aboutsummaryrefslogtreecommitdiffstats
path: root/README.md
diff options
context:
space:
mode:
authorRomain Forlot <romain.forlot@iot.bzh>2017-03-22 10:53:24 +0000
committerRomain Forlot <romain.forlot@iot.bzh>2017-03-22 10:59:13 +0000
commitad366bd680d5ce0bef49242cf6b3902fe46e0141 (patch)
treeae8b64e4694ca4387e65ff31e1ff68d43c148db7 /README.md
parent2fd3b90d2736e29932b8fc279e5424916c943c69 (diff)
Fix: typo
Change-Id: I0e0753a520471129987d26e0a03be732fc311d02 Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Diffstat (limited to 'README.md')
-rw-r--r--README.md14
1 files changed, 8 insertions, 6 deletions
diff --git a/README.md b/README.md
index a9625621..d24ce07e 100644
--- a/README.md
+++ b/README.md
@@ -8,6 +8,7 @@ As long this binding is based on [OpenXC vi-firmware](https://github.com/openxc/
The reference documentation of the JSON file can be found [here](https://github.com/openxc/vi-firmware/blob/master/docs/config/reference.rst).
## Getting started
+
### Build requirements
* CMake version 3.0 or later
@@ -19,7 +20,7 @@ The reference documentation of the JSON file can be found [here](https://github.
You can install any of these using your package manager. For instance, inside the iotbzh's docker image, you must enter this command :
- devel@bsp-devkit:~/$ sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-program-options-dev
+ sudo apt-get install libboost-system-dev libboost-filesystem-dev libboost-program-options-dev
You may want to install `libboost-all-dev` to get all boost components even if it's not required.
@@ -38,7 +39,7 @@ $ mkdir -p build
$ cd build
$ cmake -G "Unix Makefiles" ..
$ make
-</pre>
+```
### Naming convention
@@ -70,7 +71,7 @@ engine.oil.temperature
engine.torque
```
-> **NOTE** It's recommended that you follow this naming convention to named your CAN signals.
+> **NOTE** It's recommended that you follow this naming convention to name your CAN signals.
>
> There is only character `*` that is forbidden in names because it's used as wildcard for subscription and unsubscrition.
>
@@ -87,9 +88,10 @@ You can use some basic decoder provided by default by the binding which are:
## Generate your config file
To generate your config file you just have to run the generator using the `-m` option to specify your JSON file.
-<pre>
-<b>devel@bsp-devkit:~/projects/can-config-generator/build(master)$</b> can-config-generator -m ../tests/basic.json -o configuration-generated.cpp
-</pre>
+
+```bash
+./can-config-generator -m ../tests/basic.json -o configuration-generated.cpp
+```
If you omit the `-o` option, then code is generated on the stdout.
You also can specify a header and a footer file.