Repurpose into VIS clientneedlefish_13.93.0needlefish/13.93.013.93.0

Repurpose repository for a spiritual successor of the previous
binding.  The replacement is a daemon that demonstrates servicing
the volume actuator from the VSS schema via VIS signals from
KUKSA.val.  Currently the connection to KUKSA.val is websocket based
using the boost::asio framework, but the plan is to migrate to gRPC
as that becomes more robust in KUKSA.val.  As well, this new code
will serve as the base for implementing a gRPC API to expose the full
set of WirePlumber controls as was done with the previous binding.

Notable changes:
- New code is completely C++, partly to leverage using Boost, but
  also to futureproof future work with gRPC.  The WirePlumber
  interfacing code that has been kept from the old binding is
  still C for now, converting it to C++ is a planned future
  rework.
- Switch from CMake to meson for ease of development and some
  degree of futureproofing.
- Use with systemd is assumed; behavior follows the systemd
  daemon guidelines barring the use of journald logging prefixes,
  which may be addressed with future work.  A systemd unit is
  also installed as part of the build.
- SPDX license headers using SPDX "short identifiers" are used in
  source files rather than the full copyright headers used in the
  previous codebase.  This follows the direction that projects such
  as the Linux kernel are going in.

Bug-AGL: SPEC-4409

Signed-off-by: Scott Murray <scott.murray@konsulko.com>
Change-Id: Ibb7091c4354432bb094147d1419ab475486a4abc
(cherry picked from commit 298bbf445a731b85cb8d5d19a3b595e8870d8701)

1 files changed, 0 insertions, 128 deletions

diff --git a/autobuild/agl/autobuild b/autobuild/agl/autobuild
deleted file mode 100755
index 16181b8..0000000
--- a/autobuild/agl/autobuild
+++ /dev/null
@@ -1,128 +0,0 @@
-#!/usr/bin/make -f
-# Copyright (C) 2015 - 2018 "IoT.bzh"
-# Copyright (C) 2020 Konsulko Group
-# Author "Romain Forlot" <romain.forlot@iot.bzh>
-#
-# Licensed under the Apache License, Version 2.0 (the "License");
-# you may not use this file except in compliance with the License.
-# You may obtain a copy of the License at
-#
-#	 http://www.apache.org/licenses/LICENSE-2.0
-#
-# Unless required by applicable law or agreed to in writing, software
-# distributed under the License is distributed on an "AS IS" BASIS,
-# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-# See the License for the specific language governing permissions and
-# limitations under the License.
-
-THISFILE  := $(lastword $(MAKEFILE_LIST))
-ROOT_DIR := $(abspath $(dir $(THISFILE))/../..)
-
-# Build directories
-# Note that the debug/test/coverage directories are defined in relation
-# to the release directory (BUILD_DIR), this needs to be kept in mind
-# if over-riding it and building those widget types, the specific widget
-# type variable (e.g. BUILD_DIR_DEBUG) may also need to be specified
-# to yield the desired output hierarchy.
-BUILD_DIR = $(ROOT_DIR)/build
-BUILD_DIR_DEBUG = $(abspath $(BUILD_DIR)/../build-debug)
-BUILD_DIR_TEST = $(abspath $(BUILD_DIR)/../build-test)
-BUILD_DIR_COVERAGE = $(abspath $(BUILD_DIR)/../build-coverage)
-
-# Output directory variable for use in pattern rules.
-# This is intended for internal use only, hence the explicit override
-# definition.
-override OUTPUT_DIR = $(BUILD_DIR)
-
-# Final install directory for widgets
-DEST = $(OUTPUT_DIR)
-
-# Default build type for release/test builds
-BUILD_TYPE = RELEASE
-
-.PHONY: all help update install distclean
-.PHONY: clean clean-release clean-debug clean-test clean-coverage clean-all
-.PHONY: configure configure-release configure-debug configure-test configure-coverage
-.PHONY: build build-release build-debug build-test build-coverage build-all
-.PHONY: package package-release package-debug package-test package-coverage package-all
-
-help:
-	@echo "List of targets available:"
-	@echo ""
-	@echo "- all"
-	@echo "- help"
-	@echo "- clean"
-	@echo "- distclean"
-	@echo "- configure"
-	@echo "- build: compilation, link and prepare files for package into a widget"
-	@echo "- package: output a widget file '*.wgt'"
-	@echo "- install: install in your $(CMAKE_INSTALL_DIR) directory"
-	@echo ""
-	@echo "Usage: ./autobuild/agl/autobuild package DEST=${HOME}/opt"
-	@echo "Don't use your build dir as DEST as wgt file is generated at this location"
-
-all: package-all
-
-# Target specific variable over-rides so static pattern rules can be
-# used for the various type-specific targets.
-
-configure-test build-test package-test clean-test: OUTPUT_DIR = $(BUILD_DIR_TEST)
-
-configure-coverage build-coverage package-coverage clean-coverage: OUTPUT_DIR = $(BUILD_DIR_COVERAGE)
-configure-coverage build-coverage package-coverage: BUILD_TYPE = COVERAGE
-
-configure-debug build-debug package-debug clean-debug: OUTPUT_DIR = $(BUILD_DIR_DEBUG)
-configure-debug build-debug package-debug: BUILD_TYPE = DEBUG
-
-clean-release clean-test clean-debug clean-coverage:
-	@if [ -d $(OUTPUT_DIR) ]; then \
-		$(MAKE) -C $(OUTPUT_DIR) $(CLEAN_ARGS) clean; \
-	else \
-		echo Nothing to clean; \
-	fi
-
-clean: clean-release
-
-clean-all: clean-release clean-test clean-debug clean-coverage
-
-distclean: clean-all
-
-configure-release configure-test configure-debug configure-coverage:
-	@mkdir -p $(OUTPUT_DIR)
-	@if [ ! -f $(OUTPUT_DIR)/Makefile ]; then \
-		(cd $(OUTPUT_DIR) && cmake -S $(ROOT_DIR) -DCMAKE_BUILD_TYPE=$(BUILD_TYPE) $(CONFIGURE_ARGS)); \
-	fi
-
-configure: configure-release
-
-build-release build-debug build-coverage: build-%: configure-%
-	@cmake --build $(OUTPUT_DIR) $(BUILD_ARGS) --target all
-
-# Kept for consistency, empty to avoid building everything for test widget
-build-test: configure-test
-
-build: build-release
-
-build-all: build-release build-debug build-test build-coverage
-
-package-release package-debug package-coverage: package-%: build-%
-	@cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target widget
-	@if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \
-		mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \
-	fi
-
-package-test: build-test
-	@cmake --build $(OUTPUT_DIR) $(PACKAGE_ARGS) --target test_widget
-	@if [ "$(abspath $(DEST))" != "$(abspath $(OUTPUT_DIR))" ]; then \
-		mkdir -p $(DEST) && cp $(OUTPUT_DIR)/*.wgt $(DEST); \
-	fi
-
-package: package-release
-
-package-all: package-release package-test package-coverage package-debug
-
-update: configure
-	@cmake --build $(BUILD_DIR) --target autobuild
-
-install: build
-	@cmake --build $(BUILD_DIR) $(INSTALL_ARGS) --target install