Added external libraries from openXC CMake files.

Now libraries are cleanly included and built.

Change-Id: Iaa85639578b55b2da8357bc438426403e2cca8de
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

29 files changed, 0 insertions, 1316 deletions

diff --git a/CAN-binder/libs/nanopb/examples/cmake_simple/CMakeLists.txt b/CAN-binder/libs/nanopb/examples/cmake_simple/CMakeLists.txt
deleted file mode 100644
index e5f33a02..00000000
--- a/CAN-binder/libs/nanopb/examples/cmake_simple/CMakeLists.txt
+++ /dev/null
@@ -1,16 +0,0 @@
-cmake_minimum_required(VERSION 2.8)
-project(NANOPB_CMAKE_SIMPLE C)
-
-set(CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR}/../../extra)
-find_package(Nanopb REQUIRED)
-include_directories(${NANOPB_INCLUDE_DIRS})
-
-nanopb_generate_cpp(PROTO_SRCS PROTO_HDRS simple.proto)
-include_directories(${CMAKE_CURRENT_BINARY_DIR})
-#add_custom_target(generate_proto_sources DEPENDS ${PROTO_SRCS} ${PROTO_HDRS})
-set_source_files_properties(${PROTO_SRCS} ${PROTO_HDRS}
-    PROPERTIES GENERATED TRUE)
-
-set(CMAKE_C_FLAGS "${CMAKE_C_FLAGS} -Wall -Werror -g -O0")
-
-add_executable(simple simple.c ${PROTO_SRCS} ${PROTO_HDRS})
diff --git a/CAN-binder/libs/nanopb/examples/cmake_simple/README.txt b/CAN-binder/libs/nanopb/examples/cmake_simple/README.txt
deleted file mode 100644
index aa0f3f3a..00000000
--- a/CAN-binder/libs/nanopb/examples/cmake_simple/README.txt
+++ /dev/null
@@ -1,18 +0,0 @@
-Nanopb example "simple" using CMake
-=======================
-
-This example is the same as the simple nanopb example but built using CMake.
-
-Example usage
--------------
-
-On Linux, create a build directory and then call cmake:
-
-    nanopb/examples/cmake_simple$ mkdir build
-    nanopb/examples/cmake_simple$ cd build/
-    nanopb/examples/cmake_simple/build$ cmake ..
-    nanopb/examples/cmake_simple/build$ make
-
-After that, you can run it with the command: ./simple
-
-On other platforms supported by CMake, refer to CMake instructions.
diff --git a/CAN-binder/libs/nanopb/examples/cmake_simple/simple.c b/CAN-binder/libs/nanopb/examples/cmake_simple/simple.c
deleted file mode 100644
index 1f6b1373..00000000
--- a/CAN-binder/libs/nanopb/examples/cmake_simple/simple.c
+++ /dev/null
@@ -1,71 +0,0 @@
-#include <stdio.h>
-#include <pb_encode.h>
-#include <pb_decode.h>
-#include "simple.pb.h"
-
-int main()
-{
-    /* This is the buffer where we will store our message. */
-    uint8_t buffer[128];
-    size_t message_length;
-    bool status;
-    
-    /* Encode our message */
-    {
-        /* Allocate space on the stack to store the message data.
-         *
-         * Nanopb generates simple struct definitions for all the messages.
-         * - check out the contents of simple.pb.h!
-         * It is a good idea to always initialize your structures
-         * so that you do not have garbage data from RAM in there.
-         */
-        SimpleMessage message = SimpleMessage_init_zero;
-        
-        /* Create a stream that will write to our buffer. */
-        pb_ostream_t stream = pb_ostream_from_buffer(buffer, sizeof(buffer));
-        
-        /* Fill in the lucky number */
-        message.lucky_number = 13;
-        
-        /* Now we are ready to encode the message! */
-        status = pb_encode(&stream, SimpleMessage_fields, &message);
-        message_length = stream.bytes_written;
-        
-        /* Then just check for any errors.. */
-        if (!status)
-        {
-            printf("Encoding failed: %s\n", PB_GET_ERROR(&stream));
-            return 1;
-        }
-    }
-    
-    /* Now we could transmit the message over network, store it in a file or
-     * wrap it to a pigeon's leg.
-     */
-
-    /* But because we are lazy, we will just decode it immediately. */
-    
-    {
-        /* Allocate space for the decoded message. */
-        SimpleMessage message = SimpleMessage_init_zero;
-        
-        /* Create a stream that reads from the buffer. */
-        pb_istream_t stream = pb_istream_from_buffer(buffer, message_length);
-        
-        /* Now we are ready to decode the message. */
-        status = pb_decode(&stream, SimpleMessage_fields, &message);
-        
-        /* Check for errors... */
-        if (!status)
-        {
-            printf("Decoding failed: %s\n", PB_GET_ERROR(&stream));
-            return 1;
-        }
-        
-        /* Print the data contained in the message. */
-        printf("Your lucky number was %d!\n", message.lucky_number);
-    }
-    
-    return 0;
-}
-
diff --git a/CAN-binder/libs/nanopb/examples/cmake_simple/simple.proto b/CAN-binder/libs/nanopb/examples/cmake_simple/simple.proto
deleted file mode 100644
index 5c73a3b2..00000000
--- a/CAN-binder/libs/nanopb/examples/cmake_simple/simple.proto
+++ /dev/null
@@ -1,9 +0,0 @@
-// A very simple protocol definition, consisting of only
-// one message.
-
-syntax = "proto2";
-
-message SimpleMessage {
-    required int32 lucky_number = 1;
-}
-
diff --git a/CAN-binder/libs/nanopb/examples/network_server/Makefile b/CAN-binder/libs/nanopb/examples/network_server/Makefile
deleted file mode 100644
index 2c7639a1..00000000
--- a/CAN-binder/libs/nanopb/examples/network_server/Makefile
+++ /dev/null
@@ -1,17 +0,0 @@
-# Include the nanopb provided Makefile rules
-include ../../extra/nanopb.mk
-
-# Compiler flags to enable all warnings & debug info
-CFLAGS = -ansi -Wall -Werror -g -O0
-CFLAGS += -I$(NANOPB_DIR)
-
-all: server client
-
-.SUFFIXES:
-
-clean:
-	rm -f server client fileproto.pb.c fileproto.pb.h
-
-%: %.c common.c fileproto.pb.c
-	$(CC) $(CFLAGS) -o $@ $^ $(NANOPB_CORE)
-
diff --git a/CAN-binder/libs/nanopb/examples/network_server/README.txt b/CAN-binder/libs/nanopb/examples/network_server/README.txt
deleted file mode 100644
index 7bdcbed5..00000000
--- a/CAN-binder/libs/nanopb/examples/network_server/README.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Nanopb example "network_server"
-===============================
-
-This example demonstrates the use of nanopb to communicate over network
-connections. It consists of a server that sends file listings, and of
-a client that requests the file list from the server.
