summaryrefslogtreecommitdiffstats
path: root/docs/3-Usage.md
diff options
context:
space:
mode:
authorArthur Guyader <arthur.guyader@iot.bzh>2019-05-24 12:17:12 +0200
committerRomain Forlot <romain.forlot@iot.bzh>2019-06-27 09:33:12 +0200
commitdd3e4788c11e65eb6c021520756a2e7eb4d7ddc7 (patch)
tree2e598c7167410c2521048286d797941216695787 /docs/3-Usage.md
parent1ad897412bef84e380a6eb31c00233a0b7f8cbe0 (diff)
Update the documentation for J1939.
Bug-AGL: SPEC-2386 Change-Id: Ice568aebb10cc6eb3d7ac013b2e6ce08451332ba Signed-off-by: Arthur Guyader <arthur.guyader@iot.bzh> Signed-off-by: Stephane Desneux <stephane.desneux@iot.bzh> Signed-off-by: Romain Forlot <romain.forlot@iot.bzh>
Diffstat (limited to 'docs/3-Usage.md')
-rw-r--r--docs/3-Usage.md371
1 files changed, 0 insertions, 371 deletions
diff --git a/docs/3-Usage.md b/docs/3-Usage.md
deleted file mode 100644
index daeca878..00000000
--- a/docs/3-Usage.md
+++ /dev/null
@@ -1,371 +0,0 @@
-# Configure the AGL system
-
-## Virtual CAN device
-
-Connected to the target, here is how to load the virtual CAN device driver and
-set up a new vcan device :
-
-```bash
-modprobe vcan
-ip link add vcan0 type vcan
-ip link set vcan0 up
-```
-
-You also can named your linux CAN device like you want and if you need name it
-`can0` :
-
-```bash
-modprobe vcan
-ip link add can0 type vcan
-ip link set can0 up
-```
-
-## CAN device using the USB CAN adapter
-
-Using real connection to CAN bus of your car using the USB CAN adapter
-connected to the OBD2 connector.
-
-Once connected, launch `dmesg` command and search which device to use:
-
-```bash
-dmesg
-[...]
-[ 131.871441] usb 1-3: new full-speed USB device number 4 using ohci-pci
-[ 161.860504] can: controller area network core (rev 20120528 abi 9)
-[ 161.860522] NET: Registered protocol family 29
-[ 177.561620] usb 1-3: USB disconnect, device number 4
-[ 191.061423] usb 1-2: USB disconnect, device number 3
-[ 196.095325] usb 1-2: new full-speed USB device number 5 using ohci-pci
-[ 327.568882] usb 1-2: USB disconnect, device number 5
-[ 428.594177] CAN device driver interface
-[ 1872.551543] usb 1-2: new full-speed USB device number 6 using ohci-pci
-[ 1872.809302] usb_8dev 1-2:1.0 can0: firmware: 1.7, hardware: 1.0
-[ 1872.809356] usbcore: registered new interface driver usb_8dev
-```
-
-Here device is named `can0`.
-
-This instruction assuming a speed of 500000kbps for your CAN bus, you can try
-others supported bitrate like 125000, 250000 if 500000 doesn't work:
-
-```bash
-ip link set can0 type can bitrate 500000
-ip link set can0 up
-ip link show can0
- can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UNKNOWN qlen 10
- link/can
- can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0
- bitrate 500000 sample-point 0.875
- tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1
- sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
- clock 16000000
-```
-
-On a Rcar Gen3 board, you'll have your CAN device as `can1` because `can0`
-already exists as an embedded device.
-
-The instructions will be the same:
-
-```bash
-ip link set can1 type can bitrate 500000
-ip link set can1 up
-ip link show can1
- can0: <NOARP,UP,LOWER_UP,ECHO> mtu 16 qdisc pfifo_fast state UNKNOWN qlen 10
- link/can
- can state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0
- bitrate 500000 sample-point 0.875
- tq 125 prop-seg 6 phase-seg1 7 phase-seg2 2 sjw 1
- sja1000: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1
- clock 16000000
-```
-
-## Rename an existing CAN device
-
-You can rename an existing CAN device using following command and doing so move
-an existing `can0` device to anything else and then use another device as `can0`
-. For a Rcar Gen3 board do the following by example:
-
-```bash
-sudo ip link set can0 down
-sudo ip link set can0 name bsp-can0
-sudo ip link set bsp-can0 up
-```
-
-Then connect your USB CAN device that will be named `can0` by default.
