Code Reorganisation preparing transfer to gerrit

1 files changed, 0 insertions, 162 deletions

diff --git a/conf.d/app-templates/cmake/cmake.d/04-extra_targets.cmake b/conf.d/app-templates/cmake/cmake.d/04-extra_targets.cmake
deleted file mode 100644
index d54e128..0000000
--- a/conf.d/app-templates/cmake/cmake.d/04-extra_targets.cmake
+++ /dev/null
@@ -1,162 +0,0 @@
-###########################################################################
-# Copyright 2015, 2016, 2017 IoT.bzh
-#
-# author: Fulup Ar Foll <fulup@iot.bzh>
-# contrib: Romain Forlot <romain.forlot@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#     http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-###########################################################################
-
-
-#--------------------------------------------------------------------------
-#  WARNING:
-#     Do not change this cmake template
-#     Customise your preferences in "./conf.d/cmake/config.cmake"
-#--------------------------------------------------------------------------
-
-# Add a dummy target to enable global dependency order
-# -----------------------------------------------------
-if(EXTRA_DEPENDENCIES_ORDER)
-	set(DEPENDENCIES_TARGET ${PROJECT_NAME}_extra_dependencies)
-	add_custom_target(${DEPENDENCIES_TARGET} ALL
-		DEPENDS ${EXTRA_DEPENDENCY_ORDER}
-	)
-endif()
-
-# ----------------------------------------------------------------------------
-#                                Archive target
-# ----------------------------------------------------------------------------
-add_custom_command(OUTPUT  ${ARCHIVE_OUTPUT}
-	DEPENDS ${PROJECT_TARGETS}
-	#Create git archive of the main project
-	COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git archive --format=tar --prefix=${NPKG_PROJECT_NAME}-${PROJECT_VERSION}/ HEAD -o ${ARCHIVE_OUTPUT_ARCHIVE}
-	#Create tmp git archive for each submodule
-	COMMAND cd ${CMAKE_CURRENT_SOURCE_DIR}\; git --git-dir=${CMAKE_CURRENT_SOURCE_DIR}/.git submodule foreach --recursive ${CMD_ARCHIVE_SUBMODULE}
-	#Concatenate main archive and tmp submodule archive
-	COMMAND  for SUBTAR in ${TMP_ARCHIVE_SUBMODULE}-*.tar\; do tar --concatenate --file=${ARCHIVE_OUTPUT_ARCHIVE} $$SUBTAR\;done
-	#Remove tmp submodule archive
-	COMMAND rm -rf ${TMP_ARCHIVE_SUBMODULE}-*.tar
-	#Compress main archive
-	COMMAND gzip --force --verbose ${ARCHIVE_OUTPUT_ARCHIVE}
-)
-add_custom_target(archive DEPENDS ${ARCHIVE_OUTPUT})
-
-# ----------------------------------------------------------------------------
-#                                Packaging target
-# ----------------------------------------------------------------------------
-#Format Build require package
-foreach (PKG_CONFIG ${PKG_REQUIRED_LIST})
-	#Unset TMP variable
-	unset(XPREFIX)
-	unset(XRULE)
-	unset(RPM_EXTRA_DEP)
-	unset(DEB_EXTRA_DEP)
-	#For deb package,add EOL format only for a new line
-	if(DEB_PKG_DEPS)
-		set(DEB_PKG_DEPS "${DEB_PKG_DEPS},\n")
-	endif()
-	#Get pkg-config rule on version
-	string(REGEX REPLACE "[<>]?=.*$" "" XPREFIX ${PKG_CONFIG})
-	string(REGEX MATCH "[<>]?="  XRULE ${PKG_CONFIG})
-	#Only if pkg-config has rule on version
-	if(XRULE)
-		string(REGEX REPLACE ".*[<>]?=" "" XVERS ${PKG_CONFIG})
-		set(RPM_EXTRA_DEP " ${XRULE} ${XVERS}")
-		set(DEB_EXTRA_DEP " (${XRULE} ${XVERS})")
-	endif()
-	# Format for rpm package
-	set(RPM_PKG_DEPS "${RPM_PKG_DEPS}BuildRequires: pkgconfig(${XPREFIX})${RPM_EXTRA_DEP}\n")
-
-	# Format for deb package
-	# Because the tool "dpkg" is used on the packages db to find the
-	# package providing the pkg-cong file ${XPREFIX}.pc, we need
-	# to test the OS release package type
-	# Only doable within a native environment not under SDK
-	if( OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
-		execute_process(
-			COMMAND pkg-config --print-provides ${XPREFIX}
-					OUTPUT_VARIABLE TMP_PKG_BIN
-		)
-		if(TMP_PKG_BIN)
-			string(REGEX REPLACE " *=.*$" "" PKG_BIN ${TMP_PKG_BIN})
-			set(DEB_PKG_DEPS "${DEB_PKG_DEPS} ${PKG_BIN} ${DEB_EXTRA_DEP}")
-		else()
-			message(FATAL_ERROR "-- ${Red}${XPREFIX} development files not installed. Abort.${ColourReset}")
-		endif()
-	endif()
-endforeach()
-
-if(NOT EXISTS ${TEMPLATE_DIR}/rpm-config.spec.in)