-
-Example usage
--------------
-
-user@host:~/nanopb/examples/network_server$ make        # Build the example
-protoc -ofileproto.pb fileproto.proto
-python ../../generator/nanopb_generator.py fileproto.pb
-Writing to fileproto.pb.h and fileproto.pb.c
-cc -ansi -Wall -Werror -I .. -g -O0 -I../.. -o server server.c
-    ../../pb_decode.c ../../pb_encode.c fileproto.pb.c common.c
-cc -ansi -Wall -Werror -I .. -g -O0 -I../.. -o client client.c
-    ../../pb_decode.c ../../pb_encode.c fileproto.pb.c common.c
-
-user@host:~/nanopb/examples/network_server$ ./server &  # Start the server on background
-[1] 24462
-
-petteri@oddish:~/nanopb/examples/network_server$ ./client /bin  # Request the server to list /bin
-Got connection.
-Listing directory: /bin
-1327119    bzdiff
-1327126    bzless
-1327147    ps
-1327178    ntfsmove
-1327271    mv
-1327187    mount
-1327259    false
-1327266    tempfile
-1327285    zfgrep
-1327165    gzexe
-1327204    nc.openbsd
-1327260    uname
-
-
-Details of implementation
--------------------------
-fileproto.proto contains the portable Google Protocol Buffers protocol definition.
-It could be used as-is to implement a server or a client in any other language, for
-example Python or Java.
-
-fileproto.options contains the nanopb-specific options for the protocol file. This
-sets the amount of space allocated for file names when decoding messages.
-
-common.c/h contains functions that allow nanopb to read and write directly from
-network socket. This way there is no need to allocate a separate buffer to store
-the message.
-
-server.c contains the code to open a listening socket, to respond to clients and
-to list directory contents.
-
-client.c contains the code to connect to a server, to send a request and to print
-the response message.
-
-The code is implemented using the POSIX socket api, but it should be easy enough
-to port into any other socket api, such as lwip.
diff --git a/CAN-binder/libs/nanopb/examples/network_server/client.c b/CAN-binder/libs/nanopb/examples/network_server/client.c
deleted file mode 100644
index 00f6dab8..00000000
--- a/CAN-binder/libs/nanopb/examples/network_server/client.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/* This is a simple TCP client that connects to port 1234 and prints a list
- * of files in a given directory.
- *
- * It directly deserializes and serializes messages from network, minimizing
- * memory use.
- * 
- * For flexibility, this example is implemented using posix api.
- * In a real embedded system you would typically use some other kind of
- * a communication and filesystem layer.
- */
-
-#include <sys/socket.h>
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <dirent.h>
-#include <stdio.h>
-#include <string.h>
-
-#include <pb_encode.h>
-#include <pb_decode.h>
-
-#include "fileproto.pb.h"
-#include "common.h"
-
-/* This callback function will be called once for each filename received
- * from the server. The filenames will be printed out immediately, so that
- * no memory has to be allocated for them.
- */
-bool printfile_callback(pb_istream_t *stream, const pb_field_t *field, void **arg)
-{
-    FileInfo fileinfo = {};
-    
-    if (!pb_decode(stream, FileInfo_fields, &fileinfo))
-        return false;
-    
-    printf("%-10lld %s\n", (long long)fileinfo.inode, fileinfo.name);
-    
-    return true;
-}
-
-/* This function sends a request to socket 'fd' to list the files in
- * directory given in 'path'. The results received from server will
- * be printed to stdout.
- */
-bool listdir(int fd, char *path)
-{
-    /* Construct and send the request to server */
-    {
-        ListFilesRequest request = {};
-        pb_ostream_t output = pb_ostream_from_socket(fd);
-        uint8_t zero = 0;
-        
-        /* In our protocol, path is optional. If it is not given,
-         * the server will list the root directory. */
-        if (path == NULL)
-        {
-            request.has_path = false;
-        }
-        else
-        {
-            request.has_path = true;
-            if (strlen(path) + 1 > sizeof(request.path))
-            {
-                fprintf(stderr, "Too long path.\n");
-                return false;
-            }
-            
-            strcpy(request.path, path);
-        }
-        
-        /* Encode the request. It is written to the socket immediately
-         * through our custom stream. */
-        if (!pb_encode(&output, ListFilesRequest_fields, &request))
-        {
-            fprintf(stderr, "Encoding failed: %s\n", PB_GET_ERROR(&output));
-            return false;
-        }
-        
-        /* We signal the end of request with a 0 tag. */
-        pb_write(&output, &zero, 1);
-    }
-    
-    /* Read back the response from server */
-    {
-        ListFilesResponse response = {};
-        pb_istream_t input = pb_istream_from_socket(fd);
-        
-        /* Give a pointer to our callback function, which will handle the
-         * filenames as they arrive. */
-        response.file.funcs.decode = &printfile_callback;
-        
-        if (!pb_decode(&input, ListFilesResponse_fields, &response))
-        {
-            fprintf(stderr, "Decode failed: %s\n", PB_GET_ERROR(&input));
-            return false;
-        }
-        
-        /* If the message from server decodes properly, but directory was
-         * not found on server side, we get path_error == true. */
-        if (response.path_error)
-        {
-            fprintf(stderr, "Server reported error.\n");
-            return false;
-        }
-    }
-    
-    return true;
-}
-
-int main(int argc, char **argv)
-{
-    int sockfd;
-    struct sockaddr_in servaddr;
-    char *path = NULL;
-    
-    if (argc > 1)
-        path = argv[1];
-    
-    sockfd = socket(AF_INET, SOCK_STREAM, 0);
-    
-    /* Connect to server running on localhost:1234 */
-    memset(&servaddr, 0, sizeof(servaddr));
-    servaddr.sin_family = AF_INET;
-    servaddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
-    servaddr.sin_port = htons(1234);
-    
-    if (connect(sockfd, (struct sockaddr *)&servaddr, sizeof(servaddr)) != 0)
-    {
-        perror("connect");
-        return 1;
-    }
-    
-    /* Send the directory listing request */
-    if (!listdir(sockfd, path))
-        return 2;
-    
-    /* Close connection */
-    close(sockfd);
-    
-    return 0;
-}
diff --git a/CAN-binder/libs/nanopb/examples/network_server/common.c b/CAN-binder/libs/nanopb/examples/network_server/common.c
deleted file mode 100644
index 04a5aa85..00000000
--- a/CAN-binder/libs/nanopb/examples/network_server/common.c
+++ /dev/null
@@ -1,40 +0,0 @@
-/* Simple binding of nanopb streams to TCP sockets.
