Change directory architecture to use 2 separated projects.

Each projects, binder and generator, has to be compiled separatly.
CAN-binder will host high and low level binding
CAN-config-generator only the generator used for low level binding.
build.sh script just launch both build in their respective dir.

Change-Id: Ic77932660fcca507b23a631d4e4e790f608880ae
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 618 insertions, 0 deletions

diff --git a/CAN-binder/low-can-binding/diagnostic/diagnostic-manager.cpp b/CAN-binder/low-can-binding/diagnostic/diagnostic-manager.cpp
new file mode 100644
index 00000000..e3a78d0f
--- /dev/null
+++ b/CAN-binder/low-can-binding/diagnostic/diagnostic-manager.cpp
@@ -0,0 +1,618 @@
+/*
+ * Copyright (C) 2015, 2016 "IoT.bzh"
+ * Author "Romain Forlot" <romain.forlot@iot.bzh>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *	 http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+
+#include <systemd/sd-event.h>
+#include <algorithm>
+
+#include "diagnostic-manager.hpp"
+
+#include "../utils/openxc-utils.hpp"
+#include "../configuration.hpp"
+
+#define MAX_RECURRING_DIAGNOSTIC_FREQUENCY_HZ 10
+#define MAX_SIMULTANEOUS_DIAG_REQUESTS 50
+// There are only 8 slots of in flight diagnostic requests
+#define MAX_SIMULTANEOUS_IN_FLIGHT_REQUESTS 8
+#define TIMERFD_ACCURACY 0
+#define MICRO 1000000
+
+diagnostic_manager_t::diagnostic_manager_t()
+	: initialized_{false}
+{}
+
+/// @brief Diagnostic manager isn't initialized at launch but after
+///  CAN bus devices initialization. For the moment, it is only possible
+///  to have 1 diagnostic bus which are the first bus declared in the JSON
+///  description file. Configuration instance will return it.
+///
+/// this will initialize DiagnosticShims and cancel all active requests 
+///  if there are any.
+bool diagnostic_manager_t::initialize()
+{
+	// Mandatory to set the bus before intialize shims.
+	bus_ = configuration_t::instance().get_diagnostic_bus();
+
+	init_diagnostic_shims();
+	reset();
+
+	initialized_ = true;
+	DEBUG(binder_interface, "initialize: Diagnostic Manager initialized");
+	return initialized_;
+}
+
+/// @brief initialize shims used by UDS lib and set initialized_ to true.
+///  It is needed before used the diagnostic manager fully because shims are
+///  required by most member functions.
+void diagnostic_manager_t::init_diagnostic_shims()
+{
+	shims_ = diagnostic_init_shims(shims_logger, shims_send, NULL);
+	DEBUG(binder_interface, "init_diagnostic_shims: Shims initialized");
+}
+
+/// @brief Force cleanup all active requests.
+void diagnostic_manager_t::reset()
+{
+	DEBUG(binder_interface, "Clearing existing diagnostic requests");
+	cleanup_active_requests(true);
+}
+
+/// @brief send function use by diagnostic library. Only one bus used for now
+///  so diagnostic request is sent using the default diagnostic bus not matter of
+///  which is specified in the diagnostic message definition.
+///
+/// @param[in] arbitration_id - CAN arbitration ID to use when send message. OBD2 broadcast ID
+///  is 0x7DF by example.
+/// @param[in] data - The data payload for the message. NULL is valid if size is also 0.
+/// @param[in] size - The size of the data payload, in bytes.
+///
+/// @return true if the CAN message was sent successfully. 
+bool diagnostic_manager_t::shims_send(const uint32_t arbitration_id, const uint8_t* data, const uint8_t size)
+{
+	std::shared_ptr<can_bus_dev_t> can_bus_dev = can_bus_t::get_can_device(configuration_t::instance().get_diagnostic_manager().bus_);
+	if(can_bus_dev != nullptr)
+		return can_bus_dev->shims_send(arbitration_id, data, size);
+	ERROR(binder_interface, "shims_send: Can not retrieve diagnostic bus: %s", configuration_t::instance().get_diagnostic_manager().bus_.c_str());
+	return false;
+}
+
+/// @brief The type signature for an optional logging function, if the user
+/// wishes to provide one. It should print, store or otherwise display the
+/// message.
+///
+/// message - A format string to log using the given parameters.
+/// ... (vargs) - the parameters for the format string.
+///
+void diagnostic_manager_t::shims_logger(const char* format, ...)
