Separation Generator to a dedicated repo

Change-Id: Id94831651c3266861435272a6e36c7884bef2c45
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 0 insertions, 714 deletions

diff --git a/CAN-binder/libs/nanopb/generator/proto/google/protobuf/descriptor.proto b/CAN-binder/libs/nanopb/generator/proto/google/protobuf/descriptor.proto
deleted file mode 100644
index e17c0cc8..00000000
--- a/CAN-binder/libs/nanopb/generator/proto/google/protobuf/descriptor.proto
+++ /dev/null
@@ -1,714 +0,0 @@
-// Protocol Buffers - Google's data interchange format
-// Copyright 2008 Google Inc.  All rights reserved.
-// https://developers.google.com/protocol-buffers/
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// Author: kenton@google.com (Kenton Varda)
-//  Based on original Protocol Buffers design by
-//  Sanjay Ghemawat, Jeff Dean, and others.
-//
-// The messages in this file describe the definitions found in .proto files.
-// A valid .proto file can be translated directly to a FileDescriptorProto
-// without any other information (e.g. without reading its imports).
-
-
-syntax = "proto2";
-
-package google.protobuf;
-option java_package = "com.google.protobuf";
-option java_outer_classname = "DescriptorProtos";
-
-// descriptor.proto must be optimized for speed because reflection-based
-// algorithms don't work during bootstrapping.
-option optimize_for = SPEED;
-
-// The protocol compiler can output a FileDescriptorSet containing the .proto
-// files it parses.
-message FileDescriptorSet {
-  repeated FileDescriptorProto file = 1;
-}
-
-// Describes a complete .proto file.
-message FileDescriptorProto {
-  optional string name = 1;       // file name, relative to root of source tree
-  optional string package = 2;    // e.g. "foo", "foo.bar", etc.
-
-  // Names of files imported by this file.
-  repeated string dependency = 3;
-  // Indexes of the public imported files in the dependency list above.
-  repeated int32 public_dependency = 10;
-  // Indexes of the weak imported files in the dependency list.
-  // For Google-internal migration only. Do not use.
-  repeated int32 weak_dependency = 11;
-
-  // All top-level definitions in this file.
-  repeated DescriptorProto message_type = 4;
-  repeated EnumDescriptorProto enum_type = 5;
-  repeated ServiceDescriptorProto service = 6;
-  repeated FieldDescriptorProto extension = 7;
-
-  optional FileOptions options = 8;
-
-  // This field contains optional information about the original source code.
-  // You may safely remove this entire field without harming runtime
-  // functionality of the descriptors -- the information is needed only by
-  // development tools.
-  optional SourceCodeInfo source_code_info = 9;
-
-  // The syntax of the proto file.
-  // The supported values are "proto2" and "proto3".
-  optional string syntax = 12;
-}
-
-// Describes a message type.
-message DescriptorProto {
-  optional string name = 1;
-
-  repeated FieldDescriptorProto field = 2;
-  repeated FieldDescriptorProto extension = 6;
-
-  repeated DescriptorProto nested_type = 3;
-  repeated EnumDescriptorProto enum_type = 4;
-
-  message ExtensionRange {
-    optional int32 start = 1;
-    optional int32 end = 2;
-  }
-  repeated ExtensionRange extension_range = 5;
-
-  repeated OneofDescriptorProto oneof_decl = 8;
-
-  optional MessageOptions options = 7;
-}
-
-// Describes a field within a message.
-message FieldDescriptorProto {
-  enum Type {
-    // 0 is reserved for errors.
-    // Order is weird for historical reasons.
-    TYPE_DOUBLE         = 1;
-    TYPE_FLOAT          = 2;
-    // Not ZigZag encoded.  Negative numbers take 10 bytes.  Use TYPE_SINT64 if
-    // negative values are likely.
-    TYPE_INT64          = 3;
-    TYPE_UINT64         = 4;
-    // Not ZigZag encoded.  Negative numbers take 10 bytes.  Use TYPE_SINT32 if
-    // negative values are likely.
-    TYPE_INT32          = 5;
-    TYPE_FIXED64        = 6;
-    TYPE_FIXED32        = 7;
-    TYPE_BOOL           = 8;
-    TYPE_STRING         = 9;
-    TYPE_GROUP          = 10;  // Tag-delimited aggregate.