- */
-
-#include <sys/socket.h>
-#include <sys/types.h>
-#include <pb_encode.h>
-#include <pb_decode.h>
-
-#include "common.h"
-
-static bool write_callback(pb_ostream_t *stream, const uint8_t *buf, size_t count)
-{
-    int fd = (intptr_t)stream->state;
-    return send(fd, buf, count, 0) == count;
-}
-
-static bool read_callback(pb_istream_t *stream, uint8_t *buf, size_t count)
-{
-    int fd = (intptr_t)stream->state;
-    int result;
-    
-    result = recv(fd, buf, count, MSG_WAITALL);
-    
-    if (result == 0)
-        stream->bytes_left = 0; /* EOF */
-    
-    return result == count;
-}
-
-pb_ostream_t pb_ostream_from_socket(int fd)
-{
-    pb_ostream_t stream = {&write_callback, (void*)(intptr_t)fd, SIZE_MAX, 0};
-    return stream;
-}
-
-pb_istream_t pb_istream_from_socket(int fd)
-{
-    pb_istream_t stream = {&read_callback, (void*)(intptr_t)fd, SIZE_MAX};
-    return stream;
-}
diff --git a/CAN-binder/libs/nanopb/examples/network_server/common.h b/CAN-binder/libs/nanopb/examples/network_server/common.h
deleted file mode 100644
index 8dab3b7c..00000000
--- a/CAN-binder/libs/nanopb/examples/network_server/common.h
+++ /dev/null
@@ -1,9 +0,0 @@
-#ifndef _PB_EXAMPLE_COMMON_H_
-#define _PB_EXAMPLE_COMMON_H_
-
-#include <pb.h>
-
-pb_ostream_t pb_ostream_from_socket(int fd);
-pb_istream_t pb_istream_from_socket(int fd);
-
-#endif
\ No newline at end of file
diff --git a/CAN-binder/libs/nanopb/examples/network_server/fileproto.options b/CAN-binder/libs/nanopb/examples/network_server/fileproto.options
deleted file mode 100644
index 29a2ab0e..00000000
--- a/CAN-binder/libs/nanopb/examples/network_server/fileproto.options
+++ /dev/null
@@ -1,13 +0,0 @@
-# This file defines the nanopb-specific options for the messages defined
-# in fileproto.proto.
-#
-# If you come from high-level programming background, the hardcoded
-# maximum lengths may disgust you. However, if your microcontroller only
-# has a few kB of ram to begin with, setting reasonable limits for
-# filenames is ok.
-#
-# On the other hand, using the callback interface, it is not necessary
-# to set a limit on the number of files in the response.
-
-ListFilesRequest.path 	max_size:128
-FileInfo.name 		max_size:128
diff --git a/CAN-binder/libs/nanopb/examples/network_server/fileproto.proto b/CAN-binder/libs/nanopb/examples/network_server/fileproto.proto
deleted file mode 100644
index 5640b8d5..00000000
--- a/CAN-binder/libs/nanopb/examples/network_server/fileproto.proto
+++ /dev/null
@@ -1,20 +0,0 @@
-// This defines protocol for a simple server that lists files.
-//
-// See also the nanopb-specific options in fileproto.options.
-
-syntax = "proto2";
-
-message ListFilesRequest {
-    optional string path = 1 [default = "/"];
-}
-
-message FileInfo {
-    required uint64 inode = 1;
-    required string name = 2;
-}
-
-message ListFilesResponse {
-    optional bool path_error = 1 [default = false];
-    repeated FileInfo file = 2;
-}
-
diff --git a/CAN-binder/libs/nanopb/examples/network_server/server.c b/CAN-binder/libs/nanopb/examples/network_server/server.c
deleted file mode 100644
index 46a5f38d..00000000
--- a/CAN-binder/libs/nanopb/examples/network_server/server.c
+++ /dev/null
@@ -1,158 +0,0 @@
-/* This is a simple TCP server that listens on port 1234 and provides lists
- * of files to clients, using a protocol defined in file_server.proto.
- *
- * It directly deserializes and serializes messages from network, minimizing
- * memory use.
- * 
- * For flexibility, this example is implemented using posix api.
- * In a real embedded system you would typically use some other kind of
- * a communication and filesystem layer.
- */
-
-#include <sys/socket.h>
-#include <sys/types.h>
-#include <netinet/in.h>
-#include <unistd.h>
-#include <dirent.h>
-#include <stdio.h>
-#include <string.h>
-
-#include <pb_encode.h>
-#include <pb_decode.h>
-
-#include "fileproto.pb.h"
-#include "common.h"
-
-/* This callback function will be called once during the encoding.
- * It will write out any number of FileInfo entries, without consuming unnecessary memory.
- * This is accomplished by fetching the filenames one at a time and encoding them
- * immediately.
- */
-bool listdir_callback(pb_ostream_t *stream, const pb_field_t *field, void * const *arg)
-{
-    DIR *dir = (DIR*) *arg;
-    struct dirent *file;
-    FileInfo fileinfo = {};
-    
-    while ((file = readdir(dir)) != NULL)
-    {
-        fileinfo.inode = file->d_ino;
-        strncpy(fileinfo.name, file->d_name, sizeof(fileinfo.name));
-        fileinfo.name[sizeof(fileinfo.name) - 1] = '\0';
-        
-        /* This encodes the header for the field, based on the constant info
-         * from pb_field_t. */
-        if (!pb_encode_tag_for_field(stream, field))
-            return false;
-        
-        /* This encodes the data for the field, based on our FileInfo structure. */
-        if (!pb_encode_submessage(stream, FileInfo_fields, &fileinfo))
-            return false;
-    }
-    
-    return true;
-}
-
-/* Handle one arriving client connection.