+{
+	va_list args;
+	va_start(args, format);
+
+	char buffer[256];
+	vsnprintf(buffer, 256, format, args);
+
+	DEBUG(binder_interface, "shims_logger: %s", buffer);
+}
+
+/// @brief The type signature for a... OpenXC TODO: not used yet.
+void diagnostic_manager_t::shims_timer()
+{}
+
+std::shared_ptr<can_bus_dev_t> diagnostic_manager_t::get_can_bus_dev()
+{
+	return can_bus_t::get_can_device(bus_);
+}
+
+/// @brief Return diagnostic manager shims member.
+DiagnosticShims& diagnostic_manager_t::get_shims()
+{
+	return shims_;
+}
+
+/// @brief Search for a specific active diagnostic request in the provided requests list
+/// and erase it from the vector. This is useful at unsubscription to clean up the list otherwize
+/// all received CAN messages will be passed to DiagnosticRequestHandle of all active diagnostic request
+/// contained in the vector but no event if connected to, so we will decode uneeded request.
+///
+/// @param[in] entry - a pointer of an active_diagnostic_request instance to clean up
+/// @param[in] requests_list - a vector where to make the search and cleaning.
+void diagnostic_manager_t::find_and_erase(active_diagnostic_request_t* entry, std::vector<active_diagnostic_request_t*>& requests_list)
+{
+	auto i = std::find(requests_list.begin(), requests_list.end(), entry);
+	if ( i != requests_list.end())
+		requests_list.erase(i);
+}
+
+// @brief TODO: implement cancel_request if needed... Don't know.
+void diagnostic_manager_t::cancel_request(active_diagnostic_request_t* entry)
+{
+
+	/* TODO: implement acceptance filters.
+	if(entry.arbitration_id_ == OBD2_FUNCTIONAL_BROADCAST_ID) {
+		for(uint32_t filter = OBD2_FUNCTIONAL_RESPONSE_START;
+				filter < OBD2_FUNCTIONAL_RESPONSE_START +
+					OBD2_FUNCTIONAL_RESPONSE_COUNT;
+				filter++) {
+			removeAcceptanceFilter(entry.bus_, filter,
+					CanMessageFormat::STANDARD, getCanBuses(),
+					getCanBusCount());
+		}
+	} else {
+		removeAcceptanceFilter(entry.bus_,
+				entry.arbitration_id_ +
+					DIAGNOSTIC_RESPONSE_ARBITRATION_ID_OFFSET,
+				CanMessageFormat::STANDARD, getCanBuses(), getCanBusCount());
+	}*/
+}
+
+/// @brief Cleanup a specific request if it isn't running and get complete. As it is almost
+/// impossible to get that state for a recurring request without waiting for that, you can 
+/// force the cleaning operation.
+///
+/// @param[in] entry - the request to clean
+/// @param[in] force - Force the cleaning or not ?
+void diagnostic_manager_t::cleanup_request(active_diagnostic_request_t* entry, bool force)
+{
+	if((force || (entry != nullptr && entry->get_in_flight() && entry->request_completed())))
+	{
+		entry->set_in_flight(false);
+
+		char request_string[128] = {0};
+		diagnostic_request_to_string(&entry->get_handle()->request,
+			request_string, sizeof(request_string));
+		if(force && entry->get_recurring())
+		{
+			find_and_erase(entry, recurring_requests_);
+			cancel_request(entry);
+			DEBUG(binder_interface, "cleanup_request: Cancelling completed, recurring request: %s", request_string);
+		}
+		else
+		{
+			DEBUG(binder_interface, "cleanup_request: Cancelling completed, non-recurring request: %s", request_string);
+			find_and_erase(entry, non_recurring_requests_);
+			cancel_request(entry);
+		}
+	}
+}
+
+/// @brief Clean up all requests lists, recurring and not recurring.
+///
+/// @param[in] force - Force the cleaning or not ? If true, that will do
+/// the same effect as a call to reset().
+void diagnostic_manager_t::cleanup_active_requests(bool force)
+{
+	for(auto& entry : non_recurring_requests_)
+		if (entry != nullptr)
+			cleanup_request(entry, force);
+
+	for(auto& entry : recurring_requests_)
+		if (entry != nullptr)
+			cleanup_request(entry, force);
+}
+
+/// @brief Will return the active_diagnostic_request_t pointer for theDiagnosticRequest or nullptr if
+/// not found.
