diff options
| -rwxr-xr-x | autobuild/agl/autobuild | 134 | ||||
| -rwxr-xr-x | autobuild/linux/autobuild | 119 | ||||
| -rw-r--r-- | conf.d/cmake/config.cmake | 37 |
3 files changed, 229 insertions, 61 deletions
diff --git a/autobuild/agl/autobuild b/autobuild/agl/autobuild index 883293d..16181b8 100755 --- a/autobuild/agl/autobuild +++ b/autobuild/agl/autobuild @@ -1,22 +1,128 @@ -#!/bin/bash +#!/usr/bin/make -f +# Copyright (C) 2015 - 2018 "IoT.bzh" +# Copyright (C) 2020 Konsulko Group +# Author "Romain Forlot" <romain.forlot@iot.bzh> +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. -SOURCE_DIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )/../../../" -BUILD_DIR=$( echo "$2" | cut -d'=' -f2 ) +THISFILE := $(lastword $(MAKEFILE_LIST)) +ROOT_DIR := $(abspath $(dir $(THISFILE))/../..) -# HACK: alias should be expanded in script for cmake to work properly -shopt -s expand_aliases -# HACK: source again the SDK because of the alias -source $SDKTARGETSYSROOT/../../environment-setup-* +# Build directories +# Note that the debug/test/coverage directories are defined in relation +# to the release directory (BUILD_DIR), this needs to be kept in mind +# if over-riding it and building those widget types, the specific widget +# type variable (e.g. BUILD_DIR_DEBUG) may also need to be specified +# to yield the desired output hierarchy. +BUILD_DIR = $(ROOT_DIR)/build +BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug) +BUILD_DIR_TEST = $(abspath $(BUILD_DIR)/../build-test) +BUILD_DIR_COVERAGE = $(abspath $(BUILD_DIR)/../build-coverage) -pushd $BUILD_DIR +# Output directory variable for use in pattern rules. +# This is intended for internal use only, hence the explicit override +# definition. +override OUTPUT_DIR = $(BUILD_DIR) - cmake $SOURCE_DIR - make +# Final install directory for widgets +DEST = $(OUTPUT_DIR) - if [ "$1" == "package" ]; then - make widget - cp *.wgt package/ +# Default build type for release/test builds +BUILD_TYPE = RELEASE + +.PHONY: all help update install distclean +.PHONY: clean clean-release clean-debug clean-test clean-coverage clean-all +.PHONY: configure configure-release configure-debug configure-test configure-coverage +.PHONY: build build-release build-debug build-test build-coverage build-all +.PHONY: package package-release package-debug package-test package-coverage package-all + +help: + @echo "List of targets available:" + @echo "" + @echo "- all" + @echo "- help" + @echo "- clean" + @echo "- distclean" + @echo "- configure" + @echo "- build: compilation, link and prepare files for package into a widget" + @echo "- package: output a widget file '*.wgt'" + @echo "- install: install in your $(CMAKE_INSTALL_DIR) directory" + @echo "" + @echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt" + @echo "Don't use your build dir as DEST as wgt file is generated at this location" + +all: package-all + +# Target specific variable over-rides so static pattern rules can be +# used for the various type-specific targets. + +configure-test build-test package-test clean-test: OUTPUT_DIR = $(BUILD_DIR_TEST) + +configure-coverage build-coverage package-coverage clean-coverage: OUTPUT_DIR = $(BUILD_DIR_COVERAGE) +configure-coverage build-coverage package-coverage: BUILD_TYPE = COVERAGE + +configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG) +configure-debug build-debug package-debug: BUILD_TYPE = DEBUG + +clean-release clean-test clean-debug clean-coverage: + @if [ -d $(OUTPUT_DIR) ]; then \ + $(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \ + else \ + echo Nothing to clean; \ + fi + +clean: clean-release + +clean-all: clean-release clean-test clean-debug