| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
enable some kernel features:
EXT4_FS, FANOTIFY: alignment on agl-spec section 7.4.1.,
POSIX_MQUEUE: standard efficient Posix ipc mechanism,
TUN: useful for a VPN link establishment on V2I use-case,
when distro is built with debug-tweaks:
LOOP: for LTP testcase better coverage,
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
|
|
Sound is inaudible when starting a Porter/Koelsch board,
because default state of their sound mixer is muted.
Add a "alsa-utils-config" recipe which will be commented
out, but available in local.conf, to preconfigure their
mixer. Sound volume will be approximately 25% of maximum.
Change-Id: Iaf60f612f8e01e7aa51f8a0558de00f26d36aee8
Signed-off-by: Manuel Bachmann <mbc@iot.bzh>
|
|
Because we currently don't use QtWebkit for DEMO apps,
QtWebkit has been removed from packages to be installed into
agl-demo-platform to reduce build time.
Change-Id: I8368041224fe420b2a9583c81aa3ab21466ac059
Signed-off-by: Tadao Tnikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Here is the backport of all patches relating to smack support
on kernel side. For more details, see file:
meta-rcar-gen2/recipes-kernel/linux/linux-renesas/smack/README
Please note that patches are applied only if "smack" is in the
ditro features. Here are the 2 lines to add in the local.conf
OVERRIDES .= ":smack"
DISTRO_FEATURES_append = " smack"
Change-Id: I147a3532aec531f977d6ec34c576261835711f1e
Signed-off-by: Yannick GICQUEL <yannick.gicquel@iot.bzh>
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
This is for CES demo hardening and may be reworked or
removed for a product.
Change-Id: I45d708e873cbe8ce7d454ebcae31f24d51055736
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
Signed-off-by: Manuel Bachmann <mbc@iot.bzh>
|
|
Change-Id: I4bd0478dd881bc557e2d64bb06693f4d011f9010
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
|
|
IPv6 and autofs4 are required by systemd.
Schedstats are required by systemd-bootchartd.
(...)
systemd[1]: Your kernel apparently lacks built-in autofs4 support. Might be a good idea to compile it in. We'll now try to work around this by loading the module...
systemd[1]: could not find module by name='autofs4'
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Your kernel apparently lacks built-in ipv6 support. Might be a good idea to compile it in. We'll now try to work around this by loading the module...
systemd[1]: could not find module by name='ipv6'
systemd[1]: Failed to insert module 'ipv6'
(...)
Change-Id: Ieb53a0f6ae21f5787854d045fb7ca4c5c6e4d17f
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
|
|
Psplash already use the display during boot sequence.
No need to display logo nor console.
Change-Id: I487332a27e1870ba9bcb68ccb98a61f02a3eb862
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
|
|
Change-Id: Iab131e1d4784b3c08b593f6119d3c68d7f441116
Signed-off-by: Jan-Simon Möller <jsmoeller@linuxfoundation.org>
|
|
|
|
In order to have Bluetooth hardware detection, and to make
BlueZ commands (such as "hciconfig", "hcitool"...) work,
we need to enable kernel functionalities. Some of them are
designed to be run as modules.
We also make sure that all images include them, since it
does not depend on a specific board's hardware.
PS : we will only build them if "bluetooth" has been
specified in DISTRO_FEATURES, hence saving time.
Change-Id: I14e1bdd7e4e63a7484bb1516dda601e3c03fd58f
Signed-off-by: Manuel Bachmann <mbc@iot.bzh>
|
|
We need HID_MULTITOUCH for modern external USB touchscreens
on Silk/Koelsch/Porter boards.
Change-Id: Ie0aea64ca7d0dd79a25da17b861502c1b70235df
Author: Yannick GICQUEL <yannick.gicquel@iot.bzh>
Signed-off-by: Manuel Bachmann <mbc@iot.bzh>
|
|
* agl/genivi-7.0-bsp-1.8.0:
r-car e2 (alt/silk): mesa: Temporary workaround to upstream Mesa build issue
multimedia: Remove unnecessary do_install_append from omx-user-module
multimedia: gstreamer1.0-* fix configure for out of tree build on git recipes
r-car m2: set PREFERRED_VERSION_gstreamer1.0-omx* to 1.0.% when h/w acceleration enabled
multimedia: add RPROVIDES for multimedia kernel modules
Configure linux-renesas to build uinput
Conflicts:
meta-rcar-gen2/recipes-multimedia/omx-module/omx-user-module.bb
Change-Id: Id8bf7749e75fa2cf5e418b81a33659285e46532c
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
This commit generalises an earlier workaround for the Alt board to all
R-Car E2 based boards.