- * Clients are expected to send a ListFilesRequest, terminated by a '0'.
- * Server will respond with a ListFilesResponse message.
- */
-void handle_connection(int connfd)
-{
-    DIR *directory = NULL;
-    
-    /* Decode the message from the client and open the requested directory. */
-    {
-        ListFilesRequest request = {};
-        pb_istream_t input = pb_istream_from_socket(connfd);
-        
-        if (!pb_decode(&input, ListFilesRequest_fields, &request))
-        {
-            printf("Decode failed: %s\n", PB_GET_ERROR(&input));
-            return;
-        }
-        
-        directory = opendir(request.path);
-        printf("Listing directory: %s\n", request.path);
-    }
-    
-    /* List the files in the directory and transmit the response to client */
-    {
-        ListFilesResponse response = {};
-        pb_ostream_t output = pb_ostream_from_socket(connfd);
-        
-        if (directory == NULL)
-        {
-            perror("opendir");
-            
-            /* Directory was not found, transmit error status */
-            response.has_path_error = true;
-            response.path_error = true;
-            response.file.funcs.encode = NULL;
-        }
-        else
-        {
-            /* Directory was found, transmit filenames */
-            response.has_path_error = false;
-            response.file.funcs.encode = &listdir_callback;
-            response.file.arg = directory;
-        }
-        
-        if (!pb_encode(&output, ListFilesResponse_fields, &response))
-        {
-            printf("Encoding failed: %s\n", PB_GET_ERROR(&output));
-        }
-    }
-    
-    if (directory != NULL)
-        closedir(directory);
-}
-
-int main(int argc, char **argv)
-{
-    int listenfd, connfd;
-    struct sockaddr_in servaddr;
-    int reuse = 1;
-    
-    /* Listen on localhost:1234 for TCP connections */
-    listenfd = socket(AF_INET, SOCK_STREAM, 0);
-    setsockopt(listenfd, SOL_SOCKET, SO_REUSEADDR, &reuse, sizeof(reuse));
-    
-    memset(&servaddr, 0, sizeof(servaddr));
-    servaddr.sin_family = AF_INET;
-    servaddr.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
-    servaddr.sin_port = htons(1234);
-    if (bind(listenfd, (struct sockaddr*)&servaddr, sizeof(servaddr)) != 0)
-    {
-        perror("bind");
-        return 1;
-    }
-    
-    if (listen(listenfd, 5) != 0)
-    {
-        perror("listen");
-        return 1;
-    }
-    
-    for(;;)
-    {
-        /* Wait for a client */
-        connfd = accept(listenfd, NULL, NULL);
-        
-        if (connfd < 0)
-        {
-            perror("accept");
-            return 1;
-        }
-        
-        printf("Got connection.\n");
-        
-        handle_connection(connfd);
-        
-        printf("Closing connection.\n");
-        
-        close(connfd);
-    }
-    
-    return 0;
-}
diff --git a/CAN-binder/libs/nanopb/examples/simple/Makefile b/CAN-binder/libs/nanopb/examples/simple/Makefile
deleted file mode 100644
index 970a8650..00000000
--- a/CAN-binder/libs/nanopb/examples/simple/Makefile
+++ /dev/null
@@ -1,22 +0,0 @@
-# Include the nanopb provided Makefile rules
-include ../../extra/nanopb.mk
-
-# Compiler flags to enable all warnings & debug info
-CFLAGS = -Wall -Werror -g -O0
-CFLAGS += -I$(NANOPB_DIR)
-
-# C source code files that are required
-CSRC  = simple.c                   # The main program
-CSRC += simple.pb.c                # The compiled protocol definition
-CSRC += $(NANOPB_DIR)/pb_encode.c  # The nanopb encoder
-CSRC += $(NANOPB_DIR)/pb_decode.c  # The nanopb decoder
-CSRC += $(NANOPB_DIR)/pb_common.c  # The nanopb common parts
-
-# Build rule for the main program
-simple: $(CSRC)
-	$(CC) $(CFLAGS) -osimple $(CSRC)
-
-# Build rule for the protocol
-simple.pb.c: simple.proto
-	$(PROTOC) $(PROTOC_OPTS) --nanopb_out=. simple.proto
-
diff --git a/CAN-binder/libs/nanopb/examples/simple/README.txt b/CAN-binder/libs/nanopb/examples/simple/README.txt
deleted file mode 100644
index ee77bfc7..00000000
--- a/CAN-binder/libs/nanopb/examples/simple/README.txt
+++ /dev/null
@@ -1,29 +0,0 @@
-Nanopb example "simple"
-=======================
-
-This example demonstrates the very basic use of nanopb. It encodes and
-decodes a simple message.
-
-The code uses four different API functions:
-
-  * pb_ostream_from_buffer() to declare the output buffer that is to be used
-  * pb_encode() to encode a message
-  * pb_istream_from_buffer() to declare the input buffer that is to be used
-  * pb_decode() to decode a message
-
-Example usage
--------------
-
-On Linux, simply type "make" to build the example. After that, you can
-run it with the command: ./simple
-
-On other platforms, you first have to compile the protocol definition using
-the following command::
-
-  ../../generator-bin/protoc --nanopb_out=. simple.proto
-
-After that, add the following four files to your project and compile:
-
-  simple.c  simple.pb.c  pb_encode.c  pb_decode.c
-
-
diff --git a/CAN-binder/libs/nanopb/examples/simple/simple.c b/CAN-binder/libs/nanopb/examples/simple/simple.c
deleted file mode 100644
index 1f6b1373..00000000
--- a/CAN-binder/libs/nanopb/examples/simple/simple.c
+++ /dev/null
@@ -1,71 +0,0 @@
-#include <stdio.h>
-#include <pb_encode.h>
-#include <pb_decode.h>
-#include "simple.pb.h"
-
-int main()
-{
-    /* This is the buffer where we will store our message. */
-    uint8_t buffer[128];
-    size_t message_length;
-    bool status;
-    
-    /* Encode our message */
-    {
-        /* Allocate space on the stack to store the message data.