-    TYPE_MESSAGE        = 11;  // Length-delimited aggregate.
-
-    // New in version 2.
-    TYPE_BYTES          = 12;
-    TYPE_UINT32         = 13;
-    TYPE_ENUM           = 14;
-    TYPE_SFIXED32       = 15;
-    TYPE_SFIXED64       = 16;
-    TYPE_SINT32         = 17;  // Uses ZigZag encoding.
-    TYPE_SINT64         = 18;  // Uses ZigZag encoding.
-  };
-
-  enum Label {
-    // 0 is reserved for errors
-    LABEL_OPTIONAL      = 1;
-    LABEL_REQUIRED      = 2;
-    LABEL_REPEATED      = 3;
-    // TODO(sanjay): Should we add LABEL_MAP?
-  };
-
-  optional string name = 1;
-  optional int32 number = 3;
-  optional Label label = 4;
-
-  // If type_name is set, this need not be set.  If both this and type_name
-  // are set, this must be one of TYPE_ENUM, TYPE_MESSAGE or TYPE_GROUP.
-  optional Type type = 5;
-
-  // For message and enum types, this is the name of the type.  If the name
-  // starts with a '.', it is fully-qualified.  Otherwise, C++-like scoping
-  // rules are used to find the type (i.e. first the nested types within this
-  // message are searched, then within the parent, on up to the root
-  // namespace).
-  optional string type_name = 6;
-
-  // For extensions, this is the name of the type being extended.  It is
-  // resolved in the same manner as type_name.
-  optional string extendee = 2;
-
-  // For numeric types, contains the original text representation of the value.
-  // For booleans, "true" or "false".
-  // For strings, contains the default text contents (not escaped in any way).
-  // For bytes, contains the C escaped value.  All bytes >= 128 are escaped.
-  // TODO(kenton):  Base-64 encode?
-  optional string default_value = 7;
-
-  // If set, gives the index of a oneof in the containing type's oneof_decl
-  // list.  This field is a member of that oneof.  Extensions of a oneof should
-  // not set this since the oneof to which they belong will be inferred based
-  // on the extension range containing the extension's field number.
-  optional int32 oneof_index = 9;
-
-  optional FieldOptions options = 8;
-}
-
-// Describes a oneof.
-message OneofDescriptorProto {
-  optional string name = 1;
-}
-
-// Describes an enum type.
-message EnumDescriptorProto {
-  optional string name = 1;
-
-  repeated EnumValueDescriptorProto value = 2;
-
-  optional EnumOptions options = 3;
-}
-
-// Describes a value within an enum.
-message EnumValueDescriptorProto {
-  optional string name = 1;
-  optional int32 number = 2;
-
-  optional EnumValueOptions options = 3;
-}
-
-// Describes a service.
-message ServiceDescriptorProto {
-  optional string name = 1;
-  repeated MethodDescriptorProto method = 2;
-
-  optional ServiceOptions options = 3;
-}
-
-// Describes a method of a service.
-message MethodDescriptorProto {
-  optional string name = 1;
-
-  // Input and output type names.  These are resolved in the same way as
-  // FieldDescriptorProto.type_name, but must refer to a message type.
-  optional string input_type = 2;
-  optional string output_type = 3;
-
-  optional MethodOptions options = 4;
-
-  // Identifies if client streams multiple client messages
-  optional bool client_streaming = 5 [default=false];
-  // Identifies if server streams multiple server messages
-  optional bool server_streaming = 6 [default=false];
-}
-
-
-// ===================================================================
-// Options
-
-// Each of the definitions above may have "options" attached.  These are
-// just annotations which may cause code to be generated slightly differently
-// or may contain hints for code that manipulates protocol messages.
-//
-// Clients may define custom options as extensions of the *Options messages.
-// These extensions may not yet be known at parsing time, so the parser cannot
-// store the values in them.  Instead it stores them in a field in the *Options
-// message called uninterpreted_option. This field must have the same name
-// across all *Options messages. We then use this field to populate the
-// extensions when we build a descriptor, at which point all protos have been
-// parsed and so all extensions are known.
-//
-// Extension numbers for custom options may be chosen as follows:
-// * For options which will only be used within a single application or
-//   organization, or for experimental options, use field numbers 50000
-//   through 99999.  It is up to you to ensure that you do not use the
-//   same number for multiple options.
