Change directory architecture to use 2 separated projects.

Each projects, binder and generator, has to be compiled separatly.
CAN-binder will host high and low level binding
CAN-config-generator only the generator used for low level binding.
build.sh script just launch both build in their respective dir.

Change-Id: Ic77932660fcca507b23a631d4e4e790f608880ae
Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>

1 files changed, 108 insertions, 0 deletions

diff --git a/CAN-binder/low-can-binding/diagnostic/diagnostic-message.cpp b/CAN-binder/low-can-binding/diagnostic/diagnostic-message.cpp
new file mode 100644
index 00000000..6f615574
--- /dev/null
+++ b/CAN-binder/low-can-binding/diagnostic/diagnostic-message.cpp
@@ -0,0 +1,108 @@
+/*
+ * Copyright (C) 2015, 2016 "IoT.bzh"
+ * Author "Romain Forlot" <romain.forlot@iot.bzh>
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *	 http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#include <map>
+
+#include "diagnostic-message.hpp"
+
+#include "../configuration.hpp"
+#include "../utils/signals.hpp"
+
+const char *UNIT_NAMES[10] = {
+	"POURCENT",
+	"DEGREES_CELSIUS",
+	"KPA",
+	"RPM",
+	"GRAMS_SEC",
+	"SECONDS",
+	"KM",
+	"KM_H",
+	"PA",
+	"NM"
+};
+
+diagnostic_message_t::diagnostic_message_t(uint8_t pid, const std::string generic_name, const int min,
+	const int max, enum UNIT unit, float frequency,	DiagnosticResponseDecoder decoder,
+	DiagnosticResponseCallback callback, bool supported)
+	: pid_{pid}, generic_name_{generic_name}, min_{min}, max_{max}, unit_{unit},
+	frequency_{frequency}, decoder_{decoder}, callback_{callback}, supported_{supported}
+{}
+
+uint32_t diagnostic_message_t::get_pid()
+{
+	return (uint32_t)pid_;
+}
+
+const std::string& diagnostic_message_t::get_generic_name() const
+{
+	return generic_name_;
+}
+
+const std::string diagnostic_message_t::get_name() const
+{
+	return active_diagnostic_request_t::get_prefix() + "." + generic_name_;
+}
+
+float diagnostic_message_t::get_frequency() const
+{
+	return frequency_;
+}
+
+DiagnosticResponseDecoder diagnostic_message_t::get_decoder() const
+{
+	return decoder_;
+}
+DiagnosticResponseCallback diagnostic_message_t::get_callback() const
+{
+	return callback_;
+}
+
+bool diagnostic_message_t::get_supported() const
+{
+	return supported_;
+}
+
+void diagnostic_message_t::set_supported(bool value)
+{
+	supported_ = value;
+}
+
+///
+/// @brief Build a DiagnosticRequest struct to be passed
+///  to diagnostic manager instance.
+///
+const DiagnosticRequest diagnostic_message_t::build_diagnostic_request()
+{
+	return {/*arbitration_id: */OBD2_FUNCTIONAL_BROADCAST_ID,
+			/*mode: */0x1,
+			/*has_pid: */true,
+			/*pid: */pid_,
+			/*pid_length: */0,
+			/*payload[]: */{0},
+			/*payload_length: */0,
+			/*no_frame_padding: */false,
+			/*DiagnosticRequestType: */DiagnosticRequestType::DIAGNOSTIC_REQUEST_TYPE_PID };
+}
+
+///
+/// @brief Check if a request is an OBD-II PID request.
+///
+/// @return true if the request is a mode 1 request and it has a 1 byte PID.
+///
+bool diagnostic_message_t::is_obd2_request(const DiagnosticRequest* request)
+{
+	return request->mode == 0x1 && request->has_pid && request->pid < 0xff;
+}