-         *
-         * Nanopb generates simple struct definitions for all the messages.
-         * - check out the contents of simple.pb.h!
-         * It is a good idea to always initialize your structures
-         * so that you do not have garbage data from RAM in there.
-         */
-        SimpleMessage message = SimpleMessage_init_zero;
-        
-        /* Create a stream that will write to our buffer. */
-        pb_ostream_t stream = pb_ostream_from_buffer(buffer, sizeof(buffer));
-        
-        /* Fill in the lucky number */
-        message.lucky_number = 13;
-        
-        /* Now we are ready to encode the message! */
-        status = pb_encode(&stream, SimpleMessage_fields, &message);
-        message_length = stream.bytes_written;
-        
-        /* Then just check for any errors.. */
-        if (!status)
-        {
-            printf("Encoding failed: %s\n", PB_GET_ERROR(&stream));
-            return 1;
-        }
-    }
-    
-    /* Now we could transmit the message over network, store it in a file or
-     * wrap it to a pigeon's leg.
-     */
-
-    /* But because we are lazy, we will just decode it immediately. */
-    
-    {
-        /* Allocate space for the decoded message. */
-        SimpleMessage message = SimpleMessage_init_zero;
-        
-        /* Create a stream that reads from the buffer. */
-        pb_istream_t stream = pb_istream_from_buffer(buffer, message_length);
-        
-        /* Now we are ready to decode the message. */
-        status = pb_decode(&stream, SimpleMessage_fields, &message);
-        
-        /* Check for errors... */
-        if (!status)
-        {
-            printf("Decoding failed: %s\n", PB_GET_ERROR(&stream));
-            return 1;
-        }
-        
-        /* Print the data contained in the message. */
-        printf("Your lucky number was %d!\n", message.lucky_number);
-    }
-    
-    return 0;
-}
-
diff --git a/CAN-binder/libs/nanopb/examples/simple/simple.proto b/CAN-binder/libs/nanopb/examples/simple/simple.proto
deleted file mode 100644
index 5c73a3b2..00000000
--- a/CAN-binder/libs/nanopb/examples/simple/simple.proto
+++ /dev/null
@@ -1,9 +0,0 @@
-// A very simple protocol definition, consisting of only
-// one message.
-
-syntax = "proto2";
-
-message SimpleMessage {
-    required int32 lucky_number = 1;
-}
-
diff --git a/CAN-binder/libs/nanopb/examples/using_double_on_avr/Makefile b/CAN-binder/libs/nanopb/examples/using_double_on_avr/Makefile
deleted file mode 100644
index 874a64bd..00000000
--- a/CAN-binder/libs/nanopb/examples/using_double_on_avr/Makefile
+++ /dev/null
@@ -1,24 +0,0 @@
-# Include the nanopb provided Makefile rules
-include ../../extra/nanopb.mk
-
-# Compiler flags to enable all warnings & debug info
-CFLAGS = -Wall -Werror -g -O0
-CFLAGS += -I$(NANOPB_DIR)
-
-all: run_tests
-
-.SUFFIXES:
-
-clean:
-	rm -f test_conversions encode_double decode_double doubleproto.pb.c doubleproto.pb.h
-
-test_conversions: test_conversions.c double_conversion.c
-	$(CC) $(CFLAGS) -o $@ $^
-
-%: %.c double_conversion.c doubleproto.pb.c
-	$(CC) $(CFLAGS) -o $@ $^ $(NANOPB_CORE)
-
-run_tests: test_conversions encode_double decode_double
-	./test_conversions
-	./encode_double | ./decode_double
-    
diff --git a/CAN-binder/libs/nanopb/examples/using_double_on_avr/README.txt b/CAN-binder/libs/nanopb/examples/using_double_on_avr/README.txt
deleted file mode 100644
index d9fcdfc6..00000000
--- a/CAN-binder/libs/nanopb/examples/using_double_on_avr/README.txt
+++ /dev/null
@@ -1,25 +0,0 @@
-Nanopb example "using_double_on_avr"
-====================================
-
-Some processors/compilers, such as AVR-GCC, do not support the double
-datatype. Instead, they have sizeof(double) == 4. Because protocol
-binary format uses the double encoding directly, this causes trouble
-if the protocol in .proto requires double fields.
-
-This directory contains a solution to this problem. It uses uint64_t
-to store the raw wire values, because its size is correct on all
-platforms. The file double_conversion.c provides functions that
-convert these values to/from floats, without relying on compiler
-support.
-
-To use this method, you need to make some modifications to your code:
-
-1) Change all 'double' fields into 'fixed64' in the .proto.
-
-2) Whenever writing to a 'double' field, use float_to_double().
-
-3) Whenever reading a 'double' field, use double_to_float().
-
-The conversion routines are as accurate as the float datatype can
-be. Furthermore, they should handle all special values (NaN, inf, denormalized
-numbers) correctly. There are testcases in test_conversions.c.
diff --git a/CAN-binder/libs/nanopb/examples/using_double_on_avr/decode_double.c b/CAN-binder/libs/nanopb/examples/using_double_on_avr/decode_double.c
deleted file mode 100644
index 5802eca7..00000000
--- a/CAN-binder/libs/nanopb/examples/using_double_on_avr/decode_double.c
+++ /dev/null
@@ -1,33 +0,0 @@
-/* Decodes a double value into a float variable.
- * Used to read double values with AVR code, which doesn't support double directly.
- */
-
-#include <stdio.h>
-#include <pb_decode.h>
-#include "double_conversion.h"
-#include "doubleproto.pb.h"
-
-int main()
-{
-    uint8_t buffer[32];
-    size_t count = fread(buffer, 1, sizeof(buffer), stdin);
-    pb_istream_t stream = pb_istream_from_buffer(buffer, count);
-    
-    AVRDoubleMessage message;
-    pb_decode(&stream, AVRDoubleMessage_fields, &message);
-    
-    float v1 = double_to_float(message.field1);
-    float v2 = double_to_float(message.field2);
-
-    printf("Values: %f %f\n", v1, v2);
-    
-    if (v1 == 1234.5678f &&
-        v2 == 0.00001f)
-    {
-        return 0;
-    }
-    else
-    {
-        return 1;
-    }
-}
diff --git a/CAN-binder/libs/nanopb/examples/using_double_on_avr/double_conversion.c b/CAN-binder/libs/nanopb/examples/using_double_on_avr/double_conversion.c
deleted file mode 100644
index cf79b9a0..00000000
--- a/CAN-binder/libs/nanopb/examples/using_double_on_avr/double_conversion.c
+++ /dev/null
@@ -1,123 +0,0 @@
-/* Conversion routines for platforms that do not support 'double' directly. */
-
-#include "double_conversion.h"
-#include <math.h>
-
-typedef union {
-    float f;
-    uint32_t i;
-} conversion_t;
-
-/* Note: IEE 754 standard specifies float formats as follows:
- * Single precision: sign,  8-bit exp, 23-bit frac.