-// * For options which will be published and used publicly by multiple
-//   independent entities, e-mail protobuf-global-extension-registry@google.com
-//   to reserve extension numbers. Simply provide your project name (e.g.
-//   Object-C plugin) and your porject website (if available) -- there's no need
-//   to explain how you intend to use them. Usually you only need one extension
-//   number. You can declare multiple options with only one extension number by
-//   putting them in a sub-message. See the Custom Options section of the docs
-//   for examples:
-//   https://developers.google.com/protocol-buffers/docs/proto#options
-//   If this turns out to be popular, a web service will be set up
-//   to automatically assign option numbers.
-
-
-message FileOptions {
-
-  // Sets the Java package where classes generated from this .proto will be
-  // placed.  By default, the proto package is used, but this is often
-  // inappropriate because proto packages do not normally start with backwards
-  // domain names.
-  optional string java_package = 1;
-
-
-  // If set, all the classes from the .proto file are wrapped in a single
-  // outer class with the given name.  This applies to both Proto1
-  // (equivalent to the old "--one_java_file" option) and Proto2 (where
-  // a .proto always translates to a single class, but you may want to
-  // explicitly choose the class name).
-  optional string java_outer_classname = 8;
-
-  // If set true, then the Java code generator will generate a separate .java
-  // file for each top-level message, enum, and service defined in the .proto
-  // file.  Thus, these types will *not* be nested inside the outer class
-  // named by java_outer_classname.  However, the outer class will still be
-  // generated to contain the file's getDescriptor() method as well as any
-  // top-level extensions defined in the file.
-  optional bool java_multiple_files = 10 [default=false];
-
-  // If set true, then the Java code generator will generate equals() and
-  // hashCode() methods for all messages defined in the .proto file.
-  // - In the full runtime, this is purely a speed optimization, as the
-  // AbstractMessage base class includes reflection-based implementations of
-  // these methods.
-  //- In the lite runtime, setting this option changes the semantics of
-  // equals() and hashCode() to more closely match those of the full runtime;
-  // the generated methods compute their results based on field values rather
-  // than object identity. (Implementations should not assume that hashcodes
-  // will be consistent across runtimes or versions of the protocol compiler.)
-  optional bool java_generate_equals_and_hash = 20 [default=false];
-
-  // If set true, then the Java2 code generator will generate code that
-  // throws an exception whenever an attempt is made to assign a non-UTF-8
-  // byte sequence to a string field.
-  // Message reflection will do the same.
-  // However, an extension field still accepts non-UTF-8 byte sequences.
-  // This option has no effect on when used with the lite runtime.
-  optional bool java_string_check_utf8 = 27 [default=false];
-
-
-  // Generated classes can be optimized for speed or code size.
-  enum OptimizeMode {
-    SPEED = 1;        // Generate complete code for parsing, serialization,
-                      // etc.
-    CODE_SIZE = 2;    // Use ReflectionOps to implement these methods.
-    LITE_RUNTIME = 3; // Generate code using MessageLite and the lite runtime.
-  }
-  optional OptimizeMode optimize_for = 9 [default=SPEED];
-
-  // Sets the Go package where structs generated from this .proto will be
-  // placed. If omitted, the Go package will be derived from the following:
-  //   - The basename of the package import path, if provided.
-  //   - Otherwise, the package statement in the .proto file, if present.
-  //   - Otherwise, the basename of the .proto file, without extension.
-  optional string go_package = 11;
-
-
-
-  // Should generic services be generated in each language?  "Generic" services
-  // are not specific to any particular RPC system.  They are generated by the
-  // main code generators in each language (without additional plugins).
-  // Generic services were the only kind of service generation supported by
-  // early versions of google.protobuf.
-  //
-  // Generic services are now considered deprecated in favor of using plugins
-  // that generate code specific to your particular RPC system.  Therefore,
-  // these default to false.  Old code which depends on generic services should
-  // explicitly set them to true.
-  optional bool cc_generic_services = 16 [default=false];
-  optional bool java_generic_services = 17 [default=false];
-  optional bool py_generic_services = 18 [default=false];
-
-  // Is this file deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for everything in the file, or it will be completely ignored; in the very
-  // least, this is a formalization for deprecating files.
