES_append = " alacdec_lib" +# ARM FLAC Decoder for Linux +#DISTRO_FEATURES_append = " flacdec_lib" +# ARM AAC-LC Decoder Library Sample for Linux +#DISTRO_FEATURES_append = " aaclcsdec_lib" +# ARM AAC Encoder for Linux +#DISTRO_FEATURES_append = " aacenc_lib" + +# Configurations of Optional Audio Middlewares +# ARM 5.1ch aacPlus V2 Decode Middleware for Linux +#DISTRO_FEATURES_append = " armaccp2dec_mdw" +# ARM MP3 Decode Middleware for Linux +#DISTRO_FEATURES_append = " mp3dec_mdw" +# ARM WMA Decode Middleware for Linux +#DISTRO_FEATURES_append = " wmadec_mdw" +# ARM 5.1ch Dolby Digital Decode Middleware for Linux +#DISTRO_FEATURES_append = " ddddec_mdw" +# ARM ALAC Decode Middleware for Linux +#DISTRO_FEATURES_append = " alacdec_mdw" +# ARM FLAC Decode Middleware for Linux +#DISTRO_FEATURES_append = " flacdec_mdw" +# ARM AAC Decode Middleware Sample for Linux +#DISTRO_FEATURES_append = " aacsdec_mdw" +# ARM AAC Encode Middleware for Linux +#DISTRO_FEATURES_append = " aacenc_mdw" + +# +# This file is your local configuration file and is where all local user settings +# are placed. The comments in this file give some guide to the options a new user +# to the system might want to change but pretty much any configuration option can +# be set in this file. More adventurous users can look at local.conf.extended +# which contains other examples of configuration which can be placed in this file +# but new users likely won't need any of them initially. +# +# Lines starting with the '#' character are commented out and in some cases the +# default values are provided as comments to show people example syntax. Enabling +# the option is a question of removing the # character and making any change to the +# variable as required. + +# +# Machine Selection +# +# You need to select a specific machine to target the build with. There are a selection +# of emulated machines available which can boot and run in the QEMU emulator: +# +#MACHINE ?= "qemuarm" +#MACHINE ?= "qemumips" +#MACHINE ?= "qemuppc" +#MACHINE ?= "qemux86" +#MACHINE ?= "qemux86-64" +# +# There are also the following hardware board target machines included for +# demonstration purposes: +# +#MACHINE ?= "beaglebone" +#MACHINE ?= "genericx86" +#MACHINE ?= "genericx86-64" +#MACHINE ?= "mpc8315e-rdb" +#MACHINE ?= "edgerouter" +# +# This sets the default machine to be qemux86 if no other machine is selected: +MACHINE ??= "qemux86-64" + +# +# Where to place downloads +# +# During a first build the system will download many different source code tarballs +# from various upstream projects. This can take a while, particularly if your network +# connection is slow. These are all stored in DL_DIR. When wiping and rebuilding you +# can preserve this directory to speed up this part of subsequent builds. This directory +# is safe to share between multiple builds on the same machine too. +# +# The default is a downloads directory under TOPDIR which is the build directory. +# +#DL_DIR ?= "${TOPDIR}/downloads" + +# +# Where to place shared-state files +# +# BitBake has the capability to accelerate builds based on previously built output. +# This is done using "shared state" files which can be thought of as cache objects +# and this option determines where those files are placed. +# +# You can wipe out TMPDIR leaving this directory intact and the build would regenerate +# from these files if no changes were made to the configuration. If changes were made +# to the configuration, only shared state files where the state was still valid would +# be used (done using checksums). +# +# The default is a sstate-cache directory under TOPDIR. +# +#SSTATE_DIR ?= "${TOPDIR}/sstate-cache" + +# +# Where to place the build output +# +# This option specifies where the bulk of the building work should be done and +# where BitBake should place its temporary files and output. Keep in mind that +# this includes the extraction and compilation of many applications and the toolchain +# which can use Gigabytes of hard disk space. +# +# The default is a tmp directory under TOPDIR. +# +#TMPDIR = "${TOPDIR}/tmp" + +# +# Default policy config +# +# The distribution setting controls which policy settings are used as defaults. +# The default value is fine for general Yocto project use, at least initially. +# Ultimately when creating custom policy, people will likely end up subclassing +# these defaults. +# +DISTRO ?