- * Double precision: sign, 11-bit exp, 52-bit frac.
- */
-
-uint64_t float_to_double(float value)
-{
-    conversion_t in;
-    in.f = value;
-    uint8_t sign;
-    int16_t exponent;
-    uint64_t mantissa;
-    
-    /* Decompose input value */
-    sign = (in.i >> 31) & 1;
-    exponent = ((in.i >> 23) & 0xFF) - 127;
-    mantissa = in.i & 0x7FFFFF;
-    
-    if (exponent == 128)
-    {
-        /* Special value (NaN etc.) */
-        exponent = 1024;
-    }
-    else if (exponent == -127)
-    {
-        if (!mantissa)
-        {
-            /* Zero */
-            exponent = -1023;
-        }
-        else
-        {
-            /* Denormalized */
-            mantissa <<= 1;
-            while (!(mantissa & 0x800000))
-            {
-                mantissa <<= 1;
-                exponent--;
-            }
-            mantissa &= 0x7FFFFF;
-        }
-    }
-    
-    /* Combine fields */
-    mantissa <<= 29;
-    mantissa |= (uint64_t)(exponent + 1023) << 52;
-    mantissa |= (uint64_t)sign << 63;
-    
-    return mantissa;
-}
-
-float double_to_float(uint64_t value)
-{
-    uint8_t sign;
-    int16_t exponent;
-    uint32_t mantissa;
-    conversion_t out;
-
-    /* Decompose input value */
-    sign = (value >> 63) & 1;
-    exponent = ((value >> 52) & 0x7FF) - 1023;
-    mantissa = (value >> 28) & 0xFFFFFF; /* Highest 24 bits */
- 
-    /* Figure if value is in range representable by floats. */
-    if (exponent == 1024)
-    {
-        /* Special value */
-        exponent = 128;
-    }
-    else if (exponent > 127)
-    {
-        /* Too large */        
-        if (sign)
-            return -INFINITY;
-        else
-            return INFINITY;
-    }
-    else if (exponent < -150)
-    {
-        /* Too small */
-        if (sign)
-            return -0.0f;
-        else
-            return 0.0f;
-    }
-    else if (exponent < -126)
-    {
-        /* Denormalized */
-        mantissa |= 0x1000000;
-        mantissa >>= (-126 - exponent);
-        exponent = -127;
-    }
- 
-    /* Round off mantissa */
-    mantissa = (mantissa + 1) >> 1;
-    
-    /* Check if mantissa went over 2.0 */
-    if (mantissa & 0x800000)
-    {
-        exponent += 1;
-        mantissa &= 0x7FFFFF;
-        mantissa >>= 1;
-    }
-    
-    /* Combine fields */
-    out.i = mantissa;
-    out.i |= (uint32_t)(exponent + 127) << 23;
-    out.i |= (uint32_t)sign << 31;
-    
-    return out.f;
-}
-
-
diff --git a/CAN-binder/libs/nanopb/examples/using_double_on_avr/double_conversion.h b/CAN-binder/libs/nanopb/examples/using_double_on_avr/double_conversion.h
deleted file mode 100644
index 62b6a8ae..00000000
--- a/CAN-binder/libs/nanopb/examples/using_double_on_avr/double_conversion.h
+++ /dev/null
@@ -1,26 +0,0 @@
-/* AVR-GCC does not have real double datatype. Instead its double
- * is equal to float, i.e. 32 bit value. If you need to communicate
- * with other systems that use double in their .proto files, you
- * need to do some conversion.
- *
- * These functions use bitwise operations to mangle floats into doubles
- * and then store them in uint64_t datatype.
- */
-
-#ifndef DOUBLE_CONVERSION
-#define DOUBLE_CONVERSION
-
-#include <stdint.h>
-
-/* Convert native 4-byte float into a 8-byte double. */
-extern uint64_t float_to_double(float value);
-
-/* Convert 8-byte double into native 4-byte float.
- * Values are rounded to nearest, 0.5 away from zero.
- * Overflowing values are converted to Inf or -Inf.
- */
-extern float double_to_float(uint64_t value);
-
-
-#endif
-
diff --git a/CAN-binder/libs/nanopb/examples/using_double_on_avr/doubleproto.proto b/CAN-binder/libs/nanopb/examples/using_double_on_avr/doubleproto.proto
deleted file mode 100644
index 72d3f9c1..00000000
--- a/CAN-binder/libs/nanopb/examples/using_double_on_avr/doubleproto.proto
+++ /dev/null
@@ -1,15 +0,0 @@
-// A message containing doubles, as used by other applications.
-syntax = "proto2";
-
-message DoubleMessage {
-    required double field1 = 1;
-    required double field2 = 2;
-}
-
-// A message containing doubles, but redefined using uint64_t.
-// For use in AVR code.
-message AVRDoubleMessage {
-    required fixed64 field1 = 1;
-    required fixed64 field2 = 2;
-}
-
diff --git a/CAN-binder/libs/nanopb/examples/using_double_on_avr/encode_double.c b/CAN-binder/libs/nanopb/examples/using_double_on_avr/encode_double.c
deleted file mode 100644
index cd532d46..00000000
--- a/CAN-binder/libs/nanopb/examples/using_double_on_avr/encode_double.c
+++ /dev/null
@@ -1,25 +0,0 @@
-/* Encodes a float value into a double on the wire.
- * Used to emit doubles from AVR code, which doesn't support double directly.