+///
+/// @param[in] request - Search key, method will go through recurring list to see if it find that request
+///  holded by the DiagnosticHandle member.
+active_diagnostic_request_t* diagnostic_manager_t::find_recurring_request(const DiagnosticRequest* request)
+{
+	for (auto& entry : recurring_requests_)
+	{
+		if(entry != nullptr)
+		{
+			if(diagnostic_request_equals(&entry->get_handle()->request, request))
+			{
+				return entry;
+				break;
+			}
+		}
+	}
+	return nullptr;
+}
+
+/// @brief Add and send a new one-time diagnostic request.
+///
+/// A one-time (aka non-recurring) request can existing in parallel with a
+/// recurring request for the same PID or mode, that's not a problem.
+///
+/// For an example, see the docs for addRecurringRequest. This function is very
+/// similar but leaves out the frequencyHz parameter.
+///
+/// @param[in] request - The parameters for the request.
+/// @param[in] name - Human readable name this response, to be used when
+///      publishing received responses. TODO: If the name is NULL, the published output
+///      will use the raw OBD-II response format.
+/// @param[in] wait_for_multiple_responses - If false, When any response is received
+///      for this request it will be removed from the active list. If true, the
+///      request will remain active until the timeout clock expires, to allow it
+///      to receive multiple response. Functional broadcast requests will always
+///      waint for the timeout, regardless of this parameter.
+/// @param[in] decoder - An optional DiagnosticResponseDecoder to parse the payload of
+///      responses to this request. If the decoder is NULL, the output will
+///      include the raw payload instead of a parsed value.
+/// @param[in] callback - An optional DiagnosticResponseCallback to be notified whenever a
+///      response is received for this request.
+///
+/// @return true if the request was added successfully. Returns false if there
+/// wasn't a free active request entry, if the frequency was too high or if the
+/// CAN acceptance filters could not be configured,
+bool diagnostic_manager_t::add_request(DiagnosticRequest* request, const std::string name,
+	bool wait_for_multiple_responses, const DiagnosticResponseDecoder decoder,
+	const DiagnosticResponseCallback callback)
+{
+	cleanup_active_requests(false);
+
+	bool added = true;
+
+	if (non_recurring_requests_.size() <= MAX_SIMULTANEOUS_DIAG_REQUESTS)
+	{
+		// TODO: implement Acceptance Filter
+		//	if(updateRequiredAcceptanceFilters(bus, request)) {
+			active_diagnostic_request_t* entry = new active_diagnostic_request_t(bus_, request, name,
+					wait_for_multiple_responses, decoder, callback, 0);
+			entry->set_handle(shims_, request);
+
+			char request_string[128] = {0};
+			diagnostic_request_to_string(&entry->get_handle()->request, request_string,
+					sizeof(request_string));
+
+			find_and_erase(entry, non_recurring_requests_);
+			DEBUG(binder_interface, "Added one-time diagnostic request on bus %s: %s",
+					bus_.c_str(), request_string);
+
+			non_recurring_requests_.push_back(entry);
+	}
+	else
+	{
+		WARNING(binder_interface, "There isn't enough request entry. Vector exhausted %d/%d", (int)non_recurring_requests_.size(), MAX_SIMULTANEOUS_DIAG_REQUESTS);
+		non_recurring_requests_.resize(MAX_SIMULTANEOUS_DIAG_REQUESTS);
+		added = false;
+	}
+	return added;
+}
+
+bool diagnostic_manager_t::validate_optional_request_attributes(float frequencyHz)
+{
+	if(frequencyHz > MAX_RECURRING_DIAGNOSTIC_FREQUENCY_HZ) {
+		DEBUG(binder_interface, "Requested recurring diagnostic frequency %lf is higher than maximum of %d",
+			frequencyHz, MAX_RECURRING_DIAGNOSTIC_FREQUENCY_HZ);
+		return false;
+	}
+	return true;
+}
+
+/// @brief Add and send a new recurring diagnostic request.
+///
+/// At most one recurring request can be active for the same arbitration ID, mode
+/// and (if set) PID on the same bus at one time. If you try and call
+/// addRecurringRequest with the same key, it will return an error.
+///
+/// TODO: This also adds any neccessary CAN acceptance filters so we can receive the
+/// response. If the request is to the functional broadcast ID (0x7df) filters
+/// are added for all functional addresses (0x7e8 to 0x7f0).
+///
+/// Example:
+///
+///     // Creating a functional broadcast, mode 1 request for PID 2.