-  optional bool deprecated = 23 [default=false];
-
-
-  // Enables the use of arenas for the proto messages in this file. This applies
-  // only to generated classes for C++.
-  optional bool cc_enable_arenas = 31 [default=false];
-
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message MessageOptions {
-  // Set true to use the old proto1 MessageSet wire format for extensions.
-  // This is provided for backwards-compatibility with the MessageSet wire
-  // format.  You should not use this for any other reason:  It's less
-  // efficient, has fewer features, and is more complicated.
-  //
-  // The message must be defined exactly as follows:
-  //   message Foo {
-  //     option message_set_wire_format = true;
-  //     extensions 4 to max;
-  //   }
-  // Note that the message cannot have any defined fields; MessageSets only
-  // have extensions.
-  //
-  // All extensions of your type must be singular messages; e.g. they cannot
-  // be int32s, enums, or repeated messages.
-  //
-  // Because this is an option, the above two restrictions are not enforced by
-  // the protocol compiler.
-  optional bool message_set_wire_format = 1 [default=false];
-
-  // Disables the generation of the standard "descriptor()" accessor, which can
-  // conflict with a field of the same name.  This is meant to make migration
-  // from proto1 easier; new code should avoid fields named "descriptor".
-  optional bool no_standard_descriptor_accessor = 2 [default=false];
-
-  // Is this message deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the message, or it will be completely ignored; in the very least,
-  // this is a formalization for deprecating messages.
-  optional bool deprecated = 3 [default=false];
-
-  // Whether the message is an automatically generated map entry type for the
-  // maps field.
-  //
-  // For maps fields:
-  //     map<KeyType, ValueType> map_field = 1;
-  // The parsed descriptor looks like:
-  //     message MapFieldEntry {
-  //         option map_entry = true;
-  //         optional KeyType key = 1;
-  //         optional ValueType value = 2;
-  //     }
-  //     repeated MapFieldEntry map_field = 1;
-  //
-  // Implementations may choose not to generate the map_entry=true message, but
-  // use a native map in the target language to hold the keys and values.
-  // The reflection APIs in such implementions still need to work as
-  // if the field is a repeated message field.
-  //
-  // NOTE: Do not set the option in .proto files. Always use the maps syntax
-  // instead. The option should only be implicitly set by the proto compiler
-  // parser.
-  optional bool map_entry = 7;
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message FieldOptions {
-  // The ctype option instructs the C++ code generator to use a different
-  // representation of the field than it normally would.  See the specific
-  // options below.  This option is not yet implemented in the open source
-  // release -- sorry, we'll try to include it in a future version!
-  optional CType ctype = 1 [default = STRING];
-  enum CType {
-    // Default mode.
-    STRING = 0;
-
-    CORD = 1;
-
-    STRING_PIECE = 2;
-  }
-  // The packed option can be enabled for repeated primitive fields to enable
-  // a more efficient representation on the wire. Rather than repeatedly
-  // writing the tag and type for each element, the entire array is encoded as
-  // a single length-delimited blob.
-  optional bool packed = 2;
-
-
-
-  // Should this field be parsed lazily?  Lazy applies only to message-type
-  // fields.  It means that when the outer message is initially parsed, the
-  // inner message's contents will not be parsed but instead stored in encoded
-  // form.  The inner message will actually be parsed when it is first accessed.
-  //
-  // This is only a hint.  Implementations are free to choose whether to use
-  // eager or lazy parsing regardless of the value of this option.  However,
-  // setting this option true suggests that the protocol author believes that
-  // using lazy parsing on this field is worth the additional bookkeeping
-  // overhead typically needed to implement it.
-  //
-  // This option does not affect the public interface of any generated code;
-  // all method signatures remain the same.  Furthermore, thread-safety of the
-  // interface is not affected by this option; const methods remain safe to
-  // call from multiple threads concurrently, while non-const methods continue
-  // to require exclusive access.
-  //
-  //
-  // Note that implementations may choose not to check required fields within
-  // a lazy sub-message.  That is, calling IsInitialized() on the outher message
-  // may return true even if the inner message has missing required fields.
-  // This is necessary because otherwise the inner message would have to be
-  // parsed in order to perform the check, defeating the purpose of lazy
-  // parsing.  An implementation which chooses not to check required fields
-  // must be consistent about it.  That is, for any particular sub-message, the
-  // implementation must either *always* check its required fields, or *never*
-  // check its required fields, regardless of whether or not the message has
-  // been parsed.