-
-# Configure the binding
-
-The binding reads system configuration file _/etc/dev-mapping.conf_ at start to
-map logical name from signals described in JSON file to linux devices name
-initialized by the system.
-
-Edit file _/etc/dev-mapping.conf_ and add mapping in section `CANbus-mapping`.
-
-Default binding configuration use a CAN bus named `hs` so you need to map it to
-the real one, here are some examples:
-
-* Using virtual CAN device as described in the previous chapter:
-
-```ini
-[CANbus-mapping]
-hs="vcan0"
-ls="vcan1"
-```
-
-* Using real CAN device, this example assume CAN bus traffic will be on can0.
-
-```ini
-[CANbus-mapping]
-hs="can0"
-ls="can1"
-```
-
-* On a Rcar Gen3 board there is an embedded CAN device so `can0` already exists. So you might want to use your USB CAN adapter plugged to the OBD2 connector, in this case use `can1`:
-
-```ini
-[CANbus-mapping]
-hs="can1"
-```
-
-> **CAUTION VERY IMPORTANT:** Make sure the CAN bus\(es\) you specify in your
-> configuration file match those specified in your generated source file with
-> the `CAN-config-generator`.
-
-# Run it, test it, use it.
-
-You can run the binding using **afm-util** tool, here is the classic way to go :
-
-```bash
-afm-util run low-can-service@4.0
-1
-```
-
-You can find instructions to use afm-util tool
-[here](../../reference/af-main/1-afm-daemons.html#using-afm-util),
- as well as documentation about Application Framework.
-
-But you can't control nor interact with it because you don't know security
-token that **Application Framework** gaves it at launch.
-
-So, to test it, it is better to launch the binding manually. In the following
-example, it will use port **1234** and left empty security token for testing
-purpose:
-
-```bash
-afb-daemon --binding=/var/lib/afm/applications/low-can-service/4.0/lib/afb-low-can.so --rootdir=/var/lib/afm/applications/low-can-service/4.0/ --port=1234 --token=1
-NOTICE: binding [/usr/lib/afb/afb-dbus-binding.so] calling registering function afbBindingV1Register
-NOTICE: binding /usr/lib/afb/afb-dbus-binding.so loaded with API prefix dbus
-NOTICE: binding [/usr/lib/afb/authLogin.so] calling registering function afbBindingV1Register
-NOTICE: binding /usr/lib/afb/authLogin.so loaded with API prefix auth
-NOTICE: binding [/var/lib/afm/applications/low-can-service/4.0/libs//low-can-binding.so] calling registering function afbBindingV1Register
-NOTICE: binding /var/lib/afm/applications/low-can-service/4.0/libs//low-can-binding.so loaded with API prefix low-can
-NOTICE: Waiting port=1234 rootdir=/var/lib/afm/applications/low-can-service/4.0/
-NOTICE: Browser URL= http:/*localhost:1234
-```
-
-On another terminal, connect to the binding using previously installed
-**AFB Websocket CLI** tool:
-
-```bash
-afb-client-demo ws://localhost:1234/api?token=1
-```
-
-You will be on an interactive session where you can communicate directly with
-the binding API.
-
-The binding provides at this moment 2 verbs, _subscribe_ and _unsubscribe_,
-which can take argument by a JSON **event** object.
-
-The argument value is the CAN message **generic\_name** as described in the
-JSON file used to generate cpp file for the binding.
-
-To use the _**AFB Websocket CLI**_ tool, a command line will be like the
-following:
-
-```
-<api> <verb> <arguments>
-```
-
-Where:
-
-* API : _**low-can**_.
-* Verb : _**subscribe**_ or _**unsubscribe**_
-* Arguments : _**{ "event": "driver.doors.open" }**_
-
-## Subscription and unsubscription
-
-You can ask to subscribe to chosen CAN event with a call to _subscribe_ API
-verb with the CAN messages name as JSON argument.
-
-> **NOTE:** If no argument is provided, then you'll subscribe to all signals
-> at once.