+///     DiagnosticRequest request = {
+///         arbitration_id: 0x7df,
+///         mode: 1,
+///         has_pid: true,
+///         pid: 2
+///     };
+///
+///     // Add a recurring request, to be sent at 1Hz, and published with the
+///     // name "my_pid_request"
+///     addRecurringRequest(&getConfiguration()->diagnosticsManager,
+///          canBus,
+///          &request,
+///          "my_pid_request",
+///          false,
+///          NULL,
+///          NULL,
+///          1);
+///
+/// @param[in] request - The parameters for the request.
+/// @param[in] name - An optional human readable name this response, to be used when
+///      publishing received responses. If the name is NULL, the published output
+///      will use the raw OBD-II response format.
+/// @param[in] wait_for_multiple_responses - If false, When any response is received
+///      for this request it will be removed from the active list. If true, the
+///      request will remain active until the timeout clock expires, to allow it
+///      to receive multiple response. Functional broadcast requests will always
+///      waint for the timeout, regardless of this parameter.
+/// @param[in] decoder - An optional DiagnosticResponseDecoder to parse the payload of
+///      responses to this request. If the decoder is NULL, the output will
+///      include the raw payload instead of a parsed value.
+/// @param[in] callback - An optional DiagnosticResponseCallback to be notified whenever a
+///      response is received for this request.
+/// @param[in] frequencyHz - The frequency (in Hz) to send the request. A frequency above
+///      MAX_RECURRING_DIAGNOSTIC_FREQUENCY_HZ is not allowed, and will make this
+///      function return false.
+///
+/// @return true if the request was added successfully. Returns false if there
+/// was too much already running requests, if the frequency was too high TODO:or if the
+/// CAN acceptance filters could not be configured,
+///
+bool diagnostic_manager_t::add_recurring_request(DiagnosticRequest* request, const char* name,
+		bool wait_for_multiple_responses, const DiagnosticResponseDecoder decoder,
+		const DiagnosticResponseCallback callback, float frequencyHz)
+{
+	if(!validate_optional_request_attributes(frequencyHz))
+		return false;
+
+	cleanup_active_requests(false);
+
+	bool added = true;
+	if(find_recurring_request(request) == nullptr)
+	{
+		if(recurring_requests_.size() <= MAX_SIMULTANEOUS_DIAG_REQUESTS)
+		{
+			sd_event_source *source;
+			// TODO: implement Acceptance Filter
+			//if(updateRequiredAcceptanceFilters(bus, request)) {
+			active_diagnostic_request_t* entry = new active_diagnostic_request_t(bus_, request, name,
+					wait_for_multiple_responses, decoder, callback, frequencyHz);
+			entry->set_handle(shims_, request);
+
+			//start_diagnostic_request(&shims_, entry->get_handle());
+			//char request_string[128] = {0};
+			//diagnostic_request_to_string(&entry->get_handle()->request, request_string,
+			//		sizeof(request_string));
+
+			uint64_t usec;
+			sd_event_now(afb_daemon_get_event_loop(binder_interface->daemon), CLOCK_BOOTTIME, &usec);
+			if(recurring_requests_.size() > 0)
+			{
+				DEBUG(binder_interface, "add_recurring_request: Added 100ms to usec to stagger sending requests");
+				usec += 100000;
+			}
+
+			DEBUG(binder_interface, "add_recurring_request: Added recurring diagnostic request (freq: %f) on bus %s at %ld. Event loop state: %d",
+					frequencyHz,
+					bus_.c_str(),
+					usec,
+					sd_event_get_state(afb_daemon_get_event_loop(binder_interface->daemon)));
+
+			if(sd_event_add_time(afb_daemon_get_event_loop(binder_interface->daemon), &source,
+					CLOCK_BOOTTIME, usec, TIMERFD_ACCURACY, send_request, request) < 0)
+			{
+				ERROR(binder_interface, "add_recurring_request: Request fails to be schedule through event loop");
+				added = false;
+			}
+			recurring_requests_.push_back(entry);
+		}
+		else
+		{
+			WARNING(binder_interface, "add_recurring_request: There isn't enough request entry. Vector exhausted %d/%d", (int)recurring_requests_.size(), MAX_SIMULTANEOUS_DIAG_REQUESTS);
+			recurring_requests_.resize(MAX_SIMULTANEOUS_DIAG_REQUESTS);
+			added = false;
+		}
+	}
+	else
+	{
+		DEBUG(binder_interface, "add_recurring_request: Can't add request, one already exists with same key");
+		added = false;
+	}
+	return added;
+}
+
+/// @brief Returns true if there are two active requests running for the same arbitration ID.
