Age | Commit message (Collapse) | Author | Files | Lines |
|
enable some kernel features:
EXT4_FS, FANOTIFY: alignment on agl-spec section 7.4.1.,
POSIX_MQUEUE: standard efficient Posix ipc mechanism,
TUN: useful for a VPN link establishment on V2I use-case,
when distro is built with debug-tweaks:
LOOP: for LTP testcase better coverage,
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
|
|
Here is the backport of all patches relating to smack support
on kernel side. For more details, see file:
meta-rcar-gen2/recipes-kernel/linux/linux-renesas/smack/README
Please note that patches are applied only if "smack" is in the
ditro features. Here are the 2 lines to add in the local.conf
OVERRIDES .= ":smack"
DISTRO_FEATURES_append = " smack"
Change-Id: I147a3532aec531f977d6ec34c576261835711f1e
Signed-off-by: Yannick GICQUEL <yannick.gicquel@iot.bzh>
Signed-off-by: José Bollo <jose.bollo@iot.bzh>
|
|
IPv6 and autofs4 are required by systemd.
Schedstats are required by systemd-bootchartd.
(...)
systemd[1]: Your kernel apparently lacks built-in autofs4 support. Might be a good idea to compile it in. We'll now try to work around this by loading the module...
systemd[1]: could not find module by name='autofs4'
systemd[1]: Failed to insert module 'autofs4'
systemd[1]: Your kernel apparently lacks built-in ipv6 support. Might be a good idea to compile it in. We'll now try to work around this by loading the module...
systemd[1]: could not find module by name='ipv6'
systemd[1]: Failed to insert module 'ipv6'
(...)
Change-Id: Ieb53a0f6ae21f5787854d045fb7ca4c5c6e4d17f
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
|
|
Psplash already use the display during boot sequence.
No need to display logo nor console.
Change-Id: I487332a27e1870ba9bcb68ccb98a61f02a3eb862
Signed-off-by: Yannick Gicquel <yannick.gicquel@iot.bzh>
|
|
|
|
In order to have Bluetooth hardware detection, and to make
BlueZ commands (such as "hciconfig", "hcitool"...) work,
we need to enable kernel functionalities. Some of them are
designed to be run as modules.
We also make sure that all images include them, since it
does not depend on a specific board's hardware.
PS : we will only build them if "bluetooth" has been
specified in DISTRO_FEATURES, hence saving time.
Change-Id: I14e1bdd7e4e63a7484bb1516dda601e3c03fd58f
Signed-off-by: Manuel Bachmann <mbc@iot.bzh>
|
|
We need HID_MULTITOUCH for modern external USB touchscreens
on Silk/Koelsch/Porter boards.
Change-Id: Ie0aea64ca7d0dd79a25da17b861502c1b70235df
Author: Yannick GICQUEL <yannick.gicquel@iot.bzh>
Signed-off-by: Manuel Bachmann <mbc@iot.bzh>
|
|
* agl/genivi-7.0-bsp-1.8.0:
r-car e2 (alt/silk): mesa: Temporary workaround to upstream Mesa build issue
multimedia: Remove unnecessary do_install_append from omx-user-module
multimedia: gstreamer1.0-* fix configure for out of tree build on git recipes
r-car m2: set PREFERRED_VERSION_gstreamer1.0-omx* to 1.0.% when h/w acceleration enabled
multimedia: add RPROVIDES for multimedia kernel modules
Configure linux-renesas to build uinput
Conflicts:
meta-rcar-gen2/recipes-multimedia/omx-module/omx-user-module.bb
Change-Id: Id8bf7749e75fa2cf5e418b81a33659285e46532c
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Add the multimedia acceleration kernel modules to the RPROVIDES variable of the
appropriate recipes. This fixes build errors of the following form at do_roofs time
when RPM packaging is used:
error: Can't install <foo>@MACHINE: no package provides <bar>
Thank you to Tadao Tanikawa for his work on this within AGL [1]
[1] https://gerrit.automotivelinux.org/gerrit/#/c/4061/1
|
|
The uinput module is useful for automated testing as it allows
user-space programmes to create and use virtual input devices.
An alternative way of doing this might be to add configuration using the
way recommended by
http://www.yoctoproject.org/docs/1.7.2/kernel-dev/kernel-dev.html#changing-the-configuration,
but I was unable to get that working.
Signed-off-by: Jonathan Maw <jonathan.maw@codethink.co.uk>
|
|
This change default configuration of rcar-du driver to avoid
flickering on HDMI plug. This may be related to misalignment
between ADV7511 and the SoC (tbc).
This issue was observed on two different screen models.
Change-Id: I1509e046fd7d46f6b74ea0bd96d5d41116d2f89a
Signed-off-by: Yannick GICQUEL <yannick.gicquel@iot.bzh>
|
|
This change default configuration of rcar-du driver to avoid
flickering on HDMI plug. This may be related to misalignment
between ADV7511 and the SoC (tbc).
This issue was observed on two different screen models.
Change-Id: I161b9d659c14de7fa5b0ce4b55fb5cf968c11e3f
Signed-off-by: Yannick GICQUEL <yannick.gicquel@iot.bzh>
|
|
When building meta-renesas with enabling multimedia binary packages
provided by Renesas, there are some build issue.
This should be removed once upstream is fixed.
Change-Id: Ia83cc3fa0b02ebfc660e1e2dd50f1a5c8e1fddc9
Signed-off-by: Tadao Tanikawa <tanikawa.tadao@jp.panasonic.com>
|
|
Kernel BSP v1.9.0 contained a backported ASoC and dma descriptor mode driver for AUDIO-DMAC from the upstream kernel.
This patch series migrates the R-Car M2 Porter board audio from platform data to DTS to make use of this driver and
restore audio on the board.
|
|
kernel-module-dc-linuxfb
The package provides modules that are not found when do_rootfs installs dependent
packages for certain package configurations. Add them to the RPROVIDES so they are found.
Fixes do_rootfs build errors of the form:
error: Can't install <foo>0@koelsch: no package provides <bar>
|
|
Signed-off-by: Florin Sarbu <florin.sarbu@windriver.com>
|
|
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
|