-
-For example from a websocket session:
-
-```json
-low-can subscribe { "event": "doors.driver.open" }
-ON-REPLY 1:low-can/subscribe: {"jtype":"afb-reply","request":{"status":"success","uuid":"a18fd375-b6fa-4c0e-a1d4-9d3955975ae8"}}
-```
-
-Subscription and unsubscription can take wildcard in their _event_ value.
-
-To receive all doors events :
-
-```json
-low-can subscribe { "event" : "doors*" }
-ON-REPLY 1:low-can/subscribe: {"jtype":"afb-reply","request":{"status":"success","uuid":"511c872e-d7f3-4f3b-89c2-aa9a3e9fbbdb"}}
-```
-
-Then you will receive an event each time a CAN message is decoded for the event
-named _doors.driver.open_ with its received timestamp if available:
-
-```json
-ON-EVENT low-can/messages.doors.driver.open({"event":"low-can\/messages.doors.driver.open","data":{"name":"messages.doors.driver.open","value":true, "timestamp": 1505812906020023},"jtype":"afb-event"})
-```
-
-Notice that event shows you that the CAN event is named
-_messages.doors.driver.open_ but you ask for event about
-_doors.driver.open_.
-
-This is because all CAN messages or diagnostic messages are prefixed by the
-JSON parent node name, **messages** for CAN messages and
-**diagnostic\_messages** for diagnostic messages like OBD2.
-
-This will let you subscribe or unsubcribe to all signals at once, not
-recommended, and better make filter on subscribe operation based upon their type. Examples:
-
-```json
-low-can subscribe { "event" : "*speed*" } --> will subscribe to all messages with speed in their name. Search will be make without prefix for it.
-low-can subscribe { "event" : "speed*" } --> will subscribe to all messages begin by speed in their name. Search will be make without prefix for it.
-low-can subscribe { "event" : "messages*speed*" } --> will subscribe to all CAN messages with speed in their name. Search will be on prefixed messages here.
-low-can subscribe { "event" : "messages*speed" } --> will subscribe to all CAN messages ending with speed in their name. Search will be on prefixed messages here.
-low-can subscribe { "event" : "diagnostic*speed*" } --> will subscribe to all diagnostic messages with speed in their name. Search will be on prefixed messages here.
-low-can subscribe { "event" : "diagnostic*speed" } --> will subscribe to all diagnostic messages ending with speed in their name. Search will be on prefixed messages here.
-```
-
-You can stop receiving event from it by unsubscribe the signal the same way you did for subscribe
-
-```json
-low-can unsubscribe { "event": "doors.driver.open" }
-ON-REPLY 2:low-can/unsubscribe: {"jtype":"afb-reply","request":{"status":"success"}}
-low-can unsubscribe { "event" : "doors*" }
-ON-REPLY 3:low-can/unsubscribe: {"jtype":"afb-reply","request":{"status":"success"}}
-```
-
-### Filtering capabilities
-
-It is possible to limits received event notifications into minimum and maximum
-boundaries as well as doing frequency thinning. This is possible using the
-argument filter with one or more of the filters available :
-
-* frequency: specify in Hertz the frequency which will be used to getting
- notified of new CAN events for the designated signal. If, during the blocked
- time, further changed CAN messages are received, the last valid one will be
- transferred after the lockout with a RX_CHANGED.
-* min: Minimum value that the decoded value needs to be above to get pushed to
- the subscribed client(s).
-* max: Maximum value that the decoded value needs to be below to get pushed to
- the subscribed client(s)
-
-Order doesn't matter neither the number of filters chosen, you can use one, two
-or all of them at once.
-
-Usage examples :
-
-```json
-low-can subscribe {"event": "messages.engine.speed", "filter": { "frequency": 3, "min": 1250, "max": 3500}}
-low-can subscribe {"event": "messages.engine.load", "filter": { "min": 30, "max": 100}}
-low-can subscribe {"event": "messages.vehicle.speed", "filter": { "frequency": 2}}
-```
-
-## Get last signal value and list of configured signals
-
-You can also ask for a particular signal value on one shot using **get** verb, like
-this:
-
-```json
-low-can get {"event": "messages.engine.speed"}
-ON-REPLY 1:low-can/get: {"response":[{"event":"messages.engine.speed","value":0}],"jtype":"afb-reply","request":{"status":"success"}}
-```
-
-> **CAUTION** Only one event could be requested.