Temporarily disable Cortex A7 optimisation to avoid upstream build issue
between YP 1.7 gcc toolchain and Mesa 10.1,x releases. The build goes away
and never returns. Graphics acceleration makes no use of Mesa so there
should be no performance impact. This should be removed once upstream is fixed.
|
|
Remove do_install_append that did processing for Porter/Silk that
is no longer required with the current deliverables.
|
|
Integrate upstream Poky meta fix 6ede9224f82a [1] to the Poky Gst .bb recipes
into the R-Car .bbappends.This fixes a do_config build error when building
with multimedia acceleration enabled.
Thank you to Tadao Tanikawa and his work on this within AGL:
https://gerrit.automotivelinux.org/gerrit/#/c/4061/1
[1] http://git.yoctoproject.org/cgit/cgit.cgi/poky/commit/meta/recipes-multimedia/gstreamer?h=dizzy&id=6ede9224f82a37dc1cfb48837c40d28996892652
|
|
acceleration enabled
The R-Car M2 multimedia acceleration provides acceleration support for GStreamer 1.2.3
and OMX 1.0, so set the preferred version to 1.0.% when acceleration is enabled. Required
for meta-ivi which supports both Gst 1.2.3/OMX 1.0 and 1.4.x/1.2 but defaults to 1.4.x/1.2.
Thank you to Tadao Tanikawa and his work on this within AGL:
https://gerrit.automotivelinux.org/gerrit/#/c/4061/1
|
|
Add the multimedia acceleration kernel modules to the RPROVIDES variable of the
appropriate recipes. This fixes build errors of the following form at do_roofs time
when RPM packaging is used:
error: Can't install <foo>@MACHINE: no package provides <bar>
Thank you to Tadao Tanikawa for his work on this within AGL [1]
[1] https://gerrit.automotivelinux.org/gerrit/#/c/4061/1
|
|
This copying script is used from meta-agl/scripts/envsetup.sh when integrate
AGL Distribution with repo.
This script copy gfx drivers & multimedia packages for R-Car2 M2 Porter board.
IMPORTANT NOTE: Before running this scripts, proprietary binaries should be
downloaded manually, because they require click-though license agreement
to download and use them.
There are 2 tarballs to be downloaded and stored into your
$XDG_DOWNLOAD_DIR (e.g. $HOME/Downloads)
You can check where your XDG_DOWNLOAD_DIR is by this command:
$ test -f ${XDG_CONFIG_HOME:-~/.config}/user-dirs.dirs && source ${XDG_CONFIG_HOME:-~/.config}/user-dirs.dirs
$ echo ${XDG_DOWNLOAD_DIR:-$HOME/Downloads}
Ideally, they should be able to download automatically by recipes in
meta-renesas, but we cannot use this way for now.
Change-Id: I50831855e95b81f4f702f52ce78b79b4b5c837e6
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Configure linux-renesas to enable INPUT_UINPUT
|
|
The meta-rcar-gen2 layer pulls meta-agl-demo as a BBLAYER ;
it has recently been updated to contain Qt5 .bbappends.
In order to avoid errors due to missing base recipes, add
"meta-qt5" and "meta-openembedded/meta-ruby" layers to the
default layers. This allows building agl-demo-platform
out-of-the-box.
Change-Id: I655b7aa117d425a898ba7eb8303f648bf79efce6
Signed-off-by: Manuel Bachmann <mbc@iot.bzh>
|
|
The uinput module is useful for automated testing as it allows
user-space programmes to create and use virtual input devices.
An alternative way of doing this might be to add configuration using the
way recommended by
http://www.yoctoproject.org/docs/1.7.2/kernel-dev/kernel-dev.html#changing-the-configuration,
but I was unable to get that working.
Signed-off-by: Jonathan Maw <jonathan.maw@codethink.co.uk>
|
|
This change default configuration of rcar-du driver to avoid
flickering on HDMI plug. This may be related to misalignment
between ADV7511 and the SoC (tbc).
This issue was observed on two different screen models.
Change-Id: I1509e046fd7d46f6b74ea0bd96d5d41116d2f89a
Signed-off-by: Yannick GICQUEL <yannick.gicquel@iot.bzh>
|
|
This change default configuration of rcar-du driver to avoid
flickering on HDMI plug. This may be related to misalignment
between ADV7511 and the SoC (tbc).
This issue was observed on two different screen models.
Change-Id: I161b9d659c14de7fa5b0ce4b55fb5cf968c11e3f
Signed-off-by: Yannick GICQUEL <yannick.gicquel@iot.bzh>
|
|
To eanble H/W acceleration of multimedia at agl-demo-platform
running on porter board, template of configurations are updated.