- */
-
-#include <stdio.h>
-#include <pb_encode.h>
-#include "double_conversion.h"
-#include "doubleproto.pb.h"
-
-int main()
-{
-    AVRDoubleMessage message = {
-        float_to_double(1234.5678f),
-        float_to_double(0.00001f)
-    };
-    
-    uint8_t buffer[32];
-    pb_ostream_t stream = pb_ostream_from_buffer(buffer, sizeof(buffer));
-    
-    pb_encode(&stream, AVRDoubleMessage_fields, &message);
-    fwrite(buffer, 1, stream.bytes_written, stdout);
-
-    return 0;
-}
-
diff --git a/CAN-binder/libs/nanopb/examples/using_double_on_avr/test_conversions.c b/CAN-binder/libs/nanopb/examples/using_double_on_avr/test_conversions.c
deleted file mode 100644
index 22620a6a..00000000
--- a/CAN-binder/libs/nanopb/examples/using_double_on_avr/test_conversions.c
+++ /dev/null
@@ -1,56 +0,0 @@
-#include "double_conversion.h"
-#include <math.h>
-#include <stdio.h>
-
-static const double testvalues[] = {
-           0.0,        -0.0,         0.1,         -0.1,
-          M_PI,       -M_PI,  123456.789,  -123456.789,
-      INFINITY,   -INFINITY,         NAN, INFINITY - INFINITY,
-          1e38,       -1e38,        1e39,        -1e39,
-         1e-38,      -1e-38,       1e-39,       -1e-39,
-   3.14159e-37,-3.14159e-37, 3.14159e-43, -3.14159e-43,
-         1e-60,      -1e-60,       1e-45,       -1e-45,
-    0.99999999999999, -0.99999999999999, 127.999999999999, -127.999999999999
-};
-
-#define TESTVALUES_COUNT (sizeof(testvalues)/sizeof(testvalues[0]))
-
-int main()
-{
-    int status = 0;
-    int i;
-    for (i = 0; i < TESTVALUES_COUNT; i++)
-    {
-        double orig = testvalues[i];
-        float expected_float = (float)orig;
-        double expected_double = (double)expected_float;
-        
-        float got_float = double_to_float(*(uint64_t*)&orig);
-        uint64_t got_double = float_to_double(got_float);
-        
-        uint32_t e1 = *(uint32_t*)&expected_float;
-        uint32_t g1 = *(uint32_t*)&got_float;
-        uint64_t e2 = *(uint64_t*)&expected_double;
-        uint64_t g2 = got_double;
-        
-        if (g1 != e1)
-        {
-            printf("%3d double_to_float fail: %08x != %08x\n", i, g1, e1);
-            status = 1;
-        }
-        
-        if (g2 != e2)
-        {
-            printf("%3d float_to_double fail: %016llx != %016llx\n", i,
-                (unsigned long long)g2,
-                (unsigned long long)e2);
-            status = 1;
-        }
-    }
-
-    return status;
-}
-
-    
-    
-
diff --git a/CAN-binder/libs/nanopb/examples/using_union_messages/Makefile b/CAN-binder/libs/nanopb/examples/using_union_messages/Makefile
deleted file mode 100644
index 66396a02..00000000
--- a/CAN-binder/libs/nanopb/examples/using_union_messages/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-# Include the nanopb provided Makefile rules
-include ../../extra/nanopb.mk
-
-# Compiler flags to enable all warnings & debug info
-CFLAGS = -ansi -Wall -Werror -g -O0
-CFLAGS += -I$(NANOPB_DIR)
-
-all: encode decode
-	./encode 1 | ./decode
-	./encode 2 | ./decode
-	./encode 3 | ./decode
-
-.SUFFIXES:
-
-clean:
-	rm -f encode unionproto.pb.h unionproto.pb.c
-
-%: %.c unionproto.pb.c
-	$(CC) $(CFLAGS) -o $@ $^ $(NANOPB_CORE)
-
diff --git a/CAN-binder/libs/nanopb/examples/using_union_messages/README.txt b/CAN-binder/libs/nanopb/examples/using_union_messages/README.txt
deleted file mode 100644
index 7a1e75d4..00000000
--- a/CAN-binder/libs/nanopb/examples/using_union_messages/README.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-Nanopb example "using_union_messages"
-=====================================
-
-Union messages is a common technique in Google Protocol Buffers used to
-represent a group of messages, only one of which is passed at a time.
-It is described in Google's documentation:
-https://developers.google.com/protocol-buffers/docs/techniques#union
-
-This directory contains an example on how to encode and decode union messages
-with minimal memory usage. Usually, nanopb would allocate space to store
-all of the possible messages at the same time, even though at most one of
-them will be used at a time.
-
-By using some of the lower level nanopb APIs, we can manually generate the
-top level message, so that we only need to allocate the one submessage that
-we actually want. Similarly when decoding, we can manually read the tag of
-the top level message, and only then allocate the memory for the submessage
-after we already know its type.
-
-
-Example usage
--------------
-
-Type `make` to run the example. It will build it and run commands like
-following:
-
-./encode 1 | ./decode
-Got MsgType1: 42
-./encode 2 | ./decode
-Got MsgType2: true
-./encode 3 | ./decode
-Got MsgType3: 3 1415
-
-This simply demonstrates that the "decode" program has correctly identified
-the type of the received message, and managed to decode it.
-
-
-Details of implementation
--------------------------
-
-unionproto.proto contains the protocol used in the example. It consists of
-three messages: MsgType1, MsgType2 and MsgType3, which are collected together
-into UnionMessage.
-
-encode.c takes one command line argument, which should be a number 1-3. It
-then fills in and encodes the corresponding message, and writes it to stdout.
-
-decode.c reads a UnionMessage from stdin. Then it calls the function
-decode_unionmessage_type() to determine the type of the message. After that,
-the corresponding message is decoded and the contents of it printed to the
-screen.
-
diff --git a/CAN-binder/libs/nanopb/examples/using_union_messages/decode.c b/CAN-binder/libs/nanopb/examples/using_union_messages/decode.c
deleted file mode 100644
index b9f4af55..00000000
--- a/CAN-binder/libs/nanopb/examples/using_union_messages/decode.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/* This program reads a message from stdin, detects its type and decodes it.
- */
- 
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include <pb_decode.h>
-#include "unionproto.pb.h"
-
-/* This function reads manually the first tag from the stream and finds the
- * corresponding message type. It doesn't yet decode the actual message.
- *
- * Returns a pointer to the MsgType_fields array, as an identifier for the
- * message type. Returns null if the tag is of unknown type or an error occurs.
