Change directory architecture to use 2 separated projects.

Each projects, binder and generator, has to be compiled separatly.
CAN-binder will host high and low level binding
CAN-config-generator only the generator used for low level binding.
build.sh script just launch both build in their respective dir.

Change-Id: Ic77932660fcca507b23a631d4e4e790f608880ae
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 120 insertions, 0 deletions

diff --git a/CAN-binder/low-can-binding/configuration.hpp b/CAN-binder/low-can-binding/configuration.hpp
new file mode 100644
index 00000000..017b148d
--- /dev/null
+++ b/CAN-binder/low-can-binding/configuration.hpp
@@ -0,0 +1,120 @@
+/*
+ * Copyright (C) 2015, 2016 "IoT.bzh"
+ * Author "Romain Forlot" <romain.forlot@iot.bzh>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *	 http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#pragma once
+
+#include <map>
+#include <vector>
+#include <string>
+#include <fcntl.h>
+
+#include "can/can-bus.hpp"
+#include "can/can-signals.hpp"
+#include "can/can-message.hpp"
+#include "diagnostic/diagnostic-manager.hpp"
+
+#include "low-can-binding.hpp"
+
+///
+/// @brief Class representing a configuration attached to the binding.
+///
+/// It regroups all needed objects instance from other class
+///  that will be used along the binding life. It gets a global vision 
+///  on which signals are implemented for that binding. 
+///  Here, it is only the definition of the class with predefined accessors
+///  methods used in the binding.
+///
+///  It will be the reference point to needed objects.
+///
+class configuration_t
+{
+	private:
+		can_bus_t can_bus_manager_ = can_bus_t(
+			afb_daemon_rootdir_open_locale(
+				binder_interface->daemon, "etc/can_buses.json", O_RDONLY, NULL)); ///< instanciate the CAN bus
+				///< This will read the configuration file and initialize all CAN devices specified in it.
+		diagnostic_manager_t diagnostic_manager_; ///< Diagnostic manager use to manage diagnostic message communication.
+		uint8_t active_message_set_ = 0; ///< Which is the active message set ? Default to 0.
+
+		std::vector<can_message_set_t> can_message_set_;
+		std::vector<std::vector<can_message_definition_t>> can_message_definition_;
+		std::vector<std::vector<can_signal_t>> can_signals_;
+		std::vector<std::vector<diagnostic_message_t>> diagnostic_messages_;
+
+		configuration_t(); ///< Private constructor with implementation generated by the AGL generator.
+
+	public:
+		static configuration_t& instance();
+
+		can_bus_t& get_can_bus_manager();
+
+		const std::map<std::string, std::shared_ptr<can_bus_dev_t>>& get_can_bus_devices();
+
+		const std::string get_diagnostic_bus() const;
+
+		diagnostic_manager_t& get_diagnostic_manager() ;
+
+		uint8_t get_active_message_set() const;
+
+		const std::vector<can_message_set_t>& get_can_message_set();
+
+		std::vector<can_signal_t>& get_can_signals();
+
+		std::vector<diagnostic_message_t>& get_diagnostic_messages();
+
+		const std::vector<std::string>& get_signals_prefix() const;
+
+		const std::vector<can_message_definition_t>& get_can_message_definition();
+		const can_message_definition_t& get_can_message_definition(std::uint8_t message_set_id, std::uint8_t message_id);
+
+		uint32_t get_signal_id(diagnostic_message_t& sig) const;
+
+		uint32_t get_signal_id(can_signal_t& sig) const;
+
+		void set_active_message_set(uint8_t id);
+
+		void find_diagnostic_messages(const openxc_DynamicField &key, std::vector<diagnostic_message_t*>& found_signals);
+		diagnostic_message_t* get_diagnostic_message(std::string message_name) const;
+		DiagnosticRequest* get_request_from_diagnostic_message(diagnostic_message_t* diag_msg) const;
+		DiagnosticRequest* get_request_from_diagnostic_message(std::string message_name) const;
+
+		void find_can_signals(const openxc_DynamicField &key, std::vector<can_signal_t*>& found_signals);
+
+/*
+		/// TODO: implement this function as method into can_bus class
+		/// @brief Pre initialize actions made before CAN bus initialization
+		/// @param[in] bus A CanBus struct defining the bus's metadata
+		/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
+		/// @param[in] buses An array of all CAN buses.
+		void pre_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
+		/// TODO: implement this function as method into can_bus class
+		/// @brief Post-initialize actions made after CAN bus initialization
+		/// @param[in] bus A CanBus struct defining the bus's metadata
+		/// @param[in] writable Configure the controller in a writable mode. If false, it will be configured as "listen only" and will not allow writes or even CAN ACKs.
+		/// @param[in] buses An array of all CAN buses.
+		void post_initialize(can_bus_dev_t* bus, bool writable, can_bus_dev_t* buses, const int busCount);
+		/// TODO: implement this function as method into can_bus class
+		/// @brief Check if the device is connected to an active CAN bus, i.e. it's received a message in the recent past.
+		/// @return true if a message was received on the CAN bus within CAN_ACTIVE_TIMEOUT_S seconds.
+		void logBusStatistics(can_bus_dev_t* buses, const int busCount);
+		/// TODO: implement this function as method into can_bus class
+		/// @brief Log transfer statistics about all active CAN buses to the debug log.
+		/// @param[in] buses An array of active CAN buses.
+		bool isBusActive(can_bus_dev_t* bus);
+		*/
+};
+