clean-coverage + +distclean: clean-all + +configure-release configure-test configure-debug configure-coverage: + @mkdir -p $(OUTPUT_DIR) + @if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \ + (cd $(OUTPUT_DIR) && cmake -S $(ROOT_DIR) -DCMAKE_BUILD_TYPE=$(BUILD_TYPE) $(CONFIGURE_ARGS)); \ + fi + +configure: configure-release + +build-release build-debug build-coverage: build-%: configure-% + @cmake --build $(OUTPUT_DIR) $(BUILD_ARGS) --target all + +# Kept for consistency, empty to avoid building everything for test widget +build-test: configure-test + +build: build-release + +build-all: build-release build-debug build-test build-coverage + +package-release package-debug package-coverage: package-%: build-% + @cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target widget + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ + fi + +package-test: build-test + @cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target test_widget + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ fi -popd +package: package-release + +package-all: package-release package-test package-coverage package-debug + +update: configure + @cmake --build $(BUILD_DIR) --target autobuild +install: build + @cmake --build $(BUILD_DIR) $(INSTALL_ARGS) --target install diff --git a/autobuild/linux/autobuild b/autobuild/linux/autobuild index 035db15..16181b8 100755 --- a/autobuild/linux/autobuild +++ b/autobuild/linux/autobuild @@ -1,5 +1,6 @@ #!/usr/bin/make -f -# Copyright (C) 2015, 2016 "IoT.bzh" +# Copyright (C) 2015 - 2018 "IoT.bzh" +# Copyright (C) 2020 Konsulko Group # Author "Romain Forlot" <romain.forlot@iot.bzh> # # Licensed under the Apache License, Version 2.0 (the "License"); @@ -15,53 +16,113 @@ # limitations under the License. THISFILE := $(lastword $(MAKEFILE_LIST)) -BUILD_DIR := $(abspath $(dir $(THISFILE))/../../build) -DEST := ${BUILD_DIR}/target +ROOT_DIR := $(abspath $(dir $(THISFILE))/../..) -.PHONY: all clean distclean configure build package help update +# Build directories +# Note that the debug/test/coverage directories are defined in relation +# to the release directory (BUILD_DIR), this needs to be kept in mind +# if over-riding it and building those widget types, the specific widget +# type variable (e.g. BUILD_DIR_DEBUG) may also need to be specified +# to yield the desired output hierarchy. +BUILD_DIR = $(ROOT_DIR)/build +BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug) +BUILD_DIR_TEST = $(abspath $(BUILD_DIR)/../build-test) +BUILD_DIR_COVERAGE = $(abspath $(BUILD_DIR)/../build-coverage) -all: help +# Output directory variable for use in pattern rules. +# This is intended for internal use only, hence the explicit override +# definition. +override OUTPUT_DIR = $(BUILD_DIR) + +# Final install directory for widgets +DEST = $(OUTPUT_DIR) + +# Default build type for release/test builds +BUILD_TYPE = RELEASE + +.PHONY: all help update install distclean +.PHONY: clean clean-release clean-debug clean-test clean-coverage clean-all +.PHONY: configure configure-release configure-debug configure-test configure-coverage +.PHONY: build build-release build-debug build-test build-coverage build-all +.PHONY: package package-release package-debug package-test package-coverage package-all help: @echo "List of targets available:" @echo "" @echo "- all" + @echo "- help" @echo "- clean" @echo "- distclean" @echo "- configure" @echo "- build: compilation, link and prepare files for package into a widget" @echo "- package: output a widget file '*.wgt'" - @echo "- install: install in your ${CMAKE_INSTALL_DIR} directory" + @echo "- install: install in your $(CMAKE_INSTALL_DIR) directory" @echo "" - @echo "Usage: ./conf.d/autobuild/agl/autobuild package DEST=${HOME}/opt" + @echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt" @echo "Don't use your build dir as DEST as wgt file is generated at this location" -update: configure - @cmake --build ${BUILD_DIR} --target autobuild +all: package-all -clean: - @([ -d ${BUILD_DIR} ] && make -C ${BUILD_DIR} clean) || echo Nothing to clean +# Target specific variable over-rides so static pattern rules can be +# used for the various type-specific targets. -distclean: - @rm -rf ${BUILD_DIR} +configure-test build-test package-test clean-test: OUTPUT_DIR = $(BUILD_DIR_TEST) -configure: ${BUILD_DIR}/Makefile +configure-coverage build-coverage package-coverage clean-coverage: OUTPUT_DIR = $(BUILD_DIR_COVERAGE) +configure-coverage build-coverage package-coverage: BUILD_TYPE = COVERAGE -build: configure - @cmake --build ${BUILD_DIR} ${BUILD_ARGS} --target all +configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG) +configure-debug build-debug package-debug: BUILD_TYPE = DEBUG -package: build - @mkdir -p ${BUILD_DIR}/$@/bin - @mkdir -p ${BUILD_DIR}/$@/etc - @mkdir -p ${BUILD_DIR}/$@/lib - @mkdir -p ${BUILD_DIR}/$@/htdocs - @mkdir -p ${BUILD_DIR}/$@/data - @cmake --build ${BUILD_DIR} --target widget - @mkdir -p ${DEST} && cp ${BUILD_DIR}/*wgt ${DEST} +clean-release clean-test clean-debug clean-coverage: + @if [ -d $(OUTPUT_DIR) ]; then \ + $(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \ + else \ + echo Nothing to clean; \ + fi -install: build - @cmake --build ${BUILD_DIR} --target install +clean: clean-release + +clean-all: clean-release clean-test clean-debug clean-coverage + +distclean: clean-all + +configure-release configure-test configure-debug configure-coverage: + @mkdir -p $(OUTPUT_DIR) + @if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \ + (cd $(OUTPUT_DIR) && cmake -S $(ROOT_DIR) -DCMAKE_BUILD_TYPE=$(BUILD_TYPE) $(CONFIGURE_ARGS)); \ + fi + +configure: configure-release + +build-release build-debug build-coverage: build-%: configure-% + @cmake --build $(OUTPUT_DIR) $(BUILD_ARGS) --target all -${BUILD_DIR}/Makefile: - @[ -d ${BUILD_DIR} ] || mkdir -p ${BUILD_DIR} - @[ -f ${BUILD_DIR}/Makefile ] || (cd ${BUILD_DIR} && cmake ${CONFIGURE_ARGS} ..) +# Kept for consistency, empty to avoid building everything for test widget +build-test: configure-test + +build: build-release + +build-all: build-release build-debug build-test build-coverage + +package-release package-debug package-coverage: package-%: build-% + @cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target widget + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ + fi + +package-test: build-test + @cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target test_widget + @if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \ + mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \ + fi + +package: package-release + +package-all: package-release package-test package-coverage package-debug + +update: configure + @cmake --build $(BUILD_DIR) --target autobuild + +install: build + @cmake --build $(BUILD_DIR) $(INSTALL_ARGS) --target install diff --git a/conf.d/cmake/config.cmake b/conf.d/cmake/config.cmake index 2e3821e..cde656b 100644 --- a/conf.d/cmake/config.cmake +++ b/conf.d/cmake/config.cmake @@ -1,7 +1,7 @@ ########################################################################### -# Copyright 2015, 2016, 2017 IoT.bzh -# Copyright 2018 Konsulko Group -# Copyright 2019 FUJITSU LIMITED +# Copyright 2015-2018 IoT.bzh +# Copyright 2019 Konsulko Group +# Copyright 2019-2021 FUJITSU LIMITED # # author: Fulup Ar Foll <fulup@iot.bzh> # cluster-gauges: Scott Murray <scott.murray@konsulko.com> @@ -32,9 +32,9 @@ set(PROJECT_AUTHOR_MAIL "ouyangj.fnst@cn.fujitsu.com") set(PROJECT_LICENSE "APL2.0") set(PROJECT_LANGUAGES "CXX") -# Where are stored default templates files from submodule or subtree app-templates in your project tree +# Where are stored the project configuration files # relative to the root project directory -set(PROJECT_APP_TEMPLATES_DIR "conf.d/app-templates") +set(PROJECT_CMAKE_CONF_DIR "conf.d") # Where are stored your external libraries for your project. This is 3rd party library that you don't maintain # but used and must be built and linked. @@ -45,10 +45,8 @@ set(PROJECT_APP_TEMPLATES_DIR "conf.d/app-templates") # Compilation Mode (DEBUG, RELEASE) # ---------------------------------- -#set(BUILD_TYPE "DEBUG") -set(BUILD_TYPE "RELEASE") - -#set(USE_EFENCE 1) +#set(CMAKE_BUILD_TYPE "DEBUG") +set(USE_EFENCE 1) # Kernel selection if needed. You can choose between a # mandatory version to impose a minimal version. @@ -75,14 +73,10 @@ set (PKG_REQUIRED_LIST afb-daemon ) -# You can also consider to include libsystemd -# ----------------------------------- -#list (APPEND PKG_REQUIRED_LIST libsystemd>=222) - # Prefix path where will be installed the files # Default: /usr/local (need root permission to write in) # ------------------------------------------------------ -#set(INSTALL_PREFIX /opt/AGL CACHE PATH "INSTALL PREFIX PATH") +#set(CMAKE_INSTALL_PREFIX $ENV{HOME}/opt) # Customize link option # ----------------------------- @@ -118,7 +112,7 @@ set (PKG_REQUIRED_LIST #set(DEBUG_COMPILE_OPTIONS # -g # -ggdb -# -D_FORTIFY_SOURCE=2 +# -Wp,-U_FORTIFY_SOURCE # CACHE STRING "Compilation flags for DEBUG build type.") #set(CCOV_COMPILE_OPTIONS # -g @@ -128,9 +122,13 @@ set (PKG_REQUIRED_LIST #set(RELEASE_COMPILE_OPTIONS # -g # -O2 -# -D_FORTIFY_SOURCE=2 # CACHE STRING "Compilation flags for RELEASE build type.") +# (BUG!!!) as PKG_CONFIG_PATH does not work [should be an env variable] +# --------------------------------------------------------------------- +set(CMAKE_PREFIX_PATH ${CMAKE_INSTALL_PREFIX}/lib64/pkgconfig ${CMAKE_INSTALL_PREFIX}/lib/pkgconfig) +set(LD_LIBRARY_PATH ${CMAKE_INSTALL_PREFIX}/lib64 ${CMAKE_INSTALL_PREFIX}/lib) + # Optional location for config.xml.in # ----------------------------------- #set(WIDGET_ICON "\"conf.d/wgt/${PROJECT_ICON}\"" CACHE PATH "Path to the widget icon") @@ -188,7 +186,7 @@ set(AFB_REMPORT "1234" CACHE PATH "Default binder listening port") # Print a helper message when every thing is finished # ---------------------------------------------------- -#set(CLOSING_MESSAGE "Typical binding launch: cd ${CMAKE_BINARY_DIR}/package && afb-daemon --port=${AFB_REMPORT} --workdir=. --ldpaths=lib --roothttp=htdocs --token=\"${AFB_TOKEN}\" --tracereq=common --verbose") +#set(CLOSING_MESSAGE "Typical binding launch: afb-daemon --port=${AFB_REMPORT} --workdir=${CMAKE_BINARY_DIR}/package --ldpaths=lib --roothttp=htdocs --token=\"${AFB_TOKEN}\" --tracereq=common --verbose") set(PACKAGE_MESSAGE "Install widget file using in the target : afm-util install ${PROJECT_NAME}.wgt") # Optional schema validator about now only XML, LUA and JSON @@ -200,5 +198,8 @@ set(PACKAGE_MESSAGE "Install widget file using in the target : afm-util install # This include is mandatory and MUST happens at the end # of this file, else you expose you to unexpected behavior +# +# This CMake module could be found at the following url: +# https://gerrit.automotivelinux.org/gerrit/#/admin/projects/src/cmake-apps-module # ----------------------------------------------------------- -include(${PROJECT_APP_TEMPLATES_DIR}/cmake/common.cmake) +include(CMakeAfbTemplates) |