summaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)AuthorFilesLines
2015-09-29Configure linux-renesas to build uinputJonathan Maw1-0/+3
The uinput module is useful for automated testing as it allows user-space programmes to create and use virtual input devices. An alternative way of doing this might be to add configuration using the way recommended by http://www.yoctoproject.org/docs/1.7.2/kernel-dev/kernel-dev.html#changing-the-configuration, but I was unable to get that working. Signed-off-by: Jonathan Maw <jonathan.maw@codethink.co.uk>
2015-08-20alt: mesa: Temporary workaround to upstream Mesa build issueStephen Lawrence1-0/+4
Temporarily disable Cortex A7 optimisation to avoid upstream build issue between YP 1.7 gcc toolchain and Mesa 10.1,x releases. The build goes away and never returns. Graphics acceleration makes no use of Mesa so there should be no performance impact. This should be removed once upstream is fixed.
2015-08-20readme/maintainers: Change maintainer of non-Genivi layersStephen Lawrence2-4/+4
Takeshi Saito is now the maintainer of the non-Genivi layers
2015-07-27porter, silk: Add copy scripts for gfx and multimedia accelerationStephen Lawrence3-0/+192
Add the copy scripts that locate the graphics and multimedia acceleration files in the "click through" license downloads and copies them into the correct location in the R-Car Yocto BSP layers
2015-06-19r-car m2: set PREFERRED_VERSION_gstreamer1.0* to 1.2.% when h/w acceleration ↵Stephen Lawrence2-8/+9
enabled The R-Car M2 multimedia acceleration provides acceleration support for GStreamer 1.2.3, so set the preferred version to 1.2.%. Required for meta-ivi which supports both 1.2.3 and 1.4.x but defaults to 1.4.x. Both M2 Koelsch and M2 Porter boards are supported, so generalise the previous Kolesch only setting to all M2 boards. Also make the setting dependent on h/w acceleration being enabled, else use 1.4.x. This solves a build issue when the s/w rendered 1.2.x was built when h/w acceleration was not enabled.
2015-04-08porter: kernel: migrate porter board audio from platform data to DTSStephen Lawrence8-0/+440
Kernel BSP v1.9.0 contained a backported ASoC and dma descriptor mode driver for AUDIO-DMAC from the upstream kernel. This patch series migrates the R-Car M2 Porter board audio from platform data to DTS to make use of this driver and restore audio on the board.
2015-03-25readme/maintainers: Add Genivi informationStephen Lawrence3-2/+14
Add some initial basic information for people using the BSP with Genivi Platforms such as the Genivi Demo Platform.
2015-03-25koelsch: set PREFERRED_VERSION_gstreamer1.0 to 1.2.%Stephen Lawrence1-0/+8
The Koelsch multimedia acceleration provides acceleration support for GStreamer 1.2.3. So set the preferred version to 1.2.%. Required for meta-ivi which supports both 1.2.3 and 1.4.x but defaults to 1.4.x.
2015-03-25gles-user-module: Add RDEPENDS for gles-kernel-moduleStephen Lawrence1-0/+2
The GLES user module has a runtime dependency on the GLES kernel module. Make that clear by adding an RDEPENDS for it.
2015-03-25gles-kernel-module: Add RPROVIDES for kernel-module-pvrsrvkm ↵Stephen Lawrence1-0/+1
kernel-module-dc-linuxfb The package provides modules that are not found when do_rootfs installs dependent packages for certain package configurations. Add them to the RPROVIDES so they are found. Fixes do_rootfs build errors of the form: error: Can't install <foo>0@koelsch: no package provides <bar>
2015-03-25libegl: Add RPROVIDES for libegl.soStephen Lawrence1-0/+1
libegl-dev provides libegl.so but this is not found when do_rootfs installs dependent packages for certain package configurations. Add RPROVIDES so it is found. Fixes do_rootfs build errors of the form: error: Can't install gles-user-module-1.0-r0@koelsch: no package provides libEGL.so
2015-03-25mesa: Add patch for compiling mesa when drm platform is not set.Florin Sarbu2-0/+64
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
2015-03-25kernel: Set PREFERRED_VERSION as 3.10%Stephen Lawrence1-0/+3
From Intrepid the Genivi Yocto Baseline maintainers set 3.14 as the default kernel version for the QEMU machines they support. So we now override that to avoid a long list of build messages stating it is switching from 3.14 to 3.10.
2015-03-25linux.inc: Enable support for CGROUPS Enable FHANDLE for serial consoleFlorin Sarbu1-0/+13
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
2015-03-25rcar-gen2 machines: Remove linaro toolchain related PREFERRED variablesStephen Lawrence1-8/+0
For Yocto Project 1.7 and Genivi 7.0 we have adopted the Yocto Project gcc toolchain. Removed the PREFERRED variables related to the linaro toolchain
2015-03-25YP 1.7: For YP 1.7 we have adopted the YP gcc toolchain. Remove linaro bbappendStephen Lawrence1-1/+0
For Yocto project 1.7 and Genivi 7.0 we have adopted the YP gcc toolchain, therefore remove the linaro toolchain bbappend.
2015-03-25eglibc: YP 1.7 has switched to glibc. Remove eglic bbappendStephen Lawrence1-1/+0
Yocto project 1.7 switched from eglibc to glibc, therefore remove the eglibc bbappend.
2015-03-25mesa: Rename mesa bbappend to use wildcard for minor versionStephen Lawrence1-0/+0
Changed as part of update to YP 1.7
2015-03-25cogl: Rename cogl bbappend to use wildcard for minor version numberStephen Lawrence1-0/+0
Changed as part of the update to YP 1.7
2015-03-25gtk+: Rename gtk bbappend to use wildcard for minor numberStephen Lawrence1-0/+0
Changed as part of the update to YP 1.7
2015-03-25qemu: Rename qemu bbappend to use version wildcardStephen Lawrence1-0/+0
The current bbappend makes a simple change and seems to be a good candidate for using a version wildcard to avoid churn in the commit log just to rev the filename. Changed as part of the update to YP 1.7.
2015-03-25commit BSP v1.8.0Nobuhiro Iwamatsu248-0/+23218
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>