Added external libraries from openXC CMake files.

Now libraries are cleanly included and built.

Change-Id: Iaa85639578b55b2da8357bc438426403e2cca8de
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 0 insertions, 148 deletions

diff --git a/CAN-binder/libs/nanopb/generator/proto/plugin.proto b/CAN-binder/libs/nanopb/generator/proto/plugin.proto
deleted file mode 100644
index e627289b..00000000
--- a/CAN-binder/libs/nanopb/generator/proto/plugin.proto
+++ /dev/null
@@ -1,148 +0,0 @@
-// Protocol Buffers - Google's data interchange format
-// Copyright 2008 Google Inc.  All rights reserved.
-// https://developers.google.com/protocol-buffers/
-//
-// Redistribution and use in source and binary forms, with or without
-// modification, are permitted provided that the following conditions are
-// met:
-//
-//     * Redistributions of source code must retain the above copyright
-// notice, this list of conditions and the following disclaimer.
-//     * Redistributions in binary form must reproduce the above
-// copyright notice, this list of conditions and the following disclaimer
-// in the documentation and/or other materials provided with the
-// distribution.
-//     * Neither the name of Google Inc. nor the names of its
-// contributors may be used to endorse or promote products derived from
-// this software without specific prior written permission.
-//
-// THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
-// "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-// LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-// A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-// OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-// SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-// LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-// DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-// THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-// (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-// OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-// Author: kenton@google.com (Kenton Varda)
-//
-// WARNING:  The plugin interface is currently EXPERIMENTAL and is subject to
-//   change.
-//
-// protoc (aka the Protocol Compiler) can be extended via plugins.  A plugin is
-// just a program that reads a CodeGeneratorRequest from stdin and writes a
-// CodeGeneratorResponse to stdout.
-//
-// Plugins written using C++ can use google/protobuf/compiler/plugin.h instead
-// of dealing with the raw protocol defined here.
-//
-// A plugin executable needs only to be placed somewhere in the path.  The
-// plugin should be named "protoc-gen-$NAME", and will then be used when the
-// flag "--${NAME}_out" is passed to protoc.
-
-syntax = "proto2";
-package google.protobuf.compiler;
-option java_package = "com.google.protobuf.compiler";
-option java_outer_classname = "PluginProtos";
-
-import "google/protobuf/descriptor.proto";
-
-// An encoded CodeGeneratorRequest is written to the plugin's stdin.
-message CodeGeneratorRequest {
-  // The .proto files that were explicitly listed on the command-line.  The
-  // code generator should generate code only for these files.  Each file's
-  // descriptor will be included in proto_file, below.
-  repeated string file_to_generate = 1;
-
-  // The generator parameter passed on the command-line.
-  optional string parameter = 2;
-
-  // FileDescriptorProtos for all files in files_to_generate and everything
-  // they import.  The files will appear in topological order, so each file
-  // appears before any file that imports it.
-  //
-  // protoc guarantees that all proto_files will be written after
-  // the fields above, even though this is not technically guaranteed by the
-  // protobuf wire format.  This theoretically could allow a plugin to stream
-  // in the FileDescriptorProtos and handle them one by one rather than read
-  // the entire set into memory at once.  However, as of this writing, this
-  // is not similarly optimized on protoc's end -- it will store all fields in
-  // memory at once before sending them to the plugin.
-  repeated FileDescriptorProto proto_file = 15;
-}
-
-// The plugin writes an encoded CodeGeneratorResponse to stdout.
-message CodeGeneratorResponse {
-  // Error message.  If non-empty, code generation failed.  The plugin process
-  // should exit with status code zero even if it reports an error in this way.
-  //
-  // This should be used to indicate errors in .proto files which prevent the
-  // code generator from generating correct code.  Errors which indicate a
-  // problem in protoc itself -- such as the input CodeGeneratorRequest being
-  // unparseable -- should be reported by writing a message to stderr and
-  // exiting with a non-zero status code.
-  optional string error = 1;
-
-  // Represents a single generated file.
-  message File {
-    // The file name, relative to the output directory.  The name must not
-    // contain "." or ".." components and must be relative, not be absolute (so,
-    // the file cannot lie outside the output directory).  "/" must be used as
-    // the path separator, not "\".
-    //
-    // If the name is omitted, the content will be appended to the previous
-    // file.  This allows the generator to break large files into small chunks,
-    // and allows the generated text to be streamed back to protoc so that large
-    // files need not reside completely in memory at one time.  Note that as of
-    // this writing protoc does not optimize for this -- it will read the entire
-    // CodeGeneratorResponse before writing files to disk.
-    optional string name = 1;
-
-    // If non-empty, indicates that the named file should already exist, and the
-    // content here is to be inserted into that file at a defined insertion
-    // point.  This feature allows a code generator to extend the output
-    // produced by another code generator.  The original generator may provide
-    // insertion points by placing special annotations in the file that look
-    // like:
-    //   @@protoc_insertion_point(NAME)
-    // The annotation can have arbitrary text before and after it on the line,
-    // which allows it to be placed in a comment.  NAME should be replaced with
-    // an identifier naming the point -- this is what other generators will use
-    // as the insertion_point.  Code inserted at this point will be placed
-    // immediately above the line containing the insertion point (thus multiple
-    // insertions to the same point will come out in the order they were added).
-    // The double-@ is intended to make it unlikely that the generated code
-    // could contain things that look like insertion points by accident.
-    //
-    // For example, the C++ code generator places the following line in the
-    // .pb.h files that it generates:
-    //   // @@protoc_insertion_point(namespace_scope)
-    // This line appears within the scope of the file's package namespace, but
-    // outside of any particular class.  Another plugin can then specify the
-    // insertion_point "namespace_scope" to generate additional classes or
-    // other declarations that should be placed in this scope.
-    //
-    // Note that if the line containing the insertion point begins with
-    // whitespace, the same whitespace will be added to every line of the
-    // inserted text.  This is useful for languages like Python, where
-    // indentation matters.  In these languages, the insertion point comment
-    // should be indented the same amount as any inserted code will need to be
-    // in order to work correctly in that context.
-    //
-    // The code generator that generates the initial file and the one which
-    // inserts into it must both run as part of a single invocation of protoc.
-    // Code generators are executed in the order in which they appear on the
-    // command line.
-    //
-    // If |insertion_point| is present, |name| must also be present.
-    optional string insertion_point = 2;
-
-    // The file contents.
-    optional string content = 15;
-  }
-  repeated File file = 15;
-}