Migrate qt cluster-receiver to its own repositoryjellyfish_9.99.2jellyfish/9.99.29.99.2

This has the run-by-default already removed.

Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Change-Id: Id0a102812d588777ff8641a6961532afd26cb440

2 files changed, 256 insertions, 0 deletions

diff --git a/autobuild/agl/autobuild b/autobuild/agl/autobuild
new file mode 100755
index 0000000..16181b8
--- /dev/null
+++ b/autobuild/agl/autobuild
@@ -0,0 +1,128 @@
+#!/usr/bin/make -f
+# Copyright (C) 2015 - 2018 "IoT.bzh"
+# Copyright (C) 2020 Konsulko Group
+# Author "Romain Forlot" <romain.forlot@iot.bzh>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#	 http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+THISFILE  := $(lastword $(MAKEFILE_LIST))
+ROOT_DIR := $(abspath $(dir $(THISFILE))/../..)
+
+# Build directories
+# Note that the debug/test/coverage directories are defined in relation
+# to the release directory (BUILD_DIR), this needs to be kept in mind
+# if over-riding it and building those widget types, the specific widget
+# type variable (e.g. BUILD_DIR_DEBUG) may also need to be specified
+# to yield the desired output hierarchy.
+BUILD_DIR = $(ROOT_DIR)/build
+BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug)
+BUILD_DIR_TEST = $(abspath $(BUILD_DIR)/../build-test)
+BUILD_DIR_COVERAGE = $(abspath $(BUILD_DIR)/../build-coverage)
+
+# Output directory variable for use in pattern rules.
+# This is intended for internal use only, hence the explicit override
+# definition.
+override OUTPUT_DIR = $(BUILD_DIR)
+
+# Final install directory for widgets
+DEST = $(OUTPUT_DIR)
+
+# Default build type for release/test builds
+BUILD_TYPE = RELEASE
+
+.PHONY: all help update install distclean
+.PHONY: clean clean-release clean-debug clean-test clean-coverage clean-all
+.PHONY: configure configure-release configure-debug configure-test configure-coverage
+.PHONY: build build-release build-debug build-test build-coverage build-all
+.PHONY: package package-release package-debug package-test package-coverage package-all
+
+help:
+	@echo "List of targets available:"
+	@echo ""
+	@echo "- all"
+	@echo "- help"
+	@echo "- clean"
+	@echo "- distclean"
+	@echo "- configure"
+	@echo "- build: compilation, link and prepare files for package into a widget"
+	@echo "- package: output a widget file '*.wgt'"
+	@echo "- install: install in your $(CMAKE_INSTALL_DIR) directory"
+	@echo ""
+	@echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt"
+	@echo "Don't use your build dir as DEST as wgt file is generated at this location"
+
+all: package-all
+
+# Target specific variable over-rides so static pattern rules can be
+# used for the various type-specific targets.
+
+configure-test build-test package-test clean-test: OUTPUT_DIR = $(BUILD_DIR_TEST)
+
+configure-coverage build-coverage package-coverage clean-coverage: OUTPUT_DIR = $(BUILD_DIR_COVERAGE)
+configure-coverage build-coverage package-coverage: BUILD_TYPE = COVERAGE
+
+configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG)
+configure-debug build-debug package-debug: BUILD_TYPE = DEBUG
+
+clean-release clean-test clean-debug clean-coverage:
+	@if [ -d $(OUTPUT_DIR) ]; then \
+		$(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \
+	else \
+		echo Nothing to clean; \
+	fi
+
+clean: clean-release
+
+clean-all: clean-release clean-test clean-debug clean-coverage
+
+distclean: clean-all
+
+configure-release configure-test configure-debug configure-coverage:
+	@mkdir -p $(OUTPUT_DIR)
+	@if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \
+		(cd $(OUTPUT_DIR) && cmake -S $(ROOT_DIR) -DCMAKE_BUILD_TYPE=$(BUILD_TYPE) $(CONFIGURE_ARGS)); \
+	fi
+
+configure: configure-release
+
+build-release build-debug build-coverage: build-%: configure-%
+	@cmake --build $(OUTPUT_DIR) $(BUILD_ARGS) --target all
+
+# Kept for consistency, empty to avoid building everything for test widget
+build-test: configure-test
+
+build: build-release
+
+build-all: build-release build-debug build-test build-coverage
+
+package-release package-debug package-coverage: package-%: build-%
+	@cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target widget
+	@if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \
+		mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \
+	fi
+
+package-test: build-test
+	@cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target test_widget
+	@if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \
+		mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \
+	fi
+
+package: package-release
+
+package-all: package-release package-test package-coverage package-debug
+
+update: configure
+	@cmake --build $(BUILD_DIR) --target autobuild
+
+install: build