-	MESSAGE(FATAL_ERROR "${Red}Missing mandatory files: you need rpm-config.spec.in in ${TEMPLATE_DIR} folder.${ColourReset}")
-endif()
-
-# Because the tool "dpkg" is used on the packages db to find the
-# package providing the pkg-cong file ${XPREFIX}.pc, we need
-# to test the OS release package type
-# Only doable within a native environment not under SDK
-if(OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
-	add_custom_target(packaging_deb DEPENDS ${TEMPLATE_DIR}/debian.compat.in
-				${TEMPLATE_DIR}/debian.changelog.in
-				${TEMPLATE_DIR}/deb-config.dsc.in
-				${TEMPLATE_DIR}/deb-config.install.in
-				${TEMPLATE_DIR}/debian.control.in
-				${TEMPLATE_DIR}/debian.rules.in
-		COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.compat.in		-DOUTFILE=${PACKAGING_DEB_OUTPUT_COMPAT}	-DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}	-P	${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-		COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.changelog.in	-DOUTFILE=${PACKAGING_DEB_OUTPUT_CHANGELOG}	-DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}	-P	${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-		COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/deb-config.dsc.in		-DOUTFILE=${PACKAGING_DEB_OUTPUT_DSC}		-DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}	-P	${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-		COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/deb-config.install.in	-DOUTFILE=${PACKAGING_DEB_OUTPUT_INSTALL}	-DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}	-P	${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-		COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.control.in		-DOUTFILE=${PACKAGING_DEB_OUTPUT_CONTROL}	-DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}	-P	${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-		COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/debian.rules.in		-DOUTFILE=${PACKAGING_DEB_OUTPUT_RULES}		-DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR}	-P	${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-	)
-endif()
-
-add_custom_target(packaging)
-set(PACKAGING_SPEC_OUTPUT ${PROJECT_PKG_ENTRY_POINT}/${NPKG_PROJECT_NAME}.spec)
-add_custom_target(packaging_rpm DEPENDS ${TEMPLATE_DIR}/rpm-config.spec.in
-	COMMAND ${CMAKE_COMMAND} -DINFILE=${TEMPLATE_DIR}/rpm-config.spec.in -DOUTFILE=${PACKAGING_SPEC_OUTPUT} -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-)
-add_dependencies(packaging packaging_rpm)
-if(TARGET packaging_wgt)
-	add_dependencies(packaging packaging_wgt)
-endif()
-if(OSRELEASE MATCHES "debian" AND NOT DEFINED ENV{SDKTARGETSYSROOT} AND NOT DEFINED CMAKE_TOOLCHAIN_FILE)
-	# Target to add dependencies indirectly to "packaging" target.
-	add_dependencies(packaging packaging_deb)
-endif()
-
-#Generate a cmake cache file usable by cmake script.
-set(CacheForScript ${CMAKE_BINARY_DIR}/CMakeCacheForScript.cmake)
-#Create a tmp cmake file.
-file(WRITE ${CacheForScript} "")
-
-get_cmake_property(Vars VARIABLES)
-foreach(Var ${Vars})
-	if(${Var})
-		#Replace unwanted char.
-		string(REPLACE "\\" "\\\\" VALUE ${${Var}})
-		string(REPLACE "\n" "\\n" VALUE ${VALUE})
-		string(REPLACE "\r" "\\n" VALUE ${VALUE})
-		string(REPLACE "\"" "\\\"" VALUE ${VALUE})
-	endif()
-	file(APPEND ${CacheForScript} "set(${Var} \"${VALUE}\")\n")
-endforeach()
-
-# ----------------------------------------------------------------------------
-#                                Autobuild target
-# ----------------------------------------------------------------------------
-
-add_custom_target(autobuild ALL DEPENDS ${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/agl/autobuild.in
-	${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/linux/autobuild.in
-	COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_AGL_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-	COMMAND ${CMAKE_COMMAND} -DINFILE=${CMAKE_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/template.d/autobuild/agl/autobuild.in -DOUTFILE=${PROJECT_TEMPLATE_LINUX_AUTOBUILD_DIR}/autobuild -DPROJECT_BINARY_DIR=${CMAKE_CURRENT_BINARY_DIR} -P ${CMAKE_CURRENT_SOURCE_DIR}/${PROJECT_APP_TEMPLATES_DIR}/cmake/configure_file.cmake
-)