= "poky" +# As an example of a subclass there is a "bleeding" edge policy configuration +# where many versions are set to the absolute latest code from the upstream +# source control systems. This is just mentioned here as an example, its not +# useful to most new users. +# DISTRO ?= "poky-bleeding" + +# +# Package Management configuration +# +# This variable lists which packaging formats to enable. Multiple package backends +# can be enabled at once and the first item listed in the variable will be used +# to generate the root filesystems. +# Options are: +# - 'package_deb' for debian style deb files +# - 'package_ipk' for ipk files are used by opkg (a debian style embedded package manager) +# - 'package_rpm' for rpm style packages +# E.g.: PACKAGE_CLASSES ?= "package_rpm package_deb package_ipk" +# We default to rpm: +PACKAGE_CLASSES ?= "package_rpm" + +# +# SDK/ADT target architecture +# +# This variable specifies the architecture to build SDK/ADT items for and means +# you can build the SDK packages for architectures other than the machine you are +# running the build on (i.e. building i686 packages on an x86_64 host). +# Supported values are i686 and x86_64 +#SDKMACHINE ?= "i686" + +# +# Extra image configuration defaults +# +# The EXTRA_IMAGE_FEATURES variable allows extra packages to be added to the generated +# images. Some of these options are added to certain image types automatically. The +# variable can contain the following options: +# "dbg-pkgs" - add -dbg packages for all installed packages +# (adds symbol information for debugging/profiling) +# "dev-pkgs" - add -dev packages for all installed packages +# (useful if you want to develop against libs in the image) +# "ptest-pkgs" - add -ptest packages for all ptest-enabled packages +# (useful if you want to run the package test suites) +# "tools-sdk" - add development tools (gcc, make, pkgconfig etc.) +# "tools-debug" - add debugging tools (gdb, strace) +# "eclipse-debug" - add Eclipse remote debugging support +# "tools-profile" - add profiling tools (oprofile, exmap, lttng, valgrind) +# "tools-testapps" - add useful testing tools (ts_print, aplay, arecord etc.) +# "debug-tweaks" - make an image suitable for development +# e.g. ssh root access has a blank password +# There are other application targets that can be used here too, see +# meta/classes/image.bbclass and meta/classes/core-image.bbclass for more details. +# We default to enabling the debugging tweaks. +EXTRA_IMAGE_FEATURES = "debug-tweaks" + +# +# Additional image features +# +# The following is a list of additional classes to use when building images which +# enable extra features. Some available options which can be included in this variable +# are: +# - 'buildstats' collect build statistics +# - 'image-mklibs' to reduce shared library files size for an image +# - 'image-prelink' in order to prelink the filesystem image +# - 'image-swab' to perform host system intrusion detection +# NOTE: if listing mklibs & prelink both, then make sure mklibs is before prelink +# NOTE: mklibs also needs to be explicitly enabled for a given image, see local.conf.extended +USER_CLASSES ?= "buildstats image-mklibs image-prelink" + +# +# Runtime testing of images +# +# The build system can test booting virtual machine images under qemu (an emulator) +# after any root filesystems are created and run tests against those images. To +# enable this uncomment this line. See classes/testimage(-auto).bbclass for +# further details. +#TEST_IMAGE = "1" +# +# Interactive shell configuration +# +# Under certain circumstances the system may need input from you and to do this it +# can launch an interactive shell. It needs to do this since the build is +# multithreaded and needs to be able to handle the case