+bool diagnostic_manager_t::conflicting(active_diagnostic_request_t* request, active_diagnostic_request_t* candidate) const
+{
+	return (candidate->get_in_flight() && candidate != request &&
+			candidate->get_can_bus_dev() == request->get_can_bus_dev() &&
+			candidate->get_id() == request->get_id());
+}
+
+
+/// @brief Returns true if there are no other active requests to the same arbitration ID
+/// and if there aren't more than 8 requests in flight at the same time.
+bool diagnostic_manager_t::clear_to_send(active_diagnostic_request_t* request) const
+{
+	int total_in_flight = 0;
+	for ( auto entry : non_recurring_requests_)
+	{
+		if(conflicting(request, entry))
+			return false;
+		if(entry->get_in_flight())
+			total_in_flight++;
+	}
+
+	for ( auto entry : recurring_requests_)
+	{
+		if(conflicting(request, entry))
+			return false;
+		if(entry->get_in_flight())
+			total_in_flight++;
+	}
+
+	if(total_in_flight > MAX_SIMULTANEOUS_IN_FLIGHT_REQUESTS)
+		return false;
+	return true;
+}
+
+int diagnostic_manager_t::reschedule_request(sd_event_source *s, uint64_t usec, active_diagnostic_request_t* adr)
+{
+	usec = usec + (uint64_t)(adr->get_frequency_clock().frequency_to_period());
+	DEBUG(binder_interface, "send_request: Event loop state: %d. usec: %ld", sd_event_get_state(afb_daemon_get_event_loop(binder_interface->daemon)), usec);
+	if(sd_event_source_set_time(s, usec) >= 0)
+		if(sd_event_source_set_enabled(s, SD_EVENT_ON) >= 0)
+			return 0;
+	sd_event_source_unref(s);
+	return -1;
+}
+
+/// @brief Systemd timer event callback use to send CAN messages at regular interval. Depending
+/// on the diagnostic message frequency.
+///
+/// This should be called from systemd binder event loop and the event is created on add_recurring_request
+///
+/// @param[in] s - Systemd event source pointer used to reschedule the new iteration.
+/// @param[in] usec - previous call timestamp in microseconds.
+/// @param[in] userdata - the DiagnosticRequest struct, use to retrieve the active request from the list.
+///
+/// @return positive integer if sent and rescheduled or negative value if something wrong. If an error occurs
+/// event will be disabled.
+int diagnostic_manager_t::send_request(sd_event_source *s, uint64_t usec, void *userdata)
+{
+	diagnostic_manager_t& dm = configuration_t::instance().get_diagnostic_manager();
+	DiagnosticRequest* request = (DiagnosticRequest*)userdata;
+	active_diagnostic_request_t* adr = dm.find_recurring_request(request);
+
+	dm.cleanup_active_requests(false);
+	if(adr != nullptr && adr->get_can_bus_dev() == dm.get_can_bus_dev() && adr->should_send() &&
+		dm.clear_to_send(adr))
+	{
+		adr->get_frequency_clock().tick();
+		start_diagnostic_request(&dm.shims_, adr->get_handle());
+		if(adr->get_handle()->completed && !adr->get_handle()->success)
+		{
+				ERROR(binder_interface, "send_request: Fatal error sending diagnostic request");
+				sd_event_source_unref(s);
+				return -1;
+		}
+
+		adr->get_timeout_clock().tick();
+		adr->set_in_flight(true);
+	}
+
+	if(adr != nullptr && adr->get_recurring())
+	{
+		return dm.reschedule_request(s, usec, adr);
+	}
+
+	sd_event_source_unref(s);
+	NOTICE(binder_interface, "send_request: Request doesn't exist anymore. Canceling.'");
+	return -2;
+}
+
+/// @brief Will decode the diagnostic response and build the final openxc_VehicleMessage to return.
+///
+/// @param[in] adr - A pointer to an active diagnostic request holding a valid diagnostic handle
+/// @param[in] response - The response to decode from which the Vehicle message will be built and returned
+///
+/// @return A filled openxc_VehicleMessage or a zeroed struct if there is an error.