+	@cmake --build $(BUILD_DIR) $(INSTALL_ARGS) --target install
diff --git a/autobuild/linux/autobuild b/autobuild/linux/autobuild
new file mode 100755
index 0000000..16181b8
--- /dev/null
+++ b/autobuild/linux/autobuild
@@ -0,0 +1,128 @@
+#!/usr/bin/make -f
+# Copyright (C) 2015 - 2018 "IoT.bzh"
+# Copyright (C) 2020 Konsulko Group
+# Author "Romain Forlot" <romain.forlot@iot.bzh>
+#
+# Licensed under the Apache License, Version 2.0 (the "License");
+# you may not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+#	 http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an "AS IS" BASIS,
+# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+
+THISFILE  := $(lastword $(MAKEFILE_LIST))
+ROOT_DIR := $(abspath $(dir $(THISFILE))/../..)
+
+# Build directories
+# Note that the debug/test/coverage directories are defined in relation
+# to the release directory (BUILD_DIR), this needs to be kept in mind
+# if over-riding it and building those widget types, the specific widget
+# type variable (e.g. BUILD_DIR_DEBUG) may also need to be specified
+# to yield the desired output hierarchy.
+BUILD_DIR = $(ROOT_DIR)/build
+BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug)
+BUILD_DIR_TEST = $(abspath $(BUILD_DIR)/../build-test)
+BUILD_DIR_COVERAGE = $(abspath $(BUILD_DIR)/../build-coverage)
+
+# Output directory variable for use in pattern rules.
+# This is intended for internal use only, hence the explicit override
+# definition.
+override OUTPUT_DIR = $(BUILD_DIR)
+
+# Final install directory for widgets
+DEST = $(OUTPUT_DIR)
+
+# Default build type for release/test builds
+BUILD_TYPE = RELEASE
+
+.PHONY: all help update install distclean
+.PHONY: clean clean-release clean-debug clean-test clean-coverage clean-all
+.PHONY: configure configure-release configure-debug configure-test configure-coverage
+.PHONY: build build-release build-debug build-test build-coverage build-all
+.PHONY: package package-release package-debug package-test package-coverage package-all
+
+help:
+	@echo "List of targets available:"
+	@echo ""
+	@echo "- all"
+	@echo "- help"
+	@echo "- clean"
+	@echo "- distclean"
+	@echo "- configure"
+	@echo "- build: compilation, link and prepare files for package into a widget"
+	@echo "- package: output a widget file '*.wgt'"
+	@echo "- install: install in your $(CMAKE_INSTALL_DIR) directory"
+	@echo ""
+	@echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt"
+	@echo "Don't use your build dir as DEST as wgt file is generated at this location"
+
+all: package-all
+
+# Target specific variable over-rides so static pattern rules can be
+# used for the various type-specific targets.
+
+configure-test build-test package-test clean-test: OUTPUT_DIR = $(BUILD_DIR_TEST)
+
+configure-coverage build-coverage package-coverage clean-coverage: OUTPUT_DIR = $(BUILD_DIR_COVERAGE)
+configure-coverage build-coverage package-coverage: BUILD_TYPE = COVERAGE
+
+configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG)
+configure-debug build-debug package-debug: BUILD_TYPE = DEBUG
+
+clean-release clean-test clean-debug clean-coverage:
+	@if [ -d $(OUTPUT_DIR) ]; then \
+		$(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \
+	else \
+		echo Nothing to clean; \
+	fi
+
+clean: clean-release
+
+clean-all: clean-release clean-test clean-debug clean-coverage
+
+distclean: clean-all
+
+configure-release configure-test configure-debug configure-coverage:
+	@mkdir -p $(OUTPUT_DIR)
+	@if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \
+		(cd $(OUTPUT_DIR) && cmake -S $(ROOT_DIR) -DCMAKE_BUILD_TYPE=$(BUILD_TYPE) $(CONFIGURE_ARGS)); \
+	fi
+
+configure: configure-release
+
+build-release build-debug build-coverage: build-%: configure-%
+	@cmake --build $(OUTPUT_DIR) $(BUILD_ARGS) --target all
+
+# Kept for consistency, empty to avoid building everything for test widget
+build-test: configure-test
+
+build: build-release
+
+build-all: build-release build-debug build-test build-coverage
+
+package-release package-debug package-coverage: package-%: build-%
+	@cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target widget
+	@if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \
+		mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \
+	fi
+
+package-test: build-test
+	@cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target test_widget
+	@if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \
+		mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \
+	fi
+
+package: package-release
+
+package-all: package-release package-test package-coverage package-debug
+
+update: configure
+	@cmake --build $(BUILD_DIR) --target autobuild
+
+install: build
+	@cmake --build $(BUILD_DIR) $(INSTALL_ARGS) --target install