where more than one parallel +# process may require the user's attention. The default is iterate over the available +# terminal types to find one that works. +# +# Examples of the occasions this may happen are when resolving patches which cannot +# be applied, to use the devshell or the kernel menuconfig +# +# Supported values are auto, gnome, xfce, rxvt, screen, konsole (KDE 3.x only), none +# Note: currently, Konsole support only works for KDE 3.x due to the way +# newer Konsole versions behave +#OE_TERMINAL = "auto" +# By default disable interactive patch resolution (tasks will just fail instead): +PATCHRESOLVE = "noop" + +# +# Disk Space Monitoring during the build +# +# Monitor the disk space during the build. If there is less that 1GB of space or less +# than 100K inodes in any key build location (TMPDIR, DL_DIR, SSTATE_DIR), gracefully +# shutdown the build. If there is less that 100MB or 1K inodes, perform a hard abort +# of the build. The reason for this is that running completely out of space can corrupt +# files and damages the build in ways which may not be easily recoverable. +BB_DISKMON_DIRS = "\ + STOPTASKS,${TMPDIR},1G,100K \ + STOPTASKS,${DL_DIR},1G,100K \ + STOPTASKS,${SSTATE_DIR},1G,100K \ + ABORT,${TMPDIR},100M,1K \ + ABORT,${DL_DIR},100M,1K \ + ABORT,${SSTATE_DIR},100M,1K" + +# +# Shared-state files from other locations +# +# As mentioned above, shared state files are prebuilt cache data objects which can +# used to accelerate build time. This variable can be used to configure the system +# to search other mirror locations for these objects before it builds the data itself. +# +# This can be a filesystem directory, or a remote url such as http or ftp. These +# would contain the sstate-cache results from previous builds (possibly from other +# machines). This variable works like fetcher MIRRORS/PREMIRRORS and points to the +# cache locations to check for the shared objects. +# NOTE: if the mirror uses the same structure as SSTATE_DIR, you need to add PATH +# at the end as shown in the examples below. This will be substituted with the +# correct path within the directory structure. +#SSTATE_MIRRORS ?= "\ +#file://.* http://someserver.tld/share/sstate/PATH;downloadfilename=PATH \n \ +#file://.* file:///some/local/dir/sstate/PATH" + + +# +# Qemu configuration +# +# By default qemu will build with a builtin VNC server where graphical output can be +# seen. The two lines below enable the SDL backend too. This assumes there is a +# libsdl library available on your build system. +PACKAGECONFIG_append_pn-qemu-native = " sdl" +PACKAGECONFIG_append_pn-nativesdk-qemu = " sdl" +ASSUME_PROVIDED += "libsdl-native" + + +# CONF_VERSION is increased each time build/conf/ changes incompatibly and is used to +# track the version of this file when it was generated. This can safely be ignored if +# this doesn't mean anything to you. +CONF_VERSION = "1" diff --git a/meta-rcar-gen2/recipes-kernel/linux/linux-renesas/0008-drm-rcar-du-r8a7791-disable-interlace-mode.patch b/meta-rcar-gen2/recipes-kernel/linux/linux-renesas/0008-drm-rcar-du-r8a7791-disable-interlace-mode.patch new file mode 100644 index 0000000..012bc94 --- /dev/null +++ b/meta-rcar-gen2/recipes-kernel/linux/linux-renesas/0008-drm-rcar-du-r8a7791-disable-interlace-mode.patch @@ -0,0 +1,26 @@ +From 9fba622435c36541df97c60b2d7ade25039508de Mon Sep 17 00:00:00 2001 +From: Yannick GICQUEL <yannick.gicquel@iot.bzh> +Date: Tue, 29 Sep 2015 09:02:55 +0200 +Subject: [PATCH] drm: rcar-du: r8a7791: disable interlace mode + +Signed-off-by: Yannick GICQUEL <yannick.gicquel@iot.bzh> +--- + drivers/gpu/drm/rcar-du/rcar_du_drv.