-  optional bool lazy = 5 [default=false];
-
-  // Is this field deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for accessors, or it will be completely ignored; in the very least, this
-  // is a formalization for deprecating fields.
-  optional bool deprecated = 3 [default=false];
-
-  // For Google-internal migration only. Do not use.
-  optional bool weak = 10 [default=false];
-
-
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message EnumOptions {
-
-  // Set this option to true to allow mapping different tag names to the same
-  // value.
-  optional bool allow_alias = 2;
-
-  // Is this enum deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the enum, or it will be completely ignored; in the very least, this
-  // is a formalization for deprecating enums.
-  optional bool deprecated = 3 [default=false];
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message EnumValueOptions {
-  // Is this enum value deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the enum value, or it will be completely ignored; in the very least,
-  // this is a formalization for deprecating enum values.
-  optional bool deprecated = 1 [default=false];
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message ServiceOptions {
-
-  // Note:  Field numbers 1 through 32 are reserved for Google's internal RPC
-  //   framework.  We apologize for hoarding these numbers to ourselves, but
-  //   we were already using them long before we decided to release Protocol
-  //   Buffers.
-
-  // Is this service deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the service, or it will be completely ignored; in the very least,
-  // this is a formalization for deprecating services.
-  optional bool deprecated = 33 [default=false];
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-message MethodOptions {
-
-  // Note:  Field numbers 1 through 32 are reserved for Google's internal RPC
-  //   framework.  We apologize for hoarding these numbers to ourselves, but
-  //   we were already using them long before we decided to release Protocol
-  //   Buffers.
-
-  // Is this method deprecated?
-  // Depending on the target platform, this can emit Deprecated annotations
-  // for the method, or it will be completely ignored; in the very least,
-  // this is a formalization for deprecating methods.
-  optional bool deprecated = 33 [default=false];
-
-  // The parser stores options it doesn't recognize here. See above.
-  repeated UninterpretedOption uninterpreted_option = 999;
-
-  // Clients can define custom options in extensions of this message. See above.
-  extensions 1000 to max;
-}
-
-
-// A message representing a option the parser does not recognize. This only
-// appears in options protos created by the compiler::Parser class.
-// DescriptorPool resolves these when building Descriptor objects. Therefore,
-// options protos in descriptor objects (e.g. returned by Descriptor::options(),
-// or produced by Descriptor::CopyTo()) will never have UninterpretedOptions
-// in them.
-message UninterpretedOption {
-  // The name of the uninterpreted option.  Each string represents a segment in
-  // a dot-separated name.  is_extension is true iff a segment represents an
-  // extension (denoted with parentheses in options specs in .proto files).
-  // E.g.,{ ["foo", false], ["bar.baz", true], ["qux", false] } represents
-  // "foo.(bar.baz).qux".
-  message NamePart {
-    required string name_part = 1;
-    required bool is_extension = 2;
-  }
-  repeated NamePart name = 2;
-
-  // The value of the uninterpreted option, in whatever type the tokenizer
-  // identified it as during parsing. Exactly one of these should be set.
-  optional string identifier_value = 3;
-  optional uint64 positive_int_value = 4;
-  optional int64 negative_int_value = 5;
-  optional double double_value = 6;
-  optional bytes string_value = 7;
-  optional string aggregate_value = 8;
-}
-
-// ===================================================================
-// Optional source code info
-
-// Encapsulates information about the original source file from which a
-// FileDescriptorProto was generated.
-message SourceCodeInfo {
-  // A Location identifies a piece of source code in a .proto file which
-  // corresponds to a particular definition.  This information is intended
-  // to be useful to IDEs, code indexers, documentation generators, and similar
-  // tools.
-  //
-  // For example, say we have a file like:
-  //   message Foo {
-  //     optional string foo = 1;
-  //   }
-  // Let's look at just the field definition:
-  //   optional string foo = 1;
-  //   ^       ^^     ^^  ^  ^^^
-  //   a       bc     de  f  ghi
-  // We have the following locations:
-  //   span   path               represents
-  //   [a,i)  [ 4, 0, 2, 0 ]     The whole field definition.