+openxc_VehicleMessage diagnostic_manager_t::relay_diagnostic_response(active_diagnostic_request_t* adr, const DiagnosticResponse& response)
+{
+	openxc_VehicleMessage message = build_VehicleMessage();
+	float value = (float)diagnostic_payload_to_integer(&response);
+	if(adr->get_decoder() != nullptr)
+	{
+		value = adr->get_decoder()(&response, value);
+	}
+
+	if((response.success && strnlen(adr->get_name().c_str(), adr->get_name().size())) > 0)
+	{
+		// If name, include 'value' instead of payload, and leave of response
+		// details.
+		message = build_VehicleMessage(build_SimpleMessage(adr->get_name(), build_DynamicField(value)));
+	}
+	else
+	{
+		// If no name, send full details of response but still include 'value'
+		// instead of 'payload' if they provided a decoder. The one case you
+		// can't get is the full detailed response with 'value'. We could add
+		// another parameter for that but it's onerous to carry that around.
+		message = build_VehicleMessage(adr, response, value);
+	}
+
+	// If not success but completed then the pid isn't supported
+	if(!response.success)
+	{
+		std::vector<diagnostic_message_t*> found_signals;
+		configuration_t::instance().find_diagnostic_messages( build_DynamicField(adr->get_name()), found_signals );
+		found_signals.front()->set_supported(false);
+		cleanup_request(adr, true);
+		NOTICE(binder_interface, "relay_diagnostic_response: PID not supported or ill formed. Please unsubscribe from it. Error code : %d", response.negative_response_code);
+		message = build_VehicleMessage(build_SimpleMessage(adr->get_name(), build_DynamicField("This PID isn't supported by your vehicle.")));
+	}
+
+	if(adr->get_callback() != nullptr)
+	{
+		adr->get_callback()(adr, &response, value);
+	}
+
+	return message;
+}
+
+/// @brief Will take the CAN message and pass it to the receive functions that will process
+/// diagnostic handle for each active diagnostic request then depending on the result we will 
+/// return pass the diagnostic response to decode it.
+///
+/// @param[in] entry - A pointer to an active diagnostic request holding a valid diagnostic handle
+/// @param[in] cm - A raw CAN message.
+///
+/// @return A pointer to a filled openxc_VehicleMessage or a nullptr if nothing has been found.
+openxc_VehicleMessage diagnostic_manager_t::relay_diagnostic_handle(active_diagnostic_request_t* entry, const can_message_t& cm)
+{
+	DiagnosticResponse response = diagnostic_receive_can_frame(&shims_, entry->get_handle(), cm.get_id(), cm.get_data(), cm.get_length());
+	if(response.completed && entry->get_handle()->completed)
+	{
+		if(entry->get_handle()->success)
+			return relay_diagnostic_response(entry, response);
+	}
+	else if(!response.completed && response.multi_frame)
+	{
+		// Reset the timeout clock while completing the multi-frame receive
+		entry->get_timeout_clock().tick();
+	}
+
+	return build_VehicleMessage();
+}
+
+/// @brief Find the active diagnostic request with the correct DiagnosticRequestHandle
+/// member that will understand the CAN message using diagnostic_receive_can_frame function
+/// from UDS-C library. Then decode it with an ad-hoc method.
+///
+/// @param[in] cm - Raw CAN message received
+///
+/// @return VehicleMessage with decoded value.
+openxc_VehicleMessage diagnostic_manager_t::find_and_decode_adr(const can_message_t& cm)
+{
+	openxc_VehicleMessage vehicle_message = build_VehicleMessage();
+
+	for ( auto entry : non_recurring_requests_)
+	{
+		vehicle_message = relay_diagnostic_handle(entry, cm);
+		if (is_valid(vehicle_message))
+			return vehicle_message;
+	}
+
+	for ( auto entry : recurring_requests_)
+	{
+		vehicle_message = relay_diagnostic_handle(entry, cm);
+		if (is_valid(vehicle_message))
+			return vehicle_message;
+	}
+
+	return vehicle_message;
+}
+
+/// @brief Tell if the CAN message received is a diagnostic response.
+/// Request broadcast ID use 0x7DF and assigned ID goes from 0x7E0 to Ox7E7. That allows up to 8 ECU to respond 
+/// at the same time. The response is the assigned ID + 0x8, so response ID can goes from 0x7E8 to 0x7EF.
+///
+/// @param[in] cm - CAN message received from the socket.
+///
+/// @return True if the active diagnostic request match the response.
+bool diagnostic_manager_t::is_diagnostic_response(const can_message_t& cm)
+{
+	if (cm.get_id() >= 0x7e8 && cm.get_id() <= 0x7ef)
+			return true;
+	return false;
+}