- */
-const pb_field_t* decode_unionmessage_type(pb_istream_t *stream)
-{
-    pb_wire_type_t wire_type;
-    uint32_t tag;
-    bool eof;
-
-    while (pb_decode_tag(stream, &wire_type, &tag, &eof))
-    {
-        if (wire_type == PB_WT_STRING)
-        {
-            const pb_field_t *field;
-            for (field = UnionMessage_fields; field->tag != 0; field++)
-            {
-                if (field->tag == tag && (field->type & PB_LTYPE_SUBMESSAGE))
-                {
-                    /* Found our field. */
-                    return field->ptr;
-                }
-            }
-        }
-        
-        /* Wasn't our field.. */
-        pb_skip_field(stream, wire_type);
-    }
-    
-    return NULL;
-}
-
-bool decode_unionmessage_contents(pb_istream_t *stream, const pb_field_t fields[], void *dest_struct)
-{
-    pb_istream_t substream;
-    bool status;
-    if (!pb_make_string_substream(stream, &substream))
-        return false;
-    
-    status = pb_decode(&substream, fields, dest_struct);
-    pb_close_string_substream(stream, &substream);
-    return status;
-}
-
-int main()
-{
-    /* Read the data into buffer */
-    uint8_t buffer[512];
-    size_t count = fread(buffer, 1, sizeof(buffer), stdin);
-    pb_istream_t stream = pb_istream_from_buffer(buffer, count);
-    
-    const pb_field_t *type = decode_unionmessage_type(&stream);
-    bool status = false;
-    
-    if (type == MsgType1_fields)
-    {
-        MsgType1 msg = {};
-        status = decode_unionmessage_contents(&stream, MsgType1_fields, &msg);
-        printf("Got MsgType1: %d\n", msg.value);
-    }
-    else if (type == MsgType2_fields)
-    {
-        MsgType2 msg = {};
-        status = decode_unionmessage_contents(&stream, MsgType2_fields, &msg);
-        printf("Got MsgType2: %s\n", msg.value ? "true" : "false");
-    }
-    else if (type == MsgType3_fields)
-    {
-        MsgType3 msg = {};
-        status = decode_unionmessage_contents(&stream, MsgType3_fields, &msg);
-        printf("Got MsgType3: %d %d\n", msg.value1, msg.value2);    
-    }
-    
-    if (!status)
-    {
-        printf("Decode failed: %s\n", PB_GET_ERROR(&stream));
-        return 1;
-    }
-    
-    return 0;
-}
-
-
-
diff --git a/CAN-binder/libs/nanopb/examples/using_union_messages/encode.c b/CAN-binder/libs/nanopb/examples/using_union_messages/encode.c
deleted file mode 100644
index e124bf91..00000000
--- a/CAN-binder/libs/nanopb/examples/using_union_messages/encode.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/* This program takes a command line argument and encodes a message in
- * one of MsgType1, MsgType2 or MsgType3.
- */
- 
-#include <stdio.h>
-#include <string.h>
-#include <stdlib.h>
-
-#include <pb_encode.h>
-#include "unionproto.pb.h"
-
-/* This function is the core of the union encoding process. It handles
- * the top-level pb_field_t array manually, in order to encode a correct
- * field tag before the message. The pointer to MsgType_fields array is
- * used as an unique identifier for the message type.
- */
-bool encode_unionmessage(pb_ostream_t *stream, const pb_field_t messagetype[], const void *message)
-{
-    const pb_field_t *field;
-    for (field = UnionMessage_fields; field->tag != 0; field++)
-    {
-        if (field->ptr == messagetype)
-        {
-            /* This is our field, encode the message using it. */
-            if (!pb_encode_tag_for_field(stream, field))
-                return false;
-            
-            return pb_encode_submessage(stream, messagetype, message);
-        }
-    }
-    
-    /* Didn't find the field for messagetype */
-    return false;
-}
-
-int main(int argc, char **argv)
-{
-    if (argc != 2)
-    {
-        fprintf(stderr, "Usage: %s (1|2|3)\n", argv[0]);
-        return 1;
-    }
-    
-    uint8_t buffer[512];
-    pb_ostream_t stream = pb_ostream_from_buffer(buffer, sizeof(buffer));
-    
-    bool status = false;
-    int msgtype = atoi(argv[1]);
-    if (msgtype == 1)
-    {
-        /* Send message of type 1 */
-        MsgType1 msg = {42};
-        status = encode_unionmessage(&stream, MsgType1_fields, &msg);
-    }
-    else if (msgtype == 2)
-    {
-        /* Send message of type 2 */
-        MsgType2 msg = {true};
-        status = encode_unionmessage(&stream, MsgType2_fields, &msg);
-    }
-    else if (msgtype == 3)
-    {
-        /* Send message of type 3 */
-        MsgType3 msg = {3, 1415};
-        status = encode_unionmessage(&stream, MsgType3_fields, &msg);
-    }
-    else
-    {
-        fprintf(stderr, "Unknown message type: %d\n", msgtype);
-        return 2;
-    }
-    
-    if (!status)
-    {
-        fprintf(stderr, "Encoding failed!\n");
-        return 3;
-    }
-    else
-    {
-        fwrite(buffer, 1, stream.bytes_written, stdout);
-        return 0; /* Success */
-    }
-}
-
-
diff --git a/CAN-binder/libs/nanopb/examples/using_union_messages/unionproto.proto b/CAN-binder/libs/nanopb/examples/using_union_messages/unionproto.proto
deleted file mode 100644
index 209df0d2..00000000
--- a/CAN-binder/libs/nanopb/examples/using_union_messages/unionproto.proto
+++ /dev/null
@@ -1,32 +0,0 @@
-// This is an example of how to handle 'union' style messages
-// with nanopb, without allocating memory for all the message types.
-//
-// There is no official type in Protocol Buffers for describing unions,
-// but they are commonly implemented by filling out exactly one of
-// several optional fields.
-
-syntax = "proto2";
-
-message MsgType1
-{
-    required int32 value = 1;
-}
-
-message MsgType2
-{
-    required bool value = 1;
-}
-
-message MsgType3
-{
-    required int32 value1 = 1;
-    required int32 value2 = 2;
-}
-
-message UnionMessage
-{
-    optional MsgType1 msg1 = 1;
-    optional MsgType2 msg2 = 2;
-    optional MsgType3 msg3 = 3;
-}
-