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c +index c6b9292..5512c7a 100644 +--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c ++++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c +@@ -443,7 +443,7 @@ static const struct rcar_du_device_info rcar_du_r8a7791_info = { + .drgbs_bit = 1, + .max_xres = 1920, + .max_yres = 1080, +- .interlace = true, ++ .interlace = false, + .lvds0_crtc = BIT(0), + .lvds1_crtc = 0, + .vspd_crtc = BIT(0) | BIT(1), +-- +1.9.1 + diff --git a/meta-rcar-gen2/recipes-kernel/linux/linux-renesas/0021-drm-rcar-du-r8a7794-disable-interlace-mode.patch b/meta-rcar-gen2/recipes-kernel/linux/linux-renesas/0021-drm-rcar-du-r8a7794-disable-interlace-mode.patch new file mode 100644 index 0000000..751e657 --- /dev/null +++ b/meta-rcar-gen2/recipes-kernel/linux/linux-renesas/0021-drm-rcar-du-r8a7794-disable-interlace-mode.patch @@ -0,0 +1,26 @@ +From 66ea15820ce0a4d093ec7d8a3c4c788f3e5b4bc7 Mon Sep 17 00:00:00 2001 +From: Yannick GICQUEL <yannick.gicquel@iot.bzh> +Date: Mon, 28 Sep 2015 20:46:30 +0200 +Subject: [PATCH] drm: rcar-du: r8a7794: disable interlace mode + +Signed-off-by: Yannick GICQUEL <yannick.gicquel@iot.bzh> +--- + drivers/gpu/drm/rcar-du/rcar_du_drv.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/drivers/gpu/drm/rcar-du/rcar_du_drv.c b/drivers/gpu/drm/rcar-du/rcar_du_drv.c +index f7da606..c48d16d 100644 +--- a/drivers/gpu/drm/rcar-du/rcar_du_drv.c ++++ b/drivers/gpu/drm/rcar-du/rcar_du_drv.c +@@ -650,7 +650,7 @@ static const struct rcar_du_device_info rcar_du_r8a7794_info = { + .drgbs_bit = 0, + .max_xres = 1920, + .max_yres = 1080, +- .interlace = true, ++ .interlace = false, + .lvds0_crtc = 0, + .lvds1_crtc = 0, + .vspd_crtc = BIT(0), +-- +1.9.1 + diff --git a/meta-rcar-gen2/recipes-kernel/linux/linux-renesas_3.10.bb b/meta-rcar-gen2/recipes-kernel/linux/linux-renesas_3.10.bb index 5d7e9f4..b287f3f 100644 --- a/meta-rcar-gen2/recipes-kernel/linux/linux-renesas_3.10.bb +++ b/meta-rcar-gen2/recipes-kernel/linux/linux-renesas_3.10.bb @@ -45,6 +45,7 @@ SRC_URI_append_porter = " \ file://0005-ARM-shmobile-porter-Sound-DMA-support-via-SRC-on-DTS.patch \ file://0006-ARM-shmobile-porter-Sound-DMA-support-via-DVC-on-DTS.patch \ file://0007-ARM-shmobile-porter-Fix-audio-clk-master-to-SSI-and-.patch \ + file://0008-drm-rcar-du-r8a7791-disable-interlace-mode.patch \ " SRC_URI_append_silk = " \ @@ -67,6 +68,7 @@ SRC_URI_append_silk = " \ file://0018-porter-can-support.patch \ file://0019-i2c-busses-rcar-Workaround-arbitration-loss-error.patch \ file://0020-Silk-Remove-I2C1-clock-from-clk_enables.patch \ + file://0021-drm-rcar-du-r8a7794-disable-interlace-mode.patch \ " S = "${WORKDIR}/git" diff --git a/meta-rcar-gen2/scripts/setup_mm_packages.sh b/meta-rcar-gen2/scripts/setup_mm_packages.sh new file mode 100644 index 0000000..9fed901 --- /dev/null +++ b/meta-rcar-gen2/scripts/setup_mm_packages.sh @@ -0,0 +1,56 @@ +#!/bin/bash + +MM_PKG_REVISION="20150727" + +MM_PKG_NAME="R-Car_Series_Evaluation_Software_Package" +MM_PKG_USERLAND="for_Linux" +MM_PKG_KERNEL="of_Linux_Drivers" + +ZIP_1=${MM_PKG_NAME}_${MM_PKG_USERLAND}-${MM_PKG_REVISION}.zip +ZIP_2=${MM_PKG_NAME}_${MM_PKG_KERNEL}-${MM_PKG_REVISION}.zip + +COPY_GFX_SCRIPT=copy_gfx_software_$1.sh +COPY_MM_SCRIPT=copy_mm_software_lcb.sh + +test -f ${XDG_CONFIG_HOME:-~/.config}/user-dirs.dirs && source ${XDG_CONFIG_HOME:-~/.config}/user-dirs.dirs +DOWNLOAD_DIR=${XDG_DOWNLOAD_DIR:-$HOME/Downloads} + +function copy_mm_packages() { + if [ ! -d binary-tmp ]; then + if [ -f $DOWNLOAD_DIR/$ZIP_1 -a -f $DOWNLOAD_DIR/$ZIP_2 ]; then + mkdir binary-tmp + cd binary-tmp + unzip -o $DOWNLOAD_DIR/$ZIP_1 + unzip -o $DOWNLOAD_DIR/$ZIP_2 + cd .. + else + echo -n "The graphics and multimedia acceleration packages for " + echo -e "the R-Car M2 Porter board can be download from :" + echo -e " <http://www.renesas.com/secret/r_car_download/rcar_demoboard.jsp>" + echo -e + echo -n "These 2 files from there should be store in your" + echo -e "'$DOWNLOAD_DIR' directory." + echo -e " $ZIP_1" + echo -e " $ZIP_2" + return -1 + fi + fi + + if [ -f meta-renesas/meta-rcar-gen2/$COPY_GFX_SCRIPT ]; then + cd meta-renesas/meta-rcar-gen2/ + ./$COPY_GFX_SCRIPT ../../binary-tmp + cd ../.. + else + echo "scripts to copy GFX drivers for '$1' not found." + return -1 + fi + + if [ -f meta-renesas/meta-rcar-gen2/$COPY_MM_SCRIPT ]; then + cd meta-renesas/meta-rcar-gen2/ + ./$COPY_MM_SCRIPT ../../binary-tmp + cd ../.. + else + echo "scripts to copy MM software for '$1' not found." + return -1 + fi +} |