For more detail and how to use this template configurations, see
README.md in meta-agl-demo.
Change-Id: I6ab0ec936ea4572a2ccfd8d7b18141bcbca16ea8
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
When building meta-renesas with enabling multimedia binary packages
provided by Renesas, there are some build issue.
This should be removed once upstream is fixed.
Change-Id: Ia83cc3fa0b02ebfc660e1e2dd50f1a5c8e1fddc9
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Change-Id: Ib6f42400e99ec1a95cdf139d31fb18ea1ba3314e
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Temporarily disable Cortex A7 optimisation to avoid upstream build issue
between YP 1.7 gcc toolchain and Mesa 10.1,x releases. The build goes away
and never returns. Graphics acceleration makes no use of Mesa so there
should be no performance impact. This should be removed once upstream is fixed.
|
|
Takeshi Saito is now the maintainer of the non-Genivi layers
|
|
To correspond with adding meta-ivi-common, template of BBLAYERS
configuration for meta-agl is updated.
Change-Id: I991bfd1de3618927f6bd9151924a9109ac29c451
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
For more detail, see README.md in meta-agl.
Change-Id: Ie0807e58fdae903593a8cd6071ecc9408feb5d61
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Add the copy scripts that locate the graphics and multimedia acceleration
files in the "click through" license downloads and copies them into
the correct location in the R-Car Yocto BSP layers
|
|
enabled
The R-Car M2 multimedia acceleration provides acceleration support for GStreamer 1.2.3,
so set the preferred version to 1.2.%. Required for meta-ivi which supports both 1.2.3
and 1.4.x but defaults to 1.4.x.
Both M2 Koelsch and M2 Porter boards are supported, so generalise the previous
Kolesch only setting to all M2 boards. Also make the setting dependent on h/w
acceleration being enabled, else use 1.4.x. This solves a build issue when the
s/w rendered 1.2.x was built when h/w acceleration was not enabled.
|
|
Kernel BSP v1.9.0 contained a backported ASoC and dma descriptor mode driver for AUDIO-DMAC from the upstream kernel.
This patch series migrates the R-Car M2 Porter board audio from platform data to DTS to make use of this driver and
restore audio on the board.
|
|
Add some initial basic information for people using the BSP with Genivi
Platforms such as the Genivi Demo Platform.
|
|
The Koelsch multimedia acceleration provides acceleration support for GStreamer 1.2.3.
So set the preferred version to 1.2.%. Required for meta-ivi which supports both 1.2.3
and 1.4.x but defaults to 1.4.x.
|
|
The GLES user module has a runtime dependency on the GLES kernel module.
Make that clear by adding an RDEPENDS for it.
|
|
kernel-module-dc-linuxfb
The package provides modules that are not found when do_rootfs installs dependent
packages for certain package configurations. Add them to the RPROVIDES so they are found.
Fixes do_rootfs build errors of the form:
error: Can't install <foo>0@koelsch: no package provides <bar>
|
|
libegl-dev provides libegl.so but this is not found when do_rootfs installs dependent packages
for certain package configurations. Add RPROVIDES so it is found.
Fixes do_rootfs build errors of the form:
error: Can't install gles-user-module-1.0-r0@koelsch: no package provides libEGL.so
|
|
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
|
|
From Intrepid the Genivi Yocto Baseline maintainers set 3.14 as the default kernel version
for the QEMU machines they support. So we now override that to avoid a long list of build
messages stating it is switching from 3.14 to 3.10.
|
|
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
|
|
For Yocto Project 1.7 and Genivi 7.0 we have adopted the Yocto Project gcc toolchain.
Removed the PREFERRED variables related to the linaro toolchain
|
|
For Yocto project 1.7 and Genivi 7.0 we have adopted the YP gcc toolchain,
therefore remove the linaro toolchain bbappend.
|
|
Yocto project 1.7 switched from eglibc to glibc, therefore remove the eglibc bbappend.
|
|
Changed as part of update to YP 1.7
|
|
Changed as part of the update to YP 1.7
|
|
Changed as part of the update to YP 1.7
|
|
The current bbappend makes a simple change and seems to be a good candidate for using a version wildcard to avoid churn in the commit log just to rev the filename. Changed as part of the update to YP 1.7.
|
|
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
|
Yannick Gicquel
Manuel Bachmann
Tadao Tnikawa
Jan-Simon Möller
Walt Miner
Stephen Lawrence
Jonathan Maw
Florin Sarbu
Nobuhiro Iwamatsu