-
-Also, if you want to know the supported CAN signals loaded by **low-can**, use
-verb **list**
-
-```json
-low-can list
-ON-REPLY 2:low-can/list: {"response":["messages.hvac.fan.speed","messages.hvac.temperature.left","messages.hvac.temperature.right","messages.hvac.temperature.average","messages.engine.speed","messages.fuel.level.low","messages.fuel.level","messages.vehicle.average.speed","messages.engine.oil.temp","messages.engine.oil.temp.high","messages.doors.boot.open","messages.doors.front_left.open","messages.doors.front_right.open","messages.doors.rear_left.open","messages.doors.rear_right.open","messages.windows.front_left.open","messages.windows.front_right.open","messages.windows.rear_left.open","messages.windows.rear_right.open","diagnostic_messages.engine.load","diagnostic_messages.engine.coolant.temperature","diagnostic_messages.fuel.pressure","diagnostic_messages.intake.manifold.pressure","diagnostic_messages.engine.speed","diagnostic_messages.vehicle.speed","diagnostic_messages.intake.air.temperature","diagnostic_messages.mass.airflow","diagnostic_messages.throttle.position","diagnostic_messages.running.time","diagnostic_messages.EGR.error","diagnostic_messages.fuel.level","diagnostic_messages.barometric.pressure","diagnostic_messages.ambient.air.temperature","diagnostic_messages.commanded.throttle.position","diagnostic_messages.ethanol.fuel.percentage","diagnostic_messages.accelerator.pedal.position","diagnostic_messages.hybrid.battery-pack.remaining.life","diagnostic_messages.engine.oil.temperature","diagnostic_messages.engine.fuel.rate","diagnostic_messages.engine.torque"],"jtype":"afb-reply","request":{"status":"success","uuid":"32df712a-c7fa-4d58-b70b-06a87f03566b"}}
-```
-
-## Write on CAN buses
-
-A new capability as been introcuded to be able to write on handled CAN buses.
-Two modes could be used for that which is either specifying the CAN bus and a
-*RAW* CAN message either by specifying a defined signal and its value.
-
-Examples:
-
-```json
-# Write a raw can frame to the CAN id 0x620
-low-can write { "bus_name": "hs", "frame": { "can_id": 1568, "can_dlc":
-8, "can_data": [ 255,255,255,255,255,255,255,255]} }
-# Write a signal's value.
-low-can write { "signal_name": "engine.speed", "signal_value": 1256}
-```
-
-To be able to use write capability, you need to add the permission
- ```urn:AGL:permission::platform:can:write``` to your package configuration
- file that need to write on CAN bus through **low-can** api.
-
-Then in order to write on bus, your app needs to call verb **auth**
-before calling **write**, to raise its **LOA**, Level Of Assurance,
-which controls usage of verb **write**.
-
-## Using CAN utils to monitor CAN activity
-
-You can watch CAN traffic and send custom CAN messages using can-utils
-preinstalled on AGL target.
-
-To watch watch going on a CAN bus use:
-
-```bash
-candump can0
-```
-
-Or for an USB CAN adapter connected to porter board:
-
-```bash
-candump can1
-```
-
-Send a custom message:
-
-```bash
-cansend can0 ID#DDDDAAAATTTTAAAA
-```
-
-You can also replay a previously dumped CAN logfiles. These logfiles can be
-found in _can_samples_ directory under Git repository. Following examples use
-a real trip from an Auris Toyota car.
-
-Trace has been recorded from a CAN device `can0` so you have to map it to the
-correct one you use for your tests.
-
-Replay on a virtual CAN device `vcan0`:
-
-```bash
-canplayer -I trip_test_with_obd2_vehicle_speed_requests vcan0=can0
-```
-
-Replay on a CAN device `can0`:
-
-```bash
-canplayer -I trip_test_with_obd2_vehicle_speed_requests can0
-```
-
-Replay on a CAN device `can1` (porter by example):
-
-```bash
-canplayer -I trip_test_with_obd2_vehicle_speed_requests can1=can0
-```