-  //   [a,b)  [ 4, 0, 2, 0, 4 ]  The label (optional).
-  //   [c,d)  [ 4, 0, 2, 0, 5 ]  The type (string).
-  //   [e,f)  [ 4, 0, 2, 0, 1 ]  The name (foo).
-  //   [g,h)  [ 4, 0, 2, 0, 3 ]  The number (1).
-  //
-  // Notes:
-  // - A location may refer to a repeated field itself (i.e. not to any
-  //   particular index within it).  This is used whenever a set of elements are
-  //   logically enclosed in a single code segment.  For example, an entire
-  //   extend block (possibly containing multiple extension definitions) will
-  //   have an outer location whose path refers to the "extensions" repeated
-  //   field without an index.
-  // - Multiple locations may have the same path.  This happens when a single
-  //   logical declaration is spread out across multiple places.  The most
-  //   obvious example is the "extend" block again -- there may be multiple
-  //   extend blocks in the same scope, each of which will have the same path.
-  // - A location's span is not always a subset of its parent's span.  For
-  //   example, the "extendee" of an extension declaration appears at the
-  //   beginning of the "extend" block and is shared by all extensions within
-  //   the block.
-  // - Just because a location's span is a subset of some other location's span
-  //   does not mean that it is a descendent.  For example, a "group" defines
-  //   both a type and a field in a single declaration.  Thus, the locations
-  //   corresponding to the type and field and their components will overlap.
-  // - Code which tries to interpret locations should probably be designed to
-  //   ignore those that it doesn't understand, as more types of locations could
-  //   be recorded in the future.
-  repeated Location location = 1;
-  message Location {
-    // Identifies which part of the FileDescriptorProto was defined at this
-    // location.
-    //
-    // Each element is a field number or an index.  They form a path from
-    // the root FileDescriptorProto to the place where the definition.  For
-    // example, this path:
-    //   [ 4, 3, 2, 7, 1 ]
-    // refers to:
-    //   file.message_type(3)  // 4, 3
-    //       .field(7)         // 2, 7
-    //       .name()           // 1
-    // This is because FileDescriptorProto.message_type has field number 4:
-    //   repeated DescriptorProto message_type = 4;
-    // and DescriptorProto.field has field number 2:
-    //   repeated FieldDescriptorProto field = 2;
-    // and FieldDescriptorProto.name has field number 1:
-    //   optional string name = 1;
-    //
-    // Thus, the above path gives the location of a field name.  If we removed
-    // the last element:
-    //   [ 4, 3, 2, 7 ]
-    // this path refers to the whole field declaration (from the beginning
-    // of the label to the terminating semicolon).
-    repeated int32 path = 1 [packed=true];
-
-    // Always has exactly three or four elements: start line, start column,
-    // end line (optional, otherwise assumed same as start line), end column.
-    // These are packed into a single field for efficiency.  Note that line
-    // and column numbers are zero-based -- typically you will want to add
-    // 1 to each before displaying to a user.
-    repeated int32 span = 2 [packed=true];
-
-    // If this SourceCodeInfo represents a complete declaration, these are any
-    // comments appearing before and after the declaration which appear to be
-    // attached to the declaration.
-    //
-    // A series of line comments appearing on consecutive lines, with no other
-    // tokens appearing on those lines, will be treated as a single comment.
-    //
-    // Only the comment content is provided; comment markers (e.g. //) are
-    // stripped out.  For block comments, leading whitespace and an asterisk
-    // will be stripped from the beginning of each line other than the first.
-    // Newlines are included in the output.
-    //
-    // Examples:
-    //
-    //   optional int32 foo = 1;  // Comment attached to foo.
-    //   // Comment attached to bar.
-    //   optional int32 bar = 2;
-    //
-    //   optional string baz = 3;
-    //   // Comment attached to baz.
-    //   // Another line attached to baz.
-    //
-    //   // Comment attached to qux.
-    //   //
-    //   // Another line attached to qux.
-    //   optional double qux = 4;
-    //
-    //   optional string corge = 5;
-    //   /* Block comment attached
-    //    * to corge.  Leading asterisks
-    //    * will be removed. */
-    //   /* Block comment attached to
-    //    * grault. */
-    //   optional int32 grault = 6;
-    optional string leading_comments = 3;
-    optional string trailing_